100,000 RPM Carbon Fiber Wheel

If you’re struggling, consider therapy with our sponsor BetterHelp. Click
betterhelp.com... for a 10% discount on your first month of therapy with a licensed professional specific to your needs.
Our shop: waterjetmusuem.com
Music: Lud and Schlatt's musical emporium, Artlist
Don’t steal our videos, if you’d like to use our video for something please contact us via email.

[@deepblue812]

Time to bring n the slomoguys

[@jacobmensing7022]

I came to the comments to say it

[@atacstringer8573]

Bring in gav and Dan!

[@randyjr808]

Yup

[@Fuck_YT]

fr fr we need this collab

[@bloodysnday]

Yesss!

[@mkiii]

better help is a predatory service, charging exorbitant prices for minimal contact

[@dimitar4y]

all yt ads are scams. But people are too retarded to even figure out how to tie their shoelaces, so..

[@sbkenn1]

In the 1930s, a German industrialist persuaded the local government that if a flywheel was spun up, then a brake was applied, more energy could be extracted then went in. They agreed to fund an experiment. A pit was dug for the flywheel, it was spun up and the brake applied. The flywheel said "fck this" climbed out of the pit, crashed through the wall, travelled 2km, killing a cow and embedded itself in a house.

[@spoon-plays]

a true story ? if it is fuck me 2km is a long way lol

[@dimitar4y]

@@spoon-plays spinny things are scarily good at storing energy. scarily good. it's why they're used as batteries in huge powerplants.

[@lgjm5562]

Sounds like the researcher made a round off error.

[@sbkenn1]

@@spoon-plays I understand that it was a 3 meter wheel.

[@spoon-plays]

@@sbkenn1 that makes it even more scary lol a big wheel flying that distance oooof

[@nicholascrow8133]

You guys need to remake all your most successful wheels then team up with the slo mo guys and do a collab video and get some accurate rpm's on these things!

[@Xphinity]

I was thinking that too, but they need more safety for sure

[@gannas42]

Betterhelp - "Just ignore the multiple class action lawsuits and sign up today" Also, good news: cybertruck plating reduced to 1.8mm at the thickest panels so your jeel will go through cybertruck no prob. 👍

[@joe-31]

👍🏼

[@-DM]

We need a control sample. How would a pure resin wheel perform?

[@xxZigxx]

did anyone notice the sparks on the red wheel when the denim wheel was spinning? its like it was building statice electricity or something and had a lot of great sparks jump around the outside edge of the red wheel!

[@rogerstlaurent8704]

A good catch at the 6:37 mark

[@xxZigxx]

@@rogerstlaurent8704 its even more noticeable during the carbon wheel at 10:57

[@dainbramage3558]

i thought it was the laser from the tachometer, i might be wrong tho

[@bentleyrowland1]

It is a light up wheel

[@xxZigxx]

@@bentleyrowland1 is it? they show the wheel before and i cant see anything in it, and the light is on the exterior of the wheel and is very bright and a clear white for a lightup wheel.

[@WhiteFoux]

please don't use better help, they treat their therapists like shit, and they're currently battling the FCC on selling users data.

[@nuclearduck13]

What if you cut the carbon fiber into strips, coated them in resin, then wound them around a core? The tensile strength of the fibers going around the circumference should help it withstand the centrifugal forces better. You could do two, one with the fibers going along the length of the strips and one with the strips cut diagonal to the fibers.

[@jtjames79]

Also compress the puck. Going to need a mold.

[@sbkenn1]

Unidirectional roving, wound into a mold or bobbin.

[@dr.batman]

I'll never forget: *Jerkles*

[@BrokenHeart000]

Spønsør starts at 4:36 and ends at 6:17

[@UnderEu]

Put that in SponsorBlock

[@pindamonhangaba72]

Chad

[@bargauze9599]

Betterhelp is a sham

[@marluna_x]

I think it would be a good idea to make a strong shield for the nozzle, to prevent that probably pretty expensive nozzle from breaking... just a thought

[@reggiep75]

The 'Will we die!' In unison tickled my soul.

[@gmhs2]

Hasn't BetterHelp been exposed for being terrible numerous times now?

[@-DM]

Most high-paying KZbin sponsors are questionable. It hurts my soul every time I see Battleship NJ advertise art or noble titles or mobile phone games, but at least the sponsor money is going to a good place.

[@bradserfass4710]

It's not horrible and it's not hurting people, they have some therapists on there who's credentials are 100%. But still a lot of times people who need someone to talk to don't need a perfect person. They just need someone and that's what better help is doing.

[@bigfan6016]

I've used BetterHelp and liked their evening appointments. My counselor was good!

[@DannyDevitoOffical-TrustMeBro]

They are objectively terrible. I’m pretty sure they’re still in a lawsuit right now for selling user data to advertisers, which is always illegal, but far worse when it’s a service legally required to be as secretive with patient information as possible. They also got in hot water for having little quality control with who was allowed to work as a therapist on the site, with some qualified people and some wholly unqualified people hoping to make a quick buck.

