I have the On 3 twin kit & my car is the exact same color. LOL!!! Built engine, & transmission, Strange axles, K-member, Welds all the way around & has run a best of 8.42 at 165.
@danielwhiting9213 Жыл бұрын
How much did the turbo and all the necessary equipment cost for this build?
@Renzeaux Жыл бұрын
You are GOD SENT for this video! On3 instructions suck! 😂
@MattSoppa Жыл бұрын
Glad I could help! Hit that subscribe!
@ashtonmitchell1 Жыл бұрын
Been thinking about switching to this kit from my Paxton setup. Dosent seem bad really, did the ecu and fuse box have any problems with the heat? That’s the only spot that looks a lil sketch to me, other then that it dosent seem too bad for what it is.
@MattSoppa Жыл бұрын
Doesn’t seem to be. He’s been street driving it a lot and taking some kills
@SinnerzCoyote6 ай бұрын
Good video man. Would like more coyote videos
@bad89coupe8 ай бұрын
I don't think you're oil feed and return are clocked properly 🤔 aren't they supposed to be at 12 and 6 o clock?
@MattSoppa8 ай бұрын
We actually corrected it since filming
@lolz595611 ай бұрын
This was dope
@MaxSpeedshop84 ай бұрын
Sick, Im about to do one on my personal coyote, has 105000 miles on it but it should be fine right? Ive seen some high mileage coyotes out there
@MattSoppa4 ай бұрын
Let it eat!
@Ghost.mt822 ай бұрын
Where’d you get that mount in the cup holder?
@Baby-vk7lx7 ай бұрын
i have a question, i’m thinking about getting the same setup, does it come like a regular style exhaust and you have to add the bumper style exhaust or does it just automatically come with the bumper style out the box?? cause i wanna run the setup but i don’t really dig the bumper style instead would like to have my xpipe and my cat back, etc
@MattSoppa7 ай бұрын
On3 has both options
@Lava_Roush Жыл бұрын
Curious to know what is done to the other 3 o2 sensors
@MattSoppa Жыл бұрын
Deleted
@diambo4life5 ай бұрын
What a nightmare install. Def not easy for servicing.
@PothRacing4 ай бұрын
It’s not that bad. I have the t6 kit and race my car every weekend. I service it just fine after racing every weekend.
@Hardwaretuned Жыл бұрын
are you supposed to retain the factory resistor?
@MattSoppa Жыл бұрын
What resistor?
@Hardwaretuned Жыл бұрын
@@MattSoppa the factory radiator resistor in the fan shroud. U don’t use it here
@MattSoppa Жыл бұрын
@@Hardwaretuned Correct, I tied the trigger wires together for both speeds so both fans will come on
@julez17872 ай бұрын
Which port in the intake manifold did you use as vaccum to supple to the distribution block?
@MattSoppa2 ай бұрын
@@julez1787 one in the front teed
@julez17872 ай бұрын
Thanks
@RRninja-jq6lp11 ай бұрын
Did you have to delete ,,windshield washer bottle " ?
@MattSoppa11 ай бұрын
Yes
@RRninja-jq6lp11 ай бұрын
@@MattSoppa Did you find any good place to move it , or do you just run without it ? Btw thanks for reply 🙂
@MattSoppa11 ай бұрын
@@RRninja-jq6lp customer runs without it. AZ life
@liyahalex7308 Жыл бұрын
Is this how the whole kit came?! Someone just tried to make me buy the ON3 single turbo kit and I was about too. I don't think I will just because of how much they may charge me for labor.
@MattSoppa Жыл бұрын
It’s pretty labor intensive and not for beginners to instalm
@liyahalex7308 Жыл бұрын
@@MattSoppa I'll stick to my gut... Supercharger haha!
@MattSoppa Жыл бұрын
@@liyahalex7308 yeah that’s mostly just like a manifold install but even after all this work I’m considering turbo for one of my cars!
@liyahalex7308 Жыл бұрын
@@MattSoppa IN THE ARMMMMMS OFFFF AN ANGELLLLLL! HAHA Couldn't be me. I'm poor as is and I don't need my tuner fucking me more on the price.
@derekaragon97011 ай бұрын
Did you have any trouble with headers touching the ground / rubber boot on alternator
@MattSoppa11 ай бұрын
Yes. Has to delete it
@derekaragon97011 ай бұрын
@@MattSoppa delete what the rubber boot ? I’ve heard some guy said he trimmed the plastic around it and rotated it I literally had the install complete and had to pull everything back off I’m trying to come up with some solutions for tomorrow when I work in it
@MattSoppa11 ай бұрын
@@derekaragon970 yeah, I just remove the rubber
@derekaragon97011 ай бұрын
@@MattSoppa ok I keep popping the main fuse on the positive battery cable every time I try and connect the battery do you think I have a short some were or could that be from exhaust touching the rubber / ground ? I extended the MAF sensor wiring and wired up the new slim fans ? thanks for all your advice to it’s much appreciated
@MattSoppa11 ай бұрын
@@derekaragon970 sounds like you have a major short to ground on a positive cable
@SstangThang Жыл бұрын
How long did it take for install? I'm just about to do mine this weekend.
@MattSoppa Жыл бұрын
I picked at it over months on the side. I’d say at least 30 hours mainly because the instructions are shit and did a fuel system
@SstangThang Жыл бұрын
@@MattSoppa Nice nice so a full weekend is what i'm looking at thanks!
@antonygogo1184 Жыл бұрын
@@MattSoppa where can I find a list of tools required?