10,000 Watt 15" Subwoofer Build Part 10 FINAL

Huge thanks to BlackBrick Audio for sponsoring this build! Use Discount Code PoundWithParker
blackbrickaudi...
Link to these INCREDIBLE Slam Panda Bassknobs!
showtimeelectr...
Also big thanks for D4S for supplying the JP84 for this build!
Grab it while it is only $199!!
lddy.no/1cf2y
Support the basshead family by checking out my affiliates!
D4S: lddy.no/108an
G2: g2daudio.com/?...
CT Sounds: www.ctsounds.c...
Check Out My Socials!
IG: www.instagram....
FB: / parker-the-basshead-of...

[@Bassotronics]

It’s why I love tubes and not common square enclosures. Tubes are relatively light, modular and unbreakable! I’m a biased tube guy. If making a common square box, you have to brace the hell out of it which is necessary, make a thick baffle etc and can weigh dozens of pounds because of it.

[@R_00N]

That's insane peaking at 20hz must be moving a ton of air.

[@ParkerTheBasshead]

It really is!

[@Andrew_kiwi_AF]

@@ParkerTheBasshead how does it peak at 20hz? Isn’t that well below box tune? Also the cabin is so small that it can’t simply peak that low. To peak at 20hz your box tune would need to be 15hz or something silly. I think there’s something funky going on with your subsonic and crossover points Over lapping which I’ve seen happen many of times.

[@Andrew_kiwi_AF]

@@ParkerTheBasshead ok so a damaged box will cause the low peak thing. I’ve had cars before the more volume you give it the peak Comes down and was always due to a damaged port or box

[@APinTheAK]

@@Andrew_kiwi_AF tuned @ 25hz

[@Andrew_kiwi_AF]

@@APinTheAK I like that lots :):) but still. How is it possible to peak 5hz lower then box tune? If it’s leaking at 20hz that means it will play down into the teens like a boss :):)

[@BudgetBassHead]

You've done an amazing job with the channel, Parker. Love the energy!

[@ParkerTheBasshead]

Thank you man! It was a lot of fun

[@nohairdontcare8803]

@@ParkerTheBasshead where do you get these mainstream songs mixed with the extra bass? Is it on Apple Music?

[@ParkerTheBasshead]

@@nohairdontcare8803 KZbin!

[@michaellopez2617]

@parkerthebasshead it was a pleasure meeting you at the Sundown Audio 2022. I’m the guy with the single 10” on the Kia Rio.

[@hulkellington617]

Thanks!

[@ParkerTheBasshead]

I really appreciate you man!!!

[@smallb-kay6852]

After ages the video finally came out☺️

[@PhiMobileSounds]

Learning through doing. Sometimes you just have to experience issues and resolve them to internalize why certain techniques are used in the application. Good stuff! There is nothing wrong with going to version 2.

[@ParkerTheBasshead]

Yessir!!

[@thetruthtings]

@@ParkerTheBasshead play this song by pistol Atkins - hold you down and thank me later

[@TheKenzaya]

@@ParkerTheBasshead Respect! I remember watching your first videos and loving the energy you have for our lifestyle. You never once tried to hide your mistakes and always listened to peoples input….good or bad. Congrats on your progress and on doing a badass lows eating build in a short time. Keep on doing what you do. Bass on sir…..bass on! 🔈🔈

[@thetruthtings]

@@ParkerTheBasshead what is the loudest single 15 that you have heard on music only if you tell me I'll buy it with no problem

[@Antonnn1111]

@@thetruthtingszv6 15

[@loopinator1]

Love the build. And it came together super quick. One tip I wanted to give is I use 5/16 t-nuts and Allen head bolts for holding my heavy subs in place. The t-nuts have a much larger footprint inside the box than any screw or bolt could as well as a much better clamping force due to it using actual metal on metal threads and you can uninstall and reinstall the subs without ever worrying about wearing out the holes. I have even used a small bit of medium strength thread locker on them to keep the bolts from coming loose with vibration. Keep up the great work. I can't wait to see the completed project.

[@BobBasshead]

Good tip on the t-nuts, you beat me too it!

