I'm an old gal and let me tell you this... I have NEVER seen more beautiful coasters. You rock!!!!!! And many kudos to you for this video as I pour almost exclusively on 8x8 inch tiles so this is just what I was looking for. Big hugs from Colombia!
@ambiyond3 жыл бұрын
Thanks for a great tutorial! I love the fact that you take the time to go into small details that makes this very newbie friendly. Many nice videos out there but most skip on the interesting details!
@TillyDouglas3 жыл бұрын
You're very welcome, thank you for your lovely comment! 🌹
@itsmejess9802 жыл бұрын
What size tiles and cork backing a are you using? They fit perfect.
@lyngriffin215012 күн бұрын
Your tutorial is absolutely fabulous ❤thank you so very much. Everything you share is very helpful indeed. You’re an inspiration and kind heart. Thanks again 😘🌺🙌🤩💕🎨🏆
@margaretrangel7110 Жыл бұрын
Thank you Tilly… a lovely video… informative, direct, concise, all encompassing. I love the sound of your voice! Thank you for sharing♥️🐾☘️
@Marie-LouiseArtАй бұрын
Hello Tilly, thank you for your lovely comprehensive video. I am in Cornwall and tried this but for some reason I had holes in my coaster resin and all of them didn’t touch the sides. Is it a question of adding more than I am? Thank you ❤
@TillyDouglas28 күн бұрын
You are very welcome! The most common reason for the resin creating holes and pulling away from the sides is oil on the coaster. So either the use of oil in the paint mix, or oil transferred from your fingers. Before you put any resin on, you need to thoroughly clean all the surfaces with isopropyl alcohol.... make sure to wear gloves whilst cleaning, and every time you touch them after cleaning so you don't transfer oil from your fingers back onto the tiles.
@Marie-LouiseArt8 күн бұрын
@@TillyDouglasthank you so much! I’m going to sand them down and use alcohol and so it again, How do you rate the resin in the UK? I have craft resin left to use? That’s my only one so far xx
@Art_lover_4f43 ай бұрын
Your tiles are gorgeous! I wish I had found your video before attempting to resin my coasters... 😢
@kathymacchioneleggett19053 жыл бұрын
Those coasters are gorgeous!!! I’d love to know what colors you used 😊
@TillyDouglas3 жыл бұрын
Hi Kathy, thank you very much! I can't remember all the colors I used now, but I'm pretty sure I recorded a creation video for both the gold set and the pink ones... Take a look at this play list which is the painting on tiles videos, the colors will most likely be listed in the description under the video. 🌹 kzbin.info/aero/PL_Or07Z1N33YKtndltC_0pBxgKIOaNtNd
@RaindropArtbyNikkiRainey Жыл бұрын
I SO enjoyed your video! It was SO helpful and with your beautiful accent, I could listen to you all day! ;) Thank you for the great information! I learned so much!
@TillyDouglas Жыл бұрын
Aahhh thank you very much for your lovely comment Nikki, I'm so pleased my video was helpful for you! 😃
@saramarshall20713 жыл бұрын
Tilly, you are absolutely adorable and I love to see your lovely face! Thank you for doing this tutorial. I'm in the US, so I need to find a good resin here, but I'm very excited to finally get started on my tiles! It's a learning process, but I AM learning!
