Kit : Fujimi 421797 1/700 IJN Atago PE : Fujimi 114088 Premium Option Parts for 1/700 Atago
Пікірлер: 144
@EbroinSong5 жыл бұрын
Painted IJN Atago Link : kzbin.info/www/bejne/eaXIYXyXr7Sbi68
4 жыл бұрын
hello my friend, can you send me your instructions manual for premium option parts for 1/700 atago ? Please. And if you can, the premium option parts for 1/700 maya eventually ?
@tuanthanhlam17796 жыл бұрын
Aside from the superb skills, patience and meticulousness, I really enjoyed the way you went the distance and corrected the kit's inaccuracies. Much appreciation for sharing. Cant wait for your next video!
@EbroinSong6 жыл бұрын
Thank you for watching and the compliment =)
@fhlostonparaphrase3 жыл бұрын
@@EbroinSong Patience indeed. I would be furious if my kit had inaccuracies, broken parts and to top it off; official extra parts that doesn't fit the model. But then again, what does it help to be mad? Better to see it as a challenge and fix it. Of course, very impressive build, my hat's of to you :)
@nimofy63366 жыл бұрын
Its stunning to me how accurate and pationed you are. These Modells look so good, so detailed!
@EbroinSong6 жыл бұрын
Thank you, I tried hard to make it more accurate. =)
@JamesSavik4 жыл бұрын
Takao class heavy cruisers were a nasty handful and, the Japanese built handsome ships. This class built in the early thirties, were some of the most powerful heavy cruisers in the world. Half the class was sunk in a submarine ambush in the Palawan Pass just before the Battle of Leyte Gulf. Darter and Dace sank Atago and Maya and crippled Takao so badly she sat out the war in Singapore. Chokai was sunk at the Battle of Samar 3 days later. Beautiful build. I'm too old and nearsighted to build anymore, I just love the ships and their history.
@christophersnyder15324 жыл бұрын
This is a fine build of Vice Admiral Kurita Takeo's flagship. I own Italeri's re-packaged Aoshima's Atago, and plan to build each of her sister ships. I also love the tense music accompanying this build. Thank you, and take care.
@MrChetwyn2 жыл бұрын
Love these videos. You have the patience of a Saint!
@Vermilionleader6 жыл бұрын
Finally a vid with tips to build a ship! I've had a rare Oyodo CVL kit [well at least here in Mexico is rare since people tend to avoid hybrid or experimental ships] , but since the amount of people that actually build ships is very reduced I haven't found someone that could give me basic tips for assembling a ship kit! Very useful vid.
@EbroinSong6 жыл бұрын
Thank you for the compliment. =) I wish more people love to build ships.
@Advent22mix6 жыл бұрын
This is really fantastic work. The amount of effort you put in to get it exactly how you wanted is inspiring (scratch-built mast, modified superstructure, moving the torpedo tubes, etc). Very excited to see it all painted up!
@EbroinSong6 жыл бұрын
Thank you for watching and compliment =)
@JessWLStuart2 жыл бұрын
Wow! I admire your skill an patience!
@majestichotwings69746 жыл бұрын
just found this channel and I am really glad i did, its incredible how sharp your attention to detail is, many people would likely be too afraid to fix issues made in the plastic molding for fear of ruining the model altogether but you just roll right on like its nothing- keep up the good work my guy
@EbroinSong6 жыл бұрын
Thank you for the compliment =) I ruined lots of kits by doing something like this, and one day I wasn't ruining the kit anymore.
@hl17965 жыл бұрын
breath taking work....literally , when you bend and place those PE, it remind of all of the tension i got when i do my own PE
@alwoodsmodellingmayhem6 жыл бұрын
That is just wonderful work and thanks very much for showing us this and the techniques you used. I have two IJN ships in 1:700 for the Coral Sea group build, the heavy cruiser Kinugasa by Hasegawa and the aircraft carrier Zuikaku by Tamiya. Your videos are both inspirational and helpful. Well done.
@EbroinSong6 жыл бұрын
Thank you for watching and the compliment. =) I hope you also enjoy building Kinugasa and Zuikaku.
@Jaaoood6 жыл бұрын
What can i say... Im speechless by the amount of effort and detail you put into this build. Very Impressed! Cant wait for the paintjob.
@EbroinSong6 жыл бұрын
Thank you =) I'll upload painting video as soon as possible.
@Batka4 жыл бұрын
Thanks to this video, now I know how to apply the PE heat shields on the turrets. Thank you!
