10 MACHINES You Never KNEW EXISTED -2-

We take a look at some of the weirdest/amazing machines out there:
Sources & Credits:
10. Cleantech Series
www.laserphotonics.com/handhe...
/ @laserphotonics
9. Integrex E-670H
www.mazakusa.com/machines/int...
• INTEGREX e-670H
8. LaserTube LT
www.blmgroup.com/lasertube/lt7
• LT7 - Tube fiber laser...
7. FGTF-Y Series
www.wodico.com/product/glass-...
• Flat & Bending Glass T...
6. Flippy - MISO Robotics
misorobotics.com/
vimeo.com/misorobotics
5. Stewart Platform
• FUM Stewart Robot Desi...
• Stewart platform UiA
4. HARSCO Rail
• Racine Tie Straightener
• TX16 Production/Switch...
3. TWIN D
www.afron.com/products/product...
• AFRON Harvesters and S...
2. HEAT H1/H2/H3
www.arnold.af.mil/About-Us/Fa...
1. NIST-4
www.nist.gov/srd/nist-standar...
Music:
"Inspiring Technology" From Envato
"Beyond The Stars" From CO.AG Music
Please contact me at [e-mail] if there are any issues about footage being used and I will remove it asap, thanks!

[@Tech_Planet]

Thanks for helping me reach 200k subs! I just do this for fun part time and never thought I would get this far. I really appreciate any view/support!

[@ravanabrahmarakshas4263]

drink coffee before recording. you are talking about the most beautiful, most complex, works of art (specially that army weapon), and your voice is so ...x... x is exactly opposite of those you are talking about.

[@Tech_Planet]

@@ravanabrahmarakshas4263 Heh, yeah I can try to do that, thanks for the feedback.

[@VeganV5912]

@@Tech_Planet , . ‘Smells baaad’. 6 hours !!!! 🔴🦌. 5 days or more sitting inside your stomach puuuu-trifying !!! No fibre if you eat animals in their secretions !!! Timelapse. kzbin.info/www/bejne/op62o4isnLycp6c .... 🤢🤮.. That’s why I am vegan !!!! And I’ve gotten bigger and stronger and fitter on a plant based diet. Scientific fact !!!!.....………

[@n3lis94]

"Machines you never knew existed" - 5 axis CNC machine - Laser cleaner - Laser cutter on a robot arm - Stewart platform Maybe it's because I studied Mechanical Engineering but some of these really aren't so special. That arc heater and scale are super sick though.

[@louf7178]

"Sick"

[@mohamadothman9208]

i knew of these machines in generals but these are really super cool videos showing how advanced they are. so i am cool with it

[@SethiozProject]

you need to study mechanical engineering to know these machines? .. you must have very low IQ. I never studied any of this, yet this video didn't teach nor show me anything I didn't already know.

[@n3lis94]

@@SethiozProject Sure, I went to University in the Netherlands, did one of the hardest technical Bachelors available, then I decided to also do one of the hardest Masters available and graduated with a 9 out of 10. But yes I have very low IQ.

[@ericfermin8347]

The irony of Americans more precisely measuring the kilogram.

[@karlsangree4679]

So nice to see the object in the thumbnail actually talked about in the video.

[@justincosby2258]

I love those lasers but all I can think watching them is that smoke must be absolutely atrocious! Lol

[@joechristensen7308]

I wasn't down for robots in fast food but if you think about it. If a robot is cooking your order. They're making it fresh everytime. You'd have a warm meal everytime, instead sometimes getting cold fries with no salt.

[@ironhorsethrottlemaster5202]

The railroad piece of equipment is called a tamper with the vibrating fingers they camp or compact the ballast Rock underneath the railroad and if you're wondering why they use that ballast Rock in the first place it's for drainage and to keep the railroad track locked in place cuz they can pack the rock around the ties peace out into the world have a great day I am Rail fan that's why I know this information

[@Tech_Planet]

Nice, thanks for sharing!

[@ironhorsethrottlemaster5202]

@@Tech_Planet if you think that piece of railroad equipment is cool check-out a Loram rail grinder especially if you can find some videos of that machine at night at throws Sparks it profiles the railhead so they can get longer life out of the rail overtime heavy trains pounding on rails make the profile of the rail rough on the inside edgware the flanges ride rail grinder grinds a new profile on the rail like it's brand new but it leaves these really weird imperfections on the rail that make the trains that have a certain sound after the rail is Ben ground by the rail grinder peace out into the world have a great day also check out the liquid piston rotary engine that's another cool that has come out recently

[@ironhorsethrottlemaster5202]

@@Tech_Planet also check out these railfans called thornapple River rail. Series they have an episode on railroad maintenance of Way equipment

[@coronalight77]

@@ironhorsethrottlemaster5202 lol

[@scarman5367]

Cool video! As a physicist working in precision measurement, the last one is the coolest to me personally. On a side note, people usually pronounce “NIST” (National Institute of Standards and Technology) as if it were a word (rhymes with “mist”), no one really spells it out. NIST also does precision timekeeping, with atomic clocks that are precise down to

[@newt9908]

Commenting so I can get more of these videos.

