(1/5) PixHawk Video Series - Simple initial setup, config and calibration

[@peterarnold8066]

Great video!! I've just bumbled my way through setting up a PixHawk and your first video would have saved me hours searching for missing information! Looking forward to the rest!!

[@Painless360]

Peter Arnold Powering the board, connecting ESCs, arming and initial hover next... Should be out next week.. Thanks for the feedback.

[@adarshbinoy5835]

DM ME IF ANYONE WANTS TO JOIN OUR WHATSAAP GROUP "diy drones". [phone]- whatsaap

[@EzeNnamdi-j7g]

How did you manage to set your battery configuration? I'm having issues with prearm battery 2 low voltage failsafe.

[@ashleyarundel3134]

7 years ago, and yet I’m still learning from you Lee! Painless360 is fully Mega. Thank You Man! 😀

[@alphaadhito]

A quite usefull trick for using the GPS for the first time is to put it outside or or simply near a window so it would track much much faster. I thought my GPS/Pixhawk was broken when i had that problem. Hope that helps ;-)

[@MrReeve1987]

omg your a life saver, im new to drone technology and jumped in at the deep end by designing my own vtol with unique features and your guides are going to be invalueble in the process.

[@josephvictor7519]

Hello Chris, can you provide me your email address ?

[@fahadalsaadi007]

I can't thank you enough for all the things have I learnt from you in RC world. Please continue , your are awesome.

[@hansdenbode]

Hello, I am a big fan of your explanation. This world of the drones is new to me. Good information is always very valuable. I would like to thank you for this clear explanation . Best regards, Hans

[@Painless360]

Thank you for the feedback. I do try and aim the content to be accessible for newer pilots and builders..

[@Toro-Tor]

Oh man, what a fantastic presentation. Thank you very much, it seems i finally found the right channel

[@Painless360]

Welcome! Happy flying!

[@Daniboy370]

Sir, your videos are undoubtedly the most helpful in this field

[@Painless360]

Thank you for the comment. Different people have different learning styles, background and experience so no one set of videos will be perfect for all audiences. It is always nice to hear from someone who has found the videos I make useful... Happy flying!

[@hiwayM9]

Many thanks to the mysterious "R" ....probably an associate of "M" perhaps? Shaken- not stirred, eh?

[@Painless360]

***** You eggspect me to tawk? (In mock Scottish/English accent) ;)

[@adarshbinoy5835]

DM ME IF ANYONE WANTS TO JOIN OUR WHATSAAP GROUP "diy drones". [phone]- whatsaap

[@secret_LK_7]

nice video and special thanks to the one who sends that pixhawk

[@djjinksy86]

Great job on the video, as well as everything you've released so far. You truly do make this hobby painless! A point of note for anyone upgrading from APM to Pixhawk... All of your existing peripherals will still work (GPS module, 3DR Telemetry, MinimOSD), however, you have to change the connectors from DF13 5 position to DF13 6 position plugs. The only item that can move over with no modification is the power module. There are tons of pictures online showing the exact pinouts, so the hardest part will be finding the plugs. My Pixhawk came with a few extra "spare" cables, so I just carefully harvested the ends off those and I was up and running quickly

[@DuaneMorrisPhotosByDuane]

Well I threw out my NAZA-M V2 stuff! I am now getting ready to set up this PixHawk. I'll be watching each video in the series and doing exactly what you say. I love how you make these videos for guys like me that are sorta new to all this tech. After I get this all figured out and flying on a DJI FlameWheel clone, I'll buy the PixHawk 2 and putting that on yet another DJI Flame Wheel clone. I love your videos, without them, I would never had tried anything! I flew my first quadcopter with a Naze32 because of your videos on it. Thank you PS: I have made it past the first hurdle, but with a few problems. My computer wouldn't recognize the USB connection (NAZA V2 did this too) and now I have it hooked up after doing everything manually (no Wizard). On to #2 in the series!

[@SHADEcovers]

I'm still waiting for my pixhawk which I've bought on the internet, but your video I've already added to my favorites. Thanks for uploading! 😀

[@digitalchaos1980]

It's 2020.....did you ever get it or are you STILL WAITING?? lolol

[@adarshbinoy5835]

DM ME IF ANYONE WANTS TO JOIN OUR WHATSAAP GROUP "diy drones". [phone]- whatsaap

[@mbrn-wm]

Finally a tech video without a weird accent

[@Painless360]

This video is over 4 years old and my channel has been going for over 12 years. Where have you been? ;) Glad you found the content. Happy flying!

[@maxp9793]

Very well done! You answered all of my questions and gave me a thorough understanding of the Pixhawk.

[@tushargupta1968]

Thanks R, because of you I was able to learn about pixhawk :)

[@blackmennewstyle]

Thanks for the first video of the serie on the Pixhawk :) Have a great weekend

[@HughD]

Thanks so much for this. I've had a Pixhawk for a few weeks and will now install it. Thanks for using the Taranis, too. Looking forward to the next one.

