Tools I wish I bought years ago: My toolkit v2

[@todd.parker]

If you want to buy any of these products, here are Amazon links to everything. Spreadsheet with prices and product links: docs.google.com/spreadsheets/d/1mp6Q_0hGRRxBELU9xtTTuR1y9ttMJ3RocC4SI3ZczGs/edit?usp=sharing ---------------------------------------- - - - - - Every product mentioned in the video, in order of appearance (affiliate links) Veto Pro Pac TP-LC toolbag - $135 amzn.to/3jgZD6k Wera Kraftform Kompakt racheting screwdriver - $70, $40 sale amzn.to/3FAXRob Wera Tool Check Plus, metric - $73, $60 sale amzn.to/3uZBcwY Wera Tool Check Plus, imperial - $73, $60 sale amzn.to/47FBMBj Wera hex key set, metric - $55, $35 sale amzn.to/3PCFLGV Wera Zyklop 1/4” rachet - $100, $62 sale amzn.to/3G7ssdH Wera Zyklop 1/4 rachet kit with bits & sockets (replaces ToolCheck Plus) - $110 sale amzn.to/3sFMwAP Wera 3/8” socket set, metric - $110 amzn.to/3QOAFbG PB Swiss ratcheting stubby - $80 amzn.to/3R8Km6p Wiha 5 pieces insulated screwdrivers - $36 amzn.to/3SJ9UIp Klein 14-in-1 precision screwdriver - $22, 15 sale amzn.to/49X0fnV Dremel electric screwdriver - $50, 30 sale amzn.to/3hBboUM Milwaukee Surge 12v kit - $180, $130 sale amzn.to/3SYAmxO Milwaukee 2 7/8” extender - $9 amzn.to/46EtwRl Milwaukee 6” extender - $14 amzn.to/3uDKZvO Klein Tools 7-in-1 Impact Flip Socket Set - $20 amzn.to/3R4ousK Milwaukee M12 bit holder - $20 amzn.to/3SOI8Kp Milwaukee Shockwave Impact Titanium Drill Bit Set 23Pc - $35 amzn.to/47hJguw Milwaukee Shockwave Impact Duty Bit Set 40-Piece - $25 amzn.to/49GtWJE Neiko 02432A 3/8” Drive SAE and Metric Impact Socket Set - $26 amzn.to/3R1eijv Dewalt Impact Socket Adapter 1/4” to 3/8” - $6 amzn.to/412d4cc Klein Tools Electrician Scissors - $17, $13 sale amzn.to/47mlKMT Knipex 6 1/4-Inch Diagonal Cutters - $25, $18 sale amzn.to/3FFE72G Milwaukee Fastback Utility Knife - $15 amzn.to/3FEqcu0 Knipex 6.5” Needle Nose Pliers - $42, $22 sale amzn.to/3HLaG2e Knipex TwinGrip 8” Pliers - $52, $34 sale amzn.to/49KIuIk Knipex 10” Pliers Wrench - $62, $40 sale amzn.to/3FzG5Sh Knipex 10” Cobra Water Pump Pliers - $58, $30 sale amzn.to/3BJwkjc Estwing 9" Pry Bar - $16 amzn.to/3Ipv4VT Estwing 12 ounce hammer, 11” - $38 amzn.to/3sJt06D Workpro 6.5” Torpedo Level - $15 amzn.to/3SO2G63 Dewalt 16' Atomic measuring tape - $15 amzn.to/49Blc7s Mileseey laser measuring tape - $35, $28 sale amzn.to/3SMICRi Zircon StudSensor Pro - $35 amzn.to/3upyYdp Libraton Small File Set - $17 ($2ea) amzn.to/3MSvHJM Toolan 8-In-1 Multi Blade Hand Saw - $19 amzn.to/40K0dvk Dewalt reciprocating saw blades, 6 pack - $12 ($2ea) amzn.to/47juXpu Dewalt T-Shank Jigsaw Blades, 14 pack - $20 ($2ea) amzn.to/40PdKlo Lenox 10” hacksaw blades, 2 pack - $8 (4ea) amzn.to/46GGJJc Nicholson 4 in hand rasp and file - $11 amzn.to/3N5ATKA 3M assorted sandpaper - $2 amzn.to/413LZW0 Gorilla Mini Duct Tape, 2 pack - $6 ($3ea) a.co/d/15htxIb Black Sharpie, 2 pack - $4 ($2ea) amzn.to/3MQplus Silver Sharpie, 2 pack - $4 ($2ea) amzn.to/46lcMyf Brass Center Punch, 2 pack - $10 ($5ea) amzn.to/40PdEu2 Magnetic Telescope Tool - $6 amzn.to/3sJtOZd White Gaffer tape, 4 pack - $20 ($5ea) amzn.to/3G8GQT8 Black Gaffer tape, 4 pack - $20 ($5ea) amzn.to/3GdKOtv Electrical tape, 3 pack - $7 ($3.33ea) amzn.to/3MQ7ZxW Gorilla double sided tape - $9 amzn.to/3R5sfOt Gorilla mini duct tape - $12 ($5ea) amzn.to/3sJflMY Teflon Plumbers Tape, 4 pack - $7 amzn.to/3uq89Ww Black Diamond Headlamp amzn.to/3T5ljCm Flashlight set amzn.to/3N9oipJ - Electrical upgrades Klein Tools Dual Wire Stripper - $20 amzn.to/3uoLppX UNI-T UT210e Mini Digital Clamp Meter - $62 amzn.to/46hveYJ Cable clips for multimeter leads - $8 amzn.to/3RnXW5L Fluke 2AC Alert Voltage Tester - $38 amzn.to/3upvAiH Klein Tools NCVT1P Voltage Tester - $20 amzn.to/3ug36rq Knipex 9.5-Inch Lineman's Pliers - $43 amzn.to/3R8PKXb - Wrench upgrades GEARWRENCH QuadBox Wrenches (S + L size) - $65 amzn.to/3PJuXHc GEARWRENCH QuadBox Wrench (M size) - $47 amzn.to/3hM78SC

[@edwardwilliams9185]

I wanted one of those Toolan hand saws, but it is £40 on Amazon UK. Wild!

