10 inch Rikon bandsaw 10-305 owner review

[@randywl8925]

6 years later, $580. Thats just fine. i bought one at a pawn shop a couple days ago for $160. Its like brand new, no dents or chips in the paint at all. Im checking out videos to learn about what i bought. Thanks for the video, it filled in some blanks for me. 👍

[@works4me]

Glad you got a good deal on one. Thanks for watching. Mine is still going strong.

[@kimberlystubbs8422]

*Perfect band saw for the hobby enthusiast **MyBest.Tools** Easy to set up and square. Had it running in 10 to 15 minutes. Quality of cuts will depend on the quality of the blades.*

[@cankerscarves1806]

Thank you for linking me this video as well. You're right, removing that piece is literally 3 seconds. I'm not sure why someone even complained about that. Thank you for the detailed videos These sure beat the robotic voice reviews!! haha.

[@works4me]

Glad I could help!

[@dgperforms1]

Thanks! You earned a new Sub

[@works4me]

Thanks for the sub!

[@DavidBealeakaFKD]

looking at getting a bandsaw and the Rikon 10-306 is now out. You say at the end of your video "I wish it had a 1/2 hp motor" Well your wish came true, the new version is 1/2 hr. You show how well it can cut with 1/3rd - the 1/2 can only be an improvement. Thanks for showing me how well this one cuts.

[@rogerlyons209]

wow I was wondering why you had screw stuck by your blade not until I really looked at it, it was the mightier in the table good job !

[@jw4321]

Best review I have seen on this. No stupid music and you answered mu question about releasing the tension when not using it.

[@nobbywood]

Top👌

[@MrCaesar2u]

I have a cheap POS right now and I'm starting to turn wood. This is on sale so your video sold it for me. Thanks for the demos. They help give a clear idea of performance.

[@okok-uh1wd]

Do all 4 of the guide bearing on the left and right have to be touching the blade?

[@works4me]

None of the guide bearings should touch the blade when adjusted correctly. There should be a thickness of a business card away from touching. When sawing a piece of wood, the blade will be pushed around and touch the bearings slightly. This is normal.

[@tlcasey1002000]

KNOW WHERE I CAN GET A LARGER DRIVEN PULLEY SO I CAN SLOW THE SAW DOWN FOR CUTTING METAL? THANKS

[@works4me]

I would start with calling Rikon. The new 10 inch has two different speeds so two size pulleys. Might be interchangeable but I'm not sure.

[@tlcasey1002000]

@@works4me I THOUGHT ABOUT PUTTING A VOLTAGE CONTROL INLINE!

[@ScotchAddict35]

Thanks for making this video. I’m going to be buying this model I think. A full size 14” is out of my price range, and needs, and this one seems to be the best of all the benchtop models. I’m definitely going to be using your dust collection idea too!

[@works4me]

I just uploaded a new video with the dimensions and instructions for the dust port. kzbin.info/www/bejne/oqTEqmh_j7uYjpY

[@ecaff9515]

Thank you so much for sharing. I was considering purchasing a Rikon 10". Your video was an excellent source of an true review. Perfect video...

[@brendarichardson7271]

*Making a hardwood fence for the miter makes all the difference **MyBest.Tools** Tune the saw with a combination square. Adjust the laser so its in line.😂🤣😂🤣😂🤣😂🤣See the photos.Every part in this saw is adjustable.😎😭*

[@zingsting9595]

It cost $350 now on amazon. Boy, 2020 is the dumps.

[@aaronboyles5237]

I’m shopping now and found it about $30 cheaper on eBay

[@randywl8925]

Try pricing it now 😱😱😱

[@YouGumppy]

Just purchased a Rikon 10-305 from Sears (their 10 inch bench bandsaw is being closed out so went ahead and purchased the more expensive Rikon). I want to make dust extraction such as yours, so thanks for posting the video. A couple measurements on the multiangular piece are missing. Otherwise it's a very useful instructional. Thanks.

[@works4me]

I just uploaded a new video with the dimensions and instructions for the dust port. kzbin.info/www/bejne/oqTEqmh_j7uYjpY

[@hrebing]

Was getting ready to buy this saw, thanks for the video.Now I'm off to woodcraft to mine....

[@TaaffesWorkshop]

Thanks for the video. I'm planning on purchasing one of these machines soon and this review really helps in making my decision.

[@sumandl]

Nice review. We actually do not have Rikon here in Europe, but simillar in size by other brands. And right now i am about to get one of those small machines. Good Job - subscribed!

[@myronlubman1051]

Very good. Did you know that the Craftsman 10" bandsaw is the exact same saw? I bought mine at Sears and with all of the coupons it cost me $125.00. I agree that the supplied blade is not so good but I bought some good ones on Ebay and it makes a world of Difference.

[@works4me]

Yes, I did know that :)

[@aarondavid826]

great review, thanks

[@Scarekrow24]

Could you do a setup video or link to a good setup video?

[@denniscotey8182]

Search youtube for "Band saw clinic with Alex Snodgrass". Best set up video on youtube hands down..

