1/24 scale Enclosed Trailer Assembly by 3D Sleekun

[@andrewrichey7374]

That’s awesome dude, just got the trailer supposed to be the bigger one it measures 4 1/2 inches wide outside outside of trailer. I will be checking out one of these enclosed parts Hope I ordered the right one When I do

[@BrianSwayney]

thanks, actually the wide won't work with the enclosure, i may get the enclosures expanded to fit them at some point jus thaven't had to to go back and revisit it at this point.

[@danielfaamausili4393]

Great showcase video

[@zz-tama]

NIce🤩👍👍👍

[@mrz74813]

Just an FYI I had to modify the scx 24 fenders so they didn't rub the tires because of the screw that attaches the side panel.

[@SleekRC]

always appreciate feedback and while i'm not saying you didn't experience an issue, I haven't seen that problem, i know a number of people are using stock scx24 wheels and tires without any issues. the key is stock scx24 wheels as anything else may have different offsets (more or les offset) and different tires may be taller or wider than stock. the stock scx24 wheels/tires have plenty of space to clear the screws and fenders. so something sounds off.

[@mrz74813]

@sleekun the problem was the screw head made the fender sit an odd angle I attempted to find flush head screws as I build 1/24 through / 28th scale no luck so I decided to do a hole through the fender to lock the rear tab...I also made the bushings to where the tires continuously spin I luve the trailer and will be in contact for custom design great work keep it up

[@SleekRC]

@@mrz74813 thanks for that info. i still say it sounds like something is off and would love to have some pics if possible, you should have my contact info from the instructions and stuff provided. stock scx24 wheels/tires should fit direct with ZERO modification whatsoever so i'd love to see what's happening with it.

[@mrz74813]

@@SleekRC I will get you pics in the morning.

[@jameswalkera7987]

Can a scx24 jeep fit inside

[@SleekRC]

No, it will fit a kyosho mini z f1

[@Chettjacobson]

do you have any way to put suspension on the trailers?

[@SleekRC]

Not yet, maybe in version 2

[@allenpace1449]

can it fit a scx24 c10?

[@SleekRC]

No the size was made around a kyosho miniz racer, it will fit a miniz f1

[@allenpace1449]

@@SleekRC what trailer can fit a scx24

[@SleekRC]

@@allenpace1449 the open flat bed trailer you can set a scx24 on but I don't have an enclosed one that fits the scx24. The open flatbed version may be too narrow if you've put wide offsets on the scx24. I believe in my ebay listing I have a picture of the scx24 sitting on the flat trailer.

[@allenpace1449]

@@SleekRC thanks