Safety bolt is a brilliant tip! Can't believe this is the first place I've heard it. 👍
@stevenmark81564 жыл бұрын
I've never seen or heard of one falling strait down because the catch let go, but I've sure seen and heard of them flipping out from under the vehicle sideways! It drop the vehicle which is very bad. But if the end (top) of that jack hits you, you're toast. I've done work as a mechanic, welder, construction worker, electrician, plumber and I build and shoot guns, and these are by far the most unstable and dangerous tool I've ever used!! I think a table saw is next in line! There a couple of things that no matter how careful that you think you are, you're not careful enough! Just speaking from experience here! Lol
@thankyouyahusha49574 жыл бұрын
Make sure it's a high tensile bolt
@AndrewBrowner4 жыл бұрын
Steven Mark yeah its never going to suddenly drop straight down but it might stop it from ratcheting right to the ground, say you jack up remove tire but need another couple inches to get new tire on throw the bolt in so if you ness up it doesnt drop down and ruin your rotor
@stevenmark81563 жыл бұрын
@@stlpro2a386 Ok, thanks for the info. A little extra safety is a good thing. But like I say, I’ve never seen or even heard of one falling in way that that bolt would have made a difference. I’ve had them fall over sideways several times. They are a dangerous contraption for sure! But also a necessary evil at times. Lol
@DependableAutoTruck2 жыл бұрын
@@stevenmark8156 did you grow up when every car you bought had a bumper jack they were much more dangerous than a hi lift jack, the handle was a lug wrench with a chisel point on the other end to remove hub cap from the car and they just slipped in if you let go of one of them the lug wrench would eject and go 20 or 30 feet
@PaulKaiser424 жыл бұрын
Such a great video!! I treat my hi lift like it wants to kill me and it’s kept me alive!! 😉😉
@DirtLifestyle4 жыл бұрын
Lol that's a good practice!
@clivehorridge4 жыл бұрын
Paul Kaiser Like that Paul, yeah, they certainly are a loaded gun, and you never really know when they’re gonna go off 👍🏻🇷🇴🇬🇧
@billp16694 жыл бұрын
Your vids are tremendous!! I am 51 and have used this jack all my life. However it was called a "Handi-Man-Jack" back before I was a young farm boy in Indiana. It is great for stretching fence, lifting barn walls, pulling calves, lifting trailer hitches, spreading frozen barn doors and etc. You are doing a great service to tell people of its awesome uses, and its drawbacks. Just like any other tool, it must be respected!!!!
@DirtLifestyle4 жыл бұрын
Thank you!
@nothingtoseaheardammit4 жыл бұрын
If I could kindly recommend another important point. Make sure that the hilift model you're using is adequately weight rated for your vehicle - especially when swapping jacks between trail buddies. There's footage out there somewhere, if a hi lift violently snapping in half and striking the operator while trying to jack up the tail end of a H1.
@DirtLifestyle4 жыл бұрын
Great point! Thank you for this suggestion 👊
@shanecodman18424 жыл бұрын
Damn Chinese high jack
@m2003h4 жыл бұрын
I'm actually looking at that Hydraulic jack from ARB. It will be Somewhat more Friendly. But as in all things. There are Correct uses. And Sketchy situations.
@kdigiacomo4 жыл бұрын
Hummers get stuck or break? 🤔 I thought that was impossible. *Sarcasm....
@lukewalker11164 жыл бұрын
i was un aware high lift jacks came in different ratings.
@jake-mv5oi4 жыл бұрын
It was the time I had to use a high lift as a winch that prompted me to buy a proper winch. It worked but I never wanted to do it again... few hundred feet of bogged out clay trails 5' at a time.
