15-21 F150 LED TAIL LIGHT CONVERSION (INSTALL)

[@Foxbody302]

I bought some oem style aftermarket raptor taillights for my 2017 STX. I love the look of them, and the best part is that you don’t need a buy a wiring harness, it works directly with the green and brown plugs!

[@JoshVanderWal]

how did you fix the hyperflash in the truck? i dont see a link to any video?

[@mattewalker_]

I’m still working on getting forscan to fix it. The problem is that Forscan works with PC’s and I have a MacBook so it’s been a bit tricky

[@sourcey6620]

Egoboost73 boot camp ?

[@dondon4841]

Thanks. Now there’s something else I need to buy.

[@Imwityohoe]

What if I have 4 sensors?

[@markallen9389]

Great video! Thank you! Today I purchased the same taillights from someone on FB Marketplace. The taillights didn’t include the BLIS sensors. Will these taillights work without the sensors? My truck isn’t equipped with sensors.

[@mattewalker_]

Yup! My truck did not have the sensors either and there were no warning lights or anything

[@rasheedmack]

250 for the whole set!! Great deal!

[@danielamankona8702]

Hi Matt, I'm in the same situation. I installed a Lariat LED taillight on F150 XL, but unfortunately for me, my brake and signal lights don't work. Everything else works, any advice?

[@mateomexicano81]

Where is the video to fix the hyperflash ?

[@raultrevino3449]

Question, Does the BLIS works? Also if i decide to install the backup sensors would they wotk? Or they would need something else? Nice video by the way!

[@mattewalker_]

Yes, the back up sensors should work! Also, the BLIS function should work if you have other BLIS ready equipment. Like mirrors (with the indicator lights and more).

[@davidpiampiano9228]

I know you have said you got those tail lights from Ebay but you dont happen to know the part number for those do you? They look like the raptor tail lights from 2015 to 2017 and im looking for a set but just want to make sure they will fit in my 2020 f150 xlt.

[@mattewalker_]

David piampiano I got the tail lights from a guy on Facebook actually. The 2015-2017 lights should match up as well. Just as long as you buy the wire harness that goes along with it.

[@davidpiampiano9228]

@@mattewalker_ ok thanks for the fast reply!!

[@nickhawes2523]

I’ve done the same thing with my XLT. I rigged up a plate on the blis module to block water but I’m having still having a problem with leakage. Do you know of a solution? I guess new blis modules are around $500 from ford but I need a way to seal them up better

[@logantownsend8157]

You can probably just get the brackets. FL3Z-14D189A and FL3Z-14D189-B. They look to have a gasket on them that will seal it up. I'm thinking the screws are W71533-S900 if you need those too. The brackets are 70 bucks a peice on Tasca currently the sensor is 730 so as long as you're not trying to add blis the bracket itself should probably work.

[@desperadopharaoh2361]

I have blis fault code eveytime I start my car but my taillights don't have sensors or a spot for them ....I want new taillights can I override having the blis sensors and go led without it and have no code

[@sampuhala3855]

Any updates on how to fix the dash hyper flash issue?

[@garytgibson1666]

You can add a resistor into the wiring or go into computer with FORScan and turn off the hyper flash.

[@juanortega2486]

What is the reference to buy the same tail lights?

[@mattewalker_]

I bought the lights off of a guy on Facebook marketplace so I do not have a link or reference

[@kevinberry5994]

Great video: my truck has the BLIS halogen lights. Do I need to update my harness?

[@mattewalker_]

Kevin Berry you will yes. The led’s are built into the tail lights so the plugs are different than the ones that hook into the halogen lights

[@Jordanjr1588]

Thanks for the video. Question. I purchased same harness and I think the same lights I picked up on market place. Everything went well except when installing lights. I aligned all pins but bottom screw hole doesn’t align completely. You have to push and hold bottom of tail light in order for it to line up. I can get both top and bottom screws in but I feel like there’s a lot of tension. Did you run into any issues. Any advice would be great. Thanks

[@rcer462]

Thx for the video. Where’s the link to fix the hyperblink inside the truck? Cheers

[@mattewalker_]

It is coming very soon! Make sure you're subscribed and I'll release it as soon as possible

[@Backyard.bandits]

Did you release the video ?

[@Churchill-nl3qr]

Hi,I’m a little confused.Do you have a hyper flash (in the dash or in the lights)?These lights come from factory with led and without blind spot?

[@mattewalker_]

Churchill 1945 SOME XLT trim and higher trucks have oem led’s w/ blind spot. And the hyperflash is ONLY visible on the dash.

[@Churchill-nl3qr]

Thanks, just asking because I don’t see the blind spot mark outside of your led lights.Thank you too for the update on the hyper flash.

[@mattewalker_]

Churchill 1945 the blind spot Mark is just a sticker indicating that these tails are capable for BLIS. The sticker has been removed from mine.

[@achambers3093]

Will this connector allow me to plug the RECON LED TAILS meant for LED f150s?

[@2fast4u8]

I was wanting to know what part number for the taillights. Can you do the same with the headlamps?

