1250 Watts! The Worlds Most Powerful Production Tube Amplifier - VTL Wotan

[@whiteknuckles]

Also function as space heaters in stereo.

[@JMAudioEditions]

the VTL comes with a pre filled out divorce papers

[@gabojones3087]

Touché 🤣🤣🤣

[@Kowinaida]

Lol!

[@richy2496]

That’s hilarious 😂

[@neilobrien7307]

LOL

[@hardyerhardt5929]

🤣🤣🤣🤣🤣

[@stevenlester4926]

Interesting comments from folks who have not had any real listening time on these. With a year and half a dozen speaker/cable/source and room combinations, and many hours of listening and comparing to other amps, a different perspective is gained. Very special beasts.

[@СергейСтриженов-ж4ы]

Да это понятно что не каждый может себе такое позволить у меня была система за 1.5 ляма ав процессор маранс v10 и 16 канальный усилитель мощности маранс v10 и колонки эмотива вт3+ за 300к скажу так что качало хорошо и за такого звука у меня болели уши и пришлось с этим со всем распрощаться (

[@johnhudelson2652]

Great space heaters. You could use one of these amplifiers for arc welding.

[@danwaibel4356]

I own a pair of these, and they are the best amps I've ever heard. I'm feeding the amps with a Conrad Johnson Premier ten preamp that's been hot rodded a bit. Then the amps are driving a pair of B&W 801 series 3 speakers. It's more amp than I need, but I run them 99% in the triode mode, and they sound super sweet. I've run a lot of Audio Research amps in the past, and love their products, but the Wotans just have a lot of punch to them that the Audio Research amps don't have. The only down side to the Wotans is if you have to move them, you pretty much need to find two 20yr old wrestlers to lift them. Biasing them once a year is a piece of cake. Oh, and living in Minnesota, I don't mind the extra free heat in the listening room that the Wotans provide!

[@manardh7387]

I have the Ichiban's. You have obviously needed to replace a cathode bypass capacitor on occasion after a tube failure. Not a big deal if you are familiar with the soldering iron. I run mine off 240 volt power input in triode mode since they were designed for triode only. Very enjoyable listening for many years now. That's a lot of tubes.

[@NerdyMeathead]

Hello Dan, Can I be in your will ? lol jk please make a video showing this beast off

[@danwaibel4356]

@@soulnik I'll have to do that sometime. The camera won't do the sound justice though. Just trust me that these amps have big balls!

[@dilbyjones]

So crazy. So perfect in terms of not spending $$$$. I mean for me personally

[@VoltLover00]

All tube amps are distortion generating machines. Purifi amps will crush these in terms of quality

[@monsterstereos1836]

God Damn, this thing looks as dangerous and powerful as a nuclear power plant!!!

[@AudioElectronicsChicago]

Insane, these can run any speakers

[@iampuzzleman282]

Definitely want something that I have no need for. Crazy powerful.

[@СергейСтриженов-ж4ы]

Ага и цена ещё как квартира или машина

[@rongoodman8874]

Paul Klipsch famously stated that, "Power equals distortion" and that was his base approach to making very sensitive speakers. There is another well known engineering saying, "cumulative error". I am afraid that this approach invites that phrase.

[@justinhiggins2210]

That's kind of what I was wondering, the more devices in an output path the higher chance of some of them becoming dissimilar in the arc of the soundwave. As their is no such thing as mirror image output devices? I guess that's why they have a bias adjustment for each valve, or tube as most people call them. I've been doing amateur, hobby amp repair for about 20 years but I wouldn't dare call myself an expert or someone who would give advice as if I knew more than they. But I was intrigued by your comment to the point of reply. Thanks.

[@Gez492]

Some Klipsch speakers can be fun to listen to but there are others that are pretty poor. I don't believe Klipsch would want a totally flat frequency response speaker as they tend to sound lifeless and dull. So I guess just as distortion is present in Amplifiers, colouration is present in Speakers. The difference with Tube Amp distortion is that second order harmonic and even order harmonic distortion are known to be very pleasant to the human ear where as solid state amp distortion is very much not. I would wager that a blind listening test between a solid state and Tube although unscientific would be heavily in favour of the tubes

[@f430ferrari5]

@@Gez492 but wouldn’t you agree this only pertains to the mids and highs and thus high wattage isn’t necessary in this frequency range. I mean we already have seen the popularity of separate subwoofer systems with satellite type speaker configuration. This in turn would seem to eliminate the need for a high powered tube amplifier. In addition, drawing power to the hungry subwoofers can in effect impact the sound of the mids and highs for tube amps much more so than solid state. Tube amps produce too much heat and draw too much electricity and require too much maintenance over time. It’s not with it for me. I would rather spend my money on cars. I have Class A/B amps. No maintenance at all for over 20 years. Just turn on and play. No hassles.