@chisum81674 жыл бұрын
I have used these tools for over 25 years NOT always the "correct way". To ME WD40 is the best, it lubes, it blasts dirt mud and crud out of the jack. These jack's dont like being dirty or dry. Dad always told me to respect this bleeping thing, I always have, I'm still here and intact
@shanecodman18424 жыл бұрын
Chisum wd has saved my ass on an old rusty high lift before. Flat earth
@lukewalker11164 жыл бұрын
i prefer what i call witch piss Pb Blaster i know its penetrating oil, but i always have a can in the truck i found that the spray on motorcycle chain lube /wax works awesome as an actual lubricant the graphite powder could work good as someone suggested but the stuff doesn't bond
@2shobu3 жыл бұрын
Ballistol all the way for me.
@jrelitemods58302 жыл бұрын
I use Graphite powder it works great to keep it free
@krover014 жыл бұрын
Note about pulling the E brake. Its good practice to first put the vehicle in Neutral, pull the ebrake, then release the foot brake. That puts all the load on the parking brake and not the parking pawl. (Tiny pin in the transmission) Then you can put it in park. Its especially important in heavy vehicles parked on a slope!
@fzj80224 жыл бұрын
Hi lifts are also great on trailers, honestly used them more with trailers than the vehicle. Changing tires, unhitching the trailer, or winching it sideways to make it around a tight corner. Also definitely good practice to tear down a hi lift and know how it goes together so you're not learning on a trail when you suddenly need to repair your last resort.
@lednumaaron74754 жыл бұрын
If you have a High Lift with a big base I would drill holes in the base and use tent stakes through them to keep the bottom from coming out from under you.
@benmudn4 жыл бұрын
The Hi-lift can be your best friend or worst enemy depending on how you use it. I have the scar to prove it. Thanks for the video!
@roba15574 жыл бұрын
I learned the hard way with the handyman also, young and stupid, knew everything, didn't listen to dad, all that. Never had to repeat that particular lesson, once was enough for that one. Still using the same jack that tried to break hand, 30 years later, original pins and springs. WD40 is definitely your friend with that machine.
@benmudn4 жыл бұрын
@@roba1557 Yeah, been there, used a Hi-lift to pull a Jeep sideways out of a riverbank, recovered a truck out of mudhole that broke a wrecker winch, pulled an engine with a tree branch to replace a throwout bearing, and lifted countless farm equipment. Then I get knocked in the head when the jack slipped off the bumper when I reached down to switch the reverse lever while changing a tire on a little truck. Now I keep the Hi-lift at arms length away at all times under load.
@RunDub4 жыл бұрын
I consider a Hi Lift to be in the same category as an axe or a chainsaw... a super versatile tool, that you shouldn’t use if you haven’t been taught how to do so. It’s not inherently “unsafe,” but used carelessly, it’ll kill ya. Good video, Nate. Never a bad idea to reinforce the basics.
@DirtLifestyle4 жыл бұрын
I completely agree 🤘 thanks for watching bro
@heartsky4 жыл бұрын
Lot's of stories of people getting injured by a hi-lift. I've been brained by that handle and boy I never let that happen again. Mucho respect around those contraptions, extra careful. Nate you did a good job on the warnings.
@DirtLifestyle4 жыл бұрын
Thank you! I'm glad to hear you are ok 👍
@TwoFeatherChannel4 жыл бұрын
All the vehicles I owned back in the 60's and 70's had Hi-Lift style jacks. They were called Bumper Jacks but they worked basically the same, when all vehicles had steel bumpers back then. And they were safe and very dependable. The User was the unsafe part of it, like what you said the same applies with firearms.
@jdofmemi4 жыл бұрын
Dry graphite spray is the best lube for these. It won't attract dirt and grease that will bind up the mechanism.
@cjlarsen50304 жыл бұрын
Or dry moly lube.
@Blazer-fp8fo4 жыл бұрын
@@cjlarsen5030 I use PTFE spray. It dries in seconds, leaves no "goop", and is anti-static. Dust dont even stick to it. Hit the trails and get everything covered in dust, one quick slap with a glove and its clean as before. Its good stuff, just pick a brand. WD-40 has theirs and several others do as well. I use it on my come-along as well for the same reasons.