[@roberine7241]

4:36 that abbreviation sounds like something Tony stark would think of

[@yoteslaya7296]

fast food workers *sweating intensifies*

[@GeeKayKayGee]

Interesting, but my thumbs up is for the NIST-4

[@ddegn]

Seeing the Steward Platform used out at sea reminded me of another complicated sea going project called Makani. Take a look at a video titled *Pulling Power from the Sky: The Story of Makani [Feature Film].* It's on the *X, the moonshot factory* channel. This sort of thing seems like something you'd be interested in. Thanks for another fun and interesting video. You have a knack for finding interesting gadgets.

[@Tech_Planet]

Thanks, I will definitely check that out!

[@Graeme_Lastname]

Yeah, I did enjoy it. Thanks cob. Keep well. :)

[@benlarson8043]

For the NIST one would imagine that once you began measuring on such a precise scale that gravitic fluctuations such as the position of the moon would come into play.

[@Tech_Planet]

Great point.

[@alexandrevaliquette1941]

That's right... so they will nuke the moon. Stay tuned!

[@1943vermork]

They scanned the gravitational field of the lab where it’s installed.

[@SkipSpotter]

I love this channel cuz the future is so near you can almost touch it. These are very exciting times

[@TheLastStarfighter77]

As Spock used to say, Fascinating!!!

[@kevinstephen1640]

cool can hardly wait till it comes out

[@rowanmoormann9532]

Thanks for Sharing this

[@patentseekersresearchinc.4290]

Great video!

[@roberine7241]

3:10 that crane is vibing

[@Themiddleman416]

Company I work for in Canada moves those mark 4's and all the other rail construction equipment. It's all pretty cool stuff!!!! We have trailers specially designed to haul them on the highway.

[@Tech_Planet]

Awesome, it would be great to those in person!

[@Themiddleman416]

@@Tech_Planet come to Canada 🤣 we have a few Oshkosh's you can play in too 🤣

[@AlCatSplat]

@@Themiddleman416 they already live in Canada

[@ag135i]

Awesome very well presented.

[@Tech_Planet]

Thanks for sticking around! I will also try to make more videos for machines, maybe a series?

[@ag135i]

@@Tech_Planet yes surely go ahead with it we will watch and enjoy the useful infotainment stuff.

[@Deminutuv]

Imagine, you and flippy at 3am and a drunk guy walks in asking for some fries. Mouth drooling as he stares in awe at flippy in action, while you step on some lettuce and spit in some drinks.

[@jonesmatthew7511]

very interesting, thank you!

[@mytrueself1598]

Perfect for Klaus Schwab's : The Great reset when we only have 500 Million people left in a few years

[@shauljonah6955]

Yanks for the video 📹 some very good machines.

[@Stop-and-listen]

I guess SpongeBob is going to be out of work.

[@Tech_Planet]

Hah, yeah

[@btf_flotsam478]

To be fair, the big robot's probably going to be more expensive than minimum wage for a good while indeed.

[@orowizard1369]

@@btf_flotsam478 Yeah, but, figuring in the goof off, smoking, bathroom break, being on phone when not supposed to, sick, vacation, etc. times, not so bad. And no lip from employee. Plus, the prices will go down and abilities will go up in time.

[@catkeys6911]

2:40 I can just see one of these things working in the kitchen of a bar, with John Taffer of Bar Rescue screaming at it for not flipping the burgers to his liking.

[@orowizard1369]

And then, it challenges him to a cook off and wins!!! lol

[@justingrey6008]

So.. your pricing is off on the CNC. Custom machines with fixturing can run over 5 million. And for the most part specialized CNC is going to be custom

[@danielgudi7446]

A company I worked at said a new one was around 0.5mil bucks, it was a standard CNC with 5 axis. Yes fixtures cost more, however, he never stated that a custom one was in that price range. He said a production run model was that expansive. The one he showed was a standard run of the mill Mazak. The Integrex is nothing new for Mazak either.

[@will2see]

Planck constant is not a variable. It's a constant.

[@KhorzIskariot]

Fair play to you, saved me from writing a comment. XD

[@constantinvasiliev2065]

Amazing. Thanks

[@marcfruchtman9473]

Very interesting!

[@Jkauppa]

you could drive on rotating brooms, make the bending flexible enough

[@Baard2000]

@5:00 Finally I know what my brother built in his shed......

