10 Tools That I Don't Want To Live Without!!!

  Рет қаралды 16,082

Tinker With Tools

Tinker With Tools

Күн бұрын

Пікірлер: 65
@goncalovazpinto6261
@goncalovazpinto6261 Ай бұрын
The Dewalt screwdriver is definitely a game changer! Assembling old industrial metal shelving with dozens or maybe hundreds of nuts and bolts to tighten the Dewalt really saved me!
@TinkerWithTools
@TinkerWithTools Ай бұрын
Perfect application in my mind!
@sswwooppee
@sswwooppee Ай бұрын
I have the DCD805 in large part because of your recommendation. It has not disappointed me.
@soundslight7754
@soundslight7754 Ай бұрын
ditto 👍
@TinkerWithTools
@TinkerWithTools Ай бұрын
It’s a great drill (both the 800 and the 805)!
@RichAdent
@RichAdent 17 күн бұрын
The fastcap makes my favorite tape measure. Has a Great Clip, a pencil sharpener and a place to write down your measurements. Was very handy when I was hanging 1000s of feet of crown molding.
@TinkerWithTools
@TinkerWithTools 15 күн бұрын
It's a favorite of mine as well, just not quite to the level of this Stabila. For the price though - Fastcap is awesome.
@psubond
@psubond Ай бұрын
I love the dewalt gyro screwdriver. I am SO happy with it
@TinkerWithTools
@TinkerWithTools Ай бұрын
it's been great to use!
@bobbyg4100
@bobbyg4100 24 күн бұрын
I’m a Mobile Repairman and Installer of Commercial Equipment with my own business for over 36 years. That Gyroscopic Dewalt Cordless Screwdriver is absolutely Amazing. You can even hard Crank on a screw if you take your hand off the trigger and it’s a solid driver. Having the Clutch and it folds in half is fantastic. I’m almost 2-years with it and you are Spot on. Right On Dude you’ve got great recommendations. God Bless 🙏
@TinkerWithTools
@TinkerWithTools 22 күн бұрын
Thanks!
@86Sando
@86Sando Ай бұрын
Knipex pliers wrench is a tool that makes my job and DIY so much easier. Also there’s some good gift ideas here for tradespeople and DIYers. 😉
@TinkerWithTools
@TinkerWithTools Ай бұрын
It is definitely a great tool. And you are right about the gift ideas!
@emmettturner9452
@emmettturner9452 Ай бұрын
LOL! A few days before you uploaded this got that DeWALT DCF682 gyro screwdriver on clearance at Lowe’s on my twin brother’s credit and this will help me justify it.
@TinkerWithTools
@TinkerWithTools Ай бұрын
What was the clearance price? They haven’t carried that in store in my Lowe’s for more than a year now. I always balked at the price and then when I finally got it I was mad I didn’t buy it sooner.
@emmettturner9452
@emmettturner9452 Ай бұрын
It wasn’t the deepest clearance ever but I tried to look it up on Brick Seek and realized you couldn’t even search Lowe’s inventory for it anymore. I asked the store (Newnan, GA) to check their system for more and they said it was the last one. YT always deletes comments with a dollar sign so: 62 and a half bucks, so almost 30 off.
@TinkerWithTools
@TinkerWithTools Ай бұрын
Nice find. Hope you end up liking it!
@emmettturner9452
@emmettturner9452 Ай бұрын
LOL! It looks like YT ghosted my reply even though I left the forbidden symbol out and you hearted it. I can see both of your replies but the only way to see mine is tapping the Hearted notification. Oh well! I tried. :)
@TinkerWithTools
@TinkerWithTools Ай бұрын
Strange - on my admin side it's still showing up.
@OnusBones
@OnusBones Ай бұрын
Nice list. I have a few of those, sometimes exactly as specified, sometimes an alternate version; I'm going to add the tweezers. The tool I grab most often is going to be a flashlight. I've collected them since I was a kid (now retired), and have some favorites. My current EDC is the Boruit V20. It replaces a Sofirn SC21 Pro on the merits of its area light function. My favorite toolbag flashlight is the Sofirn IF24 Pro or IF23; the former has an easier interface, and the latter has a bigger battery.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I typically will have a flashlight in my tool bags (right now using the Wuben E7 for both bags) and then if I need more light I turn to the newest Milwaukee task light as it provide more light but is still decently compact. As for EDC, i just haven't found the light that I love enough to make this list... but i'll typically either have an Olight I5R/I5T or occasionally something a little bigger.
