14" Ape Hangers Installed! First ride with Fat Bagger Inc handlebars on my Harley Road King Special

[@TheTim380ibew]

Words can't express how badass that bike looks. Well done.

[@ennphotos]

Thank you!

[@bigfootninjajr1481]

Sick bike

[@a.crocker379]

Hi Nader, Great video and love the bars!! Where did you get the turn signals from? They are beautiful! Andrew

[@ennphotos]

Thanks! They're holding up great too! Link is in the description for these exact ones

[@simplemanmtb143]

Did the installer perhaps put the wrong blinkers on? Like right on on the left amd left one on the right? The "wave" goes in the opposite direction. Just curious. Nice bike!

[@ennphotos]

Yeah we agreed to invert it for aesthetic purposes.. It sits flush and is pretty much hidden now when lights are off, but the proper way kind out stuck out and sat under the levers which we thought was a minor eye sore. They're basic & cheap so it works for me 🤷🏽‍♂️

[@FLHCSfan68]

I have KST Kustoms 16" Straight Jacket Apehangers on my Road King Special.

[@UncleBogator]

Looks good man

[@Zoe0115___YuPin]

I have a question my height is 5'10 and is 14" ape hangers are fit to me ? cuz I don't have any experience for ape hangers tho BTW my bike was 103 breakout 2016

[@ennphotos]

Did you end up getting bars? 14" is such a great base honestly, and if they are too tall you can always pull them back slightly for perfect riding stance

[@2021FLHRXS]

Sweet RKS. Looks real good. I have the 16” Fat Baggers Inc bars on my 2021 RKS. Really like them.

[@ennphotos]

Glad I went with these! Really enhances your rider view with a new set of bars

[@2021FLHRXS]

They look much much better and feel way better riding with them than the stock bars

[@gonzalezt7081]

went to check out your 16in bars.. 14s look so much better! to my personal opinion

[@2021FLHRXS]

@@gonzalezt7081 thanks for checking it out

[@gonzalezt7081]

@@2021FLHRXS no problem your bike looks awesome! 16 are just to big for my height so its all me ! Man! 👍🏽👍🏽

[@rosscoutts4304]

Hey nice ride, coming along, get er done and post man. Hey you wanted the Factory 47, how do these feel compared to them? You know wrist angle, as I have laid my hands on the 47 before but no where to see FBI Thanks man.

[@ennphotos]

Truly appreciate it mate! I'm quite happy with these and feel my rider stance is very comfortable and just the right narrowness. I only had the Carlini's on before which were quite wide and haven't been able to test out a set of 47's

[@markd3641]

Can you get more specific about the the turn goals from Amazon. I have a 2022 RoadKing Special and all the lighting says it doesn't fit my bike model !?

[@ennphotos]

I included a link to the turn signals in the description, exact ones I bought. Hope that helps!

[@Centralthabiker]

great looking bike have to love the road king

[@ennphotos]

You got that right!

[@mikeanderson2152]

Enjoyed the video. Considering getting this bike as my first bike when i take and pass the MSF course

[@ennphotos]

It’s a heavy bike! I bought a sportster immediately after passing the course with the intention of upgrading once I was fully confident on the road

[@mikeanderson2152]

@@ennphotos i also look at the iron 883 ill probably will be getting that bike some time this year so i can get comfortable riding.

[@mikehalladay1334]

Was going to have someone put bars on mine until I seen what they wanted $$ 1700 bucks.. I’ll watch video and do it myself

[@richpuller1348]

Im currently torn between the Factory 47 14" signature series & the 14" Fat Baggers 1½" Pointed Top Handlebar Kit- 14" Chrome at $750. Im just not sure witch way to go. My local HD shop also told me it would take a couple hours longer to install non Fat Bagger bars. I find this a little odd. They are fishing wire through roughly 19 inches of pipe on 14 inch bars and the pipe has an OD of 1.5 inches. Novice KZbinrs dont seem to have a problem with it.

[@ennphotos]

Yeah so I went with the Fat Baggers bars because the inner tubing is designed to easily run the wiring through. Fat baggers was actually started by a couple guys that worked at Factory47. They saw the flaw in the kink and how difficult it would be to run wires so they made their own product. Also the FB is a two piece system that connects at the risers

[@gonzalezt7081]

how are those signal lights holding up as I look them up on amazon looks like a really cheap brand.. but they look awesome

[@ennphotos]

I’ve had no issues with them so far, I really enjoy the sequential signals for a more modern look

[@BobBob-fp5fn]

Nice bars but you can use the stock clutch and brake cable with 14s... plenty of videos showing how to do it on youtube.

[@bsharp7665]

What brand are the turning signals on the bars?

[@ennphotos]

Just an amazon find, looked up sequential turn signals

[@ElVeteran44]

What phone mount you have?

[@ennphotos]

I'm using the Rokform Perch mount and their phone case. Holds up really well, super easy to reach while riding, and I like that it's connected to the controls so you don't really notice it when a phone is not on there.

[@ennphotos]

Biggest question on this video is what the the turn signals are! Here's the link and I also provided it in the description. They are only $20 TURN SIGNALS: amzn.to/3zEqVZk

[@rtbt8185]

Look for bars for my RKS. How tall are you bro

[@ennphotos]

I’m 6’2” bro, really like how arms n shoulders sit the bars

[@atlasDad]

@@ennphotos Also looking for an ape hanger. I'm 6" tall. do you think 14" apes will be too high for me, I don't wanna have tingeling in my hands.

[@kevingraham8382]

Do you have a link for that sissy bar?

[@ennphotos]

Yup! I've got a 26" Sissy bar here: amzn.to/3MnXoed

[@montrez1988]

how's the wind without the windshield

[@ennphotos]

Only really ever an issue when going 80mph+ I definitely intent on getting the curved windshield to help on longer rides

[@ratchapholrojrattana2729]

Can I have a link that you bought this bar? Tank you

[@ennphotos]

Yeah sure! Just narrow it down to your bike model fatbaggers.com/motorcycle-parts/handlebars-accessories

[@khalilismyname]

I have tried the following brands: Factory47s Fat Baggers Inc KST Carlini Paul Yafees HD This time round for my Roadking Special build I have gone back to Carlinis flying apes. Picked a Memphis Shades road warrior fairing which helps me on the long rides, especially with the wind buffeting.

[@ennphotos]

I was originally set on getting the memphis shades one also but I think I love the look of the headlight extension too much. Decided to go with the HD curved windshield once I can save up enough

[@khalilismyname]

@@ennphotos I have the headlight extension and put that on when I'm not on long rides.

[@maurocazzola9750]

Top

[@jamiej1956]

What mirrors are those

[@ennphotos]

Jamie these are the HD "Profile Custom" mirrors

[@gonzalezt7081]

@@ennphotos are those handle bars 1 1/4 thick ???

[@ennphotos]

@@gonzalezt7081 The bars come in two pieces and connect at the base under the risers. The bottom clamps are 1.25inch at the base and the bars are 1.5inch from the risers up

[@FreedomRider1982]

💯👍👍