#118

  Рет қаралды 59,088

Stephen Ogle

Stephen Ogle

Күн бұрын

When I started turning bottle stoppers I wanted to save some money on the cost of getting started. This video shows a good method for turning bottle stoppers as accurate as any high dollar gizmo. I hope you enjoy this project.
Finishing Acrylic: • #110 Turning Glasslike...

Пікірлер: 157
@woodfreak814
@woodfreak814 2 жыл бұрын
You done this awhile ago Stephen. Love the way your not obsessed with carbides, I prefer HSS chisels myself. Good tips and brilliant work. LOve the felt tip pen colouring.
@99andycat
@99andycat 2 жыл бұрын
Lovely skills and great looking end product.
@brockdion2593
@brockdion2593 8 жыл бұрын
I know you said those bottle stoppers are awesome but sir I disagree, you are the awesome one. I truly enjoy your videos. Thank you.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you sir. I really appreciate it my friend. Glad you you are enjoying my channel. Hope I can keep you watching.
@MikeWaldt
@MikeWaldt 8 жыл бұрын
Some lovely stoppers there Stephen, and a very useful and cost effective mandrel you devised too :) Take care Mike
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you my good friend. Glad you enjoyed it.
@michaeledens8134
@michaeledens8134 8 жыл бұрын
Hay Stephen, another great teaching video. I have made a few tankards kind of like the ones you made,but carved dragon heads for the handles, and used the acrylic. I went to my key shop, and ask for some brass grinds and added them to my leftovers for pen turning blanks. looks like gold flakes. Now I will make some bottle stopper blanks and your gig to turn them on. Thanks for all the great ideas. Keep those lessons coming .I love them... Michael
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Michael. I use all kinds of materials in my acrylic blanks including the brass shavings from key makers. You are right, it does look like gold flakes. Glad you enjoyed this project and found it helpful. Take care.
@gardeningdianne
@gardeningdianne 5 жыл бұрын
Excellent work Stephen. I love it when you used your home made chatter tool, then you came in and coloured it with texta pens. Great ideas for me to use in my projects. many thanks.
@donaldtaylor8287
@donaldtaylor8287 8 жыл бұрын
Love your projects. Thanks for taking the time to put out the videos.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Don. I really appreciate that comment. Glad you are enjoying my channel.
@roberttalluto1085
@roberttalluto1085 5 жыл бұрын
Excellent. Gave me new ideas.
@gordroberts53
@gordroberts53 8 жыл бұрын
One of the things keeping me from exploring this type of turning is the high dollar gizmos that seem to be required. Thanks for setting me straight. Been too busy to get much shop time of late but back at it later this week. Good luck at the shows. Cheers, Gord
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Gord. I really appreciate it. Give it a go. Stop by the Hobby Lobby and pick up a couple of the bottle stoppers and grab a 8x1.25 threaded rod. You are ready to go. Glad you enjoyed this project.
@daletprescott3458
@daletprescott3458 8 жыл бұрын
I like the jig that you made for the bottle stoppers, it keep your hands away from the chuck. Nice job.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Dale. Glad you enjoyed this project.
@buddyboyer2274
@buddyboyer2274 2 жыл бұрын
Thanks I’m just starting and can’t wait to get in the shop tomorrow.
@davidalden5697
@davidalden5697 8 жыл бұрын
Perfect timing Stephen !!! i was just looking at a bottle stopper kit online yesterday... i believe your system will be ideal for me ! Hobby Lobby , hardware store and the Winery just up the road is all i need ! thanks again Stephen .
@StephenOgle
@StephenOgle 8 жыл бұрын
HA!! There you go. Glad you found this project helpful. Glad you enjoyed it my friend. Happy stopper turning!
@vernonator63
@vernonator63 7 жыл бұрын
That jig is genius...great video Stephen
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you Mark. Glad you enjoyed this project.
@gunterschone8402
@gunterschone8402 8 жыл бұрын
Beautiful video, Stephen. The bottle stopper look fabulous. The ideas with the paint and the flutter of iron and the markers is a very good idea, thus you can make many different patterns.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Gunter. The chatter tool is a great accessory for turning on the end grain. Glad you enjoyed it my friend.
@charlesreicks648
@charlesreicks648 8 жыл бұрын
Fantastic demo I'm sure I will really enjoy doing this. Thanks
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Charles. Glad you enjoyed it my friend.
