Working on the Bridgeport: Boring the Kingway Castings Part 2

[@leeklemetti1887]

An interesting operation. I would call the part a "Kingway cross rod mount".

[@jackpledger8118]

Interesting to see the Kingway come together. I've never seen one in use.

[@joekanicki5306]

Success! Looking forward to the next stage. Stay well Steve.

[@waynep343]

Nicely done. I always wanted to have a deburing tool with the extendable shank as a ball swivel nut driver tool set. Mostly in 1/4, 5/16 , 6mm, 7mm 8mm 10mm for hose clamps .

[@EitriBrokkr]

Huh?

[@dannywilsher4165]

@@EitriBrokkr I'm thinking he is saying he wanted a nut driver with an offset like the deburring tool so he could drive nuts with the same motion as the deburring tool.

[@darrendean21]

Thanks for taking the time to show us Steve ..... appreciate it ...

[@10swatkins]

No problem 👍

[@daleschmitt2919]

Thank you

[@stevenpederson1645]

Nice outcome! There's more than one road to the end, and please don't take this wrong, but I like to bore the part before reaming or honing, and I try to use a floating holder for the reamer to make up for any misalignment in how the reamer is held vs the part centerline. Obviously I don't use a floating holder for every size reamer, I'm not a millionaire either.

[@Gjed16]

🤔 Tryin to figure out how you got the 90 degree angle indicated for the second hole.

[@fengelman]

and I want to know how he held it in the chuck

[@10swatkins]

kzbin.infolu_TMLrL9_Q

[@10swatkins]

kzbin.infolu_TMLrL9_Q

[@trentbain4988]

really like watching your video's, find them very interesting. hope ya get to feeling better and Don gets to come around. hahahahah like the laugh at the end sound evil hahahahahaha

[@mikecabe6127]

Great videos on this project Steve!!! I was wondering if these special tools will be able to help work on your 10EE when time comes to dial it in? Thanks again for take us along!!

[@10swatkins]

Yes, absolutely

[@TrPrecisionMachining]

good job steve

[@chriscraven9572]

Would have been interested in seeing the setup and drilling of the second hole.

[@10swatkins]

kzbin.infolu_TMLrL9_Q

[@fengelman]

did we see you do the second perpendicular hole?

[@10swatkins]

It was too long and I was tired... Both videos together took 7 hours of editing ... Sorry HEre is a short of aligning it. . kzbin.infolu_TMLrL9_Q

[@fengelman]

OK, I rewatched several vids and see where you said there was just enough to grab the "other" end..the one with equal "stickout".. @@10swatkins

[@danrabenhorst2549]

good video

[@10swatkins]

Thanks for the visit

[@glynnepritchard2526]

I would have used an indexable face plate on a milling machine to drill the holes.

[@fengelman]

too bad the bridgeport isn't ready yet...

[@10swatkins]

This was way easier...... HEre was setting up the second hole kzbin.infolu_TMLrL9_Q

[@johnrussell6620]

at 2:30 How about calling it a trunnion? It has the same features as a trunnion except for the offset nature of the 2 crossing axes.

[@10swatkins]

Sounds good to me... Very technical! :)