@brickhammerSS
@brickhammerSS Ай бұрын
Nice picks. Cant go wrong with Stabila. My Stabila masonry levels have lasted me years. Love em!
@TinkerWithTools
@TinkerWithTools Ай бұрын
They make some really solid stuff. I haven’t splurged for a larger set of levels yet but I will some day.
@JMc.D
@JMc.D 24 күн бұрын
I would encourage people to watch project farms review on electric screwdrivers. The amazon basics beat all the big name brands and it’s 20 bucks, usb rechargeable.
@TinkerWithTools
@TinkerWithTools 22 күн бұрын
It's on my list of screwdrivers to pick up when I do an electric screwdriver comparison at some point. For now I'm happy with dewalt even though the Amazon basics seems to be an incredible value.
@moldyzucchinis3251
@moldyzucchinis3251 Ай бұрын
I also have the makita 172D impact and the dust blower from japan. Absolutely love them and use both every day. Also, +1 on the crescent wiss tradesmen shears and the dewalt gyro driver. Excellent stuff
@TinkerWithTools
@TinkerWithTools Ай бұрын
I have the American version of the TD172 and love it as well. Just couldn't single out a single impact driver enough to make this list.
@orlovszki
@orlovszki Ай бұрын
I stopped lamenting about my wife shopping clothes and shoes when I started to watch your channel, Morgans' Last best tools and the rest. Now awaiting to sell my kidney, to upgrade my workshop
@TinkerWithTools
@TinkerWithTools Ай бұрын
I sometimes sing Johnny Cash’s “One Piece at a Time” when I feel like my shop is progressing too slowly. I watch all those channels too and sometimes I regret watching when they show me a new tool that I just got to have.
@JMc.D
@JMc.D 24 күн бұрын
I know how you feel! I was doing a lot of home maintenance recently and found myself using my worn out old tools and lacking many tools. I’ve treated myself to the veto pro pack tech xl which came with a smaller bag. Then bought a selection of Wera drivers, Knipex tools and estwing hammer and pry bars. This is my base kit and I’m going to add to it every pay day until I’m satisfied. Top quality German or USA made tools to last a lifetime only, no trash allowed.
@KingYang05
@KingYang05 Ай бұрын
The one “tool” I can’t live without is my Olight Arcfeld Pro. I do home inspections and the laser, UV light, and flashlight are used daily. The convenience of having them all on a single flashlight is what really sells it.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I have the arkfeld Pro and it's a pretty awesome light. I initially wondered how much of a gimmick it would be but honestly I find myself using it for the laser point almost more than the flashlight at times.
@duncdunc76
@duncdunc76 Ай бұрын
Nice list TWT! Was suprised to see the Wiss sheers. I have a pair and Love them for lots of stuff especially cutting zip ties. But I figured not too many people choose a pair of HD sheers over plier style cutters for many things. Even though I've found, as im sure you have as well, that they are so versatile.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I just like their versatility of being able to cut something thicker like card board of thicker plastics as well as doing something smaller. In a small toolbag where I normally keep mine, having something versatile like that is key.
@duncdunc76
@duncdunc76 Ай бұрын
@TinkerWithTools Totally agree.
@ericnichols9275
@ericnichols9275 Ай бұрын
LOVE MY 805 IT'S GOT THE Right AMOUNT Of Power
@TinkerWithTools
@TinkerWithTools Ай бұрын
It’s a great combination of power and size.
@maximflor
@maximflor Ай бұрын
Great tool that I would recommend is the Engineer Heavy Duty Multi-function combi Gripping Pliers/Screw Extractors ( It's the same as Vampliers ). Works great, and there are various types. I have the pz-59 and it's better than any screw extractor made for a driver.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I have the smaller PZ-58 and they work well but they are a bit more singular in purpose I feel like than the twin grip. I might have to try the larger 59 now as well.