[@mark6302]

hell yeah french fry robot

[@kurtkurtson9111]

2:30 McDonalds employees: we want $25/hr McDonalds:

[@johneygd]

I did know about most of these inventions.

[@alexandrevaliquette1941]

I already have most of them at home.

[@joeross6523]

"Titanium and even copper". That's strange.

[@mych3810]

Copper I agree, anything can cut through Copper, even a butterknife(personal experience), but why is mentioning titanium strange?

[@joeross6523]

@@mych3810 it's stange that he said "titanium, even copper". Thats like saying a chansaw can cut oak, even butter. If he'd said copper, even titanium that would have made more sense.

[@alphagt62]

Copper is hard to cut with a torch, it leaves a ragged edge, so if it cuts copper cleanly, that’s something. Saying from copper to Titanium is specifying it’s range, from the smallest, most delicate to the hardest, most heat required.

[@alphagt62]

@@joeross6523 but they are still burning through metal.

[@joeross6523]

@@alphagt62 after further investigation I've learned that it actually takes more energy to cut copper with a laser because of it's ability to conduct heat.

[@Simcadepro]

its not a stewart platform its called a hexapod 6dof, i build these for a living in the aviation industry

[@jacobringgaardmikkelsen5103]

Whats the difference then?

[@jasonpavlik4904]

A simple google search revealed that... en.wikipedia.org/wiki/Stewart_platform

[@Decurain]

You're correct I work for the company featured in the video, we jokingly call our systems "upside-down flight simulator"

[@n3lis94]

It's both, that is what I learned in study.

[@LarsonChristopher]

Tesla's new presses - add that next vid.

[@airfunmachinery8655]

Awesome very good, powerful and clever machine, awesome invention! Love your video, thumbs up from me

[@Tech_Planet]

Thanks, I appreciate it!

[@wolf359loki]

2:37 If we are replacing peoples jobs with robots and AI, The Politician needs to be the first to be replaced. I mean really, the processing power of a Rumba would be enough I am sure.

[@MrSeth166]

I totally agree 👍👍👍

[@ChuckCoy]

Knew about six of these.

[@colonperson9]

The laser cleaner or whatever the fuck it is, its the first one you went over, burns off all of the rust and paint because it absorbs the light while keeping the metal intact because it reflects the light. Not sure if you said that or not but it sounded like you gave a different explanation

[@KINGFLX]

Cool

[@logannewman4532]

Imagine thinking that a Mazak Integrex is the pinnacle of machining technology. LOL! That's a mid-range unit dude.

[@tangobayus]

I'd be interested in knowing what you think the top end products are. Thanks.

[@logannewman4532]

@@tangobayus Grob, DMG, Makino...to name a few. Pretty much anything in their line will be way better than the equivalent Mazak.

[@tangobayus]

@@logannewman4532 thanks. i'll look them up.

[@Creativ_DIY]

Ingin buat tapi gak tau caranya hehehe..

[@Anipluscelebe]

Awesaome.. except the cutting trees machine..

[@StevenLightning]

It doesn’t cut them, it just shakes them to collect the almonds.

[@xav5351]

wow all tech that I 'never knew existed', I've been aware of for like 10 years. Nothing exciting

[@routtookc8064]

10 years ? really ?

[@n3lis94]

​@@routtookc8064 Laser ablation, 5 axis CNC, laser cutting, glass presses, railroad tamper, stewart platform? Yes all have easily been around more than 10 years, some multiple decades even.

[@F8Tributo]

Some of the info was uneccesarily shallow, I felt

[@GreenGateTV]

NIST is crazy I believe this will also help open doors to time travel and perhaps new propulsion systems

[@Andreas-fe3hx]

Obviously I need to change my definition of Never KNEW EXISTED.

[@jb3704]

New and improved? It's either new or it is improved. Cant be both at the same time...

[@user-ec6bb6te7b]

뭐

[@you_just]

mass-energy equivalence is not about lifting weights with electromagnets, it's about how mass and energy are literally the same thing.

[@blacknoir2404]

0:09 already knew that one existed. not off to a good start....

[@vasyapupken]

"MACHINES You Never KNEW EXISTED" - yeah the good old Mazak Integrex are definitely one of those (no). and various CNC *machine name*.

[@OB1canblowme]

Since when is Mazak anyone's first choice when it comes to demoing impressive machines anyway? 😂

[@varyokh]

ive always heard from producers and gardeners that shaking a tree is very bad for it and makes it not be as successful the next harvest

[@Tech_Planet]

Interesting, I wonder if Afron will follow up on long term harvesting?

[@ckdigitaltheqof6th210]

Whos going to be the first bitter, just to make the cost less for everyone with price and demand.

[@themalcontent100]

2:52 but can it spit in your burger?

[@Mrbeefy957]

👏👏👏👏

[@goldslinger]

Number 6 is a minimum wage raise killer.

