Leica Captivate DWG and DXF import

[@shaunhighway3090]

What an understanding video, thankyou so much.

[@bobsurvey4335]

Very good video. I appreciate the way you explain things as opposed to simply showing the app and/or commands. I would love to see one about bringing in an alignment & profile from C3D. Thank you.

[@14rhatch]

kzbin.info/www/bejne/gqqomnaerN6nqtksi=kV5vo9-llUm05z5H

[@14rhatch]

This video doesn't show an alignment, but it's the exact same procedure as the surface. Use an XML for surface and alignments.

[@rebazahmad4240]

Thank you so much excellent video. I appreciate your work on the video. Could you make another video showing same way or easier way to do surveys and as built as well?

[@mike77711]

Thanks for the Video! I'm just trying to figure out how to get my files into the "Leica" Format. I got everything else working great, but was curious if it needed to be exported a certain way in order to get the file into the "Leica" format in the Reference Files tab?

[@14rhatch]

There is no "Leica" format for reference files. Simply do a DXF, DWG, or IFC directly out of CAD.

[@mike77711]

@@14rhatch In your video at 2:17 to 2:30 you can see the “Verification Sample 2015_dxf” shows the Format as Leica and there is a filter for Leica. I understand that these are still technically a DXF file, but just curious why it shows as “Leica” format rather than a DXF?

[@yomeki]

wow excelent thanks for this video well explained and detailed, just a question when you say you hold the stylish button what button is that one?

[@14rhatch]

Sorry, I mean just hold the stylus down on the map screen. That initiates the menus

[@oOTBONE77Oo]

This is amazing thank you.. I’m definitely trying this tomorrow when I get to work… How do I get a simulator?

[@14rhatch]

You will need to contact your local Leica rep. If in TX or OK I can get it for you.

[@masoudmott1]

How do we attache a DWG drawing if it’s been produced as a block.

[@14rhatch]

You will need to explode it first

I explode all the blocks, I think Captivate can´t read blocks

[@shreyapatel323]

Hi my drawing zooms out when i upload i dont no why maybe because i purge it and make it a block please helpppp. I have cs20 and ts16

[@14rhatch]

Most likely. You cannot use blocks. Also check your job for points that shouldn't be there. Go to "view and edit data"

[@shreyapatel323]

@@14rhatch thanks Peyton really appreciate your help. So i cant use WBlock before uploading it onto ts16?

[@ionantohi3244]

how to create a SD card simulator?

[@ColexPreston]

I didn't know leica took dwgs I thought it was just dxfs

[@ColexPreston]

So did I, When you go to import it doesn't give you the dwg option