The 3 LED Bulbs You'll Need For Your F-150 | CSP Mini, S.V-4, and Carbide Canbus LED Install

[@ChristopherSeaDawg]

I replaced my 2015 F-150 bulbs with GTMOTO. They fit perfect. There LED with fans. Dust cover fits back on with no problem. Twice as bright as stock bulbs.

[@djmigsentertainmentllc7701]

Best upgrade I’ve made on my F150 I got each and every single one of these bulbs, you don’t even need to use the Highbeams when driving in the woods! The one thing I will say is that this installation was nowhere near as easy as they made it seem. You’re going to get into a game of twister trying to go in through the wheel well. Easiest way is to take the headlight off as shown in the demonstration but then that’s a lengthy task. Otherwise very happy with this upgrade, It exceeded my expectations

[@HeadlightRevolution]

Thanks for the feedback.

[@jeffo9147]

Great video! I can't believe how much brighter these bulbs are then the weak stock bulbs. Truly a game changer!

[@HeadlightRevolution]

They really do make all the difference, especially when driving at night! If you have any other questions, just shoot us an email! [e-mail]

[@arizonacolour8793]

@@HeadlightRevolution you didn't show the results of the new turn signal.....

[@Michael-pt8fs]

Just installed this setup on my 16 XLT and they look great...but it's no joke that this is not an easy install. Low beams actually fairly easy but the high beams were a nightmare to seat and get locked in. Definitely glad for the info of this video but be prepared for some bloody knuckles and definitely some swearing.

[@HeadlightRevolution]

Hope it was worth the blood sweat and tears! It's not easy but the outcome is glorious.

[@matthewhostert4126]

Michael can you please message me with the product number for the turn signals. I thought I ordered the correct ones but did not

[@Michael-pt8fs]

@@matthewhostert4126 unfortunately I ended up having challenges with the switchbacks. Was getting hyperflash inside the truck and couldn't get them to function correctly. Ended up returning them after trying 3157 and 7443 size bulbs. Maybe @Headlight Revolution can offer a solution to this as I was really hoping to complete the look

[@matthewhostert4126]

Michael , thanks for the reply. I had the same issue. Unfortunate... It looked great in the video. Not so much in my driveway.

[@turbocadxxx]

You can use free software called Forscan to turn the hyper flash off. Lots of vids on KZbin about it. No resistor needed.

[@gregimusprime7478]

Just bought these for my 2020 f150. Stock halogens SUCK. so until I can afford the morimoto xb's these will do.

[@earl3496]

Where is the link for the turn signal leds shown in this video?

