I had to see if an inexpensive trash pump would actually run my new piece of prospecting equipment.It does the job ..barley but looks like it might be ok for the job
Пікірлер: 76
@andrewmunchkin72124 ай бұрын
I came up with the hf 1" pump idea this afternoon. Then typed it in the search, you came up😅
@andyamysarizonaadventures54504 ай бұрын
😁
@kimog84069 ай бұрын
I plan to buy that pump also
@genofromrenoprospector69402 жыл бұрын
Thanks for this video. I messed up and bought a 1" 2 stroke. It works ,but loud as hell. I got it because it only weighs 18lbs. Should have bought the HF 1", but the weight is 2 times heavier . It's an hour hike into my claim.
@andyamysarizonaadventures54502 жыл бұрын
An hour hike in? Oh man the golds gonna be good😀
@lesterleporesr52283 жыл бұрын
That trash pump will be More than Adequate, If you have enough water! Mine still works!😂😂😂
@andyamysarizonaadventures54503 жыл бұрын
If there's any water🤦🤪
@chrisneville68103 жыл бұрын
Gonna have to get one of those 👍🍻 Thanks for sharing this ⛏🤙
@galaxgames85423 жыл бұрын
Andy, get a piece of 1/4 inch hardware cloth and place it in the grizzly on top of the bars. Automatic classifier lets you run only classified material over the sluice. all large rocks fall of grizzly. I run my dredge hose directly into my grizzly for that result.
@the_hybred6482 жыл бұрын
Thank you for posting this video, very helpful
@CandSMINING3 жыл бұрын
Don't you just love it when the pump motor doesn't want to play nice.🤔😡Flow looks good and clean rocks. I would try to pull the damper flap off and see what happens. 👍A little more pump, yes.😎👍👍⛏⛏
@andyamysarizonaadventures54503 жыл бұрын
A little more..😂
@jamesmudd22273 жыл бұрын
That Keene is a really nice highbanker Andy! Good luck on your mining trip tomorrow! Looking forward to watching that.
@JohnnySwedishScrapper3 жыл бұрын
great video ;) here in sweden we use 5 degree angel that collect more gold, but great video ;)
@renepaz42083 жыл бұрын
Looks really good and I’m glad you found a less expensive option to the Honda.
@davidl.howser97073 жыл бұрын
I found Predator Engine 79cc performance upgrade kits in the go cart racing world. These Engine mods may keep the light weight to pack in and the power needed to pump more water.
@southforkmining3 жыл бұрын
You can always try making the drop of the Sluice box steeper for better water flow.
@brianthayer97843 жыл бұрын
They make a inch and half pump same size as your one inch pump about 170 on ebay thats what I use and have no problems it runs my 2 inch dredge also
@andyamysarizonaadventures54503 жыл бұрын
Thanks Brian that's awsome 🙂
@brianthayer97843 жыл бұрын
@@andyamysarizonaadventures5450 no problem bud
@adhawk56323 жыл бұрын
I agree, $200 AUD 1 1/2 inch both sides. It works well on a 10 inch dream mat highbanker. Use a layflat hose for portability, but round suction pipe is better if you can carry a small length 🇦🇺👍👌
@andyamysarizonaadventures54503 жыл бұрын
@@adhawk5632 thanks😁
@navagatingthroughthebeasts29083 жыл бұрын
Yes ive had one of those hoppers they rock , need to get another. Im running a 2' dredge with 1' harbor frieght pump. Ive only used it a few times & your absolutely right that blue hose i lost so much pressure / flow..... Yes I have same rubber flap on dredge head on sluice box , does same.... I might just buy a 2'
@GSProspecting3 жыл бұрын
nice set up fam. keep up the great work. GOLD SQUAD OUT!!!
@conorgorman866411 ай бұрын
Put strip of strong Velcro type material across the width of the dredge flap. You also can use a velcro strap. It’s like a zip tie but about 3/4” wide strap made of velcro. Roll up the flap towards the top of the dredge flair opening. Then secure with two straps. Just an idea. Very very cool stuff you have there, sir..
@andyamysarizonaadventures545011 ай бұрын
Thank you very much!
@DaleDuffy3 жыл бұрын
Good video Andy, good luck this weekend....!