[@MotoAtheist]

I doubt he cares about longevity of this setup, he'll be swapping everything out within a month I bet.

[@Antonnn1111]

T nuts strip out regularly and suck for heavy subwoofer usage, in my experience. Deck screws are just fine, if the hole strips out, put some thin copper wire in the hole or rubber material and then screw it back in

[@DarrenT0dd]

Dude! Thank you so much for taking us along for this ride. The truck and system look phenomenal! This was so fun to watch. 🤟🤟

[@ParkerTheBasshead]

No thank you for watching!! It was a lot of fun to do

[@joshhoover5132]

Love ur content wish I had some subs like that I bought 2skar ix 10 blew them replaced them with the same now I'm afraid to turn it up cnt wait till ur suv build dn its a monster

[@MichaelBloesel]

WoW Parker, Back over 40 years ago I punched out 138 dBs (NCAA Certified) in a 1980 Mighty max P/U with 2 alternators, 2 Batteries, 4 Alpha sonic amps connected to 4 Pyle pro 12 inch and 2 JBL 15 inch subs. I took #1 for SPL going against vans from Orion, Kicker and Cerwin Vega in a daily work truck with a shell. Keep doing what you love to do. !

[@EnglehartProductions]

Just want to say it was awesome meeting you at the Sundown Show in Hickory (I was the kid wearing the green hat talking to you about college and stuff). Awesome series, and I can’t wait to see what other videos you have planned!

[@ParkerTheBasshead]

Yeah man likewise!!! I appreciate you and hopefully I’ll see you at some other shows in the future

[@DIYAudioGuy]

Hope the box holds together for the show!

[@technicianumber1288]

You live , you learn, you never do that shit again lol. No video justice but it sounds frickin awesome. Have fun at the show and thanx for your time my dude

[@ParkerTheBasshead]

Yessir!!!

[@DonaldBurnham-wy5tv]

Ya it does sound like it be something to get a demo from ❤dropping them hertz tho.. my buddy has 8 12in xfls onna 8k doin 155-160dbs

[@DonaldBurnham-wy5tv]

It loved them low notes haha no joke 10hz made the passenger seat follow with the bass ass it hit😂

[@MRR-qv3bw]

I'm a sucker for the lows! Moving that AIR!!!

[@MacRilla]

Whew, Them bad boys love the lows. Not an spl sub but a knock the pictures off the wall when you drive by. The low lows are the way to go 💯

[@jasoncoyman6069]

This is why you should ALWAYS use quality wood glue when building a box. The glue will hold better than the screws. I love your videos. Great build. Keep them coming!!!

[@josephsaucedo8691]

Yup when you built it the first time I didn't see any wood clamps and the glue was a little shy the lack of screws doesn't help either. If you glue it right it spose to be stronger than the wood it self and wood glue should come out of the sides when clamped. Have fun and good luck at the show bass on 🎶👍👌✌️💯🎶 boooom

[@workingclassperson2124]

Dj Droppn-Droppin beats,low & slow is a great album. Deadly Bass is one of my all time favorites. When tuned low of course

[@drop-nyc]

I have always been a big bass head , ever since I was younger. I'm using a 4500 watt amp to push a single 15 inch subwoofer. Wish I had more money to buy a better 15 inch sub. The one I got now a Rockville Destroyer, and deaf bounce Apocalypse amp. Definitely want to upgrade.

[@TG-qy3us]

Watched the whole series.ton of work to get ready.respect bud

[@FriesenHQ]

my man bumpin some upchurch hell yeah

[@fordharley37]

I like to use a combo of screws and nails. As a framer you learn that screws have pull out strength but no sheer strength. Especially the black sheetrock screws will sheer. You probably can check those screws and see some are sheered. Try a stronger deck screw. And use wood glue not liquid nails. Glue cures faster

[@fordharley37]

Good job on the build also. I am working on a build myself.

[@KaySwiss21]

One thing I've kinda figured out on my own people, which you won't see in many KZbin videos. If you want good loud, clean, bass; never turn up the "bass boost" or "bass" knob on the amplifier. Only use the gain. Some amps may not even have this knob but if it does don't use it. It just distorts your bass and causes the amp to clip easier.