[@HCivicFg2]

Put bearings in bearings in bearings and see how it'll spin

[@matthewbergeron3641]

Now all I can think is whether or not jeans can cut wood

[@brandonjones4666]

Unfortunately, that was an epoxy wheel reinforced with denim. You Would need to use a press, plus a vacuum chamber, and a lot less epoxy if you want to make a denim wheel.

[@MikeDodds]

Honestly, it’s absolutely amazing that you guys have all your eyes, fingers and other extremities!!! 😂

[@zebraforceone]

Looks like on the last one the noise was the bearings coming loose where the wheel wouldn't allow them out, the heat probably exploded it lol

[@dylanbassett8823]

you need to colab with the slow-mo guys

[@driverjamescopeland]

That one chunk of wheel broke quantum calculations 😂

[@metern]

You guys need to have the jet further away from the weels. And you have to program it so the arm moves the jet further away from the weels in the same speed as the wheels expand. 😁

[@metern]

Then, the jet won't cut the wheels before they explode.

[@rfitzgerald2004]

Another idea you could try, when making the denim wheel, use a slow drying resin and when all the layers are stacked up, clamp it down real tight with a hydraulic press until set in place. Would it offer a better bond? Or would it squeeze out so much resin that there wouldn't be enough to hold so tight? Maybe try the same with carbon fibre?

[@TheDanielscarroll]

I believe you need to layer a carbon fiber and the denim... And maybe some Kevlar...

[@aicirtkciub9167]

Glad to see you coat all the layers in epoxy. Too many people will put all the layers in at once and they always separate.

[@TimBielawa]

Maximum pucker factor

[@dimitar4y]

and they're like pucks. So double pucker factor.

[@myfavoritemartian1]

Make yourselves a heavier blast shield that even covers the ends with only a camera port and a port for an RPM sensor. In the explosives world, "the tighter you contain an explosion, the larger will be the yield." (Which you are doing by better and better wheels and ever faster RPM's)

[@joshnabours9102]

Better help records, and then sells the info from your conversations with their therapists to 3rd party advertisers. I am pretty sure they have lost at least 3 lawsuits over this issue in the past several years or so. I reccomend not advertising with them due to this.

[@shoking9825]

waiting for the tungsten wheel

[@MattIsTheCat]

I see the thumbnail and title change. It was originally featuring the carbon fiber wheel and asks something like: can we get a carbon fiber wheel to have the fastest revolutions?

[@jemmahughes952]

Everyone’s pay respect to Jean wheel

[@WaterjetChannel]

🙏

[@jemmahughes952]

🙏

[@jemmahughes952]

6:19 🙏🙏🙏🙏🙏

[@maudiojunky]

I think you might get a little more time before destruction if you wrap the wheel with a couple layers of kevlar, which has much higher abrasion resistance than carbon fiber.

[@xdragon2k]

The stronger the material bond of the wheels, the more violent the explosion will be when it loses its material integrity.

[@millwrightdad3753]

Better help is crazy EXPENSIVE!!!! Over $300 per month

[@philthy5690]

That first wheel just said "nope".

[@yeti4269]

8:57 Bro is apart of the elite

[@Rx_Lee]

What about getting a big roller bearing and try just that, if it cuts it try putting titanium on the outside and press fit it.

[@eternalvoid974]

Waterjets literaly prove that water can be just as deadly as fire if not more.

[@joeledwards6587]

I wonder if it would improve the strength of the resin if you put it in a vacuum chamber to pull any air bubbles out. Please bring in the Slowmo Guys with their high speed cameras, you'll be able to learn so much more about the failure points :)

[@celsonjunior9376]

imagine getting killed by a jheel

[@jb-uw2vt]

Check the underside of the water jet accordion arm thing. I think a piece went into it.

[@driverjamescopeland]

How about passive magnetic bearings? Air bearings won't work, because your axial load is too high... but I'm certain magnetic bearings would see a significant improvement.

[@pauljs75]

Seems like this kind of thing could also serve as R&D for RC car wheels/tires, because that's the current limiting factor on their speed runs.

[@besartkasumi9062]

The power of the jeel

[@SumUnicus]

6.36... At the inner whell... Was a portal opening? A wormhole forming? 😮 You mad scientists now 😬

[@Bill-lt5qf]

Can someone explain to me why Sisyphus keeps showing up the content I watch lately?

[@dimitar4y]

youtube uses a braindead algorithm to recommend things to people.. Also, they get paid big bucks to censor channels or push up channels..

[@Golddust110]

First one was like it was playing prop hunt and was found

[@EddyKorgo]

6:35 check out the plasma forming on a red wheel. xD

[@elliottadair]

The jheel! 😮

[@maxleadleybrown]

Did anyone else notice the sparkly lights around the red wheel - is that the same phenomenon as helicopter rotor sparkles?