@lenshandcraftedwoodsigns6033
@lenshandcraftedwoodsigns6033 Жыл бұрын
I am learning, lots of good information.
@johnhammond5314
@johnhammond5314 8 жыл бұрын
Thanks again Stephen and thanks for the colour idea. A nice effect. John from Australia.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you John. Glad you enjoyed this project and found it helpful..
@larrymacaluso9051
@larrymacaluso9051 7 жыл бұрын
Great to see you back Stephen, l finally decided to make the drum sander you used a while back. It looks good l need to start another segmented bowl now to try it out by sanding flat the rings. Really appreciate your videos, keep up the good work.
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you Larry. Glad you completed your sander build. You will not regret it. Just keep your hands away from the front. "Bad JU Ju) also I run mine around 1100 to 1200 rpm. Let me know how it works for you.
@larrymacaluso9051
@larrymacaluso9051 7 жыл бұрын
Well, l finally got to use my new drum sander today and it works great. A couple things deserve close attention; 1. You really need to hold on to the ring while feeding it into the spinning drum (or you'll need a catchers mit,) feed it very slow against the rotation, let the sand paper do it's job. 2. Most important; Before moving the adjustment up, pass the ring through several times until the paper stops cutting, (then and only then) move the table adjustment up in veeeeerrrrrry tiny increments. The segmented rings l made and passed through my new drum sander (at 1,000 rpm) are within .006 inch parallel. (No "bad JU JU's here) Much easier and safer than using my 12 inch disc sander, Thanks again Stephen.
@FriggOff361
@FriggOff361 5 жыл бұрын
Thats an awesome idea for the chuck! all i have is a faceplate but this will help me soo much!
@dr.duly.6926
@dr.duly.6926 8 жыл бұрын
Nice little fun piece thanks for sharing. Safe and happy shavings. David.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you David. Glad you enjoyed this project.
@lockpickingbelfast
@lockpickingbelfast 8 жыл бұрын
absolute pleasure to watch, thanks.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Jim. Glad you enjoyed it. Thanks for commenting.
@lockpickingbelfast
@lockpickingbelfast 8 жыл бұрын
+Stephen Ogle easy watching! great work.
@buckmetta
@buckmetta 8 жыл бұрын
thanks for the tips - nice job sir and beatiful musics during the video...congratulation from Brazil
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you very much. Glad you enjoyed this project.
@paggodiablo01
@paggodiablo01 7 жыл бұрын
Greetings from Downunder, I love the way you use tools, I have just completed a six cut Celtic knot. I shall use Celtic Knots in my bottle stoppers. I am also experimenting with Epoxy and glitter in the turning and it's turning out well. Great vids, tanks.
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you very much. Glad you enjoyed this project. I have used the epoxy and glitter with some very nice effects. I believe your methods will give you some very interesting results.
@martys356
@martys356 7 жыл бұрын
Nice job,great idea with the markers to add color.
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you Marty. Glad you enjoyed this project.
@IBDaddyO
@IBDaddyO 8 жыл бұрын
Looks good. I do mine much the same, except for the lacquer. Lol. Well, go get the tree limb! Mark
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Mark. Glad you enjoyed this project. Hey, the tree limbs do not turn themselves. Take care.
@malcey12
@malcey12 8 жыл бұрын
Steve, Brilliant job mate. Just might have another go my self.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Malcolm. I am really glad you enjoyed this project.
@brical1176
@brical1176 6 жыл бұрын
Hey. I'm new to turning...I love it! Great video and very helpful. I'll be tuning in. Thanks
@gulfmedic1
@gulfmedic1 8 жыл бұрын
Steve once again great video I learn a lot from your videos keep them coming, beautiful work.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you sir. Glad you enjoyed it and are still finding my channel helpful.
@davidcrandell1172
@davidcrandell1172 6 жыл бұрын
Another great video Stephen. Cheers.
@ednac1626
@ednac1626 8 жыл бұрын
Those look so nice.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Edna. I really appreciate it and I'm glad you enjoyed this project.
@icespeckledhens
@icespeckledhens 8 жыл бұрын
Excellent Stephen, I really enjoyed this video. James
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you James. I appreciate it my friend.
@bradturbo44
@bradturbo44 8 жыл бұрын
Hi Stephen, thank you for your tips re the jig nice work all the best brad.(UK)
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Brad. I'm glad you found this project helpful.