[@jimmyjam5588]

That's a sweet build Parker wish I could of heard it in person but hopefully the Sundown show went great for ya!!!

[@ParkerTheBasshead]

It was a ton of fun!!

[@jimmyjam5588]

@@ParkerTheBasshead good 👍 I can't to see what you do with the sequoia next!!

[@rickgore3350]

Welcome to the world of 15s they love the lows man

[@APinTheAK]

Bangerrr bruh! You needa upgrade your mounting game to Threaded Inserts and Allen key Machine Screws. I could never go back. Being able to mount and unmount, over and over, and not deal with destroyed baffles, weakened mounting points, ect. Is so nice. Plus the Black Allen Head Bolts look super dope with the raised head. Keep slayin’ bruh.

[@shuff9551]

Finally the moment I can see those subs move :D

[@bd6928]

Parker, you're a beast bro! Singlehandedly!

[@KvngFlippa]

The Moment We Have All Been Waiting For😁😁😁‼️

[@Blazin1216]

Man, that build turned out great! Glad you got the box fixed before the show. Keep up the amazing work.

[@markroberts715]

Nothing.like when the systems.all done and it puts a massive smile on the face! Nice setup bro

[@theone148]

great job bro.. You smiling were smiling so much, you started making me smile, then I am like," why am I smiling ?" LOL.. Its because I remember the feeling of messing with my stereo. Love it !!! keep doing your thing bro !!!

[@oSTYNCLSYo]

Nice setup, i believe i did a 150 with 1200 watts in my blazer. Playing low like that is fun.

[@douglasmann1278]

Nice demo at the show enjoyed it

[@geremyphillips4234]

I just grabbed 2 of those same 15s with a jp 63 can't wait 2 hear it!

[@1ohmwrecker]

I use the threaded insert screws. They're expensive, but won't go nowhere! They becomes one w the baffle👍

[@pvtpelnar11]

Austin is a great guy too! He cares about his customers

[@AdamJDe]

Being a space lover I'd myself love to see some sort of badasses outer space design on a box 😮

[@aladinmadapaka355]

Finally! Man! Even that big box can't handle the bass/power! That's so freakin awesome! Can we see the video when you put that in sundown show! Parker the basshead my idol! Watching and supporting every upload of your video here from philippines! 🙌🔊

[@BobBasshead]

I realize it was a one man rush job putting that system together and you did great! One thing I'd like to point out on the box build. Back in the 80's (yeah I'm that old) when I built a box I'd rip 2x4's with-wise (1 5/8" x 1 5/8") glue and screw them on every full length internal joint. Back then we didn't take into account the volume that the bracing and the displacement of the woofer itself took up. As Nick Tonniges suggested use 5/16 T-Nuts and Allen head bolts to secure those subs solidly to the box, those self-drilling screws you used aren't going to last and have no where the amount of clamping force of the bolts and T-Nuts. Good luck on the sound competition!

[@fallxn1531]

Loved the series Parker! great build, insane blow power for 2 15s at 20 hz

[@superior3384]

Cool you were able to fix the box. I love the lows.

[@1976beerfan]

Reminds me of my first build..back in 94 I had a kicker comp 15 in a Toyota tercel on a Malibu 100..went to my first competition on a same day build.i did a 129 at 20hz..was very impressed for a 3cu ft sealed box...

[@mullinperformanceaudio5902]

Man I wish I could have heard this thing yesterday but at least I got to meet you for .02 seconds. Lol

[@robertkeenbuildingmylifesh3429]

Blessings , salute to everyone grind and Motivations.... Always majorly saving my life motivational.....

[@soundbeast39]

That sucks the Box broke loose brace it up get it ready for the show stay up and stay Bassin brother 🔊🔊🤙🏼

[@mikenapper3725]

Heck yeah Parker new box build coming up

[@joecooke899]

Wow them subs was getting it for sure!!!