[@popeyez7]

~~~ Yes, we need the LINK or the lite-bulb number... I found 3, but what number ??? Also what style, the standard style or CK.. Both of them is >> # 3156/3157 and the other is a 7440/7443

[@popeyez7]

~~ OK, I think I found what I was looking for. ( I found it way down below on this page ) Is this it ? gtrlighting.com/gtr-lighting-carbide-series-2-0-canbus-7440-7443-led-bulbs-ck-style/ (2017 F150)

[@tmaxson6505]

Ok. I'm a very mechanical person and build my own motors. I have built many hotrods and while the bulbs are very bright and seem like great quality (time will tell), the installation is NOT as easy as the video would lead you to believe. 1) First of all there is an adjustment on the S.V-4 bulbs that takes a very small allen wrench to loosen a set screw on the bulb collar itself which in turn allows the collar cam sleeve to be rotated or slid forward or backwards. This information is critical to know and would have been really easy to include in this video from HR. On our 2016 F150 and 2017 F150 we ran into the same issue on both trucks where when installing the new bulbs and turning them to lock, they would NOT cam over and lock into place without loosening the set screw, adjusting the collar and reinstalling. It's simply a matter of trial and error as to where the collar should be on your truck but we found that keeping the allen screw at approximately 7oclock (when looking at the rear of the bulb) and sliding it forward on the collar about .025 was the sweet spot to allow the bulbs to seat against the o-ring and still cam over to tightly seat in the headlight housing. This may not seem like a big deal but when you are working on the upper (low beam) bulb you cannot see what you are working on and must do this by feel if you follow HR instructions of removing the two 5.5mm bolds and body pin. So here is some help for you. 2) On the drivers side, open the hood, take out the two body pins holding the front edge of the air intake to the front radiator shroud. Then remove the one large bolt holding the air box to the drivers side fender. Disconnect the MAP sensor from the box as well as the two small white clips holding the map wiring to the air box. Loosen the band clamp that holds the air intake tube to the air cleaner box and remove the entire airbox by lifting straight up to overcome the two rubber grommet posts in the bottom of the box. With the airbox out of the way you have easy access to the upper (low beam) light and you are not bending your arm like a circus clown contortionist. 3) For the passenger side, dont even bother with taking off the wheel well liner. Remove the headlight!!! It's easy and once it's out the installation of the bulbs takes literally three minutes. We tried the HR instructions with the wheel well on our first truck but then remembered how easily the headlight assembly comes out of these 2015-2017 F150 trucks. Here is a video if you need some help. kzbin.info/www/bejne/iIOwk5iiect4d6M Happy installation!

[@HeadlightRevolution]

Thanks for the tips!

[@Jerrys_missing_finger]

Man your post is helpful. I got 3 of the 4 in. The passenger side high beam was absolutely battling me. I am try to go through wheel well and it just won't click in. Ended up having to take the headlight housing out. Not too crazy but a pain.

[@mattbrackett8393]

Thanks for this video guys! I have been waiting for this one, it has definitely made me decide on buying the csp minis for my low beams, fogs and the sv.4s for my high beams

[@HeadlightRevolution]

No problem! Thanks for watching!

[@MrWoodhammer]

Drive a 2016 Ford F150 Bulbs do not work, hyperflash in dash. From video install video said the LEDs would work without a resistor or anything else while using the OEM wiring alone. Definitely did not work after plugging in and testing. The dash turning signal arrows were hyperflashing. That's it. LEDs did not produce any illumination. I will be returning these unless there is an explanation on why this happened.

[@HeadlightRevolution]

That's very strange! Shoot us an email and we can figure out what's going on! [e-mail]

[@AnotherJake79]

Is it possible that you just have to take the bulb back out, turn it around and plug it back in? Maybe it has to go one way like some LEDs.

[@MrWoodhammer]

Jacob Smith yeah but that didn’t work. Tried repeatedly.

[@sergioaguayo4944]

I just bought it and has the same issue. Did you figure it out? I’m still undecided if I should return them. It’s just my passenger one though. I flipped the bulb also.

[@sambonefarmer9139]

Can you add a link to the Carbide Canbus LED referenced in the video?

[@wyattbrennan8013]

When I installed mine I couldn’t even use the anti flicker harness because the connector didn’t allow it to fit inside

[@HeadlightRevolution]

That's why we offer extended dust cap covers!

[@stevenn4393]

You get 2 CSP low beam bulbs for the listed price? Low beams fits in 2019 F-150?

[@HeadlightRevolution]

Yes, these bulbs are sold as a pair and we have verified them to fit the F-150.

[@Acw133]