[@nathankopfer2502]

Will this harness work with the 17 to 18 blis tail lights going on a 2016 halogen truck

[@ekgram5109]

For this conversion all you need are the LED Tail Lights and two of those wiring harnesses from Tasca that you linked right? Nothing else?

[@mattewalker_]

Ekgram just the one wiring harness from tasca and tail lights! I have the part number and link to the harness in the description. That is all you need!

[@ekgram5109]

@@mattewalker_ Awesome, thanks for the quick reply. Can you link me the tail lights that will work for a 2016 F150?

[@mattewalker_]

Ekgram So in the video, I mention that I bought the tell lights on Facebook marketplace. If I were you I would check there or eBay or taillights that will work for your truck. DM me on Facebook or Instagram if you have any more questions!

[@markgennaro153]

I installed some Morimoto 3D LED taillights on my 2017 F-150 STX, and they are plug and play. No wiring harness to fool with. Took about 15 to install. And they work great and look awesome! I paid $425 out the door. I'm not hating on you bro, but the morimoto's are the way to go. Everybody likes them. But to each his own - beauty is in the eye of the beholder!

[@mattewalker_]

Fair enough! I loveeee the look of OEM tails with the outline and I just so happened to find my tails for $300 too and the harness was super easy to install too

[@AxelsPokedex]

The Morimotos are god awful tail lights. Super ugly.

[@g1burrito]

@@mattewalker_ I'm with you! Iike the look of the oem led tail lights more.

[@RoRo-hw3um]

Is there any way to install these and get blis to work? I don't have the bljs side view mirrors but if I were to buy those with these lights can I set it up to work ? Or is there some other major hardware in the truck I'm missing ?

[@iMakeDatBedRock]

Is it possible to change the LED bulbs in the tail lights? Or you gotta use the ones they got.

[@junjng153]

@Egoboost73 So do you just have to change harness (JL3Z-13A409-G), canbus wire? and BLIS system works?

[@mattewalker_]

jun jung so my taillights came with the blis module but I don’t have Blis. The one in the description is the only one you need!

[@junjng153]

@@mattewalker_ oh okay but still looking good truck. i'm actually going to install BLIS next week or so. it will be interesting

[@junjng153]

@@mattewalker_ Finally got to work my blis on my 2016 f150 xlt. I used 2018 Modules, tail light. So you should do it since your tailights came with the blis module and it should be easier to do for forscan.

[@raultrevino3449]

jun jung so in order to install blis, you need the tail lights, mirrors, module and the harness that is in the video right? Only that?? Also, by any chance do you have the part number for the module?

[@junjng153]

@@raultrevino3449 DRIVER SIDE HARNESS: FL3Z-14631-A PASS. SIDE HARDNESS: JL3Z-14630-G DRIVER SIDE MIRROR: FL3Z-17683-PC PASS. SIDE MIRROR: FL3Z-17682-PB DRIVER SIDE MODULE: DG9Z-14B291-WP PASS SIDE MODULE: DG9Z-14B291-WR MIRROR FOLD CONTROL: FL3Z-14529-BA SPOT LIGHT BRACKET: FL3Z-1504339-DB SPOT LIGHT BUTTON: FL3Z-13D730-EA SPOT LIGHT MODULE: FU5Z-13C788-A Also you need JL3Z-13A409-G harness Canbus wires Blis taillights with modules.

[@danielwest6614]

Do you know buy chance if the tasca harness will allow my f250 xlt taillights to swap with Platinium taillights ? Thanks

[@Barttio292]

Awesome! Did your turn signal and brake light worked also? Definitely doing this, just ordered the harness but going to try to see if I can make it work with the non bliss led lights or king ranch tail lights as some people calls it

[@mateomexicano81]

Did it work with those non bliss lights? Im thinking of doing the same thing

[@garytgibson1666]

The non blis has a different connector

[@benflanagan-rx2cl]

Can you send me a link to the harness and picking up a side of these tail lights down the road for 100 bucks?

[@mattewalker_]

I can’t send a link, but they’re available on tasca’s website! Call your local ford dealer and ask for the part number or it’ll be available on a forum I’d imagine

[@fjpcisco]

Any updates on the hyper flash for that harness ? I bought a made up harness at eBay with small ballast included for the hyperflash but it will nice to find the way on that one it may last longer not sure,so far mine is working good I got warranty for one year.

[@antonioherrera9687]

do you have the link for those? I planned on taking the same route you did with the ballast for no hyper flash. What year is your truck and do they still work great?

[@Ryanbirkholtz]

You can just use forscan to get rid of it

[@garytgibson1666]

Can you tell me what your bcm codes are in forscan for the following modules? I’m not getting perimeter lights only as my drl. I’m trying to set lights back to factory settings. Modules are 726-26-04 726-45-01 726-50-01 Thanks

[@ThePawsome7]

Awesome work done to the truck. What bed liner do you have?

[@mattewalker_]

Thanks man! And I just got my bed liner done at a local shop. Nothing big name

[@keti3056]

Did you cover up the hole where blis goes or did you leave it open?