@graybeard734 жыл бұрын
Thank you for a truthful look at a hi-lift. At 71, I grew up using one as soon as I could carry it and had the grunt to work it. Bottle jacks are great, unless they blow a seal, and I used them as well. Bottom line is they are like any other tool, you need the right jack for the right problem - and need to know how to use which ever you use. Can a hi-lift hurt you, YES it can, but I’ve seen an axle slip off a bottle jack. Anything we do has the potential to hurt us. Proper training and refraining from adult beverages until after we are finished for the day goes a long way to keep us safe.
@Cornbreadthejeep4 жыл бұрын
I learned the danger of a hilift from a very young age, When i was 8 or 10 my dad let me let his jeep down off the hilift and expected me to hang on and well, i didn't lol I got a fat lip busted nose and eye socket and i had to have a couple stitches and i was super lucks, my dad still feels super bad for it, but its a lesson learned and i know to teach my kids to be careful around them. Awesome video ive really been enjoying the content.
@brisonpalmer67304 жыл бұрын
In Kansas we call these farm jacks or tractor jacks . Learned how to use one on the farm when I was young they do work great for jacking up large tractors.
@timparkin4854 жыл бұрын
Great to see some footage of the Landy out there! One tip I’ve heard (don’t know how much truth is in it), apparently you should always have the handle vertical when it has load on it. Otherwise it something goes wrong, the handle can shoot up and take out anything between it
@DirtLifestyle4 жыл бұрын
Very good point! Thanks for watching brother 👊
@murphtahoe14 жыл бұрын
Can be dangerous like most things, but when used correctly it’s an awesome tool! Wear gloves and be super careful when releasing it when your lowering the jack! Another superior use for it is to break a tire bead. Had to do that more than once and it was a game changer! Your channel is looking great brother....
@soulsurfer87974 жыл бұрын
Nice how to video Bro and exceptionally easy information flow. Just like the way you teach welding techniques you did this flawlessly.
@michaelwier12224 жыл бұрын
Excellent video on a subject that is rarely talked about. Thank you. One safety item that everyone has but is seldom used....common sense.
@johncortese7454 жыл бұрын
Great lessons learned here. I ended up in the ER due to my risk taking with one of these. I even told my buddy that what i was doing wasn't a safe but said screw it It will be fast and ended up with a blow to the head. Thank you.
@steeltube1954 жыл бұрын
Hi Lifts and guns.... Very useful tools you should be very careful with ..... so true !
@DirtLifestyle4 жыл бұрын
100% 🤘
@larrybriggs29204 жыл бұрын
Total common sense. I've used highlifts and the harbor freight version. Both are good tools. Just need to know what you're doing. It's not a regular jack. Just gets good instruction on what to do. Great video once again.
@JoeGarofaloII4 жыл бұрын
Wow I think this is the first Dirt Lifestyle I've ever seen with any thumbs down... people are not smart...
@bensonboy704 жыл бұрын
I saw you guys on you way back yesterday. I was sitting at the light when you turned onto spanaway loop and had to speed to to see if it was actually you. The rack looks killer!
@DirtLifestyle4 жыл бұрын
Lol thanks man!
@brokenpoortradingco4 жыл бұрын
Along with putting it in park and parking brake lock it in 4wd as well.. keeps all wheels locked. I’ve had them roll off the jack because the rear tire lifts off the ground in 2wd
@randominformation15664 жыл бұрын
Especially a land rover. They have a transmission brake. It is why they have wheel chocks in the factory tool kit.
@RockMauler2 жыл бұрын
Sound deductive reasoning is required to safely use this jack. This skill is not optional with this tool. Great job Nate.
@9Antonian2 жыл бұрын
Great video, used these jacks on the ranch for over fifty years, changing tires, breaking beads, tightening barbed wire, and even used them to help cows during the birthing season. They are a must have tool.
@gibson50564 жыл бұрын
NATE HAS THE BEST VIDEOS FOR THE AVERAGE OFFROADER!
@DirtLifestyle4 жыл бұрын
Thanks buddy I appreciate it 👍
@christopherwilson91404 жыл бұрын
You havent really owned a high lift until somebody screams at you and calls the cops because you have an assault rifle bolted to your rig.