@DoItYourself-DIY4 жыл бұрын
The battleship is very beautiful
@modelwarshipsmws13056 жыл бұрын
Checklist: -first: Like -then: view video -last: write message 😂😂😂 Your models are the best!!! I am waiting for long time for another vid from you!!! Keep up the good work!
@modelwarshipsmws13056 жыл бұрын
Can not wait to see the video of painting...😆😉
@EbroinSong6 жыл бұрын
Thank you for watching. =) I'll upload the vid as soon as possible, I don't know when it would be though.
@modelwarshipsmws13056 жыл бұрын
Thanks for this niiiice answer
@Jeff-cv4qn5 жыл бұрын
@@modelwarshipsmws1305 Done!
@modelwarshipsmws13055 жыл бұрын
@@Jeff-cv4qn 😂😂😂
@Batka6 жыл бұрын
Amazing build, loved every sec of it. I have a lot of IJN Ships in 700 scale, and you showed me lot of tricks and tips, how to build them nicely. Especially the turrets. Thank you!
@alphatumeric6 жыл бұрын
The torpedo hatch improvisation is a genius one. Well done.
@ShipWreck685 жыл бұрын
i got a detached retina just from watching this.
@SmallSoldier5 жыл бұрын
Wow. Blown away again by your crazy skills. Love what your doing keep up the great work. Cheers.
@EbroinSong5 жыл бұрын
Thank you for watching! I guess you watch my whole videos about miniatures.
@SmallSoldier5 жыл бұрын
Yes slowly making it through your great content. You do such great work, I'm glad i found your channel.
@user-lx1fc6ii9o4 жыл бұрын
Your work looks so clean and neat!! Great job. I am also building Fujimi's Atago now, but I accidentally bought the waterline version, which is bit disapointing.
@flipflopsguy88686 жыл бұрын
LOL ! THANKS. I WAS A AVID MODEL BUILDER FROM THE SIXTIES ON AND MY BROTHER IN-LAW BUILT A LOT OF MODELS IN THE U.S. FOR TAMYA AND ALL THE LEADING BRANDS FOCUSED ON WAR PLANES OF THE JAPANESE AND ARMOR OF THE GERMANS FOR LOS ANGELES'S TOP MODEL SHOPS AND I GOT A LOT OF HIS COLLECTION AS A KID BUT UNFORTUNATELY I GREW UP TRYING TO ADD REALIZUM TO MY WARGAMING BY PLANTING FIRECRACKERS IN THEM FOR EXPLOSIONS AND SUBSEQUENT CRASH AND BURNS DESTROYING ALL THOSE EXCELLENT NOW DISCONTINUED MODELS. HOWEVER GOOD MY MODELING WAS CAN BE JUDGED BY THE FACT THAT I ALWAYS NEVER MADE THE LITTLE FIGURES THAT CAME ALONG IN THE KITS. SERIOUSLY I HAVE SO MANY UNFINISHED MODELS THAT I STARTED I WISH I COULD PASS THEM ON TOO SOMEONE WHO IS POOR OR CHILDREN WHO CAN'T AFFORD A REALLY GOOD MODEL AND REALLY HAVE THE PASSION TO BUILD
@EbroinSong6 жыл бұрын
I quit to build models several times but I always back for more..
@aleccap88634 жыл бұрын
the amount of pressure he is applying for the mast not to crumble is amazing, super glue must be incredible
@jovebalani81935 жыл бұрын
Amazing video Who are those people reading comments while watching the vid
@alep86454 жыл бұрын
wow so great its so hard doing a mast i respect all your hardwork on all scaale model building
@captainobvious92335 жыл бұрын
I love modeling, but I would not have the patience for all those photo-etched parts :(
@capperthepaul32854 жыл бұрын
I actually never used PE sets before cause it’s kinda expensive
@IsKor063 жыл бұрын
You have to tame the PE :D When you are comfortable with it, you can't go back. the PE parts have so much more detail..
@GmoneyX1125 жыл бұрын
Nice job well done
@crazyharkonnen5 жыл бұрын
Great job with your scratchbuilt mast!
@ARIES53426 жыл бұрын
Sir, Your insanity is outmatched by your skill, fantastic work. I wish I could write this in a smaller font so only you could read it. Adam
@LHWK_RHC2 жыл бұрын
あらあら, I only hope I can do as well as this when I come to build 愛宕 myself.
@comradenie71556 жыл бұрын
really great built!master class !and hope to the next painting video!
@deusexmachina62606 жыл бұрын
Exceptionally great!
@kennethconnors53165 жыл бұрын
excellent detail work
@usyachannel5 жыл бұрын
quite miracle work!! it's like a jewely!
@00ta5 жыл бұрын
Simply wonderful.