[@mattewalker_]

The opening was not exposed on mine

[@Rolvin16]

This is awesome and thx for sharing! Any tips on where to pick these up at a sane price? $250 is a steal for sure! Was that new or used?

[@mattewalker_]

I found them on Facebook marketplace! So just keep your eyes peeled! And that was used

[@Rolvin16]

@@mattewalker_ Thx! I grew impatient and just got the Morimoto smoked leds instead. On sale for 4th of July for $442! Can’t beat that for those lights!

[@michealjordan23bulls]

Hey did you have any problem when mounting the led taillights? I can't get the holes aligned in order to secure them.

[@Jordanjr1588]

Did you ever figure out why they weren’t aligning? I’m having the same issue. Thanks

[@ulisessaenz7392]

What’s the harness name?

[@peterambelang4888]

What headlights are those I need them for mine!

[@Rev.DavidJTowns]

is there any difference in the taillights between 2017 and 2018 f150 xlt?

[@mattewalker_]

Yup! They’re the same housing so they fit but they’re different leds

[@Rgmz225]

Does this harness work with the LED with BLIS.? Or does they have to be NON BLIS.?

[@Ryanbirkholtz]

They have to be blis with that harness

[@relsoc]

So I’m gonna do this mod but now I’m concerned on the hyper flash. How is that corrected? Thanks!

[@mattewalker_]

Mike Eason I’ll have an update soon! Thanks for checking it out!

[@relsoc]

@@mattewalker_ sounds good. so just so I understand is that the tail lights function normal but the dash does the hyper flash? Maybe just an update with forscan?

[@mattewalker_]

Mike Eason yes, so just the dash shows the hyper flash. The exterior turn signals do not show the hyper flash whatsoever

[@sKoutzyy]

@@relsoc the computer doesnt recognize LED voltage coming through to originally halogen trucks, so it hyperflashes because it thinks its a blown bulb, so either resistors or forscan could fix it i think

[@andrewward4246]

do you have bumper sensors? do the bumper sensors still work? a bit confused. I have the sensors and would want to retain them. Nice job on the install. Looks great.

[@mattewalker_]

They will work! You'll just have to make sure they get plugged into the extra plugs that I showed in the video!

[@ozzie1684]

@@mattewalker_ are you sure it's for the bumper sensors? I figured it was for the bliss system

[@mattewalker_]

Auston Dowling yessir. Positive they’re for the bumper sensors

[@illduitmyself]

straight vanity. some day we grow up and dont care about such things...

[@mattewalker_]

It’s all personal preference. I like the aesthetic of the LED taillights for the time being, and I’m assuming you do a bit as well since you viewed the video! Haha

[@kasb58]

FYI, the camera lens is two to three inches to your left. Don't know why so many youtubers look at the camera display instead of looking directly at the lens.

[@mattewalker_]

Because I’m recording on my phone my guy. I’ll be more mindful next time

[@rseal1396]

can you remember what the brand of light is

[@mattewalker_]

It’s a Ford OEM tail light

[@UtubeUser009]

These are OEM tail lamps, correct?

[@mattewalker_]

Yup!

[@miami1377]

The blind spot assist work?

[@mattewalker_]

If you have BLIS as an option for your truck, then yes.

[@jonconwell2491]

Do you happen to have the part number for these tail lights?

[@mattewalker_]

I do not, unfortunately.

[@JG-sq6jl]

Any update on the video about hyperflash?

[@mattewalker_]

Joey Gamez unfortunately not yet. I’m having issues getting Forscan on my Mac.

[@mattewalker_]

GOOD NEWS! I just got Forscan and will be resolving the hyper flash issue within the week. Make sure you’re subscribed and be on the lookout for that video soon!

[@LivinWith3M]

Awesome mod. Thumbs up! 👍🏻

[@oscarmayer9823]

Thanks for video. Other videos are helpful too. Now there’s something I learned and need to buy. Lol

[@mattewalker_]

Oscar Mayer uploading a new video this weekend!! Thanks for viewing and be sure to check out the new ones!

[@oscarmayer9823]

It would sure be cool if ya did.

[@HotshotTek]

Sub! N sick new lights 👍🏼

[@CaptainJaison]

epic dude!!!! I want to do mine so bad!!!!!

[@parkerd619]

So why did you keep calling it a Tasca harness? It's a ford OEM harness sold by Tasca Ford.

[@mattewalker_]

Donald Parker idk lol I got it from tasca, so I called it the “tasca harness”.

[@achad7777]

Will this work on a 2017 Focus ST?

[@mattewalker_]

It's mandatory to do at least ONE performance mod before doing this install

[@OhhHeyItsAndrew]

So technically speaking you can buy that harness and buy Aftermarket BLIS equipped taillights 🤔

[@mattewalker_]

Yup!

[@23blueisballin]

Sponsor me the tail lights and harness 😅

[@BluRzFTW]

Hey man sent you a DM on instagram!

[@F150EcoBeast]

Nice, I have a video too 😊