[@todd.parker]

Somebody said they were $120 in Germany so that's a steal! I'd say that is worth $20-25 max, it's neat but not worth paying much for.

[@edwardwilliams9185]

@@todd.parker $120, madness! Does it have a manufacturer's stamp on it anywhere? I'd love to get in on Amazon cheaper but can't find the original manufacturer.

[@renesalinas9491]

I Ordered a Velocity Pro Gear Rough 2.0 Bag from UK to germany and payed 60€ on Taxes and toll @@edwardwilliams9185

[@asoma64]

Might be a weird request but could you post pics or videos on how you organized it

[@meymoto4810]

For plumbing, clip on a small collapsible silicone dog bowl. You’d be amazed at how often it comes in handy. Not just for dripping residual water when doing plumbing work, but as a quick catch all for bolts, screws, fasteners, etc.

[@TheKajunkat]

The little collapsible magnetic bowls from craftsman work well for that too and they have magnets to hold it in place and help control fasteners.

[@johnlocke_1]

That's genius. Great tip!

[@stringlarson1247]

@@TheKajunkat I have a magnetic Craftsman(?) dish for holding parts on the bench. I didn't know there was a collapsable.

[@eastonwilliams1722]

@@TheKajunkati feel like that would get annoying to clean

[@stringlarson1247]

@@Bobo-ox7fj ha. Many of my things are/were.

[@caseyhoke2362]

Another great product is the forged wire strippers. They are awesome and I think for many home jobs they could replace linesman pliers as well as wire strippers.

[@maxillariadendrobulum4079]

I’m in the process of building a home/hobbyist tool kit from scratch, and this was super helpful for and inspiring! I really appreciate all the time you put into making this. ❤

[@todd.parker]

Thank you so much for your generosity, glad you liked the video

[@camerontechstuffs]

I like keeping a few different colored paint markers along with my sharpie. If you are taking something apart and need to mark certain parts that need to match back up with each other, color coding makes for very quick reassembly.

[@ACoustaDC]

That's a good idea... If you only have one color.. then use a different number of hash markings.. 1 to 1... the 2 to 2... etc.

[@saeklin]

Don't forget yer 5 gallon blue or orange bucket (with lid of course!). It's a tote, mixing drum, seat, trashcan, ice chest, whatever you need it to be.

[@booneatbulls4103]

If you work outdoors it’s also a toilet

[@taylorcoleman8097]

stool as well

[@powerplayer75]

Hat

[@suntzu6122]

Literal drum.

[@TheRealMrLaserCutter]

Bloody love a bucket

[@mattd.8775]

I'm a CNC machinist by trade and those Knipex parallel pliers are the best pliers to ever grace this earth.

[@johnrhodes3350]

Just for use around the home they are my favourite. Closely followed by Vessel megadora 980 impacta JIS Japanese Industrial Standard screwdriver

[@TommiHonkonen]

I CNC for money at work too

[@Volkbrecht]

At my workplace these are the most stolen item. Been at my company for over ten years, there was no year where I didn't have to replace at least two. Don't know who keeps nicking them, with the amount gone missing in every team over the years everyone should have at least two at home...

[@stringlarson1247]

Right? I've picked up the 5" parallel and 7" cobra to check them out. I love the parallel design. Definitely going to get the bigger version soon.

[@_B_K_]

100% agree. I discovered their existence a few weeks ago, got a couple of sizes and have been using them non-stop. They're incredible.

[@CarstenWolfram]

European IT/Electricity guy here. That's an excellent compilation of tools. I'm using many of these myself and can absolutely confirm they're worth it.

[@Drewpost19]

After 25 years collecting and working with tools I can say your right on. I have about 80% of these you’ve shown. You pretty much have the best version of every tool you have.

[@jbones2121]

Amazing that it’s only 17lbs. At least a few times a week I need a tool for something around the house. And I’m thankful that I can just go to my toolbox or bag and grab exactly what I need for the job at hand. Nothing beats that feeling of repairing or installing something and having exactly the tools you need at hand. Quick and easy and on to something else!

[@damienbates]

A great set of tools. Have to say that I outfitted my older boy with a new quality tool for each birthday and Christmas. Now that he’s a young adult living on his own, he seriously appreciates them. I’m sure at the time he would have preferred a new video game but I just kept on preparing him for adulthood. He’s the go to guy for all his friends who appreciate his tools. It also means I don’t have to “loan out” my nice tools because he has his own. 😁

[@todd.parker]

I’ve been starting to do the same thing and that was one of the inspirations for this video. If you wanted to start building a kit, where is the best place to start?

[@damienbates]

The basics are always great but for my son I started with a nice precision bit set. We built his first computer together and he clearly liked the one we used. So I got him a nice set as a stocking stuffer. From there I added tools we used to fix his electric scooter, then his first car and now his first rental house.

[@SusiesRepeat]

I can’t wait for my grand son to be able to use tools. Knipex and Wera here we come.

[@MathewPollard-vj4uq]

@@todd.parker Start with a nice mid-size tool box so he has place to store his tools separate from yours.

[@jjsifo1]

When I turned 7 my dad's birthday gift was a can of Havoline motor oil , an oiler two screwdrivers (phillips, blade)hammer a buunch of nails ,a small saw and some pieces of wood. My first experience was sticking the blade screw driver into the hot end of a wall outlet ,that day i became an electrician. Later in my life I became an auto mechanic then an avionics ( aviation electronics) technician, then became a law enforcement Pilot. Airplane and Helicopter. It was fun, I'm 71 yo and have a tool addiction.

[@wongster3000]

For stud finder, I've had my Franklin Sensor for years. Reliable, quick to start up (doesn't require a calibration at every start up unlike other sensors) - and has lights to show the width of the stud. I've always found other stud finders just inferior, or just non-functional.