[@arminm5718]

This is a deep video on PixHawk. I really like it!

[@XobyOne]

Thank you for the time you took to make these videos!.

[@jimmcminnsr6309]

Thank you for this series of videos on the Pixhawk 2.4.8, It's a great help.

[@mikecollins767]

Just the sort of thing I have been looking for. Great stuff and keep them coming.

[@shaydon7315]

It's worth mentioning control directions in radio calibration aileron and rudder are obvious but elevator is reversed to what you think and not same direction as throttle i.e. full forward throttle - green bar goes to top, full forward elevator - green bar should go down

[@sidneyking11]

My first thought that came to mind if there was some kind of PCB used for failover to a fully charged battery for the controls to land with. That would be cool. You still would be able to glide down and land. I enjoy your videos and fell sorry for the lost of your airplane. I differently know that feeling walking to get the crashed airplane.

[@Funnyz2030]

Very excellent, clear explanation of your follower from Saudi

[@kirk0270]

Thank you! Your video is quite educational. I'm preparing for my first build.

[@southpark5555]

Great video. 10 out of 10 from me. Thanks for your time and effort with making it. And thanks to 'R' for sending the pixhawk.

[@Painless360]

Glad you liked it, there are more in this series. Check out the playlist. Happy flying!

[@southpark5555]

Thanks PL360!! The only warning for newbies (and I'm one of them) is.... the firmware for pixhawk. I used the mission planner software to load the quadcopter firmware into the pixhawk. But once that was done, the pixhawk got a red solid LED coming on (after each manual power-up), and had three beeps...one higher tone, followed by two low tones. I thought I had broken my pixhawk. I then needed to go to qgroundcontrol.com/ to install the Qgroundcontrol software, which provided two options - a pixhawk firmware and an ardupilot firmware. I chose the pixhaw firmware..... which loaded into my pixhawk 2.4.6, which revived all functions. I was then able to start up Mission Planner and connect to the pixhawk. Just mentioning this in case some newbies get a heart attack after loading the ardupilot firmware into their pixhawk. Otherwise, fantastic! Thanks again! Love your video and very easy-to-follow guidance with the sensors setup!

[@southpark5555]

UPDATE: This morning, I took a punt and tried one more time to use Mission Planner to upload the copter 3.4.4 firmware. And it surprised me that the firmware not only uploaded, but the pixhawk 2.4.6 was also operating properly. Thanks!

[@birdmantelly007]

Joy oh Joy My new Pixhawk is working. Thankyou !!!

[@aeroraheem]

Thanks for sharing informative video, I started learning about pix hawk from your video.

[@ZXRulezzz]

I can't quite make the sense out of what you're saying @ 7:27 "...absolutely pressed home (?) before we plug it into a computer". Do you mean that I'll have problems connecting Pixhawk to a Mission Planner if there's no SD card in it? I'm thinking about trying out Pixhawk after Naze32/Cleanflight, which I never got the chance to setup properly, because I broke a couple of beams and half a dozen props trying to tune it at home, and when I got it to fly somewhat, it still wasn't flying as stable as Naza M Lite that my dad uses on his own quad.

[@Painless360]

Make sure the SD card is plugged in so you hear the click. We answer your second question in the video - if it's not then it won't flash with new firmware. Happy flying!

[@ZXRulezzz]

Painless360 Thank you :)

[@andreamontani9266]

okkey. I also opened a ticket with 3DR. I will keep you informed. thanks a lot. regards and ciao Andrea

[@MrSilverback62]

Calibrations will need to be repeated when it is mounted on the quad. Motors and escs will throw them off. The Pixhawk will compensate after the recal.

[@Painless360]

Chuckles It will - all covered in the second video after mounting to the chassis ;)

[@kbikerider8474]

Great video painless. right on spot.

[@kyriacoscrassides2553]

Can't wait to watch the next video. Great job.

[@robots-osokorkiosokorki1677]

thank you for this video. coming back to Pixhawk, after 2 years, as the first try was not success )))

[@AJ-he8ki]

Hi, my radio does not pick up on the Radio Calibration part of Mission Planner. It seems like it's bound fine to the receiver, since I tested it with a servo motor and it responded fine. However, when receiver is plugged into the Pixhawk (Via RCIN) and radio is turned on, there are no green bars showing up on Mission Planner, despite the receiver showing a steady orange light. Do you think this is a problem with the radio or the Pixhawk itself or something else? I'm only in Highschool and extremely new to drones, and I've been stuck on this for a while. Any response would be awesome. Radio: OrangeRx Tx6i Mode 1 Int'l Version 6ch 2.4GHz DSM2/DSMX Compatible Radio System Receiver: OrangeRx R615X DSM2/DSMX Compatible 6Ch 2.4GHz Receiver w/CPPM

[@Painless360]

Check what protocol you need for the RCIN port. I use SBUS for that here so I would be suggest you need an RX with SBUS too... Best of luck

[@MasboyRC]

Nice tutorial video, it's so helpful for rc plane builders. I appreciate it 👍

[@Painless360]

Thanks. Check out the latest Arduplane 2020 series for an up to date series... Happy flying!

