12V power outlet install for the new HONDA XL750 TRANSALP

🔴 JOIN IN OUR MEMBERSHIP COMMUNITY FOR EXTRA BENEFITS:
/ @idealbike
🔴 JOIN US ON:
👥 FACEBOOK / idealbikemoto
📸 INSTAGRAM / ideal.bike
🔔 Subscribe for more videos: kzbin.info?s...
👥 OUR FACEBOOK COMMUNITY GROUPS:
/ idealbikemoto
/ 1339974263528992
#xl750transalp, #hondatransalp, #transalp2023
We've installed the 12V power outlet for the new 2023 Honda Transalp XL750, in this video tutorial you will see all the required installation procedures.
🔴 To prevent burns, allow the engine, exhaust system, radiator, etc., to cool before installing the accessory. Because it requires specialized knowledge and special tools and equipment, it is recommended to install it at a dealer with qualified
automobile maintenance.
🔴 Honda Motorcycle Service by ASKO GROUP
honda.asko.ro/motociclete/
🔔 ALAMI BAHA (Director Service Moto)
0752.762.662
[e-mail]
Șos. de Centură 57, Chiajna
🔔 Schedule
Mo-Fr: 08:00-17:00
Sa: Closed
Su: Closed

[@roadwarrior8560]

Ridiculous that this installed not on the bike at the factory, it would cost next to nothing for Honda, instead of us having to tear the bike apart to fit it later. Thanks for the video.

[@IdealBike]

Agreed

[@Senna-xi1gr]

Yes agree, multi billion dollar company won’t fit a 5 dollar connector 😡 come on honda even my KTM has a usb socket from factory

[@JP1970]

Thank you for the video--I looked all over and then this popped up in my feed. Thanks! Liked and subbed!

[@IdealBike]

Thank you appreciate it 👍

[@FredSoulier]

Thanks a lot.

[@nevangelos9277]

First video on that once again👍 Your Honda service there is super.

[@danielalcalde316]

Thanks for all your videos, very professional Job!

[@IdealBike]

Thanks for the comment appreciate it

[@eddale5557]

I have no idea why this is not on the bike from the factory a thing that cost 10 dollar! It is the same on the NX 500 i had to install one 12 V outlet!

[@joaquinschwartz1591]

Hello @IdealBike great video! I have already the 12v socket. Do you know where I can connect an integrated charger for a GPS? I suppose the connector has been already used for the socket... thank you!

[@IdealBike]

Hello, you have a USB-C connector under the seat in the back, you can see it on my Walkaround video with Transalp

[@muimuhadresh3986]

Thank you for the infomative Video. Which usb adapter are you recommending? Do I have to pay attention to a certain diameter, when buying?

[@IdealBike]

Anything works, I would not use fast charging due to the amperes provided 1.5A

[@karlyallen3607]

Thanks for the video. Is the 12v socket a switched live do you know? I'm looking for somewhere to power my Sat Nav so I was thinking to hard wire it into the leads from the socket if it is switched live and not live all the time. Thanks.

[@IdealBike]

I don't know to be honest. It works only when the bike it's on.

[@Eris-sp6yt]

Nice thanks! BTW what will you use it for? Why didn't you install the double USB socket?

[@IdealBike]

Hello, I don't need more that this one, also there's a usb-c charging socket under the seat. Greetings and thanks for the comment 👍

[@marcofrancardi105]

One question: do you know the EXACT model of the Sumitomo connector? there are millions. thank you

[@krisos8642]

Привет. Подскажите, пожалуйста, какая приводная цепь стоит на мотоцикле? Ищу DID , не могу найти в каталоге.

[@godowskie]

Does it require additional settings on the dashboard - like initialization or plug and play?

[@IdealBike]

No, just plug and use

[@NoTengoIlusiones]

Can we charge battery trough this socket ? Typically on cars we can.

[@IdealBike]

You can charge it but it will charge slow. For battery charging you can use the USB-C socket under the seat (rear)

[@adventureundone]

On the US version you have to install the “accessory harness” as well. This is located under the seat (rear) If you don’t install that it won’t work. 👍

[@richiestang78]

You actually don't. Just checked with a multimeter the fuse marked OP in the main fuse box kills the power to both the front and rear connector. All you have to do for the rear is jump the connector. The Harness is a rip off, you can find the front 12 volt socket which is identical tot eh AfricanTwin for under 20 bucks, but the "harness" us over 40 bucks. Easy enough to wire up a cheap inline fuse if you really are concerned with relying on the main OP marked fuse. Maybe an earlier revision of the bike didn't have the main fuse idk but having a second fuse is pointless.

[@TonMachielsen]

@@richiestang78 Can you show how you jumped the harness connector? I want to connect a different 12V accesory to the dash and i don't want to buy the harness and the socket just for the jump connector.