[@michaelconroy9975]

No matter what is in front of people's eyes they still believe they are part of the future.

[@RWZiggy]

Flippy the fast food robot was fired after one day, couldn't keep up with demand. I don't see most jobs getting replaced with automation in the next 10 years.

[@BobbyIronsights]

Thumbnail 4:37

[@lmeza1983]

#6 : Wojak you better be afraid.

[@tensevo]

Hi Zoomer

[@kd8393]

Bottom line. As long as "it"can be unplugged.

[@user-ef2qd2pn2i]

Kitchen robot 😂😂😂😂😂😂 sponge Bob would mad from it cause it stole his job

[@RetroGamerzzzMUSIC]

Thumb up but I knew

[@Chriscovelli1]

Great video! Something for everyone to think about......the human race is intelligent enough to make robots that can replace menial jobs. Yet not intelligent enough to understand that as the population increases, and jobs get replaced, we are creating an obvious problem. The future will indeed be slums full of poor people, while the rich live in the skies with their luxury.

[@kudlaty88r]

Wow 5 axis CNC who would imagine! Except that they exist for probably more than 30 years.

[@user-ec6bb6te7b]

멀티언어과

[@htomerif]

Why getting so many things wrong.

[@rautamiekka]

For many of these things, those are scam prices.

[@gillianbennet8279]

best comment my

[@georgeporge9505]

I knew they all existed... nothing special

[@bodohornberger4520]

Pretty hard to understand. Perhaps you could talk a bit more slowly and clearly.

[@user-ec6bb6te7b]

개구리강석준

[@AliensKillDevils.]

Enjoy Sunshine and Please be Vegan, no animal eggs, milk, and honey🥬🥗🌽🥕🥦🥥🥑🍓🍇🍌🍎🍐🍑🥭🍅🥒🍉❤️🌞🌈👼❤️🏖

[@luttrwe7688]

Robots.

[@ffjsb]

$15 an hour minimum wage is how you get a robot to run a fryer. Goodbye to all those summer jobs for teens and people just getting out of prison. Now there's going to be no jobs for many of them...

[@callmeshaggy5166]

Listen to this old-ass speech from 2013. You're probably not aware from watching newsmax all day, but most places here in the real world are hiring above 15 AND offering a sign-on bonus. Can you imagine still making that the hill you wanna die on??

[@n3lis94]

Haven't you seen Charlie and the chocolate factory? They will all get jobs repairing the robots!

[@viggo48sam]

Wav lækkert❤️❤️❤️🏁🏁🏁🇩🇰

[@joelperillotempra9324]

The robot HRM cooker well actually there's an a 2 walking robots like human they are guarded to the highly protected room where the precious gems and gold are stored and can disguize as a human but once that you get a belongings that attached to their body that's your fault becouse once they touch you maybe you felt bad you elecroducted by them

[@user-ec6bb6te7b]

대한민국고노태우대통령전대통령이명박근혜민대통령문재인대통령윤석열잘례시장대한미국해오ㅙ70억명예배할랠루야아멘

[@orowizard1369]

what does this have to do with video? translation: President Kim Myong-geun, President of the Republic of Korea,President Park Geun-hye, President Yoon Seok-yeol, Mayor of The Republic of Korea

[@manuelunder6693]

...

[@nclove502]

aj nułed vro :)

[@PushyPawn]

I knew 9/10 of these machines existed. So you get a 👎.

[@hotcheeksoreilly]

Sigh. That machine is not "the NIST", or "a NIST". NIST = National Institute of Standards and Technology (a US public institute), they just wrote their name on the side of it. Like calling a rocket "the NASA", 'cause that's the word you saw painted on it. What other information in this video is nonsense? Thumbs down.

[@ivandasty277]

I like your channel but there is a matter here : I , as a person whose language is not English ,have some difficulties in understanding what you say . Please if possible speak a bit slower and clear . thanks a lot my friend. 👍

[@habiks]

I sure miss the dislikes.

[@justinmorgan2126]

wrong...

[@joonashannila8751]

Well I knew every single machine in this video tho.. What a bullshit clickbait title

[@michaelbryant4703]

Click Bait

[@Convolutedtubules]

Speak more clearly please.

[@Ricklyplinth]

It's a real shame that automation taking over undesirable tasks is often seen as a bad thing. Really just another reason to get rid of capitalism.

[@CelloandAnayaJ]

I’m happy for flippy no more no skill having people complaining about a “fair” wage while not being able to get a number one no cheese correct…..can’t wait

[@Anachronos1]

All this machines are old tech. I dont see anything new.

[@goofyfoot2001]

When Burger king and McDonalds become automated, I may again try them. I don't trust them at the Moment. Chick-fil-a is the only place I trust.