[@andreamontani9266]

Thank you. We will try the first fly on saturday. I did the setup including gps block. if I want to fly without, may I remove it and fly or have I to setup again the board without external gpd and compass module? Thanks for your time. Regards Andrea Montani

[@Painless360]

+Andrea Montani You could try but I would not try and fly a model without everything tested and working. Best of luck.

[@WASRT001]

Enjoying your video . I know you're speaking about aircraft but I'm making an autonomous boat and I simply want to control the rudder and tell it to sail waypoint to waypoint. Obviously a GPS input is needed. What other hardware to you recommend? I don't need motor control of any kind. The motors will be running solar and will be on all the time. I simply need rudder control for the waypoints. Thanks, I'm just learning and appreciate your wonderful teaching ability on this video. I'll watch the entire serious but wanted to throw out this questions first. Thanks in advance. Steve

[@Painless360]

Check out the Ardupilot wiki as they have a whole section on Arduboat. I may make a series on boats in the future. Stay tuned!

[@Zippytez]

If you are still working on this, it may be worth looking into a forward/reverse relay for the motor(s). This would allow for two directions and if you have two motors, some steering. You could also wire the motors in series and just have forward/reverse with a rudder. I would think this would be your best option, as using two motors to steer would take a while, especially if it is on solar only

[@grahamprice2]

Many thanks for another excellent video. Just spent a few weeks building an F450 using a Flysky Fs-i6s Tx with no problems at all, just a small amount of trim on the elevator and it flies perfectly.

[@crafti_fyx]

Which receiver did you use and if its fsia6b how did you connect it to the pixhawk

[@BlueSquadMonkes18]

I have spent hours trying to set my f550 up to no avail, is there a video on configuring this up with a futaba t8fg super remote? I am extremely frustrated . Thanks

[@Painless360]

I don't use Futaba here but I have recent series on Arducopter setup.. Best of luck

[@DaniVegaHRC]

Please, could you publish the end of that video in where you wanted to explain how to setup the failsafe ? Also can be great if you make in that video how to configure a OSD to be viewed on a FPV monitor Thanks in advance by all I airing your great videos Daniel

[@Painless360]

Please see one of the more modern 'Pixhawk' series on the channel. This series is out of date..

[@NimeshPatel1o]

Hi, i am new to this and using a pixhawk 2.4.8 as my flight controller, but I am facing issues with the correct firmware for a plane frame type. It gives me a error at ESC calibration stage- "set param error. Please ensure your your version is AC3.3+". I have tried multiple firmware options but same error always. Though it works well with arducopter heli firmware setup. I would be great if you could help me with this issue?

[@Painless360]

Lots about this in the forums but I've not seen it here. Looks version related from that I can see. Best of luck!

[@MrAlexfolgore]

grazie mille! finalmente un tutor chiaro...

[@Painless360]

+Alessandro Colangeli Siete i benvenuti, sono contento che lo ha aiutato. Volo felice!

[@HughD]

I'm looking forward to the next one covering the power options. I don't want to use the power module and when I connect to the servo rail it appears to work fine, but I get a low voltage alarm that I think is a Parameter setting rather than actual low voltage. Anyway, I hope you'll show this option/setup, too, please.

[@Painless360]

Hugh Dinwiddie That sounds like the alarm for the flight battery. I would disable the alarm in mission planner.. (copter.ardupilot.com/wiki/configuration/failsafe-battery/) Hope that helps.

[@OhioHydroGardener]

Hugh Dinwiddie I am also interested in any video describing exactly what is needed to power the Pixhawk correctly since I was instructed that if I use a 6S battery I was not to use the standard power module, but the 180A Attopilot module and use a BEC to power the servo rail and incorporate a Zener diode correctly. Since I have hacked the DF13 cable to use only the three wires (current, voltage and ground) I now rely on a BEC to power the the Pixhawk via the servo rail, but I have power retracts on my X8R receiver (ch9/10) and I locked up the Pixhawk causing a crash since I have no backup power (redundancy). So, is there a video describing the proper wiring of power backup to the Pixhawk servo rail correctly, possibly using two BECs and how to make sure I have the Zener diode/s wired in correctly? (I have seen the diagrams and wiring a diode in line makes no sense as I think extra voltage should be shunted to ground). The craft is flying well, but I would like to use the retracts (or any servo) obviously without a burnout, or power drop.

[@Painless360]

This is all covered in the on line docs. The standard PM only supports up to 4s LIPO. You can power it using the pins on the PM port and a switching UBEC and/or plug another +5v UBEC into the servo pins for redundancy (use a zener diode for overvoltage protection) This will help you -copter.ardupilot.com/wiki/common-optional-hardware/common-powermodule-landingpage/common-using-a-pixhawk-with-6s-batteries/ Best of luck with it.