@TillyDouglas3 жыл бұрын
AAhhh Sara, you are so lovely, thank you!! I hear that KS Resing is good... I'm in the UK, so can't get it, as it's only available in the US... But if I could get hold of that one, it's the one I'd be using! 👍 🌹
@ranjinichoudhury8855 Жыл бұрын
Best video ever
@TillyDouglas Жыл бұрын
Thank you very much! 🥰
@lyngriffin215012 күн бұрын
I agree 💯
@Stuntmandebter Жыл бұрын
You’re Paint Pours are smashing!! :) Loving all this
@TillyDouglas Жыл бұрын
Thanks so much 😊
@sharonconway9273 жыл бұрын
Thank you Tilly I have watched hundreds of videos found yours great and easy to follow. It is nice to have information for us in the UK. Most are US or Canada and getting good supplies is often difficult. Good old B & Q. 😄👍👏
@TillyDouglas3 жыл бұрын
Thank you so much Sharon, I'm so pleased it was helpful for you! Yep, gotta love B&Q!! 😆
@IAmFrankieKnight2 жыл бұрын
Thank you so much for your video, so well explained, lots of details but not too much. I poured resin on two coasters today, first time EVER... can't wait to see how they turn out, but still have to wait another 12 hours!!!
@TillyDouglas2 жыл бұрын
You're very welcome, I'm so pleased it was helpful for you! 🌹
@vonellevanzant2374 жыл бұрын
Thank you so much for this educational video. I do want to say those coasters are beautiful!! Oh, my! I love them!
@TillyDouglas4 жыл бұрын
You're very welcome Vonelle, I'm happy to help. And thank you for the compliment! 😃
@vonellevanzant2374 жыл бұрын
@@TillyDouglas you are so very welcome! 🥰
@leslieparlee43919 ай бұрын
Haven't used resin before and you have made it feel doable ... thank you. Also, love your name!! My Mum's nickmame (and maiden name) was Tilley ... from Guisborough
@B3Kusa Жыл бұрын
Your art is breath taking. Thanks for your tutorial
@cliqboom10883 жыл бұрын
Those tiles are really sharp. I am going to try and make some with my daughter. Thanks!
@TillyDouglas3 жыл бұрын
Excellent! I hope you have fun making them!
@louisemcadam26092 жыл бұрын
@@TillyDouglas thank you so much Tilly, I'm so glad I found your channel, all your info made perfect sense, very clear and your work is just lovely, you have given me the knowledge & tips and the inspiration to crack on. Many blessings xxx
@TillyDouglas2 жыл бұрын
Hi Louise, thank you so much for the lovely compliments! I'm happy I was able to help 🌹 💜
@billyandchristiane3 жыл бұрын
Tilly, this is fabulous! Thank you.
@TillyDouglas3 жыл бұрын
You are so welcome, I'm pleased it was helpful!🌹
@deborahcollard96392 жыл бұрын
Thank you Tilly….I have ordered some….really appreciate you getting back to me so quickly. HNY!
@TillyDouglas2 жыл бұрын
You're very welcome! HNY to you too!! 🌹
@RainDropps Жыл бұрын
@TillyDouglas did you make a video using the hot cup of water test on these tiles? I would love to know the results if you did. Thank you.
@deedeea39898 ай бұрын
I would also love to see. We have tried so many resin and no luck. I hope you can show us the cup water test. Loved this video so much! You are a wonderful teacher.❤❤❤
@krishoward77502 жыл бұрын
Thank you so much for your little hints and suggestions! I have not been using tape and have had to swipe and/ or sand. UGG
@TillyDouglas2 жыл бұрын
You are so welcome Kris! It's the little things that can make a big difference! 🌹
@favorites2517 Жыл бұрын
Wow! Beautiful work and VERY INFORMATIVE video! Thank you!
@LouiseMcKayArt2 жыл бұрын
Wow, great tutorial Tilly! So informative with great tips, advice and instruction with such a calm delivery for a newbie who needs to hear it like you delivered! Thank you!!
@TillyDouglas2 жыл бұрын
Hi Louise, thank you so much for the lovely compliments! I'm so pleased my video was helpful for you! 🌹
@LouiseMcKayArt2 жыл бұрын
Thank YOU. I ordered the self-adhesive cork backs through your link. We’ll see how it goes!
@larrypelfrey51039 ай бұрын
Thank you for your presentation it was very informative.
@healingartbylunasky943 Жыл бұрын
Thank you so much as I am struggling with the resin
@cheralwhite76672 жыл бұрын
Thank you so much! You were a great teacher!!