[@MayzDayz007]

Pimp P breaking boxes, well built ones too, good stuff bub

[@dilbeckskate]

Was great meeting you at Sundown man ! Sorry couldnt make way around to catch a demo ! ( C-Pillar Excursion)

[@gioarteaga3984]

Well done Parker, great series hopefully we get to see more on this pickup trucks 🤞✌🏽

[@ParkerTheBasshead]

Yessir I’ll do more too it!

[@koffinNAILS]

I've been following this whole setup just amazing work with everyday videos

[@drewanderson8279]

Wish I could of heard it yesterday. I'm too far away unfortunately.. maybe one day ill cross paths and meeting ya!

[@xr6lane]

This series makes me wanna ship some of the black brick audio gear to Australia to try, good work on the videos

[@lowrider4life462]

Wow nice set up..hope that slam panda works out for you..i gave up when my second one stopped working...now its a casing for my fan switch lol.

[@marshmccloskey4359]

Great build video! Good to see someone with such a serious work ethic! I’m sure your mom & dad are extremely proud of you and they should be!

[@kenman6721]

man bought that black brick 15 brick house work for a few minutes stopped working. checked coil nothing wrong. checked ohms good to go at 2.1 ohms. contacted black brick for past two weeks and nothing they won’t hit me back.

[@arthurmartin1449]

Turned out great. Way to put in the work.

[@BentonL]

Wish I had known about this amp before I got my NVX. for the same money I could have got the 5000.1 as I paid for this 2700 watt unit. Assuming its running close to rated.

[@OhWizzer]

I'm really enjoying this series it's helping me learn a lot thank you!

[@tedpollock3256]

Its great to see this build come together!

[@cargatube4473]

Great build brotha that truck be bassin

[@nathanbesse416]

Can't wait for my blackbrick belligerent to come in! Loved this series and excited to see more videos on it

[@ParkerTheBasshead]

I love my belligerent!!

[@ParkerTheBasshead]

I love my belligerent!!

[@MrFlex931]

Blackbrick all day!! Great Subs 🤘🏽🤘🏽

[@mattadams7922]

The next box you build make sure you use lots of wood glue, and then caulk your interior seams and joints. It is a nice build best of luck at the show you've put the work in for it for sure.

[@rogermiles7800]

I can't believe I just dropped so much money on one of these black bricks. I appreciate the discount code bud. Through your link as well

[@ParkerTheBasshead]

You’ll love it man! They are massive

[@rogermiles7800]

@@ParkerTheBasshead that's what I'm hoping. Should last me a long time since I can only supply 3/4 of it's rating lol

[@fareedrakeib2546]

you are welcome bro , with the box we live and we learn ... all the best at the show 👍👍👍

[@jprieto727]

Nice fast build, congrats

[@ronaldwhitt3691]

Hey parker since you've tuned so low try out pure sesh the songs are tuned low low 18-25 hz my 18 loves it. Great sine waves clean rebass

[@B4evrtru-26]

duuude, love your subwoofers, i was planning to build a 800 watt subwoofer for this summer if i earn enough allowance for the particle board and mabye even some waterproof adhesive tape with wood texture and some glue.

[@brianpittman8069]

Nice work man. Pretty loud for 20hz. 😎👍

[@lamonrickbaldwin629]

Pounding man those bricks sound good

[@gregblau8082]

Turned out awesome

[@quintinvandermerwe5063]

Hey man, watched all vidz of ur build up and it was supa awsum.

[@dooflydetailguuy4349]

Subscribed. One time we went through everything on my friends truck because he was losing SPL. Turns out his truck was actually split down the unibody and he lost all pressure. We tore that thing apart trying to figure out why it sounded so bad.

[@georgecampos7119]

That is so cool. I always use screws every 4 inches glue oh don't forget brace on corners and walls

[@shaunmiller9364]

Love the avatar, and blackbrick

[@markjones3282]

That bass knob is bad ass

[@MrDopey32]

Great job Parker! I hope you're having a great time at the show! We all run into small problems in our builds whether it was from over looking or trying to meet the dead line, shit happens. Lol. Can't wait to see your demos when you post them!

[@dragbikedemon]

Awesomeness at its finest!