[@OhioHydroGardener]

Yes, it is all covered in the online docs. I have read and reread all this and more and I just wondered if you would be actually demonstrating the wiring as I have done what they describe and now I'm waiting on China to send me the parts I need to FIX what I have ruined after I followed the instructions. :)

[@Painless360]

I will not be covering 6s packs on here. I don't fly ^s on anything but a 500class heli. If I were to use a 6s pack on a PixHawk I would do something very similar to you - UBEC into output pins to power servos and other high current devices (with diode) and also provide secondary power, install another 6s capable UBEC/PDB into the PM port on the Pixhawk. Sorry I can't add any more - best of luck with it.

[@mkolesnik]

beginner's question. What happens if during autonomous, programmed flight pixhawk looses radio reception (turn off taranis). Will program continue or automatic RTH kicks in, or maybe FrShuts off motors? Thanks so much! Great videos!

[@Painless360]

+mkolesnik The documentation makes a decent job of covering this so I'd recommend a read through it you're interested. The simple answer is that the failsafe happens when either a LIPO or radio problem occurs. You can then get it to RTH or LAND or even continue with the mission.. Happy flying!

[@texmcfaden1070]

Great instructional video. Very detailed and complete. Still relevant in NOV2017 to understanding Pixhawk and its setup. Any thumbs-down votes are clearly the work of idiots savants, as there is zero reason to give this a thumbs-down. These are among some of the most well-done instructional videos I've come across and I definitely appreciate the time, effort, charts, detailed explanations and history of the APM evolution to PX4 to Pixhawk. This is must-view video for everyone new to UAS.

[@Painless360]

+Tex McFaden thanks for taking the time to write that comment, it's always great to hear from those who get something from the videos. Happy flying

[@daves4107]

great sfuff. Just one question does the elavator chanel have to be reversed like on a apm 2.- thanks

[@Painless360]

dave s All covered in the next video ;)

[@dhasarathisrikrishna2335]

Hi, i'm using a FlySky I6X transmitter/reciever and i'm connecting the reciever to the pixhawk, via RCin and PPM/CH1 on the reciever. the transmitter is bound with the reciever, however i'm not getting any readings on the radio calibration stage. There are no bars, how do i fix this? thanks

[@Satamanster]

Hi! I am trying to setup this on my bixler and I was wondering what channel should I put the flaps on? I watched this and the taranis video but Im still clueless. Is hard to go trough this series and have it adapted to a plane. Thank u in advance. Also is the telemetry radio mandatory to get a good experience with thr pixhawk? Thank you for all the great content.

[@Painless360]

ardupilot.org/plane/docs/automatic-flaps.html covers it if you want to make them automatic. You can run them from the reciever directly or foward a channel to the flaps via a spare PWM output. See the latest Arduplane build on the channel. Best of luck with it..

[@TECHNDJ]

Ur pixhawk seems to be like a clone version. Did u face any issues during long flights like in stability of gyro, or program incompatibility?

[@Painless360]

No but these videos were made a long time ago. Modern clones may be of different quality.. Best of luck

[@TECHNDJ]

@@Painless360 thx.♥️

[@paulmcmahon1774]

Hi I would like to know where I can buy this exact Pixhawk you are using in the video ,I want to build a quad and a Tri copter ,BTW great videos ,if you could put a link as to where I can purchase it ,Thanks.there seems to be a few different versions out there ? I only want the GPS version like in your video.

[@Painless360]

+Paul McMahon No idea sorry. This was a donation for the series. Places like Banggood.com and HobbyKing stock them.. Best of luck.

[@vladimirlapygin2538]

+Paul McMahon Paul, you can get one @ Banggood for £55.92 www.banggood.com/buy/pixhawk-px4.html I found it on www.parkflyer.ru/101362/product/1562549/ with additional modules ))

[@stevec2196]

+Paul McMahon I wouldn't buy a Pixhawk, they are very flaky and hard to get working. I have 2 of them I've been trying to get working for over a year and a half without any success so far. Sure, all the fanboys say they are so great and have tons of fake videos on KZbin showing them flying so well but it's all a lie!

[@fredcheshire4661]

I just ordered one of these. I have the D4R receiver and a taranis. is there any special steps or connections that need to be made to get telemetry data to the taranis? Thank you! BTW I love your videos best quad tutorials on the youtubes!

[@Painless360]

It's changing all the time - finally the APM/Pixhawk developers have woken up to the huge number of pilots who want it - pixhawk.org/peripherals/telemetry/frsky Best of luck!

[@fredcheshire4661]

Painless360 I orders the telemetry cable today from www.craftandtheoryllc.com/product/pixhawk-to-frsky-telemetry-cable-d4r-ii-receiver/. Also ordered their lua script for the taranis. Should be fun. Thanks again!