[@omenoflaherty1294]

Judge: It says here you were climbing up an electric pole? Audiophile: Well I had just bought these new amps...

[@edbrumbaugh9202]

Wow, awesome Monoblocks. I do have an all new appreciation for the auto biasing on my PrimaLuna Evo300 Tube Integrated amp. Thanks for the video, was very interesting.

[@warrenosborne6044]

No heat needed in winter, but a hell of an AC unit for summer. My SVT has meet her match.

[@marksauer7604]

Quite the room heaters

[@dilbyjones]

Ooh watched more than once...lol This is the bass definition I personally am looking for.

[@PrimeHiFi]

Biamping a pair of apogee grands with 4 of these... That’s quite the setup haha

[@stevemitchell9848]

That setup is complete Overkill unless you're running a rock concert

[@bakzpf]

It's incredibly ironic at how quiet the audio is for this video.

[@stevenjones5226]

Humbly low

[@joshuafloyd2769]

I’ve got Philips 2000 watt tube amplifiers! Built in the late 50,s!

[@Moparvanman]

Tubes will always be amasing

[@vladislavbarakin9599]

Are the lamps in the amplifiers matched according to the parameters? If this machine breaks down, it will be very difficult to fix it.

[@robertsupercalifragilistic7404]

They’re beautiful

[@christianbolt5761]

With the MB450 I really prefer the triode for all listening

[@user-qm7nw7vd5s]

That’s so INSANE. Where are they made? And more importantly, where are the tubes made?

[@blendtecbrah5761]

When did these beasts go out of production?

[@miroslawswigon4464]

Yeah ideal for summer hot days. :) How much 48 tubes costs replace? But for audiphiles from Alaska or Winnipeg it is a best choice - 2 in 1 amplification and heater.

[@GarrettWilliams-RoadHustler]

What is the track playing at 7:32?

[@sc0or]

5c: That was not a driver stage. It has 4 6550s (KT88) above the transformer. Three tiny 9s are in a pre-amping stage. If they need so much money, they could add one BJT per a tube to set a bias automatically once forever.

[@zvotaisvfi8678]

you don't get it a bjt is a faster failure point

[@zvotaisvfi8678]

if you pay this much for something you don't want it to sink over a 15c transistor

[@zvotaisvfi8678]

also your better off with a resistor, maybe ideally a lightbulb, but with so many tubes all the bjts would fight eachother and react to bass notes probably .. . . Don't fall for all this peavey transtube marshall valvestate stuff bro

[@zvotaisvfi8678]

bro if you don't know it already you would lvoe it , the baldwin orgasonic concept... wurlitzer made some extra high quality similar product - Ton of tubes all subdividing a frequency, one half of a 12ax7 per pitch... with 12 transformers on. the. same. lamination. And they all broke. But all the notes being interactive, each pitch, C,Bb,E,A#...etc was just randomly mixed on faceplates next to these giant transformers on thin metal... Rang like hell, all the pitches interacted with one another. Super crazy dude, when you tune them the harmonics affect all the other pitches just like a piano....

[@zvotaisvfi8678]

dude talks about the horsepower this thing makes, then rests the meter directly on the transformer.. Idk I'm superstitious about that kind of thing... even solid state components and especially capacitors in magnetic flux...

[@dimitriskaligeris5506]

Not bad for heating systems on winter. As audio amplifier I am not sure. A PPP KT 88/120 is overdriving a pair of BW 802.

[@gabeo.731]

what is the life expectations of those tubes?

[@warpspeed9877]

Around 3000 hours. Then it's credit card time!

[@Justplast]

Bloody wonderful Love it :)

[@felipez7113]

does it have bluetooth?

[@heh2k]

The screen is to reduce secondary emission of electrons back towards the cathode.

[@jasonbrindamour903]

No schematics in the manual... bummer. Hopefully it's printed inside the case.

[@mattfranklin3622]

Off topic question, have you done any videos on the Marantz 300DC power amp in the rack behind you? What do you think of it??

[@apmdavies]

27.5 mA anode current seems a little low for KT88's

[@tee-jaythestereo-bargainph2120]

Dag on ! Get ya some of that Jack ! Let it rip potato chip !!

