This Shure PGX transmitter did not power up. The problem was traced to a faulty power switch.
Пікірлер: 42
@HelmutTschemernjak3 жыл бұрын
Thank you for showing this repair including the mechanical and soldering details and your advice. Every single video helps the audience (and me) to learn something. Danke, Helmut
@oldblokeh3 жыл бұрын
A handy tip for using desoldering braid is to hold a piece with hot tweezers. The tweezers supply the heat, allow more precision and stop you burning your fingers on the braid.
@carybrewer91422 жыл бұрын
Great video. Saved $200 with a 40 cent part. Much appreciated.
@chencik123 Жыл бұрын
There is another way to fix it. You can disassembly switch without desoldering. There is only three parts inside. On the bottom of switch you have to scratch copper part to get it shiny and assemble back.
@MrDubje3 жыл бұрын
Classic failure of the part that interfaces with the human that uses it! Thanks for sharing!
@FUNKYFOOT51507 ай бұрын
Do you have a part number for the switch by chance? Or a link to it? Great video!
@LotchMuziq5 ай бұрын
Hi I have one a AKG PERCEPTION 820 mic not functioning... its powered by a remote control unit .. do u do repairs on this unit
@connguyen7319 Жыл бұрын
can you repair shure hand held transmitter U2 with transmiter short under 5'
@learnelectronics18063 жыл бұрын
Nice video sir
@mawka13 Жыл бұрын
Hello I have the same issue. Do you do repairs. I took all of it apart and just need the part put it.
@ramilyariyev81358 ай бұрын
Bunun ses qirilmasi neden olur? Ve bunun təmiri varmi?
@victorhugod38711 ай бұрын
Hello I have exactly the same problem where I can find this kind of switch??
@feedback-loop11 ай бұрын
DigiKey or Mouser
@spaghetti_man38072 жыл бұрын
I need to replace the switch on my microphone, but I don’t own any soldering tools, is there any alternatives other than paying somebody to repair it?
@djjoeybeatz2 жыл бұрын
I did the replacement in under 10 min. I have extra parts if you want me to send you the switch. Or you can remove the board and ship it to me
@ericprince2865 Жыл бұрын
@@djjoeybeatzdoes that offer still stand about the repair? Could I send you my mic I have the same issue?
@rajujeslo92912 жыл бұрын
Useful
@andymouse3 жыл бұрын
Cheers.
@cherrielam79842 жыл бұрын
Thank you for your teaching, may i have the switch part model number or this product part number from "Mouser Company"?? really i need to buy one, as my shure pgx2 transmitter cant turn on/off😥😥thank you🙏🙏🙏
@feedback-loop2 жыл бұрын
Something like this: www.digikey.com/en/products/detail/apem-inc/MJTP1106STR/2344159
@cherrielam79842 жыл бұрын
@@feedback-loop ok let me study it, thank you very much😊😊😊🙏🙏🙏
@AbdaalhMohamed-kj8ez6 ай бұрын
عندى ميك عوز شفره وكبسوله
@Aelab585 ай бұрын
Акцент вас сильно выдает!!!))
@sinesio30jesus49 Жыл бұрын
Alguém tem a placa de miclofone pra vender pra mim ?
@victorhugod38711 ай бұрын
Eu queria é saber onde é que posso encontrar esse swicher??
@EligioFlores Жыл бұрын
Sorry, How much should I charge for that repair?
@sergeymolkov320110 ай бұрын
Я так понимаю, автор канала русский😂 Наш акцент очень чувствуется. Опять же, обручальное кольцо на правом пальце.
@alieslami2321 Жыл бұрын
POINT.GUARD of X IZ..u can hear that in it AL.
@alieslami2321 Жыл бұрын
Let's see ..
@ireneroberts765927 күн бұрын
My microphone has green light on, but red light comes on now & then, that makes the sound comes on & off. What is causing this & were is the problem please? This microphone comes with a bluetooth speaker. Your help will be highly appreciated 😢
@TKomoski3 жыл бұрын
I would use a side cutter and cut the leads. Then remove the rest of the component from the board, I'm lazy that way
@feedback-loop3 жыл бұрын
I think this is more dangerous. Sometimes too much cutting force can be transferred trough the lead to the pad. At least I am afraid it could.
@TKomoski3 жыл бұрын
@@feedback-loop Your right, but if I can't normally I brute force it out/off
@HelmutTschemernjak3 жыл бұрын
Another option is to protect the area around the switch with Kapton-Tape and use a hot-gun to de-solder it, however this method means to the switch is likely to melt.
@TKomoski3 жыл бұрын
@@HelmutTschemernjak That's a Good and Other way if you have the equipment to do that
@esmailshaik1236 Жыл бұрын
Aapka no deejiye
@nicholaseastman69153 жыл бұрын
Who's else in the shop? Why do you say "we" so often? Or is this the expression of the self-esteem in its highest?
@feedback-loop3 жыл бұрын
Figure of speech. www.thoughtco.com/inclusive-we-grammar-1691053
@pateldjvaranasi92148 ай бұрын
Sar ji mera sm58 slx4 lock ho gaya hai anlock nahi ho raha hai please help sar