[@Cephas2904]

Great video! Just wanted to ask, my i2c connector & wires are gutted. Can I use the GPS without the i2c since the pixhawk already has an internal compass?

[@Painless360]

I wouldn't. That interval compass is too net everything else... Best of luck

[@claudiufarcas]

Like always, we love very much your instructional videos. Thumbs up!

[@Painless360]

Claudiu Farcas Thanks you.

[@sqlacademy]

My Pixhawk Main out Pin 4 is not moving the motor 4(back right - clock-wise), can you please help me on how I can use other available pins like 5,6,7,8, in pixhawk 2.4.8 and assign it channel 4. I am not able to get any document which can help on swapping the pins. It'll be a great help. Also my motor 4 is working when connected to main out pin 1,2,3 of pixhawk. I am using FSi6 TX with FSiA6B RX.

[@supercobrapro7470]

Dear Sir, What's the difference between this version and Radiolink version?

[@Painless360]

I've not used the Radiolink version... Happy flying

[@supercobrapro7470]

what's the difference between this and Pixhawk Pro version?

[@stefi300972]

thanks for your videos, i started this last July and got totally no where, tried kk2, apm 2.6 and 2.8 and gave up, then came across your videos so i dragged everything out of the cupboard and tried again and succeeded in under 5 hours, flys great, last time i tried it went always skimmed sideways then flipped over and crashed without fail.please keep them coming and maybe add the 6 position switch for Turnigy 9x on ER9X and 9Xtreme as i struggled with that for several days as many videos out there worked for them but i only got 5 of the six flight modes working despite the transmitter clearly showing 6.

[@Painless360]

+s See our videos where we've added modes to other radios - the problem comes from the fact that the ranges for the modes are not equally spaced and a lot of the controls on a radio assume they are.. Best of luck!

[@sgan5551]

Hello Sir, your videos are very well crafted for beginners like me. I can't thank you enough for all you do. I am newbie to Drone building DIY. I have Pixhawk 2.4.8 and wanted to use it with 4-in-1 ESC along with Raspberry PI 4 or 5. I watched all the videos out there on this scenario and all of them uses individual ESC's for each motors. I came across encoder to use but surely not understand it. I saw some video about connecting Raspberry PI to Pixhawk so I think I am okay there but not connecting 4-in-1 ESC to Pixhawk. Would you be able to suggest how I can get 4-in-1 ESC connected to Pixhawk? Or if you could do a video on it, would be awesome. Thank you so much for all your help in advance sir.

[@Painless360]

The wiring of the ESCs isn't that different. Each has a signal wire but all use a single common. GND wire.... Best of luck

[@dronesvisionsaeriennes]

Hi Painless i come back to your videos because i 've found a lot of version of Pixhawk on the internet...if i correctly understood yours explanations Px4 became Pixhawk...but i don't understand the differences between FMU and i/o....are they in the same controler board "Pixhawk" or may i buy many modules to get them and to wire together...? Best regards Philippe

[@Painless360]

+Drones Visions Aériennes I'd buy the same as in the video - we don't have experience with PX4 or other variants..

[@ScottLarsenThePilotwingsFan]

Hi! I'm following along in this series to set up my first GPS drone. I have a radiomaster tx16s bound to a spektrum satellite receiver, but the Pixhawk doesn't recognize inputs from the transmitter. Have you encountered this problem before?

[@Painless360]

I don't use Spektrum here, and sadly they don't seem to support widely used protocols like SBUS on their receivers. I'd look for a compatible receiver that will output SBUS for this project. Best of luck.

[@andreamontani9266]

Many thanks for your videos.I am building up a fixed wing drone by using a pixhawk as flight controll. The first proto will have an electric motor and I think I will have no issue to manage it by pixhawk. In a second step I would use a gas engine in order to increas the drone range. Is it possible to manage a gas engine by pixhawk? which kind of servo have I to use in order to manage the throttle butterfly (digital servo instead of an ESC)? Thanks a lot for your help. I apologize for my poor english.regardsAndrea Montani

[@Painless360]

+Andrea Montani I don't use IC motors here so can't comment. I think there is something on this in the Pixhawk/Mission Planner Wikis and manuals - best of luck.

[@andreamontani9266]

Thank you. I will give a look. See you soon.

[@bteam9088]

Hello, great video, however we have a problem: we have followed all your steps up to the part were we have to connect the Pixhawk. Unfortunately, once we pressed connect, all of the numbers remained zero, and the map didn't update with our GPS position. We are using the Mac version of the APM planner. Thank you for your attention

[@Painless360]

+B Team sorry, I don't use Macs here... Best of luck!

[@alimalcok]

Thank you very much bro, video concept is awasome

[@Painless360]

Check out the Pixhawk 2020 series too... Happy flying

[@alimalcok]

@@Painless360 thank you, ı will

[@HuwFerris-John]

there arent any videos running through setup on a wing such as a mini talon, would you consider covering this please?

[@Painless360]

+Huw John thanks for the idea, I will add it to the list. We have added an APM to a plane in that series and the process is almost identical. Best of luck!