I just bought the csp mini and it required me to buy the anti flicker. Do I not need it?

[@HeadlightRevolution]

You will need it!

[@Acw133]

@@HeadlightRevolution awesome, I was just confused because in the video he did not install it with it hooked up

[@JohnMcMichael-z8e]

I looked through the comments to see if anyone suggested removing the tire to gain better access in the wheel well. Any thoughts?

[@HeadlightRevolution]

Not sure, but removing the tire does help on most trucks!

[@joelane4670]

My f150 does have the yellowish bulbs. I bought it used. But looking through the headlight glass they don’t look like your lights. Any thoughts?

[@HeadlightRevolution]

Reach out to our CS team! 218-755-5200 [e-mail]

[@scottgardner8126]

So does the turn signal bulb also produce the white light to fill in the gap between the highbeam and low beam?

[@HeadlightRevolution]

It does.

[@scottgardner8126]

​@@HeadlightRevolution II found the Carbide canbus on your site but i would recommend linking to that one in description as well. Also - the turn signal light for the F-150 15-17 has some conflicting info about it being an Armor series bulb as well as Carbide 7440/7443 in the descriptio on your site.

[@htx_rc4256]

The morimoto 2 stroke fits just fine with the dust cover on my truck

[@TheMhayden123]

I bet they know that, but Mori isn't their brand, they're trying to upsell their brand before all others

[@HeadlightRevolution]

Morimoto is a great brand! Only some brands don't fit.

[@charleshenson4183]

Morimoto 2 strokes FTW hands down.

[@carlosschein9283]

@@charleshenson4183 Did you install the AntiFlicker harness? If not, does it flicker?

[@andrethier6642]

HR what size do I need for my 2015 f150? They have different sizes starting with the letter H.

[@HeadlightRevolution]

H11!

[@nickricholetti754]

Any radio Interference ? 4 years ago I switched to all LED and I couldn’t even listen to my radio it was all static

[@HeadlightRevolution]

No issues with that with our bulbs!

[@nickricholetti754]

@@HeadlightRevolution hope not. I just dropped $530 on all new high/low/fogs lol

[@jackb.2360]

Why didn’t you install a PMW harness with the CSP mini?

[@HeadlightRevolution]

We found that the F150 does not need a PWM module with the CSP Mini LED bulbs in this application with the High beams!

[@jackb.2360]

@@HeadlightRevolution You used the CSP mini for the low beams though… Do you still not need it?

[@JonathonHorrell]

Do you not need a driver to run LEDs on these trucks? I have a 2018 and was wondering

[@HeadlightRevolution]

All of our bulbs have drivers with them!

[@jeremysmith2870]

Just installed the CSP mini H11 in my 15’ F-150. They came with PWM modules that are pretty large and look like they need to be mounted somewhere with a sheet metal screw. There is no way I will be able to get the LED bulb back into the housing without cutting part of the back of the headlight housing away to accommodate the larger PWM connector and cable. And that would also do away with the dust cover I would like to keep on. I installed them without the PWM modules, for now anyway. Am I going to have problems with these bulbs overheating, flickering, etc without the huge PWM modules?! Wish I would have known this before I ordered them. None of your video(s) show installation of the CSP mini H11 low beam led bulbs with the PWM modules. Very misleading.

[@HeadlightRevolution]

With some trucks, you may not need the additional module. If they're not hyper-flashing now, it's not likely they'll start down the road. The PWM Module can be placed inside the headlight housing so the dust cap cover can be re-installed, mounting with 3M or screws is optional.

[@Alu152]

Good video. Good bulb.people where giving me crap on my bulb tutorial. Glad to see a big youtube channel promoting this.

[@HeadlightRevolution]

I'm glad to hear you liked the video, thanks for watching!

[@HeadlightRevolution]

I'm glad to hear you liked the video, thanks for watching!

[@michaeldempsey6747]

Will the gtr lighting ultra 2 fit in a the 2017 f150 headlight housing low beam?

[@HeadlightRevolution]

Reach out to our customer support team. 218-755-5200 / [e-mail] !

[@TEXMEX505806]

When going to check out for the sv4 it says unsaleable unless for off road only. Why are you recommending this if its not for highway use?

[@HeadlightRevolution]

Because it all depends on your local road laws. In some places they are legal.

[@spooky3369]

Pls send the link for the LED turn signal lights

[@kmslfd]

Kevin Sid, I want to up grade to LED in my 2016 F 150 Lariat. I did it once with a different brand bub and one bulb burned up. Also it went to 1/2 power for a while and also I got dash board warning. So i went back to stock bulbs. I want to try it again, the first bulbs did not have a plug in resister or whatever that piece is. So what now in 2022 do you recommend that will fit great, and wont make the truck Computor send warnings or cause an issue. nd also that will last. Thanks for any help you can tell me. KSID Retired Jake

[@HeadlightRevolution]