@TillyDouglas2 жыл бұрын
Glad you enjoyed it!
@pyritecindi73843 жыл бұрын
What a great video!! 😀. Thank you so much. Using those nets that cover food is genius. 👌💕
@TillyDouglas3 жыл бұрын
Thank you so much! I'm pleased it was helpful! 🌹
@patriciahogg57633 жыл бұрын
One of the best videos out there! Thanks for sharing!! 🤗🤗🤗
@TillyDouglas3 жыл бұрын
Wow, thank you so much for your lovely comment Patricia! 😊 🌹
@elizabethbradshaw97293 жыл бұрын
You are awesome! I subbed. So easy to listen to, so informative without being wordy and confusing. I absolutely enjoyed this video. Thank you for your tutorial! This was brilliant!
@TillyDouglas3 жыл бұрын
Thank you so much for your lovely comments Elizabeth! I'm really pleased you like my video!! 😊 🌹
@feliciamoran75153 жыл бұрын
Thank you for sharing this video! It really helps me to buy the right Resin for Ceramic Tiles!!
@TillyDouglas3 жыл бұрын
You are so welcome!
@jensenbabbie24153 жыл бұрын
Thank you for all your help.
@TillyDouglas3 жыл бұрын
You are very welcome! 🌹
@pourartistacrylicsbyshanno39872 жыл бұрын
I know you made this a long time ago but thank you. This was very thorough just what I needed before giving it my first shot.
@TillyDouglas2 жыл бұрын
You're very welcome Shannon, I'm so pleased it was helpful for you. 🌹
@Jennygeee4 жыл бұрын
Perfect! You are a star, thank you so much, I actually did four a couple of days ago but they have dried with a few little dips in them, I wonder if that’s the resin or the way I did it. ❤️❤️ just have to say how nice it is to see your lovely face xx
@TillyDouglas4 жыл бұрын
You are very welcome! 💜 Did you clean the tops of the tiles before you poured the resin on them? It could well be the oils from your fingers that caused it, resin really does not like oil of any sort and it will push away from it. Give them a wipe down with a tiny bit of Isopropyl alcohol on a cloth and hopefully it will sort that for next time. 👍 ... Oh and I'm usually behind a camera, even for photos, so this was a big deal for me! 😊 😃 💜
@Jennygeee4 жыл бұрын
@@TillyDouglas I wiped them down with a kitchen wipe so not sure what is in them, I.m going to lightly sand them then wipe them with some Isopropyl and try again, see what happens 😊. You shouldn’t hide behind the camera but I know how you feel because I’m the same ❤️
@michellesanchezford3578Ай бұрын
These are gorgeous. Where did you get the yogurt containers from?
@pamh96743 жыл бұрын
Thank you so much Tilly! You are just lovely, and a very good teacher! That you for all the details-and your art is stunning!
@TillyDouglas3 жыл бұрын
Thank you so much for your lovely comments Pam! 😊 🌹
@Sylvia-Storm6 ай бұрын
Very informative. Thank you.
@marialeitner17913 жыл бұрын
Thank you for a wonderful, informative and easy to follow tutorial! I'm a fan.😊
@TillyDouglas3 жыл бұрын
You've very welcome Maria! Thank you so much for your lovely comment. 🌹 😊
@CheriPiquedArt4 жыл бұрын
Thank you so much for this tutorial, I have yet to try tiles, but hope to do soon!
@TillyDouglas4 жыл бұрын
You're very welcome Cheronda! I hope you have lots of fun doing them!
@mirnadls60073 жыл бұрын
Hello , if Ian not wrong this is the first time , I comment to you and I just want to thank you for this incredible tutorial about resin it’s being so helpful to me. You know what I did resinned a set of 4 tiles and don’t know what was wrong but all of them dried with kind of holds or empty spices , I hope you understand my point could please tell me what is that I not doing properly.❤️
@TillyDouglas3 жыл бұрын
Hello Mirna, you're very welcome, I'm so pleased it was helpful for you. When the resin makes holes or pull back from the edges, it often means there is some sort of oil on the surface before you resin. It could be that you used silicone oil in your paint, or perhaps just oil transferred from your fingers. If you used silicone, then you will need to clean the tiles properly before you add the resin. If that is not the case, then it could well be the natural oils in your fingers, so give them a wipe over with some alcohol on a soft cloth, and then avoid touching them with your ungloved hands before you resin. 🌹
@mirnadls60073 жыл бұрын
@@TillyDouglas oh Tully thank you very, very much for answered my concern it is so much appreciated for me, I hope that I learned and next time u will give you the good news. God bless you❤️
@TillyDouglas3 жыл бұрын
Good luck with your next resin project Mirna, please leet me know how you get on. God bless you too ♥️ 🌹
@mirnadls600710 ай бұрын
Thank you so much for your answer Tilly🙏
@donnaboucher6842 жыл бұрын
ty great video I love them they r beatiful and love what you did on the back ❤
@TillyDouglas2 жыл бұрын
Thank you so much Donna! 🌹
@queensweet5900 Жыл бұрын
Nice lovely to hear yiyr friendliness but plez consider more editing trimming tutorials cutting the time down on these vids..helpful to the viewers..I try my best to forward ahead and stop to watch imperatives..thanks for considering
@lisakicklighter33952 жыл бұрын
Love your video… very well explained.. thank you
@TillyDouglas2 жыл бұрын
Thank you Lisa, I'm so pleased it was helpful! 🌹
@nathaliechapleau2732 Жыл бұрын
With this resin, are the coasters heat resistant? Hot cup of coffee or tea won t damage the top surface? Thanks for the great video
@elenabrent18614 жыл бұрын
Thank you so much, Tilly for another fantastic video lesson! 💞💕💗🌹💐🌺
You're welcome Kimberly, I hope you found it helpful. 🌹
@franmccambridge62122 жыл бұрын
Hi Tilly, thank you so much for such an informative video your tiles look lovely. Have you any suggestions for an alternative to resin ? I too am in the UK
@samd71463 жыл бұрын
Thank you so much for this. Such a great tutorial. I have some resin on order and now I feel well equipped to do my coasters when it comes. 🙏🏼💕
@TillyDouglas3 жыл бұрын
You're very welcome Sam! I hope it all goes well for you. 😃
@daisydaisy33162 жыл бұрын
Did you manage to test these with a hot cup in the end? Would the resin work on dry mod podge?
@allandavidson91763 жыл бұрын
Beautiful . Lots of information.. Thank you. Glenis
@TillyDouglas3 жыл бұрын
You are so welcome! 🌹
@sylviajohnson3733 жыл бұрын
Can you show us how you paint your coasters please they are so beautiful. I love your videos so very much.
@TillyDouglas3 жыл бұрын
Hi Sylvia, thank you so much! I have got quite a few videos showing how I paint my tiles, so just have a browse through them. 🌹
@doveydeath3 жыл бұрын
Love this so much! And your art is so beautiful
@TillyDouglas3 жыл бұрын
Thank you so much!! 🌹
@marywaspe4 жыл бұрын
Thanks so much love the tiles and great information. ..
@TillyDouglas4 жыл бұрын
You're very welcome Mary, I'm so pleased you liked them! 😃
@paulettekinasewich63052 жыл бұрын
If you use alcohol ink for your application- you then spray with a sealer - do you still use the alcohol spray before putting on the resin ?
@TillyDouglas2 жыл бұрын
Yes absolutely Paulette, the alcohol spray with help remove any specks of dust and finger prints.
@skylyon3 жыл бұрын
So so so helpful, thank you!
@TillyDouglas3 жыл бұрын
You're so welcome! 🌹
@Daemonforce-Gaming Жыл бұрын
Awsum video thanks hun x
@carolinegilbert93763 жыл бұрын
Thank you so much for this great video!!!
@TillyDouglas3 жыл бұрын
You're very welcome Caroline, I'm so pleased it was helpful!
@FarmerC.J.6 ай бұрын
Thank you! New subscriber!
@margiedurham6502 жыл бұрын
Do you have a tutorial showing the pour on these and the colors,These are beautiful.
@TillyDouglas2 жыл бұрын
Hi Margie, thank you so much! 🌹 Yes, this is one of the videos with these exact ones. kzbin.info/www/bejne/jaW9gGlti5mLpqM
@birdiepareagle Жыл бұрын
Thanks - I have a question - when I apply resin sometimes it drips over the edge and when it sets there are deposits of resin on the edges. How do you avoid having this happen???? thanks
@eileen.3333 жыл бұрын
Super helpful!!! Thank you 👏🏻
@TillyDouglas3 жыл бұрын
You're so welcome! 🌹
@shirlkehler72247 ай бұрын
How did you do the painting on the coasters before using the resin
@jensenbabbie24153 жыл бұрын
Yout tiles are simply beautiful! Do you have a video making ones like those?
@TillyDouglas3 жыл бұрын
Thank you very much! I have several videos of doing painting on tiles, but the gold ones are in this video kzbin.info/www/bejne/jaW9gGlti5mLpqM
@bhorvath42084 жыл бұрын
Thank you. Very helpful.
@TillyDouglas4 жыл бұрын
You're welcome, I'm so pleased it was helpful!
@cbrm30672 жыл бұрын
Hi Tilly. Thanks for the video very helpful. Was wondering where you get your tiles from, they look like 4x4s which is what I'm after. Thanks.
@TillyDouglas2 жыл бұрын
Hi, I'm so pleased my video was helpful! 🌹 I got my tiles from B&Q, and yes they are 4x4, but I think they've stopped selling them now 😔
@shirlkehler72247 ай бұрын
Can I put resin on top of wood coasters that have been decopauged
@rango_unchained2 жыл бұрын
Great instruction, very helpful! I'm wondering, have you tried automotive clear coat spray on any of your art?
@TillyDouglas2 жыл бұрын
Thank you very much! The only automotive spray I have used is the engine heat resistant spray, which works great for using on coasters.
@Divinetraveller11222 жыл бұрын
Such a great video! Have you ever used a photo? If so, would it be the same process? Attempting to figure out if I need to glue the photo first or resin the photo on and then resin over it? Thank you!!
@TillyDouglas2 жыл бұрын
Hi Alex, thank you very much! Yes I have used photos and they work really well, but you do have to completely seal the photo with something like ModPodge first, otherwise the resin will soak into it and leave it looking water damaged. Make sure to seal the edges as well as the front and back of the photo. Afteer it has completely dried I add a thin layer of resin to the tile and place the photo on the top making sure there are no air bubbles under the photo... Then add another coat (or more coats if needed) 🌹
@Divinetraveller11222 жыл бұрын
@@TillyDouglas thank you so much for getting back to me. Do you have any recommendations for modpodge? Thank you again!
@violamichail12914 жыл бұрын
Thank you very much .very helpful
@TillyDouglas4 жыл бұрын
You're welcome Viola, I'm so pleased it was helpful!
@violamichail12914 жыл бұрын
@@TillyDouglas ❤😍
@annashyfrina52512 жыл бұрын
Hi, I love your videos and follow them a lot. I can’t get this process to work. My finished tiles have blemishes and dips and welts on them. It happens almost every time. I tried using less resin and using more resin. I tried to spread it with sponges, brushes or just my finger and I can’t figure it out. Do you have any suggestions ?
@TillyDouglas2 жыл бұрын
Hi Anna, have you used any oils at all in your paint? If you have, you will need to clean that off properly before you can resin ... There are lots of videos showing how to do that. Make sure you clean them with alcohol, and then make sure you keep gloves on when you handle them, otherwise the oil will transfer from your fingers. Good luck, I hope these things help.
@Smithy28 Жыл бұрын
Thank you Tilly for this very informative video posted a couple of years ago ☺️ I have dimples on the ones I did yesterday so I will have to apply a second coat. Please tell me how long to wait before I sand them?
@barbaracock75223 жыл бұрын
Love your video thank you. I've had so much trouble with my resin on MDF but now prepping it properly, I hope! I wanted to know whether you pre coat your tiles before cleaning with alcohol (did you use Surgical Spirit?) and then applying resin. Will continue to watch and learn!!
@TillyDouglas3 жыл бұрын
Thank you Barbara! I don't pre coat my tiles and I used Isopropyl alcohol to clean them... I hope you have lots of success and fun with it. 🌹
@nicholeb98652 жыл бұрын
Great video! What and where did you purchase the white square things you placed your coasters on before pouring resin? Thanks
@TillyDouglas2 жыл бұрын
Thank you very much Nichole! They are just yoghurt pots that I stood them on. 🌹
@nicholeb98652 жыл бұрын
@Tilly Douglas oh ok thank you so much. That was a great idea. Can't wait to try your method because I struggled with coasters.
@foxden11263 жыл бұрын
I spray my plastic or puppy pool I use before pouring or spinning. Paint peels off slick.
@TillyDouglas3 жыл бұрын
That's a great idea Brenda! I have a puppy pool that I use for spinning too, it sure does save a lot of mess!
@farahclay9122 жыл бұрын
Very nice tutorial, thanks for sharing! I just resined 4 round coasters made of white cement. 2 of them are looking fabulous and 2 of them look like the resin retracted on the edges and left the edges with no resin at all. I only discovered it after 3 hours or so. What could be the problem? Thanks in advance for responding.
@TillyDouglas2 жыл бұрын
Thank you very much!It could be that they had oils from your fingers on the edges... Or possibly you didn't use quite enough resin. Did you clean the tiles with alcohol first? 🌹
@farahclay9122 жыл бұрын
@@TillyDouglas I did not and it could well be a valid reason. Thanks:)
@iyengaryogawithstacie27613 жыл бұрын
Thank you!
@TillyDouglas3 жыл бұрын
You're welcome!
@julieheward98523 жыл бұрын
Thank you👏👏👏👏💞💞💞
@TillyDouglas3 жыл бұрын
You're very welcome Julie! 🌹 💜
@julieheward98523 жыл бұрын
Hi Tilly how did you get on with the heat test on your coasters. When I've looked for the resin there was one 50/50 and the other one was a big bottle and a small what is the difference 🥺 where did you get your stamp for your🤔Thank you so much for teaching a thing or two 🌹 love you lots 💓 xxo
@TillyDouglas3 жыл бұрын
Hi Julie, I don't think that resin is particularly good with the heat test, although they do claim it is, I disagree! The resin that I prefer to use is called Craft Resin. With the resins, some are a 50/50 mix, but others are 60/40... It really just comes down to the brand. I got my stamp from Zazzle, there's a link under the video for that... They are great because you can completely personalise them on their website, and it's very easy to do. 🌹 ❤️ xx
@julieheward98523 жыл бұрын
Thank you so much 🥰
@lizlundgren79842 жыл бұрын
Now after you resin them, you have to wait 3 weeks before you can use them?
@TillyDouglas2 жыл бұрын
Yes that's right Liz. At least it is with most resins, so check with the brand of resin used.
@lindalambert30774 жыл бұрын
Hello nice to see you I’m in the U.K. too. Iv had terrible trouble getting something that’s heat proof for my tiles with no luck but the price of the one you are using is too expensive for me. Can you recommend anything cheaper.Also do you use Floetrol and where to get it in the U.K..It’s so nice to get help and ideas from someone in the U.K. Also where do I get the alcohol Thankyou
@TillyDouglas4 жыл бұрын
Hello Linda, my fellow Brit 👋 I have seen this craft resin, but I haven't tried it yet ... If you use this link, you will get 10% off your order craftresin.refr.cc/visualsense and their prices are very reasonable! This is what they say about the temperature of their resin... "The maximum temperature that cured Craft Resin can tolerate after 21 days of curing is 200F or 93C." ... So that should work nicely for coasters, but as I say, I haven't tested it yet. I do use the Australian floetrol, but only for the bloom cell activator, as it is very expensive... I buy that on Ebay, and have to import it from Australia. If you check the links under my video, you will see my Amazon links, most of the bits and pieces I use are on there, including the alcohol.
@Caco3572 жыл бұрын
Tilly just lovely and well done. Do you have any tips for adding photography to tile or glass followed by resin? Paper photos (I'd think?) would ripple and I'm wondering if you've worked with decals?
@kendrawillett24363 жыл бұрын
Any tips on getting it evenly applied? I had trouble with so.e of my edges being thin.
@TillyDouglas3 жыл бұрын
Hi Kendra, perhaps use just a little more resin on them, make sure the tiles are completely level and spread the resin around with your gloved hand. I prefer to move the resin with my fingers because I can feel where there needs to be more, or less, resin.
@veradomazetis36383 жыл бұрын
Hello, thank you for the video. I've tried to resin coasters for the 1st time, after about a couple of minutes after pouring the resin on top it started to separate from the edges I'm not sure why because I cleaned it off with rubbing alcohol really well twice as I did use silicone oil in the acrylic paint and it still separates . Can you help me out with this?
@TillyDouglas3 жыл бұрын
Hi Vera, your problem is almost certainly caused by the oil you used. You will need to clean all the silicone oil off before you attempt to resin them. Try using corn starch and rub it in really well, then brush it off and wash it, then repeat as many times as you need to. This is the reason I never use silicone oil.
@CareKen2 жыл бұрын
What do you use the drips for? Just curious bc I don’t like to waste things. LOL
@TillyDouglas2 жыл бұрын
I never throw any of the drips away, I use them in mixed media projects and art journals mostly... I just can't bear to put them in the bin. 😊😂
@pegsquilting1042 жыл бұрын
Can coasters be saved if you didn’t alcohol them before applying resin and it pulled away from the edges?
@TillyDouglas2 жыл бұрын
Yes, you can sand them, (do it outside and wear a mask because resin dust can be dangerous) then clean with alcohol and give them another coat of resin.
@ronac90092 жыл бұрын
I'm having trouble on a few of them with the resin pulling back from the edge. What am I doing wrong?
@TillyDouglas2 жыл бұрын
Hi Rona, it could be that you have oil on them from your fingers, so make sure to give them a really good lean with alcohol before you resin them, and make sure to wear gloves so you don't transfer more oil onto them. It could also be that you're not using enough resin... Or it could be that you haven't got them completely level. 🌹
@darlene68792 жыл бұрын
Two of my coasters that I put epoxy on got fisheye or divots, how long should I let the first layer sit before I sand it down to add the second layer?
@TillyDouglas2 жыл бұрын
Hi Darlene, I don't know if you have sorted this yet, but you could try giving them a light sanding, then a good clean with alcohol and do another coat.
@darlene68792 жыл бұрын
@@TillyDouglas I will try that, thank you so much.
@darlene68792 жыл бұрын
@@TillyDouglas yayyyyy it worked, thank you so much. I forget how long to let it cure before using them.
@darlene68792 жыл бұрын
@@TillyDouglas it worked so good but now I have lines in the resin, not real deep.
@keneishas61483 жыл бұрын
Beautiful! Where did you get your tiles from?
@TillyDouglas3 жыл бұрын
Thank you Keneisha! I'm in the UK and I got them from B&Q, They are a box of 26 and are 4 x 4 inches
@keneishas61483 жыл бұрын
@@TillyDouglas Thank You!
@ronac90093 жыл бұрын
Does the resin you use work for hot drinks also?
@TillyDouglas2 жыл бұрын
No, it certainly didn't pass the hot cup test...Which I was quite disappointed in. 🌹
@jensenbabbie24153 жыл бұрын
How long does it need to cure before adding cork?
@TillyDouglas3 жыл бұрын
I would typically leave it for at least 24 hours.
@valeriejoy113 жыл бұрын
what do you use the resin drips for?
@TillyDouglas3 жыл бұрын
I mostly use them in collages
@jennifercooke22733 жыл бұрын
what resin are you using/can it withstand hot drinks
@TillyDouglas3 жыл бұрын
The reason I made this video is to answer questions that I get asked a lot.... It saves me a lot of time this way. Did you watch it?
@jennifercooke22733 жыл бұрын
@@TillyDouglas No that is why I asked. Thanks
@jaynestevens85693 жыл бұрын
In your videos, what do you use to hold the coasters when you are painting? It appears that you are holding the coaster from the back, not the sides...
@TillyDouglas3 жыл бұрын
Hi Jayne, I use a piece of duck tape folded in half and stick the 2 ends to the tile to make a tab
@jaynestevens85693 жыл бұрын
Thank you for that info! This is the first time I watched your videos and I'm very impressed. Thank you for sharing your tips with everyone. 🙂
@TillyDouglas3 жыл бұрын
You're very welcome Jayne! Thank you for your very kind comment! 🌹
@tamicassity9943 жыл бұрын
How long should my tiles dry before I can resin them?
@TillyDouglas3 жыл бұрын
Hi Tami, I leave mine for about 3 weeks... I know there are some people that don't think you need to leave them that long, but any amount of dampness left in the paint will ruin the resin.
@uncledan85884 жыл бұрын
Thanks for the great tips! I had trouble hearing you though. Maybe wear a microphone for the next video?
@TillyDouglas4 жыл бұрын
You're welcome Dan! It's a shame you couldn't hear me, because I was ever so interesting! 😂 😂 😂
@matyasnoemi87683 жыл бұрын
Do you use rubbing alcohol in the end?
@TillyDouglas3 жыл бұрын
I'm not sure what you mean, ... in the end for what?
@matyasnoemi87683 жыл бұрын
@@TillyDouglas end of process. So do I need to clean the top with alcohol, like the varnish.
@TillyDouglas3 жыл бұрын
You can if you want, but you don't need to.
@CareKen2 жыл бұрын
I followed your instructions and I think I’ve done something wrong. There are bumps in the surface starting to show up as it’s drying should I try to fix this or do I trust the process? Ugh.
@TillyDouglas2 жыл бұрын
I don't know if you have sorted this yet, but you could try giving them a light sanding, once dry then a good clean with alcohol and do another coat.
@RainDropps Жыл бұрын
My tiles are painted with alcohol inks so I won't be able to spray with alcohol to wipe up any oils. I'd ruin my painting. Thanks for sharing
@deborahcollard96392 жыл бұрын
Tilly, you sent me a 10% off claim code for the resin and I accidentally deleted it!!! Any chance you can send me it again please, I’d like to order some of the resin? Thank you
@TillyDouglas2 жыл бұрын
Hi Deborah, I haven't got another code for 10% off this one now,.. But the resin I've been using lately is Craft Resin, and you will get 5% off if you use this affiliate link craftresin.refr.cc/visualsense
@deborahcollard96399 ай бұрын
Thank you@@TillyDouglas
@donna7338 Жыл бұрын
About the respirator, yes, you could wear it during the demonstration. You would do a voice-over after the tutorial. Protect your lungs.