[@HuwFerris-John]

Painless360 thank you. I'm mainly having trouble with the safety button. unable to arm it without disabling on startup.

[@alessandronocerino9748]

Hello, I've seen your video, however , on initial setup, while doing the radio calibration, the green bars don't appear and i can't manage to calibrate the rc. I am using an FSi6 transmitter, with a FSiA6B receiver.The light on the receiver is steady and red, and i think they are binded correctly because i can see the battery status of the receiver on the transmitter. I would really appreciate a help from you, Thanks in advance

[@נהורוייס]

hi, can i connect to this pixhwak gps - nano Ublox m8 5883 gps ?

[@Painless360]

I've only used the compass modules that are designed to plug I ot the Pixhawk. In theory any decent compass/GPS model should work... Best of luck

[@carlosjosesanchezpernia2042]

. Thanks for answering my question is whether it is better PixHawk system or a telemetry system 433 mhz and if necessary to install a FPV system to see where is the plane and also a separate system that can take pictures georeferenced to make plans with these pictures .... thanks

[@Painless360]

+CARLOS JOSE SANCHEZ PERNIA A few questions there, let me try and give you a quick answer to each. The telemetry systems works with the Pixhawk - you need both. The Pixhawk is the part that can fly a pre-set 'mission' for things like taking pictures and supports Geofencing. See out Pixhawk videos and take a look at ArduCopter. Best of luck.

[@swlroboticsinc1855]

Do you know if the PixHawk4 would work with the AR12310T?

[@dindin247]

Your video are very good! thank so much. Please help I am stuck at calibrating radio connection. I have taranis, plus but my receiver led doesn't turn green/no connection. do you have to setup the taranis first before auto detection? also, do i have to restart all the calibration steps if i didn't finish the first time or does it save your progress to memory/firmware?

[@JerryPrado]

Thanks for the great videos. They have gotten me in the air going back to the early electric heli days. I'm having a problem: No matter what I do, if I set up the radio for AETRM, the throttle and elevator are exchanged when I go to calibrate in Mission Planner. This is is on a pre-owned Taranis X9E with the Hall Effect gimbals. I'm wondering if this is a mode 1 radio and when the previous owner upgraded the gimbals, he simply set it up as a mode 2. If I set the radio up as ATERM, the calibrate routine responds as expected. Any thoughts?

[@Painless360]

Sounds like you are a little new to the radio and OpenTx. Check in the mixer section of the radio and you'll see that those outputs are swapped. You can move them to be anything you want. See my OpenTX mix school videos. Best of luck!

[@chazm3656]

Forgot to mention In mission planner the errors are (Inconsistant compass) for the external compass I have it plugged in right -gps to gps and the compass in I2c

[@andreamontani9266]

by using your video we built up a tricopter using a pixhawk controller. After first problems Now it works very well. during RTL mode the tricopter works well but the landing Point is not exaclty the take off Point , there is a tolerance around 2m. is there a parameter to set this Radius? The one in waypoit? Thanks and Regards Andrea Montani

[@Painless360]

+Andrea Montani that's normal. Happy flying!

[@Jaaaaaaaaaaaaaaay]

Excellent, excellent video. Quick question if I may ? If I have a frame (TBS Disco Pro) where the Pixhawk can't be mounted exactly at the COG should I wait and do the initial setup and calibrations after installing it in the craft, or is it better do it beforehand like in this vid ? Cheers.

[@Painless360]

Jaaaaaaaaaaaaaaay I always setup the board to make sure it's ok before installing it. I then re-calibrate the acc and mag with it's all fitted. Happy flying!

[@Jaaaaaaaaaaaaaaay]

That makes sense. Thanks :)

[@plugtheheliflyer]

Thanks Painless and others will give a try on different pc.

[@davektowner]

hi painless, love the videos, totally convinced me now to go down the pixhawk road for my next FC.... Quick question though..thinking about damping for the vibration issue, rather then buying an anti-vibration mount, i was wandering if there is space inside the case to drill some holes in the bottom plate of the case and mount some silicone anti-vibration balls directly to the case itself...... or is the circuit board too close to the inside of the bottom plate. thanks for the great videos... big fan

[@Painless360]

+Dave Towner really depends on the case. The anti vibration mounts made for these work great though.. best of luck!

[@bradsamers3014]

Lee would you know if there are currently any flight controllers on the market that can be ‘doubled up’ and connected into a single multicopter to act as a dual-redundancy system? Each flight controller would also have its own GPS unit for additional fail safe measures. Thanks in advance

[@Painless360]

+Brad Samers I think I've already answered this - no need to post twice.. Happy flying!