Reach out to us Kevin so we can go over details with you! 218-755-5200 [e-mail]

[@jensencaceres9569]

I have a 2016 Ford F-150 XLT for the switch back lights do I need ck or non ck??

[@HeadlightRevolution]

Non-ck for this vehicle! www.headlightrevolution.com/7440-7443-gtr-lighting-carbide-bulbs-LED.BUL.7443.CAR2_2

[@robertbirkahn7089]

how much is the total light package

[@HeadlightRevolution]

Here is the listing for all of our tested F150 products. www.headlightrevolution.com/american_trucks/ford_f150

[@tmaxson6505]

$575 for the high, low, fog lights and turn signal bulbs.

[@gransport4246]

Are the HR S-V.4 H11 the same as the Supernova V.4 H11? If yes, then why are they $99 on Supernova’s website and $209 on HR’s site?

[@HeadlightRevolution]

The Supernova has been updated with new hardware and is now called the S-V.4. Supernova is no longer in production.

[@aireddit6873]

Solid video, very well explained and to the point. Love it! Does this fit on a 2018 F150?

[@HeadlightRevolution]

Yes it does indeed! Thank you for watching, please email us if you have any other questions for us! [e-mail]

[@codyashley5862]

So what is the correct LED bulb orientation for 15-17 F-150s with reflector housings??

[@HeadlightRevolution]

9 and 3! (:

[@Blue6Alpha]

Do these work with the daytime running lights in a 2016 Ford f150

[@HeadlightRevolution]

These do not work as daytime running lights.

[@jamesbergman1188]

Please review lasfit kits

[@HeadlightRevolution]

We will see what we can do for you down the road, we will keep you posted on if we get anything from them! Have a great day!

[@Jerrys_missing_finger]

Got a link for the turn indicator bulbs?

[@HeadlightRevolution]

All links are in the description! 🤘

[@Jerrys_missing_finger]

@@HeadlightRevolution I see 2 of the 3 products linked. I see highs and lows, but not signal bulbs

[@doctornaters]

Anyone install the GTR 2.0 for turn signal in 2011-2014 F-150? Wondering if it will cause hyper flash

[@HeadlightRevolution]

These are headlight bulbs, not turn signals!

[@Melonheadinbed]

i’d love to do this but to be street legal it sounds like i would have to buy an anzo projector style or morimotos. i’ve also read stories about the fans failing and the lights burning up. if i buy these am i gonna get pulled over by a statey for running my low beams?

[@HeadlightRevolution]

Although you will probably not get pulled over, I can not recommend those LEDs to you since they are not street legal. I can recommend those Morimoto XB LED headlights to you, and they will be the best option over all, and they are street legal!💯

[@bradbrunelle7986]

How do the bulbs work in a Ford's projector style housing?

[@tmaxson6505]

They work well however like all LED's make sure they you have positioned the bulbs straight up and down when doing your install. Your yellow LED squares should be facing left and right. Not up and down. This will ensure that the multiple surfaces of the Ford reflective housing are maximized.

[@bradschut9104]

Lights are awesome but getting a lot of people flashing me even though I adjusted them down some. Do I need to lower them more?

[@HeadlightRevolution]

It’s possible, Give it a try and see if it helps. If your truck is lifted at all you may need to go down a bit more.

[@bradschut9104]

Headlight Revolution no lift all stock

[@MrBill1217]

Will these work with the Anzo projection headlights??

[@HeadlightRevolution]

That will depend on the space you have under that dust cover on the Anzo housings, you will need roughly 2.6in of space under that dust cover for those LEDs to fit properly! Let us know if you have any other questions or concerns!

[@calescue1018]

Can you add a link to the turn signal canbus bulbs? I think I purchased the wrong ones on your site :(

[@StoneFlyOutdoors]

Correct me if I’m wrong. This seems like a complete upgrade without having to install anything but bulbs correct?

[@HeadlightRevolution]

Correct!

[@mr.peabody3509]

It appears that GTR doesn’t do turn signal lights other than the video. I have used their web site selection tool to try and find the right bulb but no success. Not even a “turn signal” or “ indicators“ section. Earl below never got his response. I wonder if they are still in business?

[@HeadlightRevolution]

GTR Lighting offers a ton of turn signal products. Email us at [e-mail] and we will help figure out exactly what you need for your vehicle.

[@basicwizz5691]

I ordered the turn signal LEDs and they do not stay seated in the sockets on a 2019 XLT. They work and do not hyperflash, but become very loose and therefore stop working. One of them almost fell into the housing. Anyone have any ideas on a way to make they stay or perhaps a different product?

[@mondo1318]

I clicked the link for the low beam and it won’t allow me to choose “for USA street use”? What do I do? I want these on my F150 like this video. Please let me know.

[@HeadlightRevolution]

Unfortunately the government regulations will only allow for that product in an offroad application. If you would like to purchase those, you will have to select that they are for offroad use, and then you will be able to add them to your cart!