@dennisgermain1894 жыл бұрын
that,s funny, sorry
@DirtLifestyle4 жыл бұрын
Lol
@twoallame4 жыл бұрын
That has happened with me. I just tell them YEP that's the 50 cal mount
@ypop4174 жыл бұрын
@@twoallame LMAO
@mattchandler43344 жыл бұрын
I've had mine on my truck for years and never encountered this... where do you live?!
@charlesb42674 жыл бұрын
I would actually encourage you to do a part two where you talk about the options that can be added or bought as such on a new jack ( base styles, top of jack tower bolt on accessories as well as best locations and mounting systems for vehicles, even lock systems to keep it from growing legs and walking or if the lock system high lift has will fill with dirt etc ), another words how to make it happen to carry a jack safely on the vehicle as I know a jack sitting in the corner of the garage doesn't do much good when your out on the trail ! . I tend to cringe when I see an engine hood mounted jack, perhaps its just me but I have my reservations about how safe that location is if one has a collision on the highway. Two thumbs up for this video though as you gave a lot of very good/safe practice advice we all should heed !
@DirtLifestyle4 жыл бұрын
Very good suggestion! Thank you 🤘
@ivanperkes60064 жыл бұрын
The jack stands are a great idea. Especially leveling up for your rooftop tent.
@slopsec23584 жыл бұрын
Got my very first HighLift jack in 1978 and still own it today, plus a couple more. Yes, just like many tools, these can be dangerous if you don't know how to use them, but used properly and safely, they're one of the best tools you can have with you in the back country.
@shaunadams31704 жыл бұрын
I use my hilift jacks all the time. To be honest I need more. I used to use the old Monte Carlo style bumper jack until I got my first hilift. I wore out so many of them the scrapyards I was buying them from gave my the ones they had left. Great video keep them rolling
@davidshoffner54304 жыл бұрын
KEEP BOTH HANDS ON THE HANDLE!!!!!
@redsapples14 жыл бұрын
This might be ur biggest viewer count vid. Because this is super useful for people who dnt really know how to use them. As always, your videos are the best
@woodstk704 жыл бұрын
Thank you Nate. I have been using a hi lift jack for 35 years. From lifting rigs to sheds to stretching fencing. People just need to learn how to take ownership of there own safety. If you don't know how to use a tool in a safe manner, don't use it until you do.
@hunterwanabe4 жыл бұрын
Your videos are some of the best around on 4x4 content thank you. who cares what anyone else has to say negative about anything you post. This video was great tutorial thank you.
@jeffjohnson84434 жыл бұрын
Good video. I've used hi lifts for almost 50 years on jeeps trucks tractors and even combines. It never occurred to me to put a safety bolt through a hole in the jack shaft. I will now and forever add a couple bolts to my kit!
@mrwilly664 жыл бұрын
Growing up in Greene Co. Indiana I always knew these "Farm Jacks" as "Bloomfield Jacks". Main reason is they are built in Bloomfield IN, and yes in Greene Co. They are usually the best worse option in everything I have ever used them for, but are very useful if used properly and safely.
@chrisgardner14314 жыл бұрын
Thank you again for offering up free safety tips to help while off-roading. I’ve owned a hilift for yrs and never needed it. (Ga mud). But I see the reasoning behind your tips. Thanks again
@shawnelkins3144 жыл бұрын
Just good common sense safety with straight forward advice. No BS or know it all attitude. Nice video. I'm sure it will help a lot of people. And....it will be in the back of my mind as well. Use one weekly on the farm and in the jeep. Definitely not a tool to be complacent with..
@DirtLifestyle4 жыл бұрын
Thanks brother!
@davidwilkinson43824 жыл бұрын
Very sensible advice, I treat mine with the respect it deserves and never get complacent. Not killed me yet and I plan to keep it that way. Keep up the good videos.
@wyattoneable4 жыл бұрын
As popular as the jack is, I can't find a place on my stock XJ as a lifting point. Never-the-less, you made some great points.
@stevenpolitte46284 жыл бұрын
You can use the tow receiver, if you have one.