[@meymoto4810]

I came here to call out the same. Has a level bubble and works very well. I’ve been through half a dozen different stud finders including more expensive Bosch ones, Franklin is what I reach for and lives in my tote.

[@patrickweckermann9121]

Bonus points the newer M210 has higher resolution and a the live wire sensor compared to the 710. Worth every penny. No experience with plaster however.....

[@dsgamecube]

@@patrickweckermann9121 I have the M210. Do beware that it does *not* work with 1.2V NiMH rechargeable batteries or Lithium disposables, but it *does* work with Alkaline disposables and Li-Ion rechargeables. Otherwise, it's quite good.

[@millibarman]

Love my Franklin too, but ALL stud finders are nearly useless on plaster walls with lath boards. Magnets help, but it’s still a pain.

[@MaraxYTube]

@@dsgamecubewhere to buy one in europe?

[@ozzmann3217]

I’m a heavy equipment tech have all the tools for that but trying to build out my home garage kit and my home grab and go home jobber kit for when people need help.. I have this same bag but I haven’t perfected mine like this .. sadly I usually grab stuff from work kits to fulfill home obligations and or from my home box for mechanical work and I am attempting to smooth my kit out to do almost all home improvement jobs without robbing from my other assortment of kits this has been very helpful I’m a sucker for quality tools and something like this is Perfect so I appreciate all the work you put into this

[@todd.parker]

Thanks so much. This kind of kit seems perfect for you. I like knowing I can grab it and probably be able to cover most things I run into

[@sauceless6666]

Milwaukee are not quality tools period, zero repairability and a bunch of corners cut in their manufacturing.

[@TheDunnjo57]

I truly appreciate you taking the time to make this video. I’ve always wanted to come up with my own version of something similar, but never took the time to do it, but I will now! Thanks! Great video.

[@AmandaWoolsey]

I’m usually just here for EDC and camp stuffs, but thought I may find hubby something. Too cute that you kept up the Knipex

[@brentott6225]

Nice set up! You definitely have a wide variety of tools that actually fit into a fairly small package. Well done!

[@todd.parker]

Thanks, glad it was useful!

[@timkrouse345]

...and clearly doesn't use any of them 😆. j/k - I try to keep my tools spotless as well (at least most of them) 👍

[@hovig]

Todd!! Ive been clean for two weeks but watching your video made me relapse. I tried repeating to my self over and over that i didnt need it but i caved and bought more tools, thanks alot Todd! jk great impovements to the last setup. My next puchase will be a knipex pliers wrench or toolcheck plus depending on which ever goes on sale first.

[@SusiesRepeat]

Tools addicts of the world unite.

[@billsmith8339]

I got tired of using a bucket for all my tools, so I searched for "tool kits" and came across your original and this V2 video. I was impressed with your video so much that I went all in! A guy can't have too many tools, so I got just about everything except the meter and measuring items (but of course I had to have the Milwaukee driver!) and it ran about $1115 including taxes. I did get both SAE and metric Wera sets so that added a bit ... The next few days will be like Christmas ;-) Thanks for all your efforts to put a video like this together!

[@todd.parker]

Wow, that will be an amazing Amazon delivery!

[@xferme]

Absolutely agree with most of the points and I would like to emphasize the point about picking up quality tools. Don’t skimp on the important stuff that you use most often. However, It’s okay to pick up a cheap item if you know you will use it a couple times at best.

[@lmlm2500]

Exactly what I do. My pro tool box is high equality. But when I'm out visiting family abroad, I can't exactly ship my tools. So I scavenge around pawn shops or cheap tools for a particular job. I usually end up leaving the cheap tool with them so they have something instead of nothing.

[@MrDochorrible]

Dang this is such a great video. Saves me a ton of time trawling forums, reddit, and other videos honestly. Plus every time you used the "knipex" voiceover I laughed out loud

[@FowlerAskew]

Totally with you on the meter, the 210E is incredible in that there's basically nothing else like it on the market. It's super small and does clamp measurements on DC with like a 10mA range. If anyone out there is like me and primarily uses their meter for DC, you can reprogram the meter to default to DC mode, and change a bunch of other settings like sleep time and backlight

[@todd.parker]

Wait you can set this to default to DC!?

[@blueclaymations]

@@todd.parker Also it contains a non-contact voltage mode (the upper setting of the dial)

[@vicpetrishak7705]

Friends laugh at me , my tool storage is a six gallon bucket with a lid , also used as a stool . Full small and large Toyo tool boxes placed within . Vessel has quality and affordable tools . Very Clear and Concise

[@eyesofthelaw]

this is such a genius idea

[@mzungu_man6363]

Buddy of mine uses that same method too. I don’t laugh at him, instead im swearing as we walk up 8 floors of a commercial job to the roof and my back is killing me and he’s fine with his bucket. Me with my ~$300 Veto Pro bag and him with his $6 HD bucket 😭💀

[@vicpetrishak7705]

A friend of mine questioned me about the 6 gallon bucket , wine grapes are available in 6 gallon buckets .

[@chrisrobins7]

Make a video of it!

[@ryzingyou3444]

You are amazing, this is my style too! Small, light, organised, and versatile. This video is super satisfying, so much effort on it... Buying the tools, selecting them, organizing, and makings this long video. Thank you!

[@isellchickens]

One of my favorite power tools is the Milwaukee Installation Driver. It has attachments for right angle and offset and it’s taken over my Surge Impact in use. Great video and I’ll be adding some of your suggestions to my kit soon!

[@robert.j.forrest]

This is almost definitely the MOST VALUABLE video for a new (or newly organized) DIYer I've ever seen. AMAZING WORK

[@adamboyle193]

For a stud finder I use a pack of neodymium magnets, as I use them to stick to the drywall screw/nail heads, it also means you don't have to mark the walls with a pencil.

[@MathewPollard-vj4uq]

I always go to the magnets first - Stud finder sits in the tool box.