[@mondo1318]

Do you have a link to the headlight assembly (XB LED headlight?) you show on this video at minute 8:45?

[@HeadlightRevolution]

Totally have the link for that product, here it is: headlightrevolution.com/2015-2017-ford-f-150-xb-led-headlights-with-white-drl/

[@alexharkins4638]

What would the best upgrade for my 97 f150? Any help out there

[@HeadlightRevolution]

I would check out the S-V.4! headlightrevolution.com/led-headlight-bulbs/v-4-led-headlight-bulbs/

[@michaelfrank5896]

What I've noticed about all you're videos is you try to push just what you sell and say everything else doesn't work whether you try it or not

[@bluedeval03]

or just order deeper dust covers. Worked perfect for my 2016 F150

[@huguincito47]

My low beam mini led come with an extra electrical harness. Do I have to use it? Which cable is positive or negative? Thanks

[@HeadlightRevolution]

Connect the harness so the red wire goes to the positive lead from the vehicle. Using that harness makes the bulb a bit easier to plug in and install on your F-150.

[@farrismediaproductionsfmp8527]

On the SV4 lights, does the driver get too hot and melt the housing or wiring?

[@HeadlightRevolution]

Heat will not be an issue at all, you will want to stick that driver and PWM module right inside that housing if possible! Let us know if you have any other questions, we are here to help!

[@jldude84]

Awesome video thank you soooooo much for introducing me to the CSP minis, I'll definitely be going that route since there's no housing modification necessary, my only question is, I'm thinking about running a GTR Ultra 2 for the high beam instead of S-V.4 (that was a tough decision by the way) since your other video(s) claim the Ultra 2 is brighter, Is the Ultra 2 brighter in THIS application for high beam only than the S-V.4s?

[@HeadlightRevolution]

In this application, the Ultra 2 will get you more usable light output, and also comes with that lifetime warranty!

[@MattFoster10]

So for the switchbacks what kind did u use in the ford? I have a 2020 but notice it was saying CK or Non CK wiring

[@HeadlightRevolution]

You will want non-CK style bulbs, let us know if you have any other questions! Have a great day!

[@jeepin1964]

What is the actual part number for the low and high beam led lights

[@HeadlightRevolution]

Links are in the description!

[@nathanaydelotte5508]

So the low beam plugs are just plug and go no needed resistors?

[@tmaxson6505]

On the 2015-2017 F150 that is correct the lows do NOT need resistors.

[@carterhamilton5614]

@@tmaxson6505 what about on a 2018?

[@ackemebrown]

What’s the best led headlight bulb for 2004 f150

[@HeadlightRevolution]

We have a couple different options on the website, I would recommend the Ultra 2 out of the two since it produces more light output, and comes with a lifetime warranty! I have linked the page with all the kits we have for your vehicle, shoot us an email if you have any questions! Have a great day! [e-mail] Link: www.headlightrevolution.com/american_trucks/ford_f150/f150_04_08

[@AllTerrain_]

What LED bulbs would you suggest to go with the AlphaRex Pro-Series headlights that I have in my F-150?

[@HeadlightRevolution]

To remain DOT compliant, we would actually recommend going with a brighter halogen bulb. Upgrading to any aftermarket LED or HID kit will not be DOT compliant or street legal. The best halogen bulbs that we have found so far are from Vision X, you can find all of those bulbs here: headlightrevolution.com/headlights/headlight-bulb-upgrades/halogen-headlight-bulbs/vision-x-h-series-halogen-headlight-bulbs/

[@albclef]

What about the fog lights? F 150. 2017

[@rking522053]

They are a huge difference on my 17.

[@myexplorenow]

I want more light for dark roads out west. Are these street legal?

[@robchiste3638]

How do these work if you have projector headlight housing?

[@patoh1679]

They don't. H7bis for projector

[@patoh1679]

H7

[@fordboy85]

Will this same setup work in a 2020 F150 XLT?

[@HeadlightRevolution]

It sure will!

[@fordboy85]

Thank you for the response, would you recommend dome style dust covers though? Thanks again.

[@HeadlightRevolution]

With these bulbs, they're really not needed. You could install them, but they honestly wouldn't help any.

[@Charger8921]

When they are released, will you please do some testing on the VLEDs V6 TRITON LEDs?

[@TheMhayden123]

They've been out for awhile now, they just want to sell their brand before all others, even if others are better

[@pboswo1]

Will the CSP Mini flicker when the running light mode kicks in? If so, what can I use to stop flickering in running light mode? ^i have flickering with LED replacement now

[@HeadlightRevolution]

If that running light is on the low beam, you can install a pair of PWM modules, and that will stop the flickering by running that on full low beam all the time. If that is the high beam, there is no way to safely prevent the flickering without running full high beams.

[@pboswo1]

@