10 Extraordinary Raspberry Pi Cases

10 Raspberry Pi Cases Thay You Can 3D Print
PCBWay: Your 3D & CNC One-Stop Solution ➙ bit.ly/MyPCBWay
I have collected some of the coolest raspberry pi cases that can be 3D Printed by yourself, otherwise, you can order to 3d print from PCBWay!
Some cases are compatible with both raspberry pi 3 and 4, some of them are only for raspberry pi 4 or 3
If you want to see more of these kinds of 3D printable Raspberry Pi cases, tell me in the comments below, Maybe I will make another series :)
• FOLLOW US
- Instagram ➙ / engineericly
- TikTok ➙ / engineericly
• RECOMMENDATION
Buy products following links to help the channel:
Raspberry Pi 3B ➙ geni.us/raspberry-3b
Raspberry Pi 4 ➙ geni.us/raspberry-4
Noctua 40X10 Silent Fan for case №7 ➙ geni.us/noctua-fan-4
30x30x7mm Fan for case №10 ➙ geni.us/raspberry-cooling-fan
Electric Screwdriver (used in this video) ➙ geni.us/motorized-screw-driver
Ender 3 Pro ➙ geni.us/ender3-pro
Ender 3 V2 ➙ geni.us/ender3-v2
Ender 3 Max ➙ geni.us/ender-3-max
Ender 3 ➙ geni.us/cr-ender3
• CREDITS
00:00 - Intro
1 ➙ 00:11 - TARDIS case with removable Top for Raspberry Pi 4: www.thingiverse.com/thing:469...
2 ➙ 01:03 - Raspberry Pi 4 case: www.prusaprinters.org/prints/...
3 ➙ 01:45 - Folding Raspberry Pi Case: www.thingiverse.com/thing:286...
4 ➙ 02:37 - ePIc snapPI hinged pi case: www.thingiverse.com/thing:274...
5 ➙ 03:34 - Pi4 Case + FanCover w/Camera Slot: www.prusaprinters.org/prints/...
04:58 - Your 3D & CNC One-Stop Solution ➙ www.pcbway.com
6 ➙ 05:33 - Raspberry Pi 4 B Low Profile Case: www.thingiverse.com/thing:377...
7 ➙ 06:02 - Pi4B Flat Fan Case Noctua: www.prusaprinters.org/prints/...
8 ➙ 06:23 - Raspberry Pi 3 Model B Media Center: www.thingiverse.com/thing:285...
9 ➙ 07:14 - Waveshare 7" HDMI LCD Case: www.thingiverse.com/thing:344...
10 ➙ 08:22 - Parametric Raspberry Pi 4B Case with vertical stand: www.thingiverse.com/thing:457...
• DISCLAIMER
- All extraordinary acts in this video were done by video editing.
- We don't own the 3D printed models in this video, They belong to their respectful owners.
- Some works may be done in the background to make the video more interesting
• TAGS
#3dprint #raspberrypi

[@engineericly]

Which one did you like the most? 🙂

[@hadiavlogofficials]

The one you put in Thumbnail of your Video 👌

[@engineericly]

@@hadiavlogofficials Thanks for the answer!

[@hadiavlogofficials]

@@engineericly Always welcome Brother 🥰

[@piotrzieba2890]

No. 8 This color, big Raspberry logo and the idea of hanging device on the wall. Great work.

[@elektron2kim666]

I liked the phone box and the low profile thing. I'm more into functions with my own stuff. In a sense a whole lot is missing in the RPi world. A power bank should snap onto a case like Lego or with magnets and separate easier for long trips in Norway. Add "snow cooling" or something and 3 extensions of the GPIO which everyone likes, but there is only one (usually) and stacking the RPi stuff makes it a high tower so you can't take it with you on a bicycle.

[@olafb.2929]

Some really great designs. The last one is my favourite. And yes, make a second part.

[@engineericly]

Thank you for your feedback man!

[@dombrown3335]

Can you please link this awesome screwdriver?

[@behlaburhani231]

That was actually amazing

[@amadoutoure9420]

Please!

[@engineericly]

Hello, here is the link: geni.us/motorized-screw-driver It is my affiliate link, it will not affect the price but help my channel if you buy :)

[@engineericly]

@@behlaburhani231 I have added

[@engineericly]

@@amadoutoure9420 I have added

[@VirKap99]

I loved all but personally would make a sleek matt grey one with a cooling fan and openings in the top for gpio pins and camera module, screen module etc ports, with an in built thin profile battery for backup power. But great video for inspiration. Loved the vertical stand idea.

[@3dprinterly]

thanks i had been looking for a case. love your videos btw! ps with the support ive found a small flat head screwdriver helps alot with support removal and not getting cut. how do you do thoes support blocks? it would make support removial easier!

[@sapnarani2095]

Hello bro remember me? I saw you from the very beginning but had to disconnect for sometime due to studies But I have to say the production quality has increased a tonn since then... Loved to see you grow ❤️

[@engineericly]

Hello, Of Course yes, I Do! Thank you for giving attention, happy to hear that!