@user-nx7si3jw3n6 жыл бұрын
excellent! May you also do a video about how to deal with the photo-etch stairs? I would like to see how you make it from flat to three-dimensional
@EbroinSong6 жыл бұрын
Thank you =) OK, I'll try again. the stairways are too small and badly out of focus. Hope I do better next time.
@Profeta846 жыл бұрын
madness... unbelievable.. great master!
@yume37253 жыл бұрын
the binoculars omg
@panupongyormin57956 жыл бұрын
Thank for great video. Keep up the amazing work!
@tobiasdressel90024 жыл бұрын
Hi, what do you use to attach PE-parts to the model? Regular glue or something special?
@EbroinSong4 жыл бұрын
Hi, I used Loctite 401 and Alaska 610, I used them because I can get them easily, nothing special.
@peterv16026 жыл бұрын
Excellent. I saw you spent a lot of time masking the deck in your PoW video. May I suggest using detail parts such as deck reels, boxes, and vents. They can be painted grey and then installed on the deck.
@EbroinSong6 жыл бұрын
Thank you for watching. =) And thank you for the suggestion, I'll try it on other ship in future, I already start to masking the deck.
@peanut14126 жыл бұрын
Eborin Could you please please please make a 1/700 Academy Missouri that would mean so much to me. Keep up the amazing work! Oh and BTW you are one of the best modelers I've ever seen. I look up to you your that good I love the models that you make and the effort thanks so much for what you do.
@EbroinSong6 жыл бұрын
Thank you for the compliment =) I already have 1/700 Tamiya's Missouri, with full PE and wooden deck. I might build Academy's but I would build the kit I already have. (my wife will kill me otherwise..)
@johnathanjohnjohnston46675 жыл бұрын
I dont think I could handle pe parts since the last time i did anything metal model related i had to get a new vacuum
@leeedsonetwo3 жыл бұрын
astonishing amount of work. Where do you get these kits from?
@EbroinSong3 жыл бұрын
I bought it when I went on a trip to Japan. Thank you for the comment.
@MaquetteTv5 жыл бұрын
Amazing work without the paint I find it so beautiful, can I have the brand of your putty please ? Look like so easy to apply
@EbroinSong5 жыл бұрын
Thank you,=) You mean the Epoxy Putty? It is WESCO's 'Magic-Sculpt' www.artplace.com/magic-sculpt-epoxy-clay/
@fredrikbergstrom49906 жыл бұрын
Keep up the good work
@asheer91146 жыл бұрын
My reactions : Starting video: This should be interesting. Assembly start : o_O Almost done : O_O End : kzbin.info/www/bejne/mZqwd6ufpbSYnqc Seriously, level of detailing you could achieve at THIS scale is stunning...
@EbroinSong6 жыл бұрын
Thank you for the compliment =)
@ddjohnstonbetween2brests6394 жыл бұрын
What stuff did you use to sculp the canvas? Btw, you make great content, there is a lot to learn from your videos
@EbroinSong4 жыл бұрын
It is Magic Sculpt, Thank you for the comment!
@mayakaini94723 жыл бұрын
Great model, im building fossil nichimo Chokai kit in 1/500 and im not able to find a brass rod thinner than 1mm. Can you tell me were did you find yours to replace linoleum deck, thanks in advance.
@EbroinSong3 жыл бұрын
www.hobbyeasy.com/en/data/gnsladjhtvb8kltslqfs.html www.hobbyeasy.com/en/data/xj8tuwi4pbdqg7tksisj.html www.modelscenerysupplies.co.uk/brands/albion-alloys/Brass-rod-0.5mm-albion-alloys-BW05=BR2M You can find some here, and thank you for the comment!
@mayakaini94723 жыл бұрын
@@EbroinSong you are my hero now. Thank you very much!
@kkgc57605 жыл бұрын
hi, i got into building a 1/700 scale ship now, because of you and few others on youtube, but i have two questions i wish to ask you: 1, what super glue (with the nozzle) are you using? My super glue sets really fast and often leave residue that blocks the details... 2, I'm currently building the funnel part on a IJN ship, the PE looks like __|__|__|__|__|__|__|__|__|__ that suppose to go around the funnel, they are so fragile and the attachment areas are just pins even with super glue they don't attach easily. Any Suggestions? Thanks in advance!