@4wd_cherokee4 жыл бұрын
The Rover is looking so good!
@snicklefritzd36124 жыл бұрын
All good points. No matter what your experience level, it a good idea to take a second to think about what your doing using a tool like the Hi-lift jack.
@Sn95MoneyPit4 жыл бұрын
So glad this channel is taking off like it is, Good dude, Good videos
@DirtLifestyle4 жыл бұрын
Thanks buddy 👊
@MrMrsregor4 жыл бұрын
great video! 1 more tip; when the vehicle and/or jack feel unstable, use two ratchet straps to tie the top of the jack to two other stationary objects to keep the jack from falling over. i like to put the straps in a v shape about 90 degree angle from each other. it is also used to help keep the jack off of the body panels
@robfearnley97494 жыл бұрын
Excellent video Nate, I've used a hi-lift on my Landies here in the UK for 25yrs, never had a problem. Used correctly its a fantastic tool. I'm shortly goin back to your hi-lift accessories build episode to expand my jacks capabilities as i just bought a Range Rover Classic to modify and have some off-roading fun with :) Keep up the good work Nate love your new channel
@olinmachen95174 жыл бұрын
Excellent video. Nice work.
@stewartnagle67764 жыл бұрын
I've actually not wanted to use a hi-lift jack because of slipping side ways concerns, but that d-ring tip and bolt idea now has me thinking I might pick one up, thanks :)
@thedoorguycharlie4 жыл бұрын
It's all about "personal responsibility" If you mess up, own it. Thanks for the video.
@tonyb20864 жыл бұрын
Good safety tips on this. Tools in general are dangerous, I've had my Hi Lift "farm jack" 20+ years. Good lecture, I got a XJ and that Rover is cool👍
@richardeblantonii58934 жыл бұрын
I liked this video and the one where you made some of your own attachments. The Hi-Lift jack can be made a whole lot safer with attachments and there are a whole lot of them. Safe Jack makes a large square base with two cables that stabilizes the Hi-Lift Jack. They also sale small jacks and jack stands. Extreme Outback Beadbuster goes on the bottom of the jack so you can easily break the bead. Jak Jaw goes over the Hi-Lift Jack jaw and is a better fit for where you lift the vehicle on many surfaces. Hi-Lift Lift-Mate will allow you to lift a wheel. It goes over the Hi-Lift jaw and has a rubber pad and to straps with rubberized hooks. The pad rests against the wheel and the hooks go in the wheel voids or holes. This is to name a few attachments. I would like to see a video with you or someone demonstrating these types of useful attachments. Many people explaining the dangers and usefulness of the HI-Lift Jack act like alarmists instead of informing or teaching like you do. You appear to be the one with enough thought to do this properly.
@michaelblock39984 жыл бұрын
The most versatile tool in the tool box!!
@RoverRacer9134 жыл бұрын
Good info for those guys who are questioning their use.. these like you said should always be used in the dangouerous ways ONLY IF NEEDED, they have saved my ass, even with a winch and friends I'll still carry one, because of its mechanical reliability if the worst was to come. Only other recommendation I have is to just wear some gloves while using, your hands are your greatest tools and a jack can slip at any time 👍
@DirtLifestyle4 жыл бұрын
All great points! Thanks for watching brother 👊
@mattcobb19374 жыл бұрын
Great video! I love seeing how other people use everyday tools as well as safety measures they take. Thanks man!
@defendfreedom4 жыл бұрын
Brother, you never come across as "lecturing" anyone. You obviously are a genuinely kind individual who cares about the welfare of your off-road brethren. Your channel is epic for its information and wealth of knowledge for any one looking to improve their rig. That being said, sometimes "dumb" just gets people hurt, or worse, and in some instances, causes others to get hurt as collateral damage. People that misuse ANY tool, being powered or manual inappropriately, run the risk of injury or death. Yes accidents happen, but to your point, "learning how to use something" is the way to avoid accidents. Learn, improve, become a better person...and for the people out there that do not agree with your views, I have a simple answer for them. DO NOT USE ONE!