@AsWoodTurns
@AsWoodTurns 8 жыл бұрын
Great ideas - Nice result. Alan Stratton
@StephenOgle
@StephenOgle 8 жыл бұрын
+As Wood Turns Thank you Alan. That is a true inspiration coming from you.
@earlclark7024
@earlclark7024 6 жыл бұрын
As Wood Turns open segment woodturning
@antoniovargasolmo4650
@antoniovargasolmo4650 6 жыл бұрын
Conque aspegado los cuatro trozos
@valborchardt3596
@valborchardt3596 7 жыл бұрын
Very very nice stephen, great ideas. Thanks for the tips and ideas.....really liked that. Cheers from south africa
@antonnovotny6873
@antonnovotny6873 8 жыл бұрын
Hi Stephen! It´s a great Work. Thank you!!
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Anton. Glad you enjoyed it my firend.
@billwells8054
@billwells8054 8 жыл бұрын
Nice video Stephen, thanks. Bottle stoppers make great gifts. I am using the sharpening system from an earlier video of yours; have made some additional features and found a domestic source for the diamond disks.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Bill. I hope you enjoy your new sharpener. I have gotten very good feedback so far on the design. Can you tell me where you get your disks? Thank you and Take care.
@billwells8054
@billwells8054 8 жыл бұрын
Stephen, I got my diamond disks from www.kentsupplies.com, also listed as Kent Blades. 6" OD with 1/2" hole at center. I paid $13 each. Bought a 240 grit and 320 grit. I first tried every other abrasive option: silicon carbide, aluminum oxide, cut out sanding belts, emery cloth. Diamond is the way to go.I am glad I used a separate electric cooling fan (computer fan) for the sharpener motor.
@glennicholson3028
@glennicholson3028 8 жыл бұрын
Good luck with your upcoming shows.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Glen. I really appreciate it my friend.
@KenFairhurst
@KenFairhurst 5 жыл бұрын
Beautiful,thanks for the ideas ..
@jamesjones7568
@jamesjones7568 8 жыл бұрын
great video enjoyed it i will have to try some thanks Steve
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you James. Glad you enjoyed this project. If you try any, send me a pic. Take care.
@Lee-qp6gf
@Lee-qp6gf 8 жыл бұрын
That's a great mandrel for stoppers. Leave it to you to figure out something clever. Enjoy the show, Lee
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Lee. Glad you enjoyed it my friend. I'm running out of time for the show and am really working hard out here in the shop. Take care.
@tpobrienjr
@tpobrienjr 18 сағат бұрын
Nice. I am too cheap to buy burning wires, so I get Formica samples from HD. They make a nice black charred groove.
@adamquincey4371
@adamquincey4371 8 жыл бұрын
Great job my friend... Cheers...
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Adam. I really appreciate it, and I'm glad you enjoyed this project.
@johnanderson4351
@johnanderson4351 4 ай бұрын
you did good I learned
@lonewolfcry
@lonewolfcry 7 жыл бұрын
really nice work
@pearltroup4220
@pearltroup4220 8 жыл бұрын
great job wonderful
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Pearl. So glad you enjoyed this project.
@leksey7870
@leksey7870 8 жыл бұрын
Beautiful. Like!
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Aleksey. Glad you enjoyed this project.
@damasydia
@damasydia 8 жыл бұрын
Just found your channel...really enjoying your videos
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you very much. I hope I can keep you watching. Take care.
@knottie_gurldeannamorris1136
@knottie_gurldeannamorris1136 4 жыл бұрын
I sure miss your videos. Hope you are doing well. Maybe we'll see some more of your work soon.
@randyclary8144
@randyclary8144 4 жыл бұрын
I wish you would start doing more videos on Woodturning I miss you
@StephenOgle
@StephenOgle 4 жыл бұрын
Thank you Randy. So glad you are enjoying my channel. My last three videos are all Woodturning. Hope you enjoy watching them. Take care.
@chrisdavis6705
@chrisdavis6705 8 жыл бұрын
Really like what you do. Since you work with acrylic too, how about for the color part inlaying acrylic and "chatter" the acrylic? I'm pretty fond of smokey purple. Would love to see a video of you making that.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Chris. I like the idea of chattering acrylic, however it may not work. The chatter tool could just cut a groove. I will find out though I assure you. Thank you for the idea.