@EbroinSong5 жыл бұрын
Hi, welcome to ship building club. 1. I use 2 super glues, Loctite 401 and Alaska 610. I use dental syringe needle as a nozzle for Alaska 610. If you can't get Alaska, you can use Axia 031 instead. I first apply Loctite 401 just little amount on the PE or on the ship, then place the PE where you want, because Loctite dries slower, you can adjust the position. then apply Alaska/Axia to glue the PE more firmly. 2. Gluing _/_/_ (jack stay) isn't easy. I glue the first and second branch on the Funnel first, then glue other branches one by one. It requires patience and fortitude. I also fail lot of time when I have to glue it. And it also falls off very easily. some people drill holes for each branches but it is not easy too.
@kkgc57605 жыл бұрын
@@EbroinSong Ill definitely look for those super glues! I finally got those jack stay on the funnel using your method! i.imgur.com/IZfehvh.jpg my lil ship is coming together! God i didn't appreciate just how small things are until i started building it, is probably because most footage and images i saw online is already zoomed in. It's only when i took a photo of my model which i can zoom in to see i saw so many imperfections which i didn't even notice, it made me realize how perfect your works are at like 19:26. Anyway thanks for the reply and help!
@EbroinSong5 жыл бұрын
@KKG C Nicely done! I saw the image and she looks better than my first ship. amazing!
@user-tt3qz4ee9x6 жыл бұрын
항상 잘 보고 있습니다
@EbroinSong6 жыл бұрын
봐주셔서 감사합니다 ^^
@flipflopsguy88686 жыл бұрын
I GIVE UP, I'M RETIRING FROM MODEL MAKING THIS IS JUST TOO HARD EVEN WITH TWEEZERS THIS LOOKS MADDENING !
@hl17964 жыл бұрын
i not remember see you mention it or not, but may i ask, what is the purpose of masing a thin strip, apply primer , and remove that tape at beginning use for ?. Also, the rib that you make using 0.2 diametter rod, i wonder can i do that with 0.15/0.18/0.2/0.25 brass wire ?
@EbroinSong4 жыл бұрын
Some of ships on that time had horizontal lines because of planking iron plate. Something like this: upload.wikimedia.org/wikipedia/commons/3/3c/KumanoMaru-1945.jpg I was making that pattern. If your brass wires are stiff, you can use anything you like. I have thinner rod but used 0.2 because it is stiffer.
@randsei52806 жыл бұрын
Wonderful! I always stunned by how people could handle those PE before losing their sanity. What the difference between molded linoleum brass and putting custom one?
@EbroinSong6 жыл бұрын
Thanks. it is hard to paint very thin line like the molded one, so I replace them with real brass so I don't have to paint them.
@randsei52806 жыл бұрын
I see. Looking forward for the painting video!
@OneofInfinity.2 жыл бұрын
Those are binoculars for ants.
@johnrennie46136 жыл бұрын
What is the putty you use for masking???? Does it leave any residue once you take it off? Your work is amazing. This is the kind of skill and accuracy I strive for.
@EbroinSong6 жыл бұрын
Thank you. =) You mean the blue putty for masking Camouflages? It is blu tack. sometimes it leaves residue but they can be removable by rolling blu tack ball over the residue.
@johnrennie46136 жыл бұрын
Ebroin Song thank you very much.
@crisandm10166 жыл бұрын
Well done. Loving how much better it looks after all of the PE was placed on her. Looking forward to seeing her all painted up. What camo scheme are you going for?
@EbroinSong6 жыл бұрын
Thank you. =) I am going for blue camouflage in World of Warships.
@crisandm10166 жыл бұрын
Oooh. That's a good looking camo. Can't wait for the video.
@Subbie-the-1st6 жыл бұрын
Great model and great job constructing it ! I love how you make these kits look eay better What's the first and second song used though...?,:D
@EbroinSong6 жыл бұрын
"Sing, Sink and Drink" from World of Warships. =)
@Subbie-the-1st6 жыл бұрын
@@EbroinSong Thanks! :D Sorry for asking so much but what is the first one in this video...?😅 And seriously your work is really amazing!
@EbroinSong6 жыл бұрын
Thank you for the compliment =), I am sorry that I didn't reply earlier. I don't come to KZbin very often.
@Chicolini196 жыл бұрын
Really great work! Gives me ideas for my own Atago build. Can I ask what brass barrels are you using? I got brass barrels from Masters, but they're longer than the plastic barrel parts...
@EbroinSong6 жыл бұрын
Thanks =) I used Rainbow's barrels, sorry I forgot to mention it. www.hobbyeasy.com/en/data/4touvhsj6pqkupg6q4xf.html
@alep86454 жыл бұрын
Can you build the USS Missouri or other her class
@EbroinSong4 жыл бұрын
Yes, I have Iowa and Missouri on my stash. I don't know when I will build them though.
