1" Solid Axle Install on Manco Go Kart

We got the Go Powersports solid axle and the installation went pretty smooth as far as the cutting and welding. Stick around to see my fat butt riding on this go kart. Thanks for watching!
💥Don’t forget the 10% discount at capritools.com by using code “Chris2022”💥
Link for the kit: www.gopowersports.com/6-live-...
FTC DISCLAIMER: Coyote Chris is a participant in the Amazon Services LLC Associates Program, the eBay Partner Network, and other Affiliate Programs, an affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to the company's website.
"Due to factors beyond the control of Coyote Chris, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Coyote Chris assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of our videos. Due to factors beyond the control of Coyote Chris, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video or any of our videos is the sole responsibility of the user and not Coyote Chris."

[@dislikebutton5291]

I’ve learned a lot out of just this video, thanks

[@CoyoteChris]

Thanks for the compliment, that’s the whole reason for me posting videos. 🔥🤘🏼

[@jjmonty8090]

I need that seat!

[@CoyoteChris]

I need to get the cover fixed 😂

[@freshbutplain1144]

Good job man!

[@CoyoteChris]

Thanks 👍🏼

[@hibyeyummy9915]

cool vid we're going to install an axle ours and we got the same axle kit

[@CoyoteChris]

Awesome 🤘🏼🔥 it’s a nice kit!

[@hibyeyummy9915]

yeah it is any problems with the go-kart so far

[@CoyoteChris]

No issues with Kit, it will push front end since it’s a solid axle and I would suggest disk brakes instead of drum. Drum is to weak to stop the kart.

[@hibyeyummy9915]

The package just arrived in the mail thanks for the advice and I will get back to you once it's done

[@CoyoteChris]

🔥🤘🏼

[@ahoilthing8398]

Hello where did u order the axle shift kit from?

[@CoyoteChris]

www.gopowersports.com/go-kart/axles/

[@joeysreptilesandamphibians7260]

Have a question, do you still have original drive rim, I'm in need of one , and can't find one

[@CoyoteChris]

I gave it to a friend, sorry.

[@austinrichardson4580]

What was the length of the axle cus go powersports as multiple and I want the same as youfs

[@CoyoteChris]

I went with the 40” but I think you could go with the 38”. 🤘🏼

[@danielschafer4450]

You have the brake band setup backwards. The bottom of the band should be attached to the frame and the top of the band should be attached to the brake rod. Check any one of the videos on KZbin for this.

[@danielschafer4450]

Oooops... I watched to the end of the video to see that you figured it out. It's backwards and the best way to go with your new live axle is to put on a disc brake setup. Enjoy!

[@CoyoteChris]

Yes I did the mechanical brake in the next video Go Kart Mechanical Brake Install kzbin.info/www/bejne/hXmcdKKifKt1p5Y

[@brennenhunter]

I have the same 5hp engine but I can’t find a replacement carb anywhere online. Do you know the brand of the engine?

[@CoyoteChris]

I ordered one a long time ago from eBay but I can’t remember what I looked up the get it. Sorry!

[@CoyoteChris]

Carburetor Fit Tecumseh 5Hp 5.5Hp 6Hp 6.5Hp OHH50 OHH55 OHH60 OHH65 OH195

[@delanosheffield3946]

Where did you get the live axle kit

[@CoyoteChris]

www.gopowersports.com

[@benrollins7348]

Would you have the part number for the kit? I have a red Manco 405 go kart like yours. And is your brake drum in the video a 4" or the 4.5"

[@CoyoteChris]

Here is the link for the kit I got, www.gopowersports.com/6-live-axle-kit/. The price has went up since I got it and the drum was a 4”. Hope that helps!

[@benrollins7348]

@@CoyoteChris that link for the kit has different length axle. 36" , 38" , 40" ,42" and so on. Which length axle did you buy? If you remember

[@CoyoteChris]

I went with the 40” but you could probably get away with a 38”.

[@benrollins7348]

@@CoyoteChris thanks for the info. I appreciate it

[@CoyoteChris]

Your welcome 🤘🏼

[@russelltech]

What length axle did you go with?

[@CoyoteChris]

I went with the 40” axle. 🤘🏼🔥

[@russelltech]

@@CoyoteChris awesome. And thanks for getting back to me. I have a single drive kart that I’ve been looking to do this with. Hard part is I can darn near buy a used kart already setup for the cost of all the parts I would want.

[@CoyoteChris]

@tensi0nrytec your welcome, you got to weigh those options 😂. Good luck 🤘🏼🔥

[@ianmalone1520]

14.5 horsepower would be ok for a go kart right?

[@ianmalone1520]

Bc right now we have a 420cc on my go kart frame and we’re in the process of building it but it would take off fast enough correct?

[@CoyoteChris]

Sounds like your building a race go kart 🤘🏼🔥

[@Rhind0n]

I think you may need a little more than 14.5 hp if you even want to go over 20 mph 😆😆😆

[@ianmalone1520]

@@Rhind0n not if you have a torque converter a live axel and a 4 speed gear box you don’t

[@izzyrodriguez1996]

Hey I know it's been a year since you uploaded this but I was wondering if you have the old drive wheel still, would you be willing to sell it or donate it to a fellow kart builder? Lol in the process of rebuilding one for my 8yo but it's kind of a tweaker special at the moment.

[@CoyoteChris]

Yeah sorry but most of those parts have disappeared or sold off. Wish I could help. 👍🏼

[@izzyrodriguez1996]

@@CoyoteChris No worries! Definitely wasn't expecting you to reply at 1 am 🤣😅 I'm having issues finding the right setup for the brakes. We have the same kart other than mine is the 2 seater.