[@richiestang78]

@@TonMachielsen quick and dirty I just jammed a wire with stripped ends into the female . Ultimately I ended up buying some of the correct metal crimp on prongs and wired a cheap inline fuse up. Cost about 8 bucks to do this. I believe the correct connector type is the Sumitomo XH-060 2 pin plug.

[@human1513]

@@richiestang78 Exactly where under the seat does the sub assembly with its fuse connect to? Was wonder what was up as I just installed the Honda accessory socket and it did not work.Then I discovered there was no voltage at the bike's harness connector. I had no idea where the accessory socket sub harness was to be used and thought Honda made a mistake saying it had to be used. I was cursing Honda as they do not show in the accessory install instructions where to use the accessory sub harness which is just a plug with 2 wires and a 3 amp fuse (with a spare fuse). I tried the USB-C socket under the rear of the seat and it has power.

[@human1513]

Where exactly as I cannot find a connector to connect the "Accessory Socket Sub-harness" to.

[@Sender76]

Hi, how do you remove the "clip", with a flat screwdriver? thanks!

[@IdealBike]

From the side they have a plastic tool you can see it orange colour

[@human1513]

You push in the pin that is in the centre of the clip then you can pull the clip out. Then once the clip is removed you can with your hand push the pin back part way out the top. Then re-install the clip. Then push the pin in the centre in until it clicks and is flush against the clip's top area. These are extemely common clips used on many things includign automobiles.

[@irarabesc]

Does the internal socket have a specific name? I would like to find a splitter for it.

[@irarabesc]

It seems to be a Sumitomo HX 040 Series connector.

[@IdealBike]

I don't know unfortunately

[@lali341]

Hello, nice video. I have new Transalp. I need to connect a gps navigation Garmin zumo XT2. Where is the free connector to connect? I don't want to connect the navigation directly to the battery. Thank you for any answer. 😊

[@IdealBike]

It's under the seat, to the rear you have a rubber cover

[@lali341]

There is usb-c. It's next to usb-c?

[@IdealBike]

@lali341 there is only one usb-c

[@lali341]

Thanks@@IdealBike . But usb-c is 5v and i need 12v for XT2. 5V power supply is not recommended for Garmin Zumo XT2.

[@human1513]

@@lali341 You will have to run 2 wires from the battery and also install an in-line fuse.

[@titussoft]

It is USB, or classic 12V socket? You didn't show to us. Thank You!

[@IdealBike]

It's classic 12V socket like in the car, you need a USB charger. Under the seat, in the rear back you have the USB-C charger

[@titussoft]

Thanks!@@IdealBike

[@the_snakebiker]

Hello Ideal Bike I have the new Transalp and thank you for this video. My problem is i don’t have the connectic from my chargeur 12 V for Connect to the Transalp. It’s just simple fils… Can you help me please ? The SnakeBiker

[@IdealBike]

The 12V socket it's bought separately and costs about 20 EUR. It's not provided by default for the bike

[@the_snakebiker]

Thank you for your return. Do you know where is better to buy this 12 socket please ?

[@IdealBike]

@peterpalmer-ie3jw From any Honda Dealer

[@the_snakebiker]

Ok, i go back to my Honda shop for ask again this connetic because they told me « we don’t know the connectic of the New Transalp.. » we have to see… !

[@gabrielkopp2036]

Why did honda not put one on at the factory??? All the other adventure bike come with them

[@IdealBike]

The answer is simple, to take more money from us after

[@human1513]

They do in 2014 I know in Canada.

[@human1513]

I was wrong. In Canada there is the rubber plug but not the 12vdc socket. I just bought a 2024 Transalp and discovered this. I was going off all the KZbin reviews I have watched. I bought the socket and installed it but cannot understand where the "Accessory Socket Sub-harness" plugs into. I read it is under the rear of the seat but I cannot see a not used plug? I see the USB-C but nothng else. Am I blind?

[@projectknifehand]

This is not correct. That is, you will not have power. Still another part needing to be installed under the seat.

[@IdealBike]

It works perfectly

[@projectknifehand]

@@IdealBike Did you have to install the additional component under the sea?T or did it come with it

[@projectknifehand]

@IdealBike There is an additional dummy plug under the seat with a relay. Had to be purchased separately and installed as well. Perhaps it's because I have A US model.I don't know

[@IdealBike]

@projectknifehand The dealer has it and used it

[@IdealBike]

@projectknifehand Nothing else than it's presented in the video

[@NoTengoIlusiones]

Can we charge battery trough this socket ? Typically on cars we can.

[@IdealBike]

For the battery it's recommended to charge it by the USB-C socket under the seat (rear side)

[@NoTengoIlusiones]

@IdealBike mmm.. but that as sufficient voltage ⚡️ input to charge the bike battery 🔋? It's the bike battery , not an external one.

[@IdealBike]

@NoTengoIlusiones With only 2A I don't think so. I have portable Huawei pump that I charge it on external battery