@SteveTwoodturning
@SteveTwoodturning 8 жыл бұрын
Hey Stephen, how are ya buddy? Great video, love the jig !! Have you ever tried a piece of scrap laminate or formica to burn grooves instead of using a black sharpie ? it give a great sharp burn line !! Thanks for sharing, regards, Steve.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Steve. Yes, I have used formica for burning lines. Works great. That is the method I used on the cedar bowl I did a couple of months ago. I have not tried it on a very small turning such as this though. I guess I need to give it a shot. Thanks buddy. Take care.
@billwells8054
@billwells8054 8 жыл бұрын
The Formica works well, also you can use a length of thin wire to burn the grooves. Sometimes nothing works as well as the ultra-sharp Sharpie.
@billwells8054
@billwells8054 8 жыл бұрын
Oh yes, I saw Stephen used the wire method.
@michaelhenry462
@michaelhenry462 7 жыл бұрын
Steve as usual great video, I learn so much from your videos. Question, my apologies I couldn't hear what are the specs on the tap thread
@DavidWhite
@DavidWhite 6 жыл бұрын
Thanks Steve. Great video and a new supplier. On your waste acrylic stopper blank. DO you put it in a pressure pot after you dump it into the mold?
@aferetis2379
@aferetis2379 7 жыл бұрын
One like is just not enough. I wish I could raise two
@jasonlinton9950
@jasonlinton9950 2 ай бұрын
Beautiful!!! Are they stainless steel? From Amazon?
@earlrumble1692
@earlrumble1692 8 жыл бұрын
Looks really nice! A real skill builder (which I badly need!). About how much do you ask for one of your stoppers? Oh, be careful cutting limbs in a high wind...sometimes the limbs win!!!
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Earl. Everyone needs skill building practice. That is what Capt. Eddie says. "Make every cut a practice cut". I will wait until the wind dyes down a bit before going to work on them. Take care.
@StephenOgle
@StephenOgle 8 жыл бұрын
Earl, If you will send me an email at stvnogl@gmail.com I will talk to you about how much I charge. Look forward to hearing from you.
@gilgrace1915
@gilgrace1915 8 жыл бұрын
When I cut off a threaded rod for a lathe project I file the rod in the lathe ,while spinning, with a fine file. Works great for me, but watch out for your fingers. I'm going to try to make a chatter tool like yours. How long does the metal stick out of the handle? It seems like that would make a difference on the chatter marks the tool makes. Thanks for the video, it gave me several new ideas.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Gil. I never got around to putting a handle on the chatter tool. What matters is how far it hangs past the tool rest and the lathe speed. Chatter work is near impossible to reproduce because of these variables. Just play with it. Also it works really good on endgrain but not so well on say a bowl, although you can get interesting patterns on them also. Hope this helps.
@kimmetzger4652
@kimmetzger4652 8 жыл бұрын
Good demo, Stephen. It's always nice to learn how to save money on jigs. One question: how do you melt down the acrylic scraps to get a turning blank?
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Kim. Glad you enjoyed this project. I use two part acrylic for casting I don't know if you can actually remelt it for something else. Good question though. I see some experimenting in my future.
@anthonymaida5718
@anthonymaida5718 7 жыл бұрын
Great looking stopper,s Stephen Question Do you put sanding sealer first sand the put another coat? and what kind of lacquer to you use? Thanks Anthony
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you Anthony. Yes, The first coats of sanding sealer will seal the wood and raise the grain. When it hardens it can be sanded much smoother. I am simply using Minwax Spray Lacquer. I hope this helps.
@susanbostwick5537
@susanbostwick5537 8 жыл бұрын
you are an artist Stepen Barry Bostwick
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you. Your comments are a true inspiration.
@wtb927
@wtb927 7 жыл бұрын
You can buy the metal part for the stoppers from Ruth Niles. She has very nice products plus a mandrel that fits into you headstock to turn the stopper top. A lot easier and you save several steps plus the trip to Hobby Lobby.
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you sir and I agree that Ruth Niles has very nice bottle stoppers. So does other suppliers. The only step that is added to this process is making your own jig (mandrel). Once you make the jig then the rest of the process is the same as any other brand because you only have to make one.
@georgescott377
@georgescott377 8 жыл бұрын
Good video. I've noticed you have the same lathe that I do. do you have any problems with your banjo? i have to constantly adjust mine. Thanks again for your videos
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you George. I have not had problems with my banjo adjustment. What is it that you have to adjust?