[@robertdrinkall8947]

Totally over the top, who the hell needs that sort of power at home!🤔

[@paulstubbs7678]

The IEM fraternity?

[@analogjames3429]

I do

[@digidrum2003]

I will connect this up to my system and scream "it's alive....it's alive!!!!"

[@socksumi]

Why do the Jadis JA-800 monoblocks take up more real estate but produce less than half the power of the VTLs?

[@dougg1075]

Now that’s audio insanity. Cool though

[@philbarone4603]

What does one do with this? I’m sweating with the tube amp I have now.

[@dksculpture]

Wild!!

[@danielesbordone1871]

Holy mac , where do you guys find all these components ?

[@tommytomlinson3886]

Very very nice very very nice love it love it

[@cesarpinto8080]

BIG MONSTER!!!

[@bobvaningen578]

Please do a sound vid...

[@martinda7446]

27mA per 6550? What voltage are they running at?

[@moodyga40]

the EHT rail in this must be big

[@joeyb4ever]

A monoblock pair of Bob Carver's Silver Seven amplifiers will get you 2,000 watts RMS.

[@analogjames3429]

Lol. And sound nothing like these lol.

[@AnunakiAtlantis]

i need use this pair to play my car's subwoofer

[@Rams_hobby]

Wow nice collection Love from india 🙏 namaste

[@user-ex9zm7bg3x]

well gosh it doesn't sound like there are too dam many people that can meet your qualifications for a sale!

[@jeddak]

Let's go head-to-head with a FirstWatt

[@mr.selfdestruct2917]

Dude, the nose breathing!

[@cool69rr]

You can probably cook eggs on those! Great for warming up a cold basement.

[@justinhiggins2210]

That meter right on top of the running transformer seems kind of suspect. I allways keep my meters as far away from any kind of field as I can. Sometimes you have no choice. I'm not criticizing please dont be offended as I am not an expert. Badass amps no doubt. I just acquired a pair of Emotiva xpa1 gen2s and the xpa1 gen2, and damn do they sound good for a chinese manufactured amp. And the price they are hard to beat as a dollar for watt, sound quality amp.

[@mang1953]

HEAT!

[@ablebaker99]

Very impressive! It's neat that folks make things like this but the THD of < 3% would really bother me. I assume that it is not that much less than 3%? So, I think I will stick with my LM386 monoblocks.

[@Gez492]

Tube amplifiers have more distortion than solid-state amplifiers, but most of it is second-order, which is quite musical. That's why it's called "harmonic" distortion. Second-harmonic distortion is exactly the same note, an octave above. Ditto for higher-order even harmonics; they are also the same note more octaves above. Even-order harmonic distortion can be so pleasant that back in the 1970s the Aphex Aural Exciter was very popular in recording and broadcast specifically because it was designed to generate and add these harmonic distortions! You can still buy it today. I've gone from huge solid state pre and power to Tube pre and power and will not go back unless something ground breaking happens in solid state

[@warpspeed9877]

Human hearing cannot detect less than 5% harmonic distortion. Typical push pull amps have their maximum wattage rating at half of that.

[@stevenjones5226]

@@warpspeed9877 I beg to differ, I can tell the diff from .005% my mcintosh, vs my carver mtf-35 which is .5% but that is tube vs solid state comparison but I can tell on my esl Logans

[@martinda7446]

''Someone that should buy these''...A weight lifter. ps like the Lux pd300(?)

[@neilbacaling7248]

How much VTL amplifier sir?

[@SkyFiAudio]

Please visit our website for full details. Thanks!

[@danguzman4676]

Push Pull/ BRIDGED same thingy. You get NO true Base in Bridge mode because there is no NATURAL decay, & that's what makes the Base sound warmer & better.

[@luckydog442]

Whether the tube amp could really deliver that huge power to the speakers is not important! Simply because most good hifi speakers in the market would gives enough sound pressure level for just about 5 to30 watt input power. For hifi music reproduction at most home listening rooms, the most important thing to consider are music reproduction fidelity.

[@zeusapollo8688]

Would be sick on some magnapans

[@danlivni2097]

Ben Jacoby is great at fixing tube amps

[@dbasarich]

I would ask Santa for one of those but I don't think it can fit down the chimney.

[@SkyFiAudio]

hahaha

[@777jones]

These guys talk so many details it sounds like it has to BS. Amazingly it seems legit

[@SkyFiAudio]

These VTL's are... in a word. Nuts.