[@Bulldog729755]

Sounds freaking awesome

[@AdamJDe]

Awesome layout edit that build up was dope dude

[@ParkerTheBasshead]

Thank you man!!

[@iheartmazda]

Wow crazy, how it wrecked that box. A friend was running a Kicker CVR 15 out of a cheap box built by a store in my home town. It destroyed the front plate.

[@bassin_billy4551]

I got a demo from you at the show, it sounded great.

[@shaunmiller9364]

I use to have a slam panda bass knob great product!

[@ParkerTheBasshead]

Yeah it did great at the show!!

[@shaunmiller9364]

@@ParkerTheBasshead awesome he’s a good guy I watch his Facebook ! You can watch him build them!

[@adampaffrath4299]

Bro parker! This series was friggin dope! Can’t wait to see the videos from the show! Keep the subs slapping ! And next blowing up subs videos dude haha! Cheers man

[@95Sn95]

Nice job parker, killer lows, it's hard to get big numbers tuned that low, so a 148 or so is really killer below 30, tuned to 36/40 you would have a pretty stout numbers. I looked up those black bricks and for the money you can't beat them. You can't even build a sub from new parts of that caliber for under $500, I have over $530 in each of my 15s and they have 400oz and 3" 8 layer not a 470oz with a 4" 8 layer coil. The BB HH is a true budget banger, killer value. If they had come out when I built the 1st of my 2 15s I probably would have just gone with those. Only downside is going up to a 4" coil does require bit more power, I only have a 5k so I probably will get more output with 3" coiled subs at that power level. Im building the 2nd 15 now because the motors and TI frames were out of stock. but I've flogged the 1st 15 and on that 5k I can get it stinking with serious bumping with occasional clip light blinks, but with intermittent clipping she heats up fast, ya get stink in like half a song... My custom monster 18 I built with zero clipping laughs at whatever it's seeing from that 5k tho, it actually needs more powah baby. Im building the 15s as D2s so they will be wired to .5 so hopefully I can keep that impedance down bit longer and get bit more slam I think that CAB half bridge will take it...if not guess I'll find one that will.

[@mrgoogan]

Love that you are bumping to some country 🤣

[@keehud333]

Nice build and booming system, have fun and BOOM ON💪🏿💯

[@markjones3282]

That is one best builds ever seen bro

[@Marz-px6vx]

damn bro that is awesome 20hz killing it. I wish I didn't live so far from all these shows or else I would be going to them. let's go parker good luck at the show.

[@Supercharged1976]

Be curious how long that headunit's screen connection lasts with the up and down torque that bass is putting on it.

[@ParkerTheBasshead]

Yeah it definitely had a few issues yesterday. I’ll post an update video on it

[@matt6951]

@@ParkerTheBasshead I’ve kinda wondered about those cheaper Chinese decks being able to withstand a moderate amount of bass.

[@Joe_1776]

@@matt6951 They don't last long, I bought a cheap Chinese double din for a build with 2 Sundown x12s it lasted a week. Lol

[@Joe_1776]

@@DTW-bx2vy I agree, this was a long time ago. I have used a Pioneer AVH-X5800BHS ever since.

[@travisabrahamson5092]

I used to go through screens like gas lol . The bass rips them apart.

[@justinambrose4387]

Had a great time talking at the show with you and I believe I got the first demo there lol I bet those subs will open up even more after the spiders loosen up!

[@karmandeepsi]

NYC system bro I am from India loved your's videos

[@stephenwallace9089]

15s are a Beast man

[@kevinpoole832]

Damb your truck hits good luck at the show I really enjoyed watching you put in work 👍

[@claytonbenjamin7787]

Crazy awesome brother. Loving it

[@elijahdossett3528]

Awesome video as usual! Also, do some interior 45s inside the box. Double baffle would have been far better for the box all around and then triple on top but you live and learn so.

[@JasonWW2000]

The down side to that is you double the weight and double the cost. It really isn't necessary if your smart with the bracing.

[@Revolutionaudio1]

Decals looks awesome

[@MuffinmanT90]

Oh yeah that is big boy 👖 sub right there!!!