@adamthomas8369
@adamthomas8369 7 жыл бұрын
So do you use a Minwax lacquer spray finish AND a lacquer based sanding sealer? Can you use the spray finish on pens? I"m never terribly satisfied with the shine of the Mylands friction polish and CA is a pain.
@adamthomas8369
@adamthomas8369 7 жыл бұрын
Scratch that....I saw how you finish a pen in your SpectraPlay review video.
@pkindall
@pkindall 5 жыл бұрын
What skew were you using in this video? I like it and would like to get one. Thanks.
@StephenOgle
@StephenOgle 5 жыл бұрын
Thank you for your question. I have never really talked about them but they are from Craftsman. They are an older set. They hold an extremely sharp edge very well. Don't know if they are still available or not. I would like to have a full set. I hope this helps.
@kandiecandelaria1423
@kandiecandelaria1423 3 жыл бұрын
What do you usually sell those for?
@kennethlegendre
@kennethlegendre 8 жыл бұрын
Did you reinforce the threads that you put on the bottle stopper too? I thought I saw some glue around it, but you didn't show that. I made one once and the threads stripped. Trying to avoid that,.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Kenneth. Yes I did use the thin CA on the threads of the stopper also. Just be careful, while the CA will strengthen the threads they are not nearly as hard the steel bolt and can still strip if it is tightened too much.
@kennethlegendre
@kennethlegendre 8 жыл бұрын
+Stephen Ogle Thanks. I didn't think I tightened it down to much, but it was the first thing I've ever threaded on to a mandrel. I'm going to try it again drilling the hole a bit smaller and I'll try the super glue to reinforce the threads some too. thanks for answering my question.
@glentilman5059
@glentilman5059 7 жыл бұрын
What kind of glue do you use to attach the threaded rods to the turned bottle stoppers.
@StephenOgle
@StephenOgle 7 жыл бұрын
+Glen Tilman I use CA (Superglue). I hope this helps.
@gsilcoful
@gsilcoful 6 жыл бұрын
Thank you.
@michaelwenmanK7USN
@michaelwenmanK7USN 8 жыл бұрын
i would recommend Ruth Niles Stainless Steel Bottle Stoppers. much better than the Chrome plated ones that the Chrome can and does chip and flake off
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Michael. I really appreciate your insight. I have not used the Ruth Niles stoppers, but will give it a try. Take care!
@michaelwenmanK7USN
@michaelwenmanK7USN 8 жыл бұрын
yw. Ruth has quite an array and also has a Morse Taper Mandrel that is held in the headstock with a drawbar, but the 3/8-16 threads on the mandrel is also a tap.
@StephenOgle
@StephenOgle 8 жыл бұрын
Excellent information! Thank you again. This can help people know about alternatives. I am anxious to check them out myself.
@GeraldJensen
@GeraldJensen 8 жыл бұрын
Hey Stephen ... just curious ... what kind of price do you get for your stoppers?
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Gerald. Glad you enjoyed this project.
@StephenOgle
@StephenOgle 8 жыл бұрын
Please send me an email and I will let you know what kind of pricing I use for my bottle stoppers. stvnogl@gmail.com
@williamwalters3252
@williamwalters3252 6 жыл бұрын
West did you use to burn in the lines on ur bottle stopper
@StephenOgle
@StephenOgle 6 жыл бұрын
Thank you sir. I use a guitar string with handles on the ends. Hope this helps.
@jmber27
@jmber27 8 жыл бұрын
👍👍
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you very much.
@buckmetta
@buckmetta 8 жыл бұрын
any chance to inform the name of music around 16:00 ? - thanks
@StephenOgle
@StephenOgle 8 жыл бұрын
The music for my videos comes from the KZbin creator music base. It can be used for videos without copyright infringement. Glad you like it.
@tylerrobertson9860
@tylerrobertson9860 8 жыл бұрын
where do you get wine stoppers with no top?
@StephenOgle
@StephenOgle 8 жыл бұрын
Good question Tyler. I got these at Hobby Lobby, however most all woodturning supply places have them. Try www.pennstateindustries.com or www.woodturnerscatalog.com for a good start. I know both of these places sell them. I hope this helps.
@lonewolfcry
@lonewolfcry 7 жыл бұрын
is there a specific wire to use when you burn the wood.