[@timschutte6924]

Turn on amps, then the entire northeastern USA goes dark. Lol Crazy, I've never seen anything like this. I thought McIntosh had it good.

[@mig123ification]

it is a shame they didn't cut the slots in the front panel indicating left and right...... just had to cut it on the opposite way......the way it is, both indicate left.......only saying!!!!

[@duroxkilo]

...when you want half a kilowatt of even order harmonics :} those look impressive.

[@SkyFiAudio]

Like the way you phrased that!

[@ivaa7777JAWA]

Super

[@davidseal8375]

I thought the Carver silver seven was the biggest....

[@rogerchurch3804]

more than stuido power stadium power yea monsters !!!

[@gregorymcgee100]

Dang, I bet that thing weighs as much as a car.

[@glenlapwing8468]

For those who thrive on over-kill

[@scottbernard8824]

"I'll take 'Compensating for my shortcomings' for 600, Alex."

[@davenolan16]

I would love to give you a thumbs up for that funny comment, but because consumers that purchase these type of outrageous items it keeps engineers Pushing the Envelope to see how further mankind can go.

[@steveschu]

Can I be buried in that room?

[@SkyFiAudio]

Wow now this is a comment. Haha.

[@datka3]

Welding station, wow ,

[@daveduffy2823]

Turn on the amp, off go the lights. I hit a chord and fly across the street.

[@analogjames3429]

"24 output tubes each"...funny mine has 30, and so does yours

[@KB-os6lh]

Oh mama!

[@platinumpengwinmusic5564]

I thought my JP-2C 1/2 stack was overkill, Lol.

[@alaingingras7224]

All that dust! It's a crime .Man get a BIG powerfull air filtration system.Seems the wise thing to do when you have Zillion dollar equipment!

[@jctai100]

Wouldn't want to tube roll that haha

[@rompstar]

for the average person this is such overkill / who would use this, not sure :) / still pretty cool

[@roverjohn]

They make bigger tubes for this exact reason. A push pull amp with more than 2 tubes/channel is just showing off but has no purpose.

[@roverjohn]

And now that I see the bias adjustment it makes this amp look even more absurd. If that's possible.

[@vitalieBu]

Those who have a pair of these....I don't think they watch KZbin videos

[@tehscope9422]

Cool looking , but I have NO idea what your talking about . For me the most important thing is having a very low THD oh , and how many neighbor's I can piss off , just kidding . I was given a old Heathkit amp and tuner . I gave it away when I was told that it stores enough electricity to kill is that true then and now ? My choice is solid state from the 70s .

[@stofopdenaald132]

Wotan is Germanic. Odin would be the scandinavian version.

[@davidbartley989]

I mean really - what is the point?

[@franklindrebin00]

Darth Vader filmed this Video.

[@Bass-n-Boom]

Wtf are these Used For?? Can I run my bass through it? How many Ampeg "fridges" will it push!?? Aaaand...Will it be heard in the next states over???

[@huseman21]

Looks like a 600W amp. Not recommended for gigging.

[@craigenputtock]

1250 sounds like a lot. It's not. A truly good amp must be at least 5k watts for good (large) world class speakers

[@ezza88ster]

Impressive. Can't believe you didn't play the amp though! Dissappointing.

[@keeferdog5617]

MADE IN CHINO NOT CHINA! Yup- stole that one from EveAnna...

[@EnpuerKT]

Hi Fi heaters

[@mattl7886]

15 amps! fuck. I guess if you have the money for these, the electric bill isn't a concern. lol.

[@matthewszalkowski4719]

If you could afford 50000 dollars a pair . True new Price

[@amb3cog]

Average person wins the lottery: Honey I'm heading to the Lambo dealer in NY. See you in a couple of days. Me: I'm going to SkyFi Audio Honey. Be back in a couple of days. Can you do me a favor while I'm gone, and find us a nice huge house with a gigantic living room, and make sure it has enormous double doors that I could fit a car through too. I've got some serious shopping to do. Luv ya. ✌️

[@MaciekP2]

This is so stupid. So much energy wasted, so expensive to replace tubes. You may have one tube per channel and sensitive speakers and have great sound. Tubes were in era of 100dB/1m/1W speakers and are great for that. Even with two tubes you may go woth 20W or more in PP or PSE and with 90dB plus speakers will be just enough.

[@jamesplotkin4674]

For some folks, just enough isn't even a beginning ;-)

[@riccardotenconi3403]

Why

[@paulstubbs7678]

Because they can (same reason for climbing Mt Everest)