[@globaldesi2956]

So I have 4 ESC flashed with miltishot protocol , is it going to work with pixhawk , I don't wanna smok off my ESC

[@dronesvisionsaeriennes]

Hi Painless, i've shown your PIXHAWK PX4 video serie thank's for that....but i didn't seen how to wire a video transmitter on it....May we connect any video TX ( from Dji AVL 58 for example ) or a specific for PX4.... Best regards Philippe

[@Painless360]

+Drones Visions Aériennes You would need to setup and add an MininOSD and connect that to the camera, Vtx and Pixhawk. See the wiki for details. We so setup an APM with this on the channel and it's almost identical..

[@dronesvisionsaeriennes]

+Painless360 sorry but what do you mean. ...wiki...? thank a lot

[@Painless360]

The online manual ;)

[@mixed_media00]

Hi, nice tutorial series youve provided. But id like to ask, do you have an idea how can i connect this to database? Like the scenario, is i want to store captured images into the database. Something like that.

[@Painless360]

Yes you can. Check out the mapping and surveying detail in the documentation.. happy flying!

[@mixed_media00]

@@Painless360 Documentation where to find? :) Thank you.

[@Painless360]

Yes - kzbin.info/www/bejne/hmXWoIVshsyCoZI hope it helps.

[@sanderhenriksen4725]

will this pixhawk work for a rover or a boat? Great video!

[@chopperwright]

Really helpful and clear. Many thanks

[@DaniVegaHRC]

good nigth , please would you recomend witch one of the videos of 2023 series is? thanks so much in advance, I have discover your channel recently and I see you have to much videos, maybe you know directly what video I need to see.

[@Painless360]

Arducopter/Pixhawk for beginners Series (2023): kzbin.info/aero/PLYsWjANuAm4rXSCRfiZkpuBmUP0u-lLby

[@DaniVegaHRC]

Please, can you help? Good morning Do you know What protocol is using esc T-Motor Air 20A? Im having a problem because Im building a drone with FC PixHawk 2.4.8 and through Mission Planner I can not make the motor test, I’m doing all exactly as I did other times or you in your videos before to build a drone with PixHawk, but this time is like the esc don’t take the signal from the FC PixHawk. Please, can you help to me ? I will be very appreciated Thanks so much in advance Can I send to you a video to show you how all is well connected? And the noise that esc do? Is like. It get signal from the fc, also the mission planner to the noise codes as if it’s doing the motor calibration till the end of the process , but the motors doesn’t spin. Best wishes Daniel

[@KalterKrieger]

The problem ist, that the orietation of compass chip is unknown for most gps modules. (In mine is is logically 45 degree rolled and 180 deg flipped) Therefore you dont know how to set up the Rotation. This is really somwhat strange but it works in any direction when set "Automatically learn offsets".

[@stevehobson1288]

ok it would seam that in the south Lancaster we have something up setting electronic compass just set up the pixhawh in Manchester and north is correct on mission planner ???

[@Painless360]

+Steve Hobson local anomaly? ;) bad day for the compass? Happy flying!

[@johnnyserafini391]

Hi Painless360, I am configuring my first Pixhawk. I am following your tutorial closely, but am not able to connect my radio to the Pixhawk controller. Is the Fly Sky FS-R6B radio receiver compatible with the Pixhawk? If not, what radio and receiver do you advise I get? Thank you for your time.

[@Painless360]

Is the receiver PPM or S-Bus?

[@johnnyserafini391]

I have a 6 channel PPM receiver and the Fly Sky FS-T6, 6 channel radio transmitter. Thank you for your help.

[@leahlee6563]

Wow Your vedio is very useful and brilliant!! But, my frame is slightly diferrent so I can't find the exactly right shape when I choose on airframe section. My frame is very similar with "Quadrotor * tailsitter" but I have another motor on tail side Could you please tell me how to fix this?

[@Painless360]

Not sure of the model layout you are describing. I've never had a model style that was not in the supported list in Ardupilot. I'd ask in the forums about this one as I honestly don't know the best way to go about it..

[@leahlee6563]

@@Painless360 Thank you so much!

[@DRONENEWS]

Hello, could you tell me why my EFK only turns red? another thing is that when I put all the accelerator bump and pich the same disarms the engines, just remembering that these tests the same is on the ground?

[@guglielmodicarlo4139]

hi, I noticed your using the taranus radio receiver, it obviously has spps or sbuss, my question is do all receivers have this capability, ? i currently have a FlySky 8 channel can most common receivers be used, or do you need a particular receiver set up

[@Painless360]

+Elmo Di Calro Some do, some don't. See the details for the receiver you are looking at to find out what it has.. Best of luck.

[@lefort5206]

Great setup video. Quick question, is there a way to setup the pixhawk "without" the use of the GPS module?

[@Painless360]

See the rest of the series, I cover GPS later on..

[@lefort5206]

Painless360 thank you for the reply it seems I had a typo. I meant to say "use the pixhawk "without" GPS not with GPS. I would like to essentially use the Pixhawk in a GPS denied area. Do you have a video on this subject?