[@pauldaufen309]

Thank you so much for doing these videos. They are enjoyable to watch and get me in front of new tools I didn’t know I needed. I’m excited to continue to perfect my kit, and build one out for my son.

[@bryanweaver53]

I use a StudBuddy stud finder. It's essentially just a really strong magnet that finds screw/nail heads. It works great on drywall. You mentioned plaster though, don't know how well it would work there.. It's pretty small though, might be worth throwing in the bag anyway.

[@CamTracey]

Yeah, I was trying to remember what is called. I have a rare earth magnet in my kit that finds the screws holding on the gyprock. You just need to find 1, & measure out from there

[@genemack4470]

Way better than electronic ones

[@byhammerandhand]

I did on-site furniture repair for a bit over 20 years and evolved into my "every day carry" tool tote. I did work on wood furniture, upholstery, and manual and power recliners. I was shocked to see an almost 90% overlap in my tool kit with yours. I will have to say I used different brands (that were quality, but generally less expensive). I do have a magnetic dish, a pick up tool for grabbing those little parts, a few chisels, block plane, and a small combo square.

[@midiyr]

This is an incredible video. I have always been intimidated by buying quality (but pricey) tools, so I always resorted to purchasing the cheapest Husky set I found on the shelf. I have a 40-pound tool bag stuffed with tools and sets I NEVER use! This guide has been incredibly insightful, and I'm super excited to upgrade my EDC Toolkit with some of your tool recommendations. Thank You!

[@todd.parker]

Thanks! You know, that’s exactly why I started making these tool videos. I kept buying random tools and kits I didn’t need from big box stores and wanted to boil it down to just the stuff I need as an average guy who doesn’t work on cars (wrenches and a million sockets look cool but aren’t needed). Turns out, you don’t need that much so you can invest in better stuff where it matters.

[@lmlm2500]

Buy a particular tool when you need it. Saves buying big 'deal' boxes. I must admit, I'm a sucker for a deal.

[@christopherllamas5706]

Todd this is a huge upgrade from your previous setup! Love that you replaced the Dremel and added the surge impact driver. The only things I will change(in my opinion and my needs) are: Getting rid of that stud finder and getting a Franklin stud finder instead. Hands down, they are the best electronic stud finders. Or you can use a magnetic stud finder. I have both in my Packout tote. Remove the pliers wrench and add a 6" and 8" crescent wrench(adjustable wrench) instead. I noticed that in most home repairs and upgrades, you need two wrenches to do most projects and they need to be compact. Although the 10" pliers wrench are neat, they are too big if you need to be in tight spaces. If you do need to remove a bigger nut, your water pump pliers can do that as well. Lastly, remove the Wera tool check plus and add the Wiha 32-piece ratchet impact-rated bit kit and Makita impact-rated metric/imperial sockets. They are compact and you can use them with your surge; the Wiha kit has a small ratchet so you can access tight spaces, no need for a stubby. These are just suggestions and my opinion but I hope they help!

[@todd.parker]

Greats advice, thanks. I’m working on a video fur alternatives to the toolcheck plus and ended up Wiha bits and Marita sockets. Posting that tomorrow!

[@christopherllamas5706]

@@todd.parker sweet! Happy New Year Todd!

[@ek8652]

I’ve had the Franklin stud finder. Thought it was a better design compared to every other one made. I was wrong. It was junk and performed poorly so back it went. As for the wrenches I’d keep the 10” knifed and add a knioex 5” cobra and 6” plier wrench. I’d also keep the Tool check. I removed the duplicate bits and added some imperial bits that the metric didn’t have to make it more complete. I might add some 1/4 drive were sockets or equivalent to my kit as well. If I need anything more substantial I’ll go for my USA made craftsman kit that has 1/4-3/8-1/2 tools. I have a nice dewalt impact with a compact impact bit set so I just might end up going with one of those Dremel screwdrivers for my version of your small kit.

[@christopherllamas5706]

@@ek8652 oh wow. Franklin stud finders are the best electronic stud finders that I ever used. Were you using it on plaster wall? Or maybe it was defective? The small Knipex cobras are nice though. I guess you can use those instead of adjustable wrenches. A little pricier though.

[@ek8652]

@@christopherllamas5706 from what I’ve seen they are supposed to be good but I found they were no different than all the Zircon stud finders I’ve used in the past 20 years. Constant false readings had me drilling multiple hole to find a secure stud to mount my over the range microwave. I really thought The Franklins were gonna be different.

[@jsavage22]

I recommend klein's stubby, im an electrician and I never leave home without it in my pocket. The best feature is that it extends and almost feels like a regular sized screwdriver.... also, ill go ahead and say it. Wera is the $hit :).

[@asoma64]

Which specific stubby do you have

[@vp9234]

Just bought my first home and building out my toolkit ... this is literally what i was looking for. Awesome job and definitely will be taking a lot of inspiration if not directly purchasing the tools you bought here.

[@todd.parker]

Awesome! Thank you!

[@veoquenoesunproblema]

Finally not a Milwaukee fandom video. Thank you!

[@ethan5205]

Very refreshing to only see Milwaukee tools that are their actual best tools instead of just everything Milwaukee, and that’s coming from a guy with only Milwaukee and craftsman in my truck lol

[@frozen-curmudgeon]

@@ethan5205 I still would have kept the dremel from the last vid, just for size and portability. Plus the Klein multi head precision screwdriver seems alot bulkier.

[@ryanwhite5482]

The twin grips are the underrated add here. Since adding them to my tool bag, they've been my first choice when tackling almost anything pliers related.

[@TrainFlood]

"what I use every day" Tbh it really doesn't look like most of these have been used more than a a dozen times (besides the hammer). Kudos for keeping your tools clean. No idea how you do that.

[@nullgator8073]

Imo a job isn't done until the tools are cleaned too. One thing missing from this kit is something for cleaning like iso alcohol or a degreaser as well as gloves and rags.