[@shykitten55]

Some of those are really nice. Thanks for sharing them. Feedback: 10 - as nice as it is, if the ethernet (and USB) ports are at the top it could be a bit unsteady. Would it be better to have the machine so the power cord plugs in either at the top or bottom I guess this depends if the machine will have an HDMI cable plugged in to it also.

[@johowohoj]

Curious what you call those supports in the dome tome case. The one where you cut your finger… I printed it without supports and though it will work, it doesn’t look too good… Sorry for the newby type question but I’m just getting started in this stuff… thanks for the great video…

[@chromabu]

I am trying to get a nice case for the Raspberry Pi 3b+ terra pi setup. It has a hard drive and the board. The option that was included with the TerraPi kit is verticle and very awkward. It doesn't stay together well when moving it. And looks bad in general. I am hoping for a mount that has the drive on the bottom, and the Pi on top of the Terra Drive. While making the audio and HDMI ports, USB ports, all functional too.

[@dannyh1]

Thank you for linking the electric screwdriver, could I have the screws you used in this video?

[@RAVINAAAA]

🤭😅Usually ...like it...When Sir...you are Talk about...(( Di's iz 3D printed))👍🏻🥰😇🤷🏻‍♀️😇🤩

[@dannyvannierop805]

Awesome video.......downloaded a few files for my needs. One question though.....where did you get the assortment box with bolts,nuts and washers from?

[@engineericly]

Thank you. From Aliexpress, Here are my suggestions: geni.us/bolt-nut-set

[@Rodox2k10]

Nice video, but I've been using my Raspberry Pi Model B+ (Yes, the first version). Would you happen to have a version of the last case for it? I'll pay for the files and for your time.

[@makedaevilmage]

Do these cases also work for raspberry pi 3 b+?

[@keshav2136]

I want a case for my Raspberry Pi Zero W with BadUSB Tried finding it but couldn't. Pls send me a link of you find.

[@samagarwal3804]

I am looking for one 3D-printer case for my IOT-set which is a combination of a) Unit-1: raspberry-pi+raspberrypi-camera+HCSR04P-sensor b) Unit-2: displayscreen. I want to merge Unit-1 + Unit-2 and want to develop a case for it. WOuld you be able to help engineericly ?

[@mahansalehian2581]

This is so cool!!!

[@engineericly]

THank you for your feedback :)

[@quickben2090]

Nice, many cool designs

[@astroko]

Wont the PLA get damaged over time because of heat? isent PETG better suited?

[@cenksuzer4963]

last one is best one

[@the3dshack497]

wow cool prints🔥🔥

[@engineericly]

Thank you!

[@kreinova2747]

So right now we are only having this case withou any Pi 4 XD, im gonna put my pi zero 2 into this

[@larussoi3522]

Link for the screw driver set , please.

[@NinjaArt99]

Cool video but what's with new theme of 'throwing components/thing into frame is cool'

[@emperorempoleon2027]

What material did you print these in? Cause i know certain filaments can warp at the temperatures of the raspberry pi

[@engineericly]

Hello, I used PLA for better filming experience, but I would suggest to do it with PETG or other heat resistant materials

[@emperorempoleon2027]

@@engineericly ok thanks

[@shinoshikumi3832]

What turntable is that?

[@trollenz]

Very cool. Thanks.

[@engineericly]

Glad you liked it!

[@AndrewAHayes]

I wish I could buy another RPi4 8Gb to put in a new case

[@antoniocardenas4678]

What.kind of printer 3d the ender 5 pro?Abs o pla ?nice design!

[@gamescents3719]

Where can I get that screw kit?

[@engineericly]

geni.us/motorized-screw-driver

[@gamescents3719]

@@engineericly thats cool also but I meant the assorted kit of screws you had

[@JosephinemicricangeloeAngelo]

You must be careful when you use sharp material for cleaning the models

[@engineericly]

Yes, Thank you!

[@JosephinemicricangeloeAngelo]

Please print pokemon toys

[@juliol.7081]

Nice!! 👍👍👍

[@Dann.y]

Part 2 please

[@wrzosu2777]

What printer?

[@raphaelbouchet1]

A nice video

[@engineericly]

Thank you for your feedback :)

[@hakunamatata7422]

What is raspberry pi?

[@kiyotakaayanokoji3065]

It's a hacking device, capable of hacking the Pentagon.

[@TechExploresNYC]

Maybe start with finding a raspberry pi first....

[@engineericly]

😜

[@dkhl02]

cuando te aburres y no tienes nada que hacer

[@Mirza5138]

hi

[@engineericly]

Hey man!

[@gleissonsilva3881]

Name music?

[@rpals5412]

screwdriver!!! brand name and model?

[@engineericly]

geni.us/motorized-screw-driver

[@rpals5412]

Thx !!

[@makewithmegma]

🔥💕👌👍

[@engineericly]

Thank you so much!

[@r4dius]

The best designs, the shitiest printing quality

[@imp4556]

物をぶん投げるな。

[@vastvoidnoid]

Get rid of the music