[@carydickinson4466]

Do you have the measurement for the last piece you installed

[@works4me]

I just uploaded a new video with the dimensions and instructions. Let me know what you think. kzbin.info/www/bejne/oqTEqmh_j7uYjpY

[@MichaelDavidHiltner]

Thank you Kindly for sharing! At 2:08 is where I knew I found what I was searching for! How to adjust my tracking. Quick fix for my blade change.

[@deranged8779]

I just got this saw from Santa & it's all set up in my shop. Right out of the box... it's a great saw - 30 minutes to set it up & I guess I'll be fine tuning it as I go.

[@algorel4763]

Can anyone recommend what brand other than Rikon, to buy a 5/8” bar Mitre Gauge. Craftsman, Skill, Ryobi, etc. for my Rikon 305 Thanks!

[@mikej2092]

Glad you like yours. I've had mine for a little less than a year and disappointed in it. The fence is horribly unreliable and just doesn't attach to the base very good at all. I'm not sure if I can't get blade tensioned right or if it's just a cheap blade like you say, but the blade bends or the motor bogs down. How did you determine the right tension? And what blade did you get? That'll be my last attempt to keep this POS, if not I'm ditching it and saving up for a Grizzly.

[@jorgenhoutsma8440]

what blade you used to replace?

[@works4me]

1/4" 6 tpi Timberwolf for standard cutting and 1/2" 4 tpi Timberwolf for resaw. I also have Starrett brand blades as well.

[@chriszaferes6418]

What blade do you suggest for this band saw? I just purchased one.

[@works4me]

1/4" Timberwolf blade for standard cutting and 1/2" 4 tpi for re-sawing.

[@hectorgerco2963]

Hi I bought these same bandsaw and for me its impossible to cut curves , every time I try the blade goes out. Can you help me ?? I did change the blade , and now Im thinking in changing the motor. I have a 1/2 hp in 220 v a little bit bigger. What do you think about?? Thank you in advance Im Hector from Argentina

[@works4me]

First, if you haven't already then change the blade. You should be able to cut any curves successfully with this saw if it's properly tuned with a good blade.

[@cherylcentenioblessedvirgi3241]

Thank you for sharing.

[@davidpermenter6527]

I have this same saw and was wondering if You have the template for the additional dust collection port You set up? Thanks, David

[@works4me]

I just uploaded a new video with the dimensions and instructions for the dust port. kzbin.info/www/bejne/oqTEqmh_j7uYjpY

[@poindexter1387]

Great review 👍

[@hectorgerco2963]

very nice video, very helpful , I have the rikon bandsaw similar to yours , can you help me , because I cannot do straight cuts , the blade bends , I bought last month the machine still have the factory blade , but no way , can you tell me if I have to buy another blade or what to do. Thank you Hector from Argentina

[@works4me]

Yes. Please purchase a new blade. It's a whole different saw with a good blade.

[@watermain48]

Does Woodcraft carry decent blades for that saw? Thanks, nice look at your saw and dust collector.

[@works4me]

Yes. They carry the Timberwolf and Starrett brand.

[@OldDunollieman]

Good video.

[@STLCCRT]

Are you still happy with it? I've been thinking of this model but haven't made my final decision yet. Was that little piece you made for the the extra dust port difficult? Thanks for the review!!!

[@works4me]

I still love this little bandsaw. Keeping a good blade on it helps a lot as well as keeping the guide bearings pretty snug. The dust port isn't hard to make. You can buy the dust port part and then glue a wood block to the end and glue on some magnets.

[@works4me]

I just uploaded a new video with the dimensions and instructions to make the dust port. kzbin.info/www/bejne/oqTEqmh_j7uYjpY

[@whknee]

what max size have you tried to re-saw? How well does this saw cut a straight line? I am tempted to get this saw, but I am fearful of reviews of smaller benchtop bandsaws never being able to reliably cut straight, especially with resawing

[@works4me]

With a 1/2" 4 tpi blade you can reliably re-saw with this. You have to be mindful of how hard the wood is and your feed rate as 1/3 hp is limiting. I re-saw up to 3 and 1/2" on a regular basis cutting medium hard wood. No super hard woods though. If you are going to re-saw a lot then move up to the 14" Rikon with open base.

[@luv2hike27]

Thanks for the video! I just purchased this saw from Highland Woodworking for $199.99 great price. Can you send me the dimensions you came up with for your lower dust collection port on the front and also is there a part number for the plastic dust port you used and did you modify it to fit? Thanks, Mike

[@works4me]

I just uploaded a new video with the dimensions and instructions for the dust port. kzbin.info/www/bejne/oqTEqmh_j7uYjpY

[@tinkywinky3680]

U happy with this bandsaw???? I found it at Menards for $219 but haven’t pulled the trigger on buying it yet

[@works4me]

Yes, very happy and I just made a circle jig specific to this little bandsaw. kzbin.info/www/bejne/n5vVgGxqp5Z_o8U