@DirtLifestyle4 жыл бұрын
Lol all awesome points man, thank you for the kind words 👍
@dougjohnson42664 жыл бұрын
Thank you sir. I hope I never have to use mine but all of these ideas are excellent.
@TheAndrewBailey4 жыл бұрын
Dude great video! So many people are clueless about HiLift's.
@sierramantrvlnus4 жыл бұрын
Love my high lift helps me get over fallen trees every year.
@jakeparrott90964 жыл бұрын
Never used one before. This is good info thanks man
@clydetracy774 жыл бұрын
I love how you ran that the high lift Jack over
@DirtLifestyle4 жыл бұрын
It can take it 👍
@erichughes90984 жыл бұрын
Thank you Nathan for the useful information. 😎👍
@ashtonmariefranklin7254 жыл бұрын
Awesome Video.
@jwconrad634 жыл бұрын
Great tips. Have had Hi-Lifts for a long time. Like most tools, the most dangerous thing about it is the nut holding the handle.
@derekbryant61374 жыл бұрын
I have been around those type of Jacks for almost all of my life my grandfather used them for construction work they are also a great spreader and you can also use them as a clamp or to squeeze things back together.
@sentencj4x44 жыл бұрын
Great video. You pegged the safety points. Great job!
@mikehoffman36904 жыл бұрын
ARB’s new jack is very nice, but it comes with a huge price tag. Appreciate the tips on the hi-lift.
@manuelwebe3 жыл бұрын
The safety bolt tip is so good. Thanks!
@MikeCurtis76634 жыл бұрын
We used these all the time on our farm 30 West of Enid near Ringwood. Yeah, I know you know where that is! :D
@xTinBenderX4 жыл бұрын
If you have room for a jackstand I recommend the Powerbuilt Black Alltrade 640912 3 Ton,All-in-One Bottle Jack
@Jim_woods4 жыл бұрын
Great information thanks.
@ericmillier66524 жыл бұрын
This is a dangerous tool and also a very useful one used the correct way. As always great video
@ericroot84754 жыл бұрын
I know you didn't build them, but I love those bumpers. that rig is looking fantastic with your new rack and RTT.
@DirtLifestyle4 жыл бұрын
Thanks man! The disco is looking good these days!
@kyhillbillys104 жыл бұрын
I've used mine for alot of things like breaking beads on tires. Also I've had a one fall over when I was swapping a leaf spring. I would recommend making a big base plate to help stabilize the jack
@jfeld-gp2qe3 жыл бұрын
I know Tahuya when I see it, love to find local channels. Great content brother
@Colorado4x43 жыл бұрын
Great video Nate! I’m glad you mentioned the wheel lug key too. We were on the Trifecta in Moab 5 years ago and were half way through the trail. My buddy hit a ledge too hard and blew out his sidewall. Too much tire damage for plugs. No matter, just throw the spare on. No lug nut key. I ended up roughing up his lug nut with vice grips and then pounded the closest fitting socket on the lug nut. The lug nut came off easily with the electric impact. That lug nut is still in that socket!
@dobrowolskibartosz4 жыл бұрын
Thank you!!
@shawnkeenan25764 жыл бұрын
Instead of a bolt in the Jack I use a smaller shackle and I can also use it as a point to attach a chain to if needed
@shawnkeenan25764 жыл бұрын
Like the one you have around the 7:45 mark lol. I need to watch these videos all the way through before commenting
@marktime483 жыл бұрын
Never thought of the safety bolt! I have a box of Grade 8 hardware and I'm putting one in the kit today. Thanks for the tip!
@kevingilson79174 жыл бұрын
Awareness is KEY thanks bro
@letfreedomrev13644 жыл бұрын
You’re videos are awesome. You should come to winter 4x4 jamboree next year down in st George Utah. It’s a great time in sand hollow!
@DirtLifestyle4 жыл бұрын
Thanks man!