@andyamysarizonaadventures54503 жыл бұрын
Hey Dale, good to see you .thanks🙂
@andyamysarizonaadventures54503 жыл бұрын
Hey Dale will you please email me at andyz1974@gmail.com thank you
@jimmyz0033 жыл бұрын
Looks like an awesome setup! Love watching your videos. Can't wait to get out there to Arizona and start slamming on them GPAA claims. And just an afterthought. If you used a shorter bucket at the bottom of the high banker so that you didn't have to increase the angle, so the bucket would fit, material would move even with the slower pump.
@andyamysarizonaadventures54503 жыл бұрын
Ahh thanks man,and good luck out there! Just need a little more water
@davidl.howser97073 жыл бұрын
Andy... Hello from David L. Howser of Freeland, Maryland. I have enjoyed, very much, your Arizona Adventure videos. I wish to give back. Having a background in Aquaculture System Design, I humbly suggest that there are too many 90 PVC pipe bends in the existing compact spray bar water supply design, which when combined are significantly reducing the overall water flow. Please consider flipping over the spray bar 180 degrees, then installing a spa "Y" pipe fitting before the spray bars with two flex pvc spa pipes leading to the two spray bars to create gentle pipe bends between the water supply "Y" fitting and the two spray bars. Maybe make the spray bar with "Y" pipe detachable. This "spa pipe" provides for a much lower water flow restriction design that may significantly reduce restriction points, and provide a better chance of obtaining the needed higher flow rate with the smaller more portable Harbor Freight Tool Water Pump. I hope this higher water flow rate helps creat more gold capturing success. Please keep making those videos. Hope to see you soon, in person, after my move to Dewey-Humboldt, Arizona 86327. Please visit this Link: flexpvc.com/cart/agora.cgi?p_id=672-8050-2&name=672-8050-2%20Manifold%20Wye%202.5%E2%80%9D%20x%201.5%E2%80%9D%20(No%20Cancellation%20or%20Refund%20&xm=on&ppinc=detail&gclid=CjwKCAiAuoqABhAsEiwAdSkVVFeNhs1Yn9ZUwSJeW3oQ2K-tAMh35OvmmuJVOR7BXE9sg2syIG-5EhoCIeEQAvD_BwE
@andyamysarizonaadventures54503 жыл бұрын
Thank you! Incredible 😊
@prestongriffin416 Жыл бұрын
raise the back off your box and keep level pin that flap up in the air i you will see a difference i think or put a shorter bucket in front to catch taillings just a thought PRESTON
@andyamysarizonaadventures5450 Жыл бұрын
Thank you!
@ginocasagrande5743 жыл бұрын
Have you thought about using a spa hose instead of the lay flat? You don't have to worry about kinking. Just a thought. Great progress have a good one
@rustyp214 ай бұрын
Thanks for the great video! I have nearly that exact setup - same highbanker, and a small 1” pump. I purchased a used Honda 3” pump. Did I go to large, and, can/should I reduce it down to 2” or 2.5”? And if so, do I have to do intake AND output, or one or the other? I haven’t purchased any hoses yet, and want to get the correct items once. I’m new to this, they are all recent purchases. Thank you in advance - and I am subscribing!
@andyamysarizonaadventures54504 ай бұрын
Thank you! I would keep the over sized pump and make it work,especially being a honda.That 3" may only require just above idle to feed your plant sipping gas and working easy lasting you years.I don't know how much portability is an issue.
@lesterleporesr52283 жыл бұрын
Them Cats will steal that gold!!!!😝
@VendettaProspecting3 жыл бұрын
SWEET DEAL!
@andyamysarizonaadventures54503 жыл бұрын
I saw your latest video come in,going to watch after dinner,cool thumbnail pic.Wish I could figure out how to colage em like that.well done!
@VendettaProspecting3 жыл бұрын
@@andyamysarizonaadventures5450 3D Paint, go to edit and add 3d text. It will make a MP4 file and you will need to use the snipping tool to take a screenshot and save it as a picture;)
@targetrock60723 жыл бұрын
Andy when you use the reducer it will affect the flow rate and using 2" hose will also affect it it with 1" pump. What it you made the lay flat pipe smaller length and turn it into 2 pieces. Your flow would increase a lil and shmaebe enough to work for you. Also you were are flat ground with 0 lift that will effect the the overall gpms. Food for thought when using the highbanker in a real field senorio. Best of luck getting shiney lines in the riffels.