@StephenOgle
@StephenOgle 7 жыл бұрын
Thank you sir. I get my wire from music stores or guitar players. You can generally get used guitar strings for nothing. I like the guitar strings because they are different diameters. Get the whole set.
@lonewolfcry
@lonewolfcry 7 жыл бұрын
that's a great idea i never thought of that i am fairly new to turning and i am in the process of trying something different than the pens. Thank you again for the tips and ideas .
@woodwoman9130
@woodwoman9130 8 жыл бұрын
Nice project! I use Ruth Niles bottle stoppers too. She is a wood turner like us too. Her stoppers are made in the USA and she has stainless and now has a brass design. Here is her web site nilesbottlestoppers.com/
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you very much Patricia. You are the second person to mention these stoppers from Ruth Niles. You can rest assured that I will check out this site. Thank you again and Take care.
@boblauver8893
@boblauver8893 8 жыл бұрын
Instead of boogering the threads with pliers, have you ever thought of using a couple of nuts and a wrench? Easy handle and no wonky threads.
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Bob. Very good advice. I just did not have 8x1.25 nuts to use as a jam nut. That would definitely have worked better. Take care and thanks for the suggestion.
@donbeveridge997
@donbeveridge997 8 жыл бұрын
Have you tried a CA finish?
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you for your question. Yes, I have used CA to finish projects I have a couple of videos covering my methods if you would be interested.
@donbeveridge997
@donbeveridge997 8 жыл бұрын
And you like the lacquer spray better for this project? Does it hold up better to use and washing? Just asking for my own personal use in the future.
@StephenOgle
@StephenOgle 8 жыл бұрын
Not sure if it is a better finish than the CA. It is very hard and it is much easier to use. I do not know about the washing but I can say that I have not gotten complaints about the lacquer washing off. CA is very hard but it takes very patient polishing to make it look as good as the Lacquer also. I hope this helps. Take care.
@crood1954
@crood1954 8 жыл бұрын
Really like the chatter tool idea. Will check out my Hobby Lobby for the stoppers Thanks
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you sir. Glad you enjoyed this project and found it helpful.
@Lee-qp6gf
@Lee-qp6gf 8 жыл бұрын
Stephen, check your Email you are using on the tube. Lee
@johnseymour9550
@johnseymour9550 8 жыл бұрын
Stephen,How much?
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you John. I'm glad you like these stoppers. Please send me an email if you would like to know how I price them. stvnogl@gmail.com Take care!
@robertcornelius3514
@robertcornelius3514 8 жыл бұрын
Stephen, not to be rude, but you did not look well in this video. Was it a 100 degrees in the shop?
@StephenOgle
@StephenOgle 8 жыл бұрын
Thank you Robert. Thank you for the concern, but all is well. It really was around 100 degrees in the shop that day. LOL!
Bottle Stopper
28:47
RJBWoodTurner
Рет қаралды 72 М.
How to Turn A Bottle Stopper That Sells By Dean's Woodworking. #woodturning
17:12
Epic Reflex Game vs MrBeast Crew 🙈😱
00:32
Celine Dept
Рет қаралды 33 МЛН
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 6 МЛН
This mother's baby is too unreliable.
00:13
FUNNY XIAOTING 666
Рет қаралды 35 МЛН
Woodturning - Bottle Stopper Marathon
12:10
HodgePodge WoodWorks
Рет қаралды 5 М.
Natural Edge Bottle Stopper
13:38
Cip's Wood Chips
Рет қаралды 29 М.
Turn a Bottle Stopper : Not Just for Wine Bottles!
24:11
Mike Peace Woodturning
Рет қаралды 15 М.
How to Turn Bottle Stoppers - Woodworking Wisdom
28:56
Axminster Tools
Рет қаралды 11 М.
D-WayTools Beading Tools Part 1
12:49
Larry Hauch
Рет қаралды 24 М.
How To Get A Perfect Fit Between The Stopper And Your Blank
5:18
Niles Bottle Stoppers
Рет қаралды 6 М.
How to Turn Awesome Bottle Stoppers
13:38
ToolMetrix
Рет қаралды 13 М.
How to Turn a Bottle Stopper
18:01
Four Oaks Crafts
Рет қаралды 13 М.
Bottle Stoppers Easy Wood Turning Project
18:01
ThePapa1947
Рет қаралды 13 М.
Epic Reflex Game vs MrBeast Crew 🙈😱
00:32
Celine Dept
Рет қаралды 33 МЛН