[@Issicilies]

This is an awesome tool kit! I think the M12 driver was your best upgrade from the last setup. Been using impacts in different trades for years and the little M12 is so versatile with the locking extension. I have the smaller veto bag and the tape measure clip works well to hold the impact so you don't have to carry it around. I made a paracord lanyard to attach the tape measure on the side of the bag

[@todd.parker]

Thanks for the tips!

[@fezwhy]

This is a great setup! I plan on making something similar for myself as well. Having a bag you can grab with your most used tools is not only handy but a huge time saver.

[@todd.parker]

Exactly, I like knowing I have what I need when I grab this bag and know everything is organized. You’ll like having this kind of setup.

[@SilentEarthMovers]

Yes! I almost returned a Milwaukee cobalt drill bit set before even trying it out, because the case is so bad. Terrible labeling. Painful to get the bits in and out. But then I finally tried one of the bits, and it's so good. Swapping them out into an old case makes so much sense!

[@todd.parker]

Yeah, dunno why I hadn’t thought of it earlier. I always had a drill case, bit case, and neither was right. Just pick a good case and load it up yourself

[@MG-bv1vl]

Thank you, for taking the time and putting together the spreadsheet with the all the links and prices!

[@todd.parker]

You bet!

[@StoneyAtwood]

I know plenty of companies have changed their handles but I swear the comfortability and shape of knipex channel locks make them so nice to use and can squeeze tight if needed with ease.. just a feature I never see people mention.

[@inxile88]

Just a heads up you meter has a built in non contact voltage setting, "ncv" I love that meter for when im servicing A/C systems. Not my main meter, but a handy dependable meter for its size

[@JustDIYstuff]

Milwaukee M12 surge impact driver is a must-have for anyone who uses an impact a lot! It is so much quieter than a standard impact. Would also recommend the M12 installation driver.

[@todd.parker]

Yeah those are great, the smaller size makes a big difference when you’re in tight spots!

[@rainerborgmann7326]

I agree completely about buying for life, and have many of the same tools you do. However, I think the Adam Savage's advice is best: buy the cheapest version of tool first. When you break it or know you use it all the time, buy a quality version. I can see the argument for buying a few key, expensive things first, but there's still a much less than zero chance some individuals will never use the few you mentioned.

[@todd.parker]

Yeah 100% agree. I’m actually working a starter toolkit video now to talk about the first dozen or so tools you should buy. Some i recommend buying cheap and replacing when they break, others are so much better and commonly used, it’s worth starting with the good stuff.

[@anthonymorris479]

This looks like a great kit. Such an excellent use of the maximum space of the bag.

[@Drpepperspray1010]

Sounds like you haven’t slept in years just to find the perfect tools

[@user-lk8cp1df6z]

Haha I have lost sleep too

[@dillonbascom]

Sleep when you’re dead

[@Oneoneone111One]

@@dillonbascomwoah bro that’s so cool

[@abdallafathy7885]

You should have only enough quality tools with good price not the best quality so you can lost them anywhere or been stolen

[@lastresort1757]

Worth it

[@PhilipBlank]

Not sure if I should be proud or embarrassed that every tool you showed I thought “Hey I already have that exact tool!” lol love the assortment! Item I’d highly recommend tossing in there is the ICON Locking Flex Head Ratchet and Bit Set, 35 Piece - Item 58074. Don’t love that it’s ICON, but it’s made by Facom Tools, absolutely love it, very high quality and I now have 2 sets!

[@VitorMadeira]

Now imagine when you guys discover Parkside Tools from the German Lidl supermarket. You will be able to build that tool bag in a tenth to a fifth of the price! Great video. Thank you and greetings from Portugal.

[@SilentEarthMovers]

Agreed about BIFL. When starting out, and either short on funds, or unsure how much you'll use which tools, I'd complement that philosophy with buying used. So many solid tools with plenty of life to be had at tool swaps, garage sales, etc. And I'll probably never replace my 50+ year old nail setters, center punches, pipe wrench, etc. The designs are classic, and (for the most part) haven't really changed since then. And you can even score some on same great electric tools... my first drill press was a used Delta, before I had any business owning a Delta...

[@todd.parker]

Great call on used tools. 100% agree

[@bpsdetailing8822]

I have many of the same tools as you and agree with your selections. I recommend the Sofirn IF23 flashlight if you can fit a slightly larger flashlight - it is USB C rechargeable and doubles as a battery bank. It has a 4000lm main light and a 1000lm side light that can be used as a work light. Also recommend using a cheap rechargeable headlamp with the LED band on the front and the regular light on the side - the front wide band is great for working on stuff.

[@todd.parker]

Sounds like a nice upgrade, this is a cheap-o flashlight

[@stringlarson1247]

Great kit. The Estwing caught my eye in the thumbnail as I used to play Little League ball across the street from their plant. We could feel the ground bounce from the massive drop forges. I also have a bunch of their tools, many of which are 40+ years old.

[@todd.parker]

Cool story!

[@jayjayhooksch1]

I used to carry a kit like this, it was very enjoyable to kit and build out. However I eventually came to despise it; it was just too heavy. Now I keep a small bag near my tool chests and fill it with the tools I need for whatever specific task I'm going to tackle that day. Then when I'm finished all of the tools get returned to their spots in my chests. It is a bit more time consuming but it beats lugging 60lbs of tools up and down multiple stairs to hang a picture at my mother in law's house.

[@todd.parker]

Yeah, I get so mad when I need to make multiple trips to do a basic task like hanging a photo or unclogging a sink and for that, this is perfect. As part of this, I’ve been whittling down my tools so this isn’t a grab and go kit, it’s now My Tools and just grab extra things like the Surge, jigsaw, 3/8” rackets, or electrical tools for bigger projects so I’ll probably stick with it. That mindset shift changed everything for me but if you’re someone who needs a lot of tools (mechanic, trades) then it’s a different story

[@matthewcorsey4217]

I’m the biggest Milwaukee fan boy ever but there’s something about the Dewalt compact tape measures that I absolutely love! My favorite tapes of all time I got the 16’ and the 30’

[@dmbassett]

I can tell this channel is going to keep my credit card busy… Dammit😜

[@zztopandaragtop]

Really useful video and I like the alternative suggestions. I carry the Veto Pro Pac MCT as a do anything bag and I'm amazed at what I've packed into it. As a day go bag I use the Veto SB LD pouch so I will be applying many of your suggestions to lighten it and increase my functionality. Thank you for a well thought out and presented video

[@paytoncash3285]

Wiha slimline insulated bit set with the pico finish insulated blade holder, and the standard size insulated blade holder is a great pick for compact insulated screwdriver work. Pick up a small leather pouch to keep bits in, load in your regular use bits and it takes up almost no space. The kit i bought was around $230 and I would buy it another 5 times if I had to.

