100 HOUR SERVICE ON A F200 HP. YAMAHA

[@CRYANZ]

Good video. Thanks

[@oceandeepfishing4555]

Thanks for watching. Hope this helped you out.

[@OutOnTheReef]

Awesome video cap. The Yamaha 200 is a awesome engine and fuel efficient, love it, and you saved alot of money cap.

[@oceandeepfishing4555]

This is my second yamaha. I love them. Part two is out next week. Yeah from the prices I got to have it serviced I saved about 600.00

[@captnkarl4401]

Great video. I really like the attention to details. Thank you.

[@oceandeepfishing4555]

Thanks a million for watching. I have a part 2 that finishes the complete 100hr service. You can check that out too. I hope it helped you and others to feel confident to do your own maintenance. Tight lines..... and don't forget to check out all the equipment I use on my fishing trips in the video descriptions.

[@johns.8530]

What an awesome video. Just got quoted $1,000 for this service. Now to find all the parts you used. I have the same motor so this is really helpful. Just subscribed.

[@oceandeepfishing4555]

Thanks John. Appreciate the kind words and I'm glad it helped you out. I have everything listed in the description below the thumbnail. If you have any questions please feel free to contact me. Tight lines.....

[@oceandeepfishing4555]

John, there's two video parts to this service. This one then I have a part 2 which coveres the impeller change

[@johns.8530]

@@oceandeepfishing4555 thank you. Already watched it and that was great too. Add it to my to-do list. Question: What grease do you use in your grease gun?

[@oceandeepfishing4555]

@John S. I use Lucas marine grease. I think it's back and available again . When I did this service I couldn't find any in stock. I used one from Walmart that was compatible but I would definitely use Lucas if you can get it.

[@johns.8530]

@@oceandeepfishing4555 sounds good, thanks again. I just ordered the Yamaha grease on Amazon.

[@markcapparelli5086]

great video thank you. very educational. I think I am ready to tackle this on my own after watching this

[@goodtimeswithal]

Nice clean channel. Keep the videos coming.

[@oceandeepfishing4555]

Thanks for watching the video. Im trying real hard to put more content out but work and life have been keeping me way to busy. Its been 4 months since ive been on the boat or gone dock fishing. Hopefully soon ill get a break to go tight lines

[@STR8SHOOTER1000]

please dont use a screwdriver on the spark plug use the gap tool to adjust gap, Great vid!!

[@oceandeepfishing4555]

Thank you for watching. I always use the gap tool to set the gap but sometimes I've had the gap closed right out of the box. The tool wouldn't open it so the use of the screw drive was needed. Thanks for your comments. Tight lines...

[@GmailAccount-g5x]

Don’t ever pump gear oil in with the top screw tightened. You can blow out the seals. FYI

[@GmailAccount-g5x]

This is a great video. What I do I give it a couple extra rapid pumps with the screw out, pop the upper screw in and then the lower. I blew out a seal one time pumping in a little extra with the top screw in. This video is super informative. I’m baffled why people pay thousands to have this stuff done. Your step by step will really help a lot of people.

[@GearyLong]

You really tighten the spark plugs! I never make that tight. reccomend a torque wrench, and anti seize

[@johns.8530]

Got another question for you. Do you ever spray salt away inside the engine compartment? I am finding salt inside my engine compartment and don’t want it to corrode. I sprayed the salt away on and just left it without rinsing. Do you recommend Yamaha silicone spray protectant?

[@oceandeepfishing4555]

Hello John yes. I highly recommend that you use the Yamaha silicone spray but make sure you remove all the salt and rince it before you spray the silicone.

[@johns.8530]

@@oceandeepfishing4555 sounds good, thank you.

[@teddobol]

There's nothing wrong with that quick silver water separator you can continue to use those

[@oceandeepfishing4555]

I've used this filter in the past when I had my mercury motor. I do agree that there is nothing wrong with them but because I now have a yamaha engine I just prefer to use yamaha parts. Thanks again for the comments

[@fishydubsfishing6516]

Why would you change the engine oil and not the filter that makes absolutely no sense to me at all

[@oceandeepfishing4555]

@@fishydubsfishing6516 I did change the filter, but I had to take it somewhere because I couldn't get it off.

[@oceandeepfishing4555]

@@fishydubsfishing6516 And the filter that I had to take somewhere was the water fuel separating filter. But if you rewatched the video shows your right plane as day changing the oil filter on the side of the engine.

[@oceandeepfishing4555]

So let me explain to you and any viewers that might be reading this when I said. I didn't change the Oil filter on the oil change. That was because it was a 20 hour. Service oil change and the Yamaha maintenance manual said not to change the oil filter at this time to change it at the 100 hour oil service. And that's directly from the Yamaha maintenance. Not something I made up.

[@oceandeepfishing4555]

@@fishydubsfishing6516 kzbin.info/www/bejne/hpmneImjeb99a9Esi=FaJiEmCUCg3TcWtl

[@fishydubsfishing6516]

I've been a mechanic Mill right industrial maintenance all my life and I rebuilt engine's when an engine breaks in you're wearing off a lot of material as the engine seats in that's why they want you to change the oil all that material on the break in process gets trapped in the filter I don't know why Yamaha would not recommend changing the filter also if the filter gets plugged with foreign material from the break in process it will bypass and blow all that material into the new oil for people that don't understand how oil filters work these engines cost $25,000 now I would not try to save $20 on a filter

[@WillStuart-rg2ee]

Water pump video?

[@oceandeepfishing4555]

@@WillStuart-rg2ee check out my part 2 100 hr. Service. Its all in there. Thanks for watching

[@MikeSalisbury-h2u]

.40 gap? I think you meant .04 gap. Also you didn't change your impeller in the lower unit.

[@oceandeepfishing4555]

@@MikeSalisbury-h2u impeller change is in part two

[@TV-nv8qq]

What's the spark plug part number?

[@oceandeepfishing4555]

To be honest i dont know. I just went to my local yamaha dealer and he set me up with them

[@CRYANZ]

That prop looks really small for a 200

[@oceandeepfishing4555]

Thats from the manufacturer and paired for that motor. So far i have no complaints with it. Good out of the hole and plains quick.