[@FORDYI]

HI Painless360, I'm working on a tailsitter quadopter using a pixhawk and was wondering if there is a way to switch between the arducopter software for the vertical hovering and the ardupilot software of the tailsitter transition and fixed wing flight mode?

[@Painless360]

Not played with it here but lots to read up on in the Wiki - ardupilot.org/plane/docs/guide-tailsitter.html

[@tenbears1648]

You talked about a zener diode for regulating the voltage. Where can I get one ready to plug in to my Pixhawk?

[@Painless360]

I ordered one from eBay..

[@tenbears1648]

Thanks for your help

[@christianw3858]

Hello Painless, thanks for all of your awesome and gorgeous videos and excellent explainations. I bought myself the Pixhawk Lite from GoodLuckBuy. I think you don´t have any experiance with that, but anyway - this plattform can run the Pixhawk firmware without a problem. I would like to know what kind of settings i have to choose mandatory hardware tab in the compass menu. Minute 18:25 in this Video. You are clicking Pixhawk or PX4. What will this opetion excatly do? I did not find an answer somewhere. Maybe you can help? Do i have to use Pixhawk or PX4 as well? What are those other options? What do i have to choose? What will that option do?

[@Painless360]

+Christian Wunderlich Have a look in the video for the differences between PX4 and Pixhawk. I'd always check with the vendor on what they suggest. If it's sold as a Pixhawk then that FW should work.. Best of luck..

[@christianw3858]

+Painless360 ok understood - but what setting do you configure with this bullet point which you can select and i´m not able to find a video comparing px4 and pixhawk.

[@Painless360]

We cover it at the start of this video briefly. I'd check with the vendor but it is probably pixhawk you need. Best of luck.

[@henokhailu7615]

Your video turned me on :D So my question is, what do I need for mission planner. In terms of hardware? I am buying the pixhawk flight controller, plus a GPS module. Is that all I need? or is there extra hardware? For example, I want to use my computer and plan my quadcopter to fly on its own, while I am just watching FPV and can also track on my computer?

[@Painless360]

+Henok Hailu all covered in the series - keep watching! ;)

[@henokhailu7615]

+Painless360 Ok. So finished your series (5 episodes) and oh gosh, you are really good at making videos. So, on the 4th episode, you talked about setting up waypoints and everything. So cool, you can actually do that without any other hardware except for the GPS and a computer to setup up the waypoints at home. Am I right? But the problem is, you can't track your copter and where it is going with your hardware selection, because I think you need a wireless telemetry rx and tx where it is connected to the pixhawk, and one connected to your laptop, and therefore, I ca track down where my copter is going, and speed etc. and am right? Thanks you have helped a lot

[@henokhailu7615]

+Painless360 and one very last thing. Do I need a PPM encoder, if my receiver already transmits ppm signals? :D

[@Painless360]

+Henok Hailu look at MAVLINK radios ;)

[@Painless360]

+Henok Hailu nope

[@BadPennyDogBoy]

Mr P. Thanks a million for the whole series of videos you put out! They have been invaluable to me and probably thousands. of others. One question:- Is the GPS unit from my old ARM unit compatible with the new PixHawk? Or do I have to buy all new ancillaries.

[@Painless360]

It might do, I've not tried it here though as I tend to by the PixHawks with the GPS etc. all included as a package..

[@andreamontani9266]

hi sir, looking at pixhawk datasheet I did't find any info about the internal gps (not the external module) but I found info about internal compass. looking also at "pixhawk led and sound video AC3.2" video on youtube you can see that pixhawk links gps (Green led on) without external gps module installed . My question is if pixhawk has its own internal gps or it doesn't have this internal device? Thanks in advance Regards Andrea Montani

[@Painless360]

No internal GPS, we cover al, this later in the series.. Best of luck!

[@zhongandy172]

Hi, I have realized the motor beeps when the switch is flashing red light. However the problem is that after I calibrate the esc and motor spins perfectly when i turned it off and start again the motor doesn't spin for some reason. I'm really struggling to get this thing work..

[@francoisBonin-phils]

Again a perfect guide , shortly what is the advantage of the pixhawk over the apm...i have an APM , can i use my accessories , GPS+Compas and telemetry if i move to pixhawk?thank you.

[@Painless360]

APM vs. PixHawk covered at 3:03 in this video. Personally, the cost of the PixHawk with accessories is so low now I'd get a new setup. The GPS units shipped with the older APM are much less sensitive than modern units.. Happy flying!

[@francoisBonin-phils]

thanks for your answer, clear now...

[@BarefootBeekeeper]

Regarding the magnetometer calibration, does it matter that the GPS will be in a different position relative to the Pixhawk on the model, compared to the piece of card?

[@Painless360]

I’d always recommend redoing it in the model..

[@Rick-yf1lt]

hi Iv just bought a tarot T1000 it has the pixhawk and a radiolink R12DS receiver it has already been setup but I noticed there is ppm encoder between the 2 the receiver has an S-BUS port and in your video it seems I can connect it with only 1 cable instead of all this mess