[@xSpaceInvader]

Now I have to start pronouncing "Knife" as Kah-nife.

[@Goranoful]

You mean Kah-niff-eh?

[@retardno002]

Knipex is a German company, they pronounce the 'k'.

[@billj5645]

That's a pretty neat kit. I have all of those tools or equivalents, placed in my toolbox or on my workbench. If I need to go somewhere I grab a tool bag and thrown in what I might need. This takes time and I might miss something, plus tools thrown into a bag are the worst when you are trying to find a specific tool. The beauty of your bag is it's quick to grab and everything has a place so it is easy to find individual tools. I don't think you need to worry too much about buying impact rated sockets and driver bits. A good brand of normal sockets will stand up to that small driver for a long time. My father owned a garage for 60 years and rarely used impact sockets, they are just too thick to fit in many places where you need them. Running 1/2" drive air impacts on high air pressure the good brand of chrome sockets would last a really long time. And the impact rated driver bits are somewhat of a misnomer, they don't really seem to provide any benefit over a good brand of normal bits. If you've ever seen the torque sticks used with air impact tools, someone got the idea to make driver bits that looked like that and market them as impact rated, but they don't work. What you need is an impact rated person operating the tool so they know not to hammer a fastener hard into a material where it will bottom out suddenly.

[@casaMN]

None of these tools look used- lol

[@OliveHugh2]

Ngl if you know the finish of the tools out of the box, you know that these get used a lot

[@gunfightersquid6732]

Do you want a medal or something? Dork

[@Thinkableness]

He actually mentioned that in the video

[@GustyOinker]

I really like the way your videos flow. It’s like watching a friend help you and show you what works and what can help you as well. Keep up the good work.

[@todd.parker]

I appreciate that!

[@bradymckinney1712]

I find it very strange that Knipex doesn't know how to pronounce their own name lol.

[@michaelprovenzano1895]

Vaco, who is owned by Klein, makes an identical flip socket set in metric. The sockets are even interchangeable from the Klein to the Vaco. Great stuff!

[@Jannis368]

Really nice tools, my favorites are the Wera Toolcheck Plus and the Knipex Cobra. The Toolcheck is easily my most used set of Tools, the bits are great and the quality of the mini ratchet is insane. It definitely has been a lifesafer in tight spaces and is awesome for working on your bike. The bite of the cobra pliers is really great, a few weeks ago I wanted to change the pedals on my bike, but they were so stuck that I couldn't remove them with my hex keys. I got my Cobra and even though I was just grabbing a rounded piece of metal, I could easily loosen the pedal.

[@jasonjayalap]

Thank you. Suggestions: The 12v driver can't both be strong enough to break the non-impact wera sockets, yet not strong enough to replace the allen keys (with impact hex bits). Put the driver where the allen keys are! One of two sets of sockets and bits can be ditched or combined (In other words, it might be excessive to have a mini 1/4" ratchet, regular 1/4", 12v driver, regular sockets, regular bits, impact sockets, impact bits). Now everything might fit in the bag (which was supposed to limit you :).

[@todd.parker]

Good call. I bought some of these things before they really tried to reduce things down. Shows I can go further. I do like having an Allen key set for working on bikes and stuff like that though I agree it’s low on the priority list since I can use the bits in the ratchet or screwdriver or Surge. Makes you realize how many redundant tools we all feel compelled to get

[@daktari3055]

You saved me a lot of time wondering what I should get for a Go Tool Bag. Can’t help but feel like MacGyver with this arsenal tools.

[@hap1666]

Good tools are well worth it. I've got some machinist tools that I got from my grandfather the oldest ones being close to 100 years old now. They'll likely go to my granddaughter since she's shown aptitude with the mill and lathe, and with a little care and luck, they'll be good for another hundred years after that.

[@OShackHennessy]

That multimeter punches way above its weight class in function and is very compact I have lots but always end up carrying the 210. Knipex is expensive but worth it, my advice if cost is a concern is to start with the needle nose pliers and one decent size cobra water pump pliers and build from there. The other hand tools can easily be substituted with Husky to start off I still have some Husky stuff riding in my bag for years and have not felt the need to replace them despite my tool buying addiction. As a homeowner you don’t need to spend money on a bag in fact a 5 gallon bucket with the Husky bucket tool liner works amazing. Highly recommend Milwaukee M12 tools for the average Joe they’re light, powerful, and compact.

[@briangrady365]

I have a studbuddy magnetic studfinder. Never failed to find a stud and also handy for knowing where the screws are.

[@daviiaco]

I watch this videos every so often to see what I need but I don’t know I need yet, thanks for putting in all the effort

[@todd.parker]

Glad you found it useful!

[@SykesAJ]

Exceptionally useful video, thanks for putting something so thorough together. The spreadsheet of links is the icing on the cake!

[@todd.parker]

Glad it was helpful!