@andyamysarizonaadventures54503 жыл бұрын
Great points our friend 🙂 thanks!
@lesterleporesr52283 жыл бұрын
I had to govern my trash pump down, And put a valve on it to reduce water pressure to my "piglet"! Freddy Dodge is in Arizona,& I'm in North Carolina! Freddy is on discovery channel; might be worth watching! I don't use lay flat hose; it's cheaper, but more delicate,& always a pia!
@dougsimpson54482 жыл бұрын
Cut flap ,shorten distance from pump to water supply and discharge hoses try . Less distance = less weight of water on suction and discharge sides.. Mabe try smaller hose ..inch and a half.. Just ideas.. Love you site !!
@andyamysarizonaadventures54502 жыл бұрын
Thanks Doug
@account22923 ай бұрын
Exactly what I was thinking.
@SYEDASASIANKITCHEN3 жыл бұрын
nice video
@lesterleporesr52283 жыл бұрын
You should be able to shovel right into that, without classifying. My pump is a 2" predator- from harbor freight!
@arte98553 жыл бұрын
Andy, not sure if you can upsize the inlet hose to 2" on the smaller pump? Might be worth a try to test again with a 2" supply line going to and from the HF pump.
@Leouniteus3693 жыл бұрын
You need to make the intake the same size as the discharge or larger with the non-collapsible hose or you will not have any benefit!
@IBRAKEFORBEDROCK3 жыл бұрын
You know , with Dry Washing you don`t need any of that stuff .... :)
@andyamysarizonaadventures54503 жыл бұрын
It is alot of crap😂
@coreyk8231 Жыл бұрын
I have the same setup. What would happen if you used 2 1 inch pumps
@andyamysarizonaadventures5450 Жыл бұрын
Nice,I would think that would give the pressure needed,large dredges use 2 pumps,great idea Corey!
@reneuriartejr57643 жыл бұрын
I have a buddy who's a roadrunner who is selling a small Honda pump.... it's has the keene high pressure pump... it's damn near brand new. He's out this weekend on the new claim towards cleator. Which i like it a great new claim. Maybe you might run into him and his wife
@andyamysarizonaadventures54503 жыл бұрын
Please ask him how much for the pump😁 that cool,yeah I heard they got new claims but I haven't gotten there news letter to know where they are!
@reneuriartejr57643 жыл бұрын
Good morning and will do .. I'll call him in a bit
@lesterleporesr52283 жыл бұрын
I'll be panning & Sluicing with Benzo Bonanza in the morning! I'll try to do a video!
@Thebald13 жыл бұрын
The small 1-in pump from Harbor Freight that's not a trash pump.. I have the same one.. the 2-in one is for sure..
@davidl.howser97073 жыл бұрын
KZbin Channel Robot Cantina does a Predator 212cc engine modification series.
@andyamysarizonaadventures54503 жыл бұрын
Woow
@aumetalmental84033 жыл бұрын
Smaller hose size running to highbanker would build pressure on small pump 😎✌
@andyamysarizonaadventures54503 жыл бұрын
Ohh😁 thanks
@arte98553 жыл бұрын
Needs a larger supply line to the pump. 2 inch in 2 inch out, depends on the gph ratings...you can only push so much volume thru a 1 inch hose. Want more volume? Need larger diameter hose...larger diameter may require a larger pump. Again depends on the gph water flow.
@pnwprospecting2 жыл бұрын
2” is better until you can get a 1.5 from Keene!
@andyamysarizonaadventures54502 жыл бұрын
Hey thanks for the visit my friend, I went over and subbed,can't wait to check it out
@FlourgoldWizards3 жыл бұрын
Whats the gph on the 1 inch ?
@andyamysarizonaadventures54503 жыл бұрын
Like 35 ,but this time of evening it's how many BPH 🤪🍻🥩
@paulsoyka70033 жыл бұрын
Is Amy ever happened
@davidb7699 Жыл бұрын
Not enough flow,,,but a cool Video
@andyamysarizonaadventures5450 Жыл бұрын
Thanks David
@MrDickfish3 жыл бұрын
Dont cut off the flap just put some sticks under it to raise it up. You may want it there in the future.