No video

100 horsepower for$1000 bucks!!Must have mods for 5.3 Silverado

  Рет қаралды 3,002

4Low-DIY

4Low-DIY

Жыл бұрын

Check out my truck norris cammed Silverado and see some of the cheap horsepower upgrades i did that anyone can do #silverado #truck #cammed #trucknorris #performance #performanceupgrade #horsepower #cheap #cheapmods

Пікірлер: 26
@Southrn_Maniacyago
@Southrn_Maniacyago 10 сағат бұрын
224 Cam Longtube headers Tbss intake 35lb injectors Last thing TUNE easy 100hp gain maybe slightly more
@autumnjeserich2689
@autumnjeserich2689 Күн бұрын
The doorman oil cooler lines I put on my 6.0 on my 2500HD caused my motor to fail a month later so I had to rebuild. Spent like 1600 for about 180 HP making it a 402 stroker but it makes over 600 ft lb of torque naturally aspirated
@Ralf1NATOR
@Ralf1NATOR Күн бұрын
@@autumnjeserich2689 man that sux. I hate when one fails but then you have the perfect excuse to upgrade lol
@autumnjeserich2689
@autumnjeserich2689 Күн бұрын
@@Ralf1NATOR yeah I don't get why people would rebuild an engine stock. If I gotta tear it apart and buy new parts either way might as well buy better parts. I got a forged bottom end and a SS2 cam and ported my heads while I was at it. Now I hope the stock torque converter can survive long enough for me do my manual swap in the truck.
@Ralf1NATOR
@Ralf1NATOR Жыл бұрын
I would be happy to help with advice or know how. Not fishing for likes or followers but if any of this interests you I'm here. Will try to post a video per week on free upgrades anyone can do.
@robinator503
@robinator503 Ай бұрын
Like your mods. The " cold air" is more likely reduced restriction vs dense air.
@Ralf1NATOR
@Ralf1NATOR Ай бұрын
@@robinator503 i agree with that. Thanks for watching. Ive done more upgrades u can see on a newer video. Truck is a beast now
@robinator503
@robinator503 Ай бұрын
​@@Ralf1NATOR I love the refinement and simplicity of the older Chevys and even dome Fords. I'm gonna get a low mile 5.3 4x4! Thanks
@Ralf1NATOR
@Ralf1NATOR Ай бұрын
@@robinator503 yeah ive been impressed with the 5.3. Was always a 351 ford or 350 chevy guy before. The little 5.3 are easy to make piwer with
@Jrobs124
@Jrobs124 Ай бұрын
Hey I got a flashpack f5 to tune my 06 yukon xl 5.3 liter. Would really appreciate some ideas for custom tunings
@Ralf1NATOR
@Ralf1NATOR Ай бұрын
@@Jrobs124 ill have to take a look at flashoack. I assume its similar to all the others
@sarsavage
@sarsavage Ай бұрын
I am doing the same but with a 2014 gmc 2500 I just got the truck Norris came and LS6 springs to match it my motor is 6.0 with the 823 castings I would love to tune it myself so can you help me? When I get the HP tuner , I will hit you back up
@Ralf1NATOR
@Ralf1NATOR Ай бұрын
@@sarsavage i would be happy to. I have several friends on here that are better than me and they're quick to help too. You should look i have several truck norris videos
@jesseesquivel6248
@jesseesquivel6248 4 ай бұрын
What stall converter you running and what stage cam you have
@Ralf1NATOR
@Ralf1NATOR 4 ай бұрын
Im running the btr truck norris cam with stock stall. Its running in the 9's right now in the 1/8th mile. Still tuning
@shadowopsairman1583
@shadowopsairman1583 4 ай бұрын
What Engine RPO do you have, did you need to change injectors? I know the 2006/7 4.8 are 25 Pound injectors. If you needed larger injectors, can the L59 flex fuel 1s be easily swapped to the LR4 fuel rails. I know there are adapters to go from multec 2 to ev6. Its for the Iron 5.7 im about to swap into my 07 to replace the water sumped 4.8... same cam as yours.
@Ralf1NATOR
@Ralf1NATOR 4 ай бұрын
Lol im not sure how to answer some of this. This video is my 1st i believe. At the time it was stock injectors. Only mods were the cam,CAI,electric fans. I don't know much about the injector swapping. Still learning that myself. I just put in e85 1000 cc snake eaters into my factory rails for the fast intake. I have found out since making this video that my tuner at the time was a fraud. Hes out of business now. It waa tuned on straight manifolds,no accessory belt,cold air blowing into the intake on 100 octane. The truck definitely has 400 crank HP+ but the track tuning im working on clearly shows the WHP around 300. With proper tuning in this configuration the 320-340 WHP is achievable
@shadowopsairman1583
@shadowopsairman1583 4 ай бұрын
​@@Ralf1NATORgot ya, yeah the 6.0 have the same pound injectors is why i was thinking the stock units will work, but for you they seemed they did. This truck will only see a track with a car on a trailer lol
@Ralf1NATOR
@Ralf1NATOR 4 ай бұрын
@@shadowopsairman1583 ive had 0 issues with the stocks. Actually at wot theyre only running about 60%
@shadowopsairman1583
@shadowopsairman1583 4 ай бұрын
​@@Ralf1NATOR richard was saying I wont have enough for a truck norris but you prove otherwise lol
@Ralf1NATOR
@Ralf1NATOR 4 ай бұрын
@@shadowopsairman1583 lol yeah street value thats my whole thing. Real world test
10 Minute Cam Swap!
10:17
Bo Builds
Рет қаралды 919 М.
Everything You Need To Know Before Cam Swapping Your LS Engine
9:34
THE BEST HOW TO CAM SWAP ANY 99-07 GM TRUCK (IN DEPTH)
47:49
Jack Stand Builds
Рет қаралды 191 М.
TSP Cam Install - Chevy 5.3
17:32
GT's Performance
Рет қаралды 232 М.
Part 2! Dyno Tuning with BTR Truck Norris Cam!
23:45
Matt Sanford
Рет қаралды 26 М.
CHOPACABRA CAM INSTALLED!!!! *SOUNDS WICKED*
18:39
lmfscrew
Рет қаралды 469 М.
HOW TO: MAXIMIZE JUNKYARD 6.0L LS PERFORMANCE
18:30
Richard Holdener
Рет қаралды 950 М.
Top 5 Mods To Make An LS Engine Reliable.
24:02
Taylor Ray
Рет қаралды 829 М.