[@clippy3656]

Great video, bought a Veto pro pac and stuffed it with similar tools. Best purchase in a long time, it’s like driving a Mercedes

[@Soggstermainia]

That short strap for going through your tape stash is an excellent idea! I am gonna go fix the tape problem in my toolbag right now with that idea! I even have a spare strap spare I know I can use! I use Teraoka Seisakusho No.4102 P-Cut Tape alot as its knife free to use, removable and leaves no residue, but strong like fiberglass reinforced tape. I work as a copier technician so my needs are a bit different, but I have a similar style bag/setup of tools. I have the LTT screwdriver and have a Wera 004280 8009 as my socket and bit driver with handle, similar to yours. I use a Wiha 3801-03 as my dedicated stubby driver. I use a pen type multimeter (calidaka A3003), not as convenient to use as the normal style but more compact and most importantly it has a mains non contact voltage detection tip so I can test if mains power is on etc, also it has one tip on the tool so only needs one test lead to be stored with it. Very handy to have. I usually need narrow shaft or voltage rated screwdrivers for alot of my applications so though I have the bits for work and a bunch of other things I do use both the ratcheting and loose screwdrivers still. I recently added a led lenser W7r torch as a worklight to my kit. I have a pocket torch and k off at work at all times but the W7r let's get more light and runtime as well as hanging and being magnetic it folds and twists etc making it ideal to use even in the tightest of spaces. I keep a credit card size 600 grit diamond sharpener in my wallet. Excellent to touch up a pair of scissors on the go, take a nick out of the blade or flatten a damaged edge. Tons of uses. Had it almost 20 years before I replaced it due to wear and use it a ton.

[@todd.parker]

Great tips, thanks!

[@Jasonoid]

I bought that same Dewalt bit kit last year....I had to laugh when you had Milwaukee stuff in it. The Dewalt bits were garbage... They stripped out so easily, even when screwing normal screws into my fence! I swapped it out for a Makita bit kit and I've been much happier! You are making me reach for my Wallet, Todd! LOL

[@todd.parker]

Ha, yeah I can never get the bits out of the Milwaukee cases but they are better imo. I wish i had only bought these tools instead of all the stuff I tried over the years. The comments are tricky me because everyone gives me great ideas on more stuff to buy and it’s hard to resist. Having to make ally up what I’ve spent will keep my wallet closed.

[@davidjacobs828]

​@@todd.parker Superb tool kit sir ... Great video..thanks .,, I will be getting the multi blade saw ..

[@elgordoxxx]

Nice set of quality tools!👊🏻👊🏻👊🏻 Milwaukee came out with new packou ready bit cases that are awesome and now all the bits are easy to reach without hurting yourself 🙏🏻

[@Captmorgann]

I bought the Milwaukee 2553-20 and its a game changer. I use it for working on furnaces and vaporizers. Makes like so much easier. Really impressed with the m12 fuel line.

[@ryandury]

I've got one more suggestion for this amazing toolkit: A headlamp! All too often I find myself working in less than optimal light, and a headlamp directs light right where you need it, keeping your hands free. I recommend the Nitecore nu25.. it's a small, lightweight and rechargeable headlamp that throws enough light for typical home projects.

[@todd.parker]

Yes! I actually picked up the NU25 and it's my favorite headlamp.

[@ryandury]

@@todd.parker amazing!

[@carnold.knowledge]

I have many of the same tools you have, in a heavier Veto backpack. I will say after spending (hundreds? thousands?) on various European hand tools, I have banished all my Wera tools to auxiliary kits in favor of PB Swiss, Wiha, Felo, and others. Wera makes great little organizer cases though. Love the blade holder handle; will need to check that out. Some recent "life changing" tools I have come across recently that you might look at: Tsunoda zip tie flush cutter (~$20) Klein 56403 LED light (~$40) Klein 11061 Wire Stripper (~$20) Malco Eagle Grip 7" Vice Grips (~$40)

[@todd.parker]

Sweet, thanks for the ideas!

[@neolindholm1194]

The Hultafors talmeter is a great tool to score metal as u take measurements, u just slide the body along it and it makes a mark, I use it every day at work. It's wonderful

[@audiquattro3963]

Nice kit. OLFA 9766 Scissors would be a good upgrade on your shears.

[@peka2478]

in the end, you say one shouldnt start with buying cheap tools, but get a few good ones; Ive heard a different idea: buy rather cheap ones; The ones you dont use a lot, turns out you dont actually need, and the ones you need a lot, they get replaced soon with good / expensive ones, as you now know: you DO need these!

[@eastonwilliams1722]

Yeah but then you end up with wasted tools that take up space and no one wants and wasting money buying things twice

[@todd.parker]

Yeah, I’m now in the “buy once, cry once” camp where you buy something for life rather hit than buying lower quality stuff but I’m older and have a better job now

[@peka2478]

@@eastonwilliams1722 but when you start, you usually dont really know what you need and what you dont; and this way, you waste a bit of money on cheap tools you dont need, instead of buying expensive tools you dont need..

[@peka2478]

@@todd.parker yeah, having money to spend on good tools definitively helps ;)

[@todd.parker]

I agree but the point of this kit is the core stuff everyone probably needs so it might be safer to shoot fire higher quality

[@YoSpiff]

A useful piece and the closest I have seen yet for my own needs. I work on industrial printers and frequently have to travel by air. So I need something compact that closes completely with minimal empty space, as it has to go in checked luggage. My solution has been a "tactical" admin bag with several small molle pouches attached. I use a Fluke 101 for a meter. Nice and small with replaceable leads, which is important for me as I often need to get leads into very tiny connectors. It doesn't do amperage, however. But when I thought about it, I've never had to check current in the sort of troubleshooting I do. I saw a few tools in your bag that were very familiar, and a couple of others that I will consider obtaining. For flashlights, I like the "Slim" series from Nebo. Strong magnets on the bases, so I can attach them almost anywhere on the frame of the equipment. If I need a tool that I don't normally carry, I can always find a Home Depot wherever I am.

[@OneGold_777]

Just ordered the Veto street being in cart for months, Thanks for the update, as we use these kits it becomes immediately apparent what is superfluous and necessary

[@todd.parker]

You’ll really like the Veto. Nothing else has the kind of organization they offer

[@jontnoneya3404]

LOVE IT! I like how the Wera bits will fit a variety of drivers, that's really important but hard to find. While I love Klein tools, their multi-bit drivers don't really work with well with standard bit sets. I 100% DO NOT appreciate Klein doing this. They need to make their tools work with standard sized bits cuz we've all got millions of them and don't need more. Also I saw a mini Knipex dual plier set on Amazon. It has the pliers wrench and cobra pliers but in the smaller size. Anyways great vid and I really love this whole set. Well done.