@miguelangelgonzalezalvizo5268
@miguelangelgonzalezalvizo5268 Ай бұрын
The largo One its a klein tools version of the pliers wrench, how is one compared to the other?
@TinkerWithTools
@TinkerWithTools Ай бұрын
So far I have been impressed with the Klein. It’s not as refined as the KNIPEX in my opinion but for half the cost it’s definitely not half as good. It’s a solid budget option.
@amitche525
@amitche525 Ай бұрын
I’ve noticed in most of your videos that you like using the blue wiha bits with your drills and impacts. Any chance you could tell us a little about why you prefer those over the many other options out there?
@TinkerWithTools
@TinkerWithTools Ай бұрын
Great question! I have tried most of the brands of bits that are readily available at the hardware store and while there are others that are satisfactory for me, the wiha bits have risen above the top for the following reasons 1) I've never broken a bit. I had one T30 bit get rounded over a bit and get replaced but it was still functional, just not as good as original. 2) The fit of the bit into the fasterners, whether it's a torx, square drive, phillips etc... they all just seem to fit a little bit better. That comes into play more in day to day use and not as much in testing. 3) when it comes to price, they aren't super cheap compared to others, but they aren't too expensive either. If you can keep an eye on lowe's clearance deals in store, you can usually get multi packs at a decent price. 4) the last reason is dumb but true. If you use a dewalt bit in a Milwaukee impact on camera - someone is sure to point it out. Wiha doesn't make power tools, so having an "agnostic" bit if you will, just makes it so you don't deal with those comments. 5) I should also point out that while I do have a set of Wiha nut drivers, they are a bit pricy and longer than I prefer, so you will typically see me using either Dewalt or Milwaukee nut drivers. If I weren't running Wiha, the other bits I prefer are the Makita XPS, Dewalt Flextorq (the black dewalt bits, not the grey color) and the Milwaukee silver bits aren't terrible either. I've tried stuff from Ryobi, Bosch, other dewalt, other makita, Flex but the other ones i have mentioned take the top spots for me.
@amitche525
@amitche525 26 күн бұрын
@@TinkerWithTools thanks for the info and keep up the good work. Love this channel!
@TinkerWithTools
@TinkerWithTools 26 күн бұрын
Thank you!
@dreambuilt-l9294
@dreambuilt-l9294 Ай бұрын
Great vid and I completely agree with you on the dcf682. (Dewalt gyroscopic screwdriver) the thing is amazing!! The new one seem lame in comparison considering it doesn't have the gyroscopic technology. I guess I have to cough up another million bucks to find out. Better yet how about you buy the new one and do a review!!??🎉🎉
@soundslight7754
@soundslight7754 Ай бұрын
Interesting bunch of tools, I'd have expected to see a claw hammer here for some reason :)
@TinkerWithTools
@TinkerWithTools Ай бұрын
Hammer is a necessary tool for sure and one I COULDN’T live without but it just didn’t rise quite to this level of love. I considered my titanium head stiletto framing hammer but it’s a bigger hammer so I don’t grab it for everything. If I ever buy a stiletto or Martinez trim hammer you might see it end up on a list like this.
@soundslight7754
@soundslight7754 Ай бұрын
@@TinkerWithTools Christmas is around the corner, let's see if Father Christmas is kind to you this year 👍🙏
@rnuovz71
@rnuovz71 Ай бұрын
If you have used the Leatherman ARC. You are missing out, hands down the best multi tool I own. Speaking of, I’ll add context. I own the Leatherman Rebar, Crunch(another multi tool I can’t live without) Wave+, Surge, and ARC. I also own 3 Gerber Multi Tools, two of the suspension, and one NXT. All off which are cheap multi tools that I would not recommend to anyone. And also have the Dewalt multi tool, it’s definitely the cheapest and most worthless one I own. So believe me the ARC is worth every single penny.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I bought the wave+ initially and loved it. Had a lot that I liked about it but then the Free P4 came on sale for $100 on prime day. Picked it up and was amazed at how much more I liked it. Sure I gave up the bit holder and the precision screwdriver but the placement of many of the tools on the outside where they are easily accessible more than made up for it. I will one day own the arc and I am sure when I do I’ll feel the same way. I just have gotten over the $130 premium I would pay over the two that I own.