@DirtLifestyle4 жыл бұрын
That would be really cool. I will try to make it but it is 1300ish miles from here lol
@letfreedomrev13644 жыл бұрын
Dirt Lifestyle I’ll keep an eye out for you. Look out for my 98 zj. It’s got my insta tag on the back @letfreedomrev13
@JacobsenCraig3 жыл бұрын
You could drop by Matt's Off-road Recovery and tune up their fabricating skills. It would be great to see you collaborate in a video
@TheBeardedJeeper4 жыл бұрын
Great video. I think they are safe if used right. I stopped carrying mine cause I never used it and it took up too much space
@benfischer6554 жыл бұрын
Someone with the balls to say this is the way and your wrong finally! I don’t even care if i disagreed with you (witch I don’t) I’m impressed. Good video keep it up.
@DirtLifestyle4 жыл бұрын
Thanks brother 👊
@charlesb42674 жыл бұрын
You were kind and didn't point out the glaringly obvious, I had not happened to see a prior video you filmed on making various High Lift attachments before I mentioned speaking about jack bolt on's. Mind you that doesn't take away from ways of mounting a jack onto a rig or perhaps you have a video on that too and I am really behind LOL.
@desertbigfootguy4 жыл бұрын
Used my hilift as a winch once when I was stuck in the mud. Works great!! But you need some additional straps and clevis.
@morgangaushell94143 жыл бұрын
Well done sir, excellent video even for the most experience off roaders!
@donewhiskey4 жыл бұрын
Man I miss my Disco! Highly underrated trucks!
@sawmanpeters62924 жыл бұрын
Great video, I use and really like my high lift jack. Maintenance is important, one time I needed to use it and the pins were sticking... wish I had checked it before leaving the house.
@TrashPandaGarage4 жыл бұрын
Rock slider flex between 0:21 and 0:22 seconds. Pretty cool to see in slow motion!
@Prairie77774 жыл бұрын
Excellent information and thank you very much for posting this!
@krover014 жыл бұрын
I ditched my high lift years ago. I found that I never used it. I always go to my bottle jack for changing a tire.
@GGoodroad4 жыл бұрын
I carry a bottle Jack too. I just find it to be light, easy and out of the way
@daleducharme62254 жыл бұрын
A Bottle Jack and a couple of blocks of wood, if you have a big lift, is the only way to go. Highlift Jacks are good for what they do. But changing a tire with one is ridiculous. Especially with A lift, flexy suspension, and no limit straps.
@mattlewandowski733 жыл бұрын
call me strange, but I believe in redundancy and versatility... I am partial to a hi-lift on the bumper and a bottle jack in the recovery box. there are times when a bottle jack is your best choice... there are times when a hi-lift is the better or only real option. the more options you (and/or your friends) can carry with you, the better.
@granitesand784 жыл бұрын
I had those lugs installed way back by discount and didn’t know what they were, and used a 17mm socket before I learned they were supposed to be an anti-theft lug. Haha.
@crazi4294 жыл бұрын
Great video but 1 thing I would add that is when ever your hand is on the handle make sure you have a very firm grip on it. That's where most the injury's I have witnessed have been the handle slipping out of the hand mid stroke.
@nickstewart12184 жыл бұрын
Extra bolt is going in the gear bag now. That's a good 1
@stevenpolitte46284 жыл бұрын
Nate, Thank you for emphasizing that the hi-lift jack as well as firearms and knives are all TOOLS and are DANGEROUS when USED IMPROPERLY.
@davidjarvis47014 жыл бұрын
Love the videos!! Love the rover!!
@QuickSpeedShop4 жыл бұрын
As someone who has spent the last two weeks with a extremely sore thumb after smashing it between the handle and body of my hi-lift jack I say listen to Nate! Mine automatically started to ratchet on the down stroke, yanked the handle out of my left hand, and smashed the crap out of my right hand thumb that as I was holding onto the jack body, kneeling next to it. Not good! Still on the mend and won't do that again.
@tonyb20864 жыл бұрын
Excellent point. That's always been my biggest gripe when using the jack. If you know about that issue, hopefully it'll be prevented. Sorry to hear about your thumb