[@AuthenTech]

Wow, sweet kit! I'll definitely buy some of those through your links. Great work

[@todd.parker]

Thanks, I really appreciate that. I watch your channel all the time so that’s high praise.

[@AuthenTech]

@@todd.parker - That's awesome to hear, thank you. (I just bought a *ton* of stuff through your links, thanks again for all your hard work putting this clean and efficient video together.)

[@Justhangingaround99]

Franklin sensors make the best stud finders ever. I install cabinets and use one every day, it never fails to find studs and I’m pretty sure it can read up to an inch and a half deep.

[@don9270]

Late to the game but I came here to say exactly this. I have 3/8" drywall on top of plaster and lath and the Franklin Sensors Max finds the studs every time- nothing else has even come close.

[@UUeldon]

Love the kit overall but can't help but notice that the step bit in the DeWalt kit is for a regular drill chuck. Swap it for one that has a 1/4" hex shank to fit your impact

[@behindthespotlight7983]

I was planning on making fun of your kit build but since you nailed an excellent DIY grab-n-go I’ll just say kudos 👍🏼👍🏼 Now for organizing 12 power tools and 16 batteries…

[@romasato]

What a beautiful set of tools. Great selection of "Knipex" as well, i have an almost identical setup. I work on electrical. All I can recommend to you is a vessel electric screwdriver for light screwing/fine electrical work, smaller than dremel driver and light weight, wont strip fine screws and can be used manually as a hand driver. For when my m12 series is just too powerful/cumbersome.

[@tannerwharton4670]

I would go with a variety of different stuff as a new build plumber. But I respect this kit and see a lot of value in what you bring

[@samberry6519]

Loved the video. Bunch of very cool products. I work in a large bakery setting and as much as I not on the maintenance team I might as well be some days. Thanks again. A

[@armedbobery4879]

Best advise I ever had gotten when trying to find a stud, use any stud finder, but then follow that up with a decent grade magnet. Run the magnet where the stud finder says there is a stud and see if the magnet snags on that line. If it does then there are screws there and likely there is actually a stud there. Stud finders with electrical or even better yet water pipe detectors are better too.

[@erickleinwolterink3524]

Recently added that Klein stick with the sockets myself. Great piece. Get a little 6 or 8" alligator locking pliers. It's like a third hand.

[@brianstollings6416]

This was absolutely sound advice. Every time I was thinking “but what about…” you covered it almost as soon as I thought it. Nice tool bag sir and great video.

[@iplayzthegames6968]

Im a carpenter by trade and tend to do trim work. The knipex are one of my favourite tools, i always carry them as they are so handy for getting smaller nails out of walls and timber where a hammer wont get enough grip on the head

[@tin1551]

Extremely well done video! Clear, concise. Thank you for all the time and work you’ve put into this as well as all the links and google sheet with the price breakdowns!!! Will be building one with your help after the first of the year.

[@todd.parker]

Glad it was helpful!

[@iplayzthegames6968]

Id recommend you look at the toughbuilt scraper knife. I dont often use the scrape function but it is so handy to have on hand when you need it

[@Phleanix]

Very much appreciate your closing sentiments. When starting out: Buying a small selection of higher quality tools is absolutely the right way of doing things. You can still buy yourself the initial "beater" tools first, but use this as a guide to work out what you use most. Get quality versions of THOSE tools. Expand later when you requirements change and you're able to earn/save more.

[@ryanwhite5482]

The first of these videos inspired me to put together a tool bag like this using a lot of the same tools. I was using a bigger bag from the start so already added a small Bosch impact and full sized hammer. I was surprised to see some substitutions (Wera compact drivers) but they make sense given the bag size. I've been avoiding the Veto bag because of its price but the larger Husky bag I'm using gets quite heavy as I tend to load it up too much. Glad you made an update video and I definitely love this kind of content!

[@todd.parker]

Thanks for watching both videos. Yeah this bag is quite small but it keeps me honest. I’ve been researching tool bags again and still feel like the Veto bags can’t be beat as far as organization. So many just have some outside pockets and a huge inner space that’s just a black hole. Look for them used on marketplace

[@ryanwhite5482]

@@todd.parker Well, just made the leap and picked up both the TP-LC and the Tool Check Plus. Your videos were a "bad" influence on me, between the first video and this one now I almost have the same tool kit. You're right on the reasonings behind each choice though! I was very close to returning the TP-LC for the TP XL almost immediately until I figured out a different hammer solution. I attached one of those coated metal wire keychains to one of the handle rings and I can slip the 12" hammer through and it holds it on the outside of the bag. If you're on reddit, I might have to post a tool bag pic and tag you.

[@todd.parker]

@ryanwhite5482 awesome, I’m on Reddit and would like to see your setup

[@ryanwhite5482]

@@todd.parker I posted my setup to r/tools today. I commented earlier but it included a link which might have gotten it auto deleted.

[@opulentcorners6277]

@@ryanwhite5482 nice! Where can we see it? How to find you?

[@AdamBoehme]

Next time you need to find studs, try using your levels magnets to find the nails. I'm just a DIYer but I have a level that is similar to yours and the magnets are strong enough to guide me to where the nails are. It has worked better for me than a stud finder ever has.

[@todd.parker]

Good call!

[@paulminor4707]

the way i buy tools, is that i usually get something cheap, and once it breaks or annoys me too much (because i actually use it a lot) it gets replaced with something proper. this saves me from getting expensive tools i dont end up using but still lets me buy tools for just one project.

[@MattLitkeRacing]

I have similar tools in my Veto bag. For needle nose I upgraded to the Snap-on LN46AFC. It doesn’t cut soft wire but for other tasks it’s very useful