@rnuovz71
@rnuovz71 Ай бұрын
The extra cost is definitely a down side but, it makes up for it especially if you use it daily like I do.
@duncdunc76
@duncdunc76 Ай бұрын
I'm a fan of the OX carbon pencil that is now easily accessible at Lowes.But most of the brands are great and way ahead of the old pencil imo. Can't remember if you've done a pencil comparison but if not that might be a fun vid for ya. And imo the more exposure these types of carpenter pencils get the better. I can't believe how much I love mine compared to the old sharpening, lead breaking, pencil losing, routine of the original carpenters pencil. I'm sure the old pencil still has its place as im not lending my OX out to anyone on a jobsite. But man, the new age of the mechanical carpenters pencil with the thin shaft and built in sharpener in its holster is pretty awesome imo.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I agree with you! I have the ox and like it too - the ox was readily available at my Lowes at a time when Pica was harder to get online but not it's disappeared from shelves there. I have also tried a few other brands off amazon too and really like most of them. As for a comparison - I have considered it but just haven't gotten to it yet. Might have to put something together.
@chucknorris2952
@chucknorris2952 Ай бұрын
Hultafors 2 meter foldable measure. Cant live without
@TinkerWithTools
@TinkerWithTools Ай бұрын
Just curious what sort of work do you do with it. I know what they are - I have just never thought to use one over a tape measure.
@chucknorris2952
@chucknorris2952 Ай бұрын
@TinkerWithTools general carpenter, sheet metal worker. The tool has a few advantages over the measure tape. 90 degree angle built in, more pocket friendly, can draw straight lines along it. (which i do all the time, both for wood and in particular metal). Its more precise than a measure tape. I have the same pica as you also, but i can live without it. The hultafors, no.
@TinkerWithTools
@TinkerWithTools Ай бұрын
I appreciate you sharing!
@realJohnJohn
@realJohnJohn 14 күн бұрын
Q: why not m12 drill?
@TinkerWithTools
@TinkerWithTools 13 күн бұрын
I love the thing but it didn’t make the list, especially considering my well documented love for the DCD800!
@realJohnJohn
@realJohnJohn 13 күн бұрын
@@TinkerWithTools lol I have m12 but but something is missing after your video I really want the dcd800
@garryparkes9121
@garryparkes9121 Ай бұрын
I HATE the Dewalt Screwdriver with a vengance. Hate it, Hate it, Hate It. I am a Medical Tech and I use electrical screwdrivers a lot. My Choose is the Bosch Go. It has push to start, much better in my opinion.
@TinkerWithTools
@TinkerWithTools Ай бұрын
It is definitely a matter of preference. I can't stand the Bosch or the Dremel version which is basically the same thing.
My Top 10 Glad I "Bought'em" Tools in 2024  #tools #maintenance #top10 #list
22:31
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
SHHH!!!! - It's a QUIET Impact Showdown!
17:36
Tinker With Tools
Рет қаралды 6 М.
10 Useful Tools You Never Knew About
15:29
izzy swan
Рет қаралды 491 М.
Why We Build Houses with Nails, Not Screws
17:05
Essential Craftsman
Рет қаралды 1 МЛН
Turbo Fan Dusters are getting out of hand
14:08
Torque Test Channel
Рет қаралды 1,8 МЛН
Tools I WISH I Never Bought And Tools YOU Should Buy In 2025!!
21:41
SOTA Electrical
Рет қаралды 42 М.
5 Tips To Get The Most From Your Opinel Knife
20:43
The Workbench
Рет қаралды 151 М.
Tools I wish I bought years ago: My toolkit v2
18:05
Todd Parker
Рет қаралды 1 МЛН
10 Tools That Will HUGELY Benefit Your WORKSHOP
20:22
Start Making (Woodworking)
Рет қаралды 107 М.
Tinkerer's Tool Bag
21:58
Tailgate Tinkerer
Рет қаралды 21 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН