1000HP 2JZ RZR swap Part 3! Will the Supra engine FIT?!

[@SXSBlog]

2JZ in a RZR. Great project or greatest project?

[@shaunleeman7161]

It's the only project

[@waynehicks317]

Yes

[@kylemorris5180]

I just wanna know if you guys are ready for 2 step inches for your eardrums ?

[@SLEDNXS70]

better than a diesel-powered one that sits on 40's.

[@sirforsa]

It's the 2JP, come on dudes =)

[@t2618-z8i]

Respect to doug.From what i can see that dude is always on the ball when it comes to the SxS 👏❤

[@SXSBlog]

He's not not on the ball.

[@DUBYA-DUBYA]

He is a very talented/smart dude. Wouldn’t be surprised if he could do auto body work and he probably built his own house. So jealous but hats off to battle dad for raising 2 motivated smart boys.

[@t2618-z8i]

@@DUBYA-DUBYA 100% hahaha. And he raised his kids to perfection 😂😂

[@bayareatech]

Do appreciate the updates but might help with views if you included some timelapse sections that showed some of the work being done. I know some of us Mechanically oriented folks would enjoy that. Things getting built keeps me glued to the screen I know it would others aswell. 🤙

[@betoborba3329]

Bayareatech was thinking the same

[@SXSBlog]

It's been really tough to incorporate that but we can in the future.

[@Jizden_Mipanz]

@@SXSBlog I can imagine timelapse being a bit difficult due to the fact that there is probably a lot of chin resting on fist between steps to make sure it's right. This is not a straight forward project by any means. However, it is straight batshit awesomeness!

[@brianfeatherstone7804]

Have you guys thought of what you are going to do between motor compartment and Driver in case motor let's go? I'm sure you have but havent heard anyone say anything about it! Would hate to see anything happen to you guys! Awesome build and watch religiously!

[@bradrichardson9774]

Yes I agree with this statement Bayareatech.

[@tnross23]

I have a similar set up, it’s a mid engine rail with a big block Chevy and a power glide mounted directly to a corvette C5 diff. Might be a cool race for silver lake or u guys event. And ya I think this is a great first build for the new shop! Great update video!

[@harrisonremedios8430]

I highly recommend a pretty sturdy firewall from harness bar to floor. You wouldn’t want a rod blowing through the block and only having that 1/32 aluminum of the Kirkey to save you

[@off-roadworld6785]

This is just awesome to see. From the og mav, and wildcats. Cant forget 900xp sous, you guys have come a long way. As far as I'm aware, you guys are one of the pioneers of the offroading/vlog style channel. Definitely the reason I started lol.

[@SXSBlog]

Just doing stuff with our friends lol

[@off-roadworld6785]

SXSBlog.com overall... good channel😂

[@tyler5903]

I love seeing the excitement on Dougie's face!! He's a master mechanic!! You guys represent us Michiganders quite well!!

[@Rusty.1776]

Thank y'all for taking on this build, I can't wait to see it finished!

[@WvTrailN]

Going to be the baddest thing around!! Love this project!! Can’t wait!!

[@chakadog100]

Cant wait to see this thing with paddles on it ripping a wheelie across the entire desert at 100mph+!

[@SXSBlog]

So excited for that😎🇺🇲🇺🇲🇺🇲🦅🦅🦅🦅

[@chrisrogers4724]

NOooooo! Mooonicaaaaaa! (ja rule voice)

[@cecilfrench2238]

So happy y'all built cletus's side by side if not I would not have found y'all's channel really enjoyed the contents and the learning experiences Doug is a mastermind he is like the mad scientist lol

[@cecilfrench2238]

If you think Doug is a mad scientist give me a hell yeah brother

[@woofersd2383]

What an awesome build. Then right into a 3/8th mile circle track SxS.

[@dagrumpz8661]

I am so excited for this! Ready to hear 2J noises! Heck yeah dudes!

[@SXSBlog]

Same here brother, same here.

[@BobbyB910]

So being honest the only reason I subbed was cleetus but now yall got my attention with a 2j sxs

[@jchap9115]

Man all I can think of is just be safe as y’all can be. This machine will be dangerously awesome

[@Richdaddye]

Wow! That is exciting to see the motor in there!

[@oztexs1440]

Most of the success comes from Doug's positive attitude !

[@jasonbell4670]

This will be the unit of all units. Im just as excited as you all are about this project!! Heck yeah dude!!👍

[@brandonc4897]

Heck yeah dudes. Great work Doug! Douggie fab videos are some of my favorites.

[@raulsilver3294]

Another day another Doug, looking good guys

[@randystull1502]

Sure sounds to me like you plan on bringing 2jp to cleetus and cars indy.....I can only hope this is a reality!

[@SXSBlog]

Things might be happening, we're trying to do them.

[@calvinpettet8007]

Indy cars. When

[@Koromose]

@@calvinpettet8007 April 18, 2020 - Cleetus and Cars Indianapolis, IN - Lucas Oil Raceway

[@samiparkkinen801]

This, is the best kind of ridiculous stuff on the internet! Super excited to see this project moving forward!

[@SXSBlog]

Thanks bud, we appreciate it!

[@mdelgado8386]

I seee SXSBlog I click I click like

[@redbitter1232]

Doug is a genius. Can we have a little background on this guy.

[@DUNEATV]

I can’t even imagine how much a project like this would cost! 💰

[@SXSBlog]

Overall... Not cheap lol.

[@CascadingDream]

$43

[@mckrackin5324]

@@SXSBlog About tree fiddy?

[@gerneticut]

Lol 350 is the exhaust manifold if you get a great hookup

[@DUNEATV]

mckrackin5324 Lol

[@jaredhess3482]

Air to water intercooler placement is so simple yet genius. I love that you guys can help with ideas for my own builds. PS could be an option for the yxz + some meth.

[@SXSBlog]

Lol anytime bud

[@ATVtherapy]

Great job guys! Would love to see another awesome mud build next!

[@ismaelmarrero8377]

Love the JP2JZ RZR this is going to be a killer ride can't wait to see what the SXSBLOG.com team is going to do with the JP2JZ RZR a big tums UP to all the SXSBLOG.COM team.

[@Tampaboys]

Great build so cool to see this thing coming along so sweet. Epic Build

[@tomaxxxx536]

Dam Mike gotz some mad welding skillz!!!

[@sjohnstone11]

Sick! Couple ideas: Rear facing intake? Could help with packaging and also may help with dust intake into the motor and with the door bars keep in mind elbow room. Tight packaging in a rig like this! This thing is going to rip!

[@joesilvasr9733]

This by far the COOLEST, WILDEST, and most AWESOME UTV project that I have ever seen on KZbin and real life too now that I think about it. I am SUPER impressed that you guys chose to do a unique engine swap as well. That decision took this project to the NEXT LEVEL👍👍👍💯💯💯🇺🇸🇺🇸🇺🇸.

[@SXSBlog]

Thanks bud, it's been a lot of hard work, but we're super excited to get this thing fine and ripping.

[@phantomx55]

RIP anyone who goes against 2JZJP this coming Racetober

[@TheFightInsideTheFighter]

phantomx55 why had this not crossed my mind at all lol beast mode will look like a power wheels compared to this thing

[@SXSBlog]

That's the goal for everywhere we bring it 😎

[@techs1smh13]

Ford 9" and powerglide 8 k stall. trans brake. That's what Doug needs.

[@techs1smh13]

U going to use 930 Porsche CVS and hubs brakes etc etc

[@jamesglenn2006]

Getting stuff done Doug, gonna be ridiculous 👍🍻

[@matt-roden]

Jesus Tap Dancin’ Christ. This has to be the best worst idea I have ever come across. You guys have lost your marbles this time and I love it. How anyone could drive this without being at full pucker the entire time is beyond me. Definitely deserves every heck yeah dude in the history of heck yeah dudes.

[@Boosted_Tractor]

🕺🕺 I think the RZR needs 35 inch paddles front and rear and watch it dominate race day

[@SXSBlog]

32" actually lol

[@boydco6587]

@@SXSBlog I would recommend Sand Tire Unlimited 36"....your going to need the traction and the drivetrain will more than handle them. Plus you can run alot of droop in the chassis and still have plenty of ground clearance.

[@mckrackin5324]

Two wheel drive though. Needs weightless front runners and 14 wide rear paddles ;)

[@bigmitch1914]

Don’t know if I can wait 2 days for next episode. Heck ya dudes can’t wait to see this thing done.

[@norm1233]

Holy shit Doug did a excellent job on the cage

[@codynorris247]

Can’t wait to see you guys in Indy!!

[@bwyyy7306]

Would have been nice to see Mike do some welding, maybe a little how-to info from him

[@rustyshacklferd1829]

Loving the build!

[@michaelmessner3169]

Holly chit! This is Mad Cow Cool team. Just absolutely amazing, such a great build. JP transformation right before our eyes. Maybe in this planing faze think about a fire suppression system to help with a fire issue and a turbo shutdown plate in case of a run away. Looking forward to the cool wheelie bars. DAMN SON, do work!

[@SXSBlog]

If we move forward fast the fire will be behind us. no worries!

[@jakedibbert316]

lovin this build dudes. Doug you kick ass nuff said...

[@SuperLopez101]

HECK YEAH DUUDES !!!! cant wait to see this puppy done.

[@larrytemen4789]

Great job guys! I know first hand how much work this is. I’m doing something similar only in a notchback mustang. Not a 2jz. A voodoo

[@aaahtex902]

**DOUGGIE = DA MASTER of da SXS!**

[@danpaegel7339]

Very nice next project needs to be a super tall mud busting SxS

[@wannabejeeper]

Build a big "X" behind the seats. Floor to roof. Wouldn't hurt to put one in the roof, and between the C pillars too. You want bars to end at a node so the load can be transferred. The current roof bar doesn't meet any intersections; it's not doing much in an impact. If you're doing intrusion bars, make a V in the roof that starts together at the top of the intrusion bars and spreads to meet the B pillars. I know looks matter, but at that HP level yous need serious protection.

[@danielgrantcoleman]

Putting a godzilla motor in a t rex frame. What an unholy union. This is going to be sick. Super quality on everything you guys do. 👍

[@AnN-py2em]

You guys need some more lightning in that shop

[@Schiada95]

Looking great guys looking forward to the next video 👍

[@robb.7078]

When is Sous going sxsblog full time? Love the commentary he adds!!!

[@jimharris8579]

CANT FUCKIN WAIT FOR JP - THIS UNIT IS GOING TO BE - F.A.S.T - 💯

[@Nwflyingsolow]

When Doug steps back and says it gonna work.

[@rickyde0255]

Very excited for this project.

[@fabricationnation8052]

I love seeing amazing creations and specialty products.....were not the only ones thinking up crazy stuff

[@maxallout99]

I love these vids brotha! Always looking forward to see your guys vids💯

[@borrego9241]

Lower seats, a CG improvement. A dry sump, an even bigger CG improvement - plus lube security and better thermal control from snow to dunes. AND CHEAP! Who wouldn't? . . . OK, Roadkill wouldn't :)))

[@RustbeltMechanic]

Lookin supra awesome!😂🤘🏻 I’m most excited to see how the exhaust pans out. Should have a boost activated baffle bypass for the muffler.

[@SXSBlog]

Kinda punny....

[@RustbeltMechanic]

SXSBlog.com womp womp

[@86allaboutcars]

Man that is gonna be a sick unit. When you get it running you should get ahold of Brent from PFI and have him tune it. Pack it up and go to Colorado and watch him Work his magic.

[@ononewheel7]

This is gna be awesome! Great work guys!

[@donnburge1692]

was thinking about how a rotory would be like in the mystery machine, the seem small and compact

[@SXSBlog]

Yeah they are, but the 2J is mo betta 😎

[@donnburge1692]

@@SXSBlog MO better thats what I like to hear, can't wait to see the finished monster..

[@AZBADBOYz]

Zoom zoom boom

[@Koromose]

@@SXSBlog a 3-4 rotor 13b would be insane. It would sound so good, but I'd bet it'd cost twice as much as the 2jz

[@ChadSmith305]

The shop is lookin so sweet with all the banners and tools and stuff moving in... I still have reality checks every now and then like damn these boys have a huge shop now!!! Pretty sweet 👍🏻

[@SXSBlog]

We have the same lol, still don't seem real

[@ChadSmith305]

@@SXSBlog just don't start selling merch on the side of 75.... I'll never get up to 222 without spending half my paycheck lol

[@tomasfelix7605]

Hell yea man, getting shit done!

[@rockhoundhunter9657]

Heck dudes this is the best build on KZbin ! Frickin guys are badasses

[@paulcook5233]

Mad scientist at work, Love it!