[@i0Kuny]

Wheelie Jean turned out nicely! xD

[@andrewcastiglia9548]

You guys need to build a beyblade launcher powered by the water jet and some gearing and set the world record for the fastest beyblade

[@grumps5940]

I think the Slowmo Guys need to give you a visit.

[@dankster990]

Please collab with slowmo guys!

[@destroierlider]

A collab with the slowmoguys would be awesome man!

[@IIIIIIIIIIIIIIII217]

I can confirm the wheel do be spinnin.

[@DUKE_of_RAMBLE]

*W. T. **_absolute_** F.* is happening at 6:35 and 10:56 around the perimeter of the OTHER WHEEL....... 😳 _(I recommend watching at half, or quarter, playback speed)_ I had thought skateboard trucks didn't have live axels, but I guess that's wrong (since the other wheel falls off later lol) _But yea,_ there's clearly *something* going on with that other wheel, which based on the color (blue), appears to be... electrical arcs??? 🤨 Was there such a high build up of static electricity, that it was discharging from the other wheel? _(with that wheel's material acting as a dielectric?)_ And it's not a weird effect displaying in just that camera, as the GoPro footage @9:28 *also* shows it! (albeit, less clearly due to the distance) I don't know if this works how it does on Twitter but if it does... @SteveMould you have any thoughts? 😊

[@JustAnAverageBigGuyWithABeard]

The Jean wheel was not layered properly. You layered it the wrong way. Can’t believe you didn’t realize that.

[@AfromanWTF]

I got a water jet add on the water jet channel

[@gsestream]

nice heat shield coat, the less you know, 3d woven carbon fiber with non-cut fibers. yep sewing machine around and around the wheel. making new layers.

[@queequegsdesire4698]

Do a colab with the Slow Mo Guys and film it with a million frames!

[@delofj]

Maybe now you should make a wheel stronger than the skateboard wheel

[@pav5000]

You guys should do a collab with the Slow Mo Guys

[@lahoozer6694]

More carbon less resin. Resin is weak, carbon strong. Use large 2" chop carbon also for more strength.

[@cso6565]

Water jet question, would we(humanity) be able to create a water jet machine in the remote past like 5 to 7k years ago?

[@Xphinity]

Dude you guys need a barrier, you are so lucky that Jean wheel did not hit you! Please put something up fellas, I don't want to see an "update" video on one of ya'll

[@benturnbull6245]

i think all the mean people in the comment sections are dissapointed the part of the wheel didn't hit you

[@spongebobseyelashes8548]

You are among the funniest creators out there. The little side bits you add and the commentary is on par with any other top comedian you can find in yt shorts. Great vid as always

[@xhelizh]

noway i see you sponsoring a therapy company after i got sad and thought about some thing😂

[@SiliconeSword]

1:10 what a nice couple🥰

[@tankerboysabot]

Slomo guys or ballistic high speed need to be on here.

[@simonsund]

call up the slowmo guys and find out how fast it spins !

[@SpaceTech54]

Sounds like you have a weapon.

[@NicoChristmannRecords]

11:22 - AH! Ah! Ah! ah! Ah! and AAaaAAAh!

[@msilfer]

Try winding the carbon fiber around the axle

[@theflamingbanana7491]

Get the slowmoguys on this shit ASAP

[@Micreathonn]

slow mo guys collab when

[@ackliph]

Best sponsor placement ever!

[@chrisgoody8018]

I got a omax waterjet add on this video

[@sinisterthoughts2896]

Does the cyber truck actually stop bullets? It's basically failed every other claim.

[@Mohawkris_8]

Been waiting for some cool stuff!!!

[@Lazycat7854]

Does anyone think it sounds like a tornado siren? 10:58

[@jurgenknol5721]

So much force, obscene!

[@Yoshikaable]

Great video, really enjoyed the experiments!

[@DrowsyFire378]

I just thought of something!!!! Blue jean saw blade would be soooo cool to see them try that 😂😂😂

[@DrowsyFire378]

P.s. I love you guys I've watched this channel since I was 18 and I'm still here at 24.

[@jeremyj3591]

You should do this with the slowmoguys

[@rumpleforeskin1812]

I love this channel so much

[@james10739]

Well the cyber truck is stainless steel so stronger but i don't believe its 1/8 inch thick it would just weigh to much

[@linkh200]

Paging The SlowMoGuys

[@bazukame]

make a collab with slow mo guys to see this pleaseXD

[@thesleepingone]

I thought it would have been a strip of carbon fiber or jeans wrapped around something to make layers.

[@yuriibil7194]

Streng eksperiments!

[@maybenotross5772]

is it just me or did they look baked af

[@JazzForYourSoul]

Jeels can break steel shields

[@SaltyCorncob]

MORE JORTS

[@jsweizston5410]

1/16 inch steel is not exactly anything crazy as far as thickness goes.

[@rustyudder]

Running with swiswer

[@StupidRobotFightingLeague]

ARRRRRT!

[@GAMINGOBRIEN69]

Do a concrete wheel

[@jackemled_but_gay]

Isn't BetterHelp super awful?