@ddjohnstonbetween2brests6396 жыл бұрын
Dude i learn so much from ur vids, are u going to paint it in the wows colour scheme? I also have a challenge for u , built the roma with the kobayashi camo (excluding the beercan on the Bridge)
@EbroinSong6 жыл бұрын
Thank you for watching, and yes I am going for the blue scheme. I would build the ships with Kobayashi camo, but after building the kits that I already have. Buying new kit is forbidden by my wife. =/
@deusexmachina62604 жыл бұрын
Hi! What glue do you use to bond plastic and iron rods on 7:35 of the video?
@EbroinSong4 жыл бұрын
Hi, it is loctite 401.
@user-ld8cm5yi6j6 жыл бұрын
amazing work!! and can I ask you how to make the CA glue with the needle? It seems very good to use.
@EbroinSong6 жыл бұрын
Thank you =) I stuck a syringe needle at the nozzle of the CA glue and then taped around multiple times where the nozzle and the needle met. the CA glue must be very watery, if it is not, the glue won't come out from the needle.
@user-ld8cm5yi6j6 жыл бұрын
@@EbroinSong ok.thank you for sharing!! and I hope you can make a video about how to make the pe part. I am a raw hand , pe part always bother me....
@EbroinSong6 жыл бұрын
I am glad I helped you. And I tried it before but my camera couldn't stay focus on the small and thin parts like PE, I hope the camera do better next time.. or I could buy new lenses in future.
@liwenh.24686 жыл бұрын
thank you for sharing this video, always can learn some techniques from you. questions, regarding the magic sculpt, do you use two parts one and mixed it? thank you.
@EbroinSong6 жыл бұрын
Thank you for watching =) I mix the Resin and the Hardener 1:1 ratio then apply on the ship.
@aarontwintowers6 жыл бұрын
This is a great video, thumbs up from me. I have a question, is the photo etch fret quite stiff? As it seems to hold up well to handling.
@EbroinSong6 жыл бұрын
Thanks =). This one is quite stiff. not as fragile as Flyhawk's photo etched.
@xXXx-du4qe6 жыл бұрын
Hi Ebroin Song, why do you make the lines at the hull?
@EbroinSong6 жыл бұрын
Thank you =) most of WW2 ships had lines like that. www.geocities.jp/sawatoshi201/TYOKAI.jpg you can see the lines on the hull.
@bamukero49783 жыл бұрын
What did you use for the sculpted canvas? Clay?
@EbroinSong3 жыл бұрын
Wesco's Magic Sculpt.
@SK-fs4jg6 жыл бұрын
what do you use to make the canvas at the base of the guns?
@EbroinSong6 жыл бұрын
I used 'Magic Sculpt' for the canvas.
@TheZealotur6 жыл бұрын
Awesome work! May I ask which glue you are using for the PE parts? Thanks!
@EbroinSong6 жыл бұрын
I used Loctite 401 and Alaska 610. Thank you
@steves84825 жыл бұрын
Binoculars - ha ha ha ha ha ha ha - great video, great skills - thanks again for sharing this - why doesn't your PE stick to your tweezers - mine does again and again grrrrrrrrrr
@EbroinSong5 жыл бұрын
Thank you, I use knife and syringe needles to apply the super glue on the model, then place PE very carefully on the model.
@andrediaconu2878 Жыл бұрын
The Atago is a Takao-class heavy cruiser, am I right?
@MVball695 ай бұрын
Yes
@peanut14126 жыл бұрын
I was wondering do you know how big the 1/700 Alliance Model Works 50 yard pier is? Thanks.
@EbroinSong6 жыл бұрын
sorry I have no idea how much big it is.
@Sinistercabbage5 жыл бұрын
How many manhours do you think it took you to complete this model?
@EbroinSong5 жыл бұрын
I think it took about 100-130 hours.
@gladstream82626 жыл бұрын
Como me gustaría tener tus habilidades para el modelismo
@EbroinSong6 жыл бұрын
He hecho modelos de plástico por mucho tiempo. Y algún día tengo las habilidades para construir todo lo que quiero. Tendrás mejores habilidades a tiempo. -I got a help from google translator
@user-fr9jx4vs1j6 жыл бұрын
大日本帝国海軍は世界一ぃぃぃぃイイぃぃぃぃ!!
@CannedBenzene5 жыл бұрын
ぱんぱかぱーん\(≧▽≦)/
@kolicaptain1525 жыл бұрын
those are trustworthy hands!
@EbroinSong5 жыл бұрын
Yes, They are!
@naturalobserver61306 жыл бұрын
How long did it take you to build this ship?
@EbroinSong6 жыл бұрын
About a month and half, maybe about 4 hours per a day.