[@brianjacobs1241]

This2JZ idea is the most awesome thing I’ve ever heard I am so excited to see this done please max out the power on it with a big turbo if your going to go all out go all out

[@SXSBlog]

Turbo is a big one ;)

[@hendersonlandworks6158]

Looks awesome guys! Don’t forget locations for fire extinguishers!! And I would put a aluminum heat shield between the seats and engine

[@hendersonlandworks6158]

(heat shielding/fire wall)

[@mdelgado8386]

I’m digging this build

[@tbonedude1]

Lunch time just got so much better! Heck Yeah Dudes!!

[@loganmccracken3704]

Hell yeah brother!!

[@dakotalayinlow]

that thing is going to rip so hard!

[@robertmacneil7133]

Mid engine 2j.... might want to add a spot to put weight out front, try to keep it low. James told the boosted boys how to set up front weights well.looks amazing so far. Doug is my hero

[@SXSBlog]

She'll be fiiine

[@okcmoparguy724]

Take a minute and show off that new weld/fab table sometime.

[@ethann1515]

OKC MoparGuy I wish they would show them working on it

[@richardgreen886]

Omg guys, if you could get it finished for Cleetus and Cars @ indy, that would steal the whole show!

[@treygillis3530]

Can’t wait to see you guys rip it a cleetus and cars and go down the drag strip

[@davejacobs1717]

Awesome build can't wait

[@randallbernard2074]

I've got warm fuzzies all over.... I think it will be the same caliber as a sand limo , mabey less weight but close to the same power level. The power to weight ratio will be insane, as long as it can hookup... You guys are awesome

[@Epictiger_10]

Can't wait until it is done

[@kylegohawks8604]

Living the dream. Living the dream. Wish I had this much time

[@d26-i4b]

great bunch of guys keep up the hard work you will soon be at 1 mill subs

[@SXSBlog]

Wouldn't hate that lol. Thanks brother!

[@brentrobinson3274]

Looking great can't wait to see more

[@archstanton9206]

The long nights thinking are proven well spent, Doug. Definitely need to keep the winch for giggles. Have you looked into upgrading the brakes?

[@SXSBlog]

On the list, got a bunch of things that need to be done.

[@danpmatz]

Man this thing is going to be SICK!!!

[@Zacyz125]

get you a special someone that looks at you like sous looks at doug at 0:29 - 0:35 lol

[@3pedalpodcast]

Please...... Honestly, this needs to happen! 👏🏼

[@TheSupraman2jzgte]

This is the best thing i have ever seen.. You guys need to name it "Deathasaurus-REX"

[@chevy35c]

There we go! Now we have some progress to watch! This is a video worth watching. Not like watching one pipe get bent like last time Lol

[@SXSBlog]

Pipes are being bent, Doug is doing it.

[@brettbaratheon9776]

Freedom Factory- Cleetus SXSBlog.com - Doug, Nick, Sous Demolition Ranch- Matt The ultimate Cleetus and Cars event and burnout collaboration! Make this happen please! 🇺🇸🇺🇸🇺🇸

[@apascarelliful]

Doug is the man! Love whole crew but Doug, holly smokes

[@jastark22181]

That is going to be soooo sick!!

[@matad311]

So i really hope i get to see this ripping at Silver lake this summer!!!

[@SXSBlog]

It will be there

[@matad311]

@@SXSBlog Now i am even more excited for this dang build to be complete!

[@URBANAMERICANTAC]

I hope that thing is getting that cool E-Brake set up that Cleet got on his.

[@SXSBlog]

Will probably have something for it.

[@JACjeeper]

I’m surprised theboostedbois didn’t talk you guys in to a k24 swap. 😂

[@Spectre_Racing_689]

the song at the end is powerful, also you guys are soo cool good luck on the 2JZ

[@tylernutter6658]

You guys should come to Iron Horse Mud Ranch May 15-17 for their ATV only event.

[@gal_5167]

Can’t wait to see this thing on glamis dune. And I think you should keep the Polaris style.

[@mckrackin5324]

Weird notifications lately. You guys are building a hot rod and talking parachutes while Cleetus is driving his SXS on two wheels. Great mix up. lol

[@SXSBlog]

Unreal eh lol

[@spun3600]

you guys are nuts, love it!

[@ROMPE_NALGAS_24-7]

I HIT THE LIKE BUTTON BEFORE I EVEN WATCH THE VIDEO 👍👍👍👍👍👍👍👍👍👍