1.4.7 Packet Tracer - Configure Router Interfaces

1.4.7 Packet Tracer - Configure Router Interfaces
Visit our Website: www.techacadhel...
Follow us on Facebook: / techacad4u

[@fanglessfish4133]

again and again - Tech Acad comes through --- best tutor ever

[@TechAcad]

Glad I could help!

[@hshshshunknown1377]

Tech Acad my saviourrrrrrr, my online class prof is not even teaching how to do activities they just handed as the cisco course and made us figure it out by ourselves lol good thing I found you! thank you so much!

[@TechAcad]

That is awesome!

[@theadhikarifamily3606]

Sir, You're an awesome tutor ! Since day 1 I've been watching your every cisco configurations video you've posted and I'm getting very interested to learn more about cisco switching and routing concepts. You're my real professor... Thank you so much for making this cisco learning very interesting .

[@TechAcad]

Great to hear!

[@numberiforgot]

Honestly sometimes Packet Tracer pings wont work even if you do them correctly. I'm glad there are resources online to guide you through these. It can get confusing and its easy to become frustrated.

[@TechAcad]

Yes, it happens. Just save and restart the packet tracer, it will work!

[@eggxecution]

Thanks for helping a slow learner student. It's hard to keep up with fast paced classes.

[@TechAcad]

Happy to help!

[@redmoose5553]

I though you had to create your own subnet table for the ipv6 addresses and I was so confused. I skipped to the part 2 and luckily with your explanation I realized that it's just assigning the ipv6 the same way you'd do with ipv4.

[@Joedymarz]

Thank you. Always so clear and helpful

[@TechAcad]

Glad it was helpful!

[@0MSDG0]

Thank you, Tech Acad!

[@TechAcad]

Welcome!

[@MargaDibaba-mf6lu]

Your video is very helpful. Thank you for that and at the same time would include from the beginning( i.e mean when you set up your packet racer it doesn't give full image because you started from the middle which is preconfigured.) In order to have full understanding, can you please, something from the initial to give or to have where you started?

[@TechAcad]

Thanks for the tip!

[@DawgDadAF]

Thank you so much for your videos!!!

[@TechAcad]

Glad you like them!

[@abetuna2707]

Thank you, youre the best, keep making these please!!!

[@TechAcad]

Thanks, will do!

[@Simon-ahuevo]

bro i love you , love from MEXICO

[@TechAcad]

Hi Thanks for your great support and sharing my dear friend...!!!

[@rapture_soon]

thank you so much! I have a question how do you determine that 255.255.255.128 is the subnet mask?

[@TechAcad]

Once you learn Subnetting, you will learn all these details. Thanks for your great support and sharing our channel with your friends...!

[@rapture_soon]

@@TechAcad thank you for the reply!

[@Yogandrew108]

I wish you would click CHECK RESULTS to verify that everything works. I always do this and it says that I have a mistake but I don't think I do and it would be helpful if you covered this issue or showed that I had make a mistake.

[@sentmallari190]

Nice one Thank u so much my brother!

[@TechAcad]

You're most welcome

[@inderjotsingh5391]

wow this helped me a lot

[@benschneider9500]

Love your content, is there any way you could do 12.5.13 Packet Tracer - Troubleshoot Enterprise Networks? It's a really long and complicated PT and I was hoping you could help us out by completing it. Thank you!

[@TechAcad]

I'll check it out

[@shyamsai8681]

Sir which router you have used in the practical sir?

[@chetankaushal9981]

why we wrote subnet mask as 128 at the end , where that 128 came from?

[@TechAcad]

Once we do the subnetting, the Subnet Mask also changes!

[@chetankaushal9981]

@@TechAcad then how do we get to know its 128 in the end

[@OscarHernandez-js3pk]

@@chetankaushal9981 Did you ever figure out where the "128" came from? i don't see it anywhere in the instructions lol

[@porkenbeans8256]

do you have a step by step ? on what are the icons that you used ?

[@optimalcynicism1650]

Thanks again friend.

[@TechAcad]

Thanks again!

[@skeemyweenus4995]

how and where do you find the subnet mask?

[@TechAcad]

Subnet Mask will be given in the activity. Otherwise Network Engineer will decide Network and Mask as per the requirements in real time. Thank you so much for your great support and sharing our channel with your friends...!!!

[@shellamaedaguimol6987]

Thankyou so much!

[@TechAcad]

Glad it helped!

[@krlos6360]

Thank you tech.

[@TechAcad]

You're welcome! And thanks for your great support and sharing!

[@SIA4TECH]

could you please arrange the playlist and make the videos in order 1.1.1, 1.1.2, 1.2, ....

[@TechAcad]

Hi All these are already in the playlists! Thanks for the great support!

[@SIA4TECH]

@@TechAcad yes but the order is mixed and beginners dont know which video comes first, second …

[@princesalvador8274]

This really fucking helps! Thank you a lot for sharing your knowledge!

[@maybenexttime8428]

Geez thank you ❤️❤️❤️❤️

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@johnkhairy384]

how downloads this Lab and when I click on it than it should go to directly to the Paket Tracer

[@flauschigerflausch46]

THX Buddy!!!

[@ChadwickVonGriffindorIII]

when I put fe:80::2 link-local in gigabit under R2, packet tracer tells me it's incorrect. I went from 92% done to 60% just making those changes.

[@TechAcad]

Hi make sure that given the correct command, in the correct interface mode Ex: R(config)#interface g0/0 R(config-if)#ipv6 FE80::2 link-local And thanks for your great support and sharing my dear friend....!!!!

[@lybitelcivilizacii5873]

Thx from Russian stuent :D

[@TechAcad]

Our pleasure! And thank you so much for your great support and sharing my dear friend...!!!

[@john3992]

Hello Tech Acad, always watching to you tutorials. I would like to ask if how you make the internet routers? How you merge two routers inside the cloud logo? Thanks and more powers

[@TechAcad]

There is an option called cluster in packet tracer! If you wish to get more details, you can contact us!

[@abdihalim7788]

Thanks for helping me out but i can't ping ipv4 address of pc1 and pc2 but i can ping ipv6 address of R2 , what could be the problem with router 1

[@abetuna2707]

when i configure the Gigabyte 0/1 for R2 using ipv6, i keep getting: Error: 2001:DB8:C0DE:13::/64 is overlapping with 2001:DB8:C0DE:13::/64 on GigabitEthernet0/0 , please help!!!

[@TechAcad]

You configured the same IPv6 Network address with another interface on the same router! Make sure that you give unique IPv6 Network address in the same router!

[@bluwhale9004]

really good merwyn did not send me this

[@TechAcad]

Glad it helped!

[@diegogarcilazo6321]

Thankyou alot.

[@TechAcad]

Glad it helped And thank you so much for your great support and sharing my dear friend...!!! If you wish to get any support, you can contact our team using our website.

[@friday8118]

Did anyone else's say destination host unreachable?

[@aracelilopez6765]

❤

[@tiruvaipatisreenivasarao5711]

At 3:16 i am not getting code

[@mareek4173]

si frajer

[@SinCityWayne]

👨‍💻😷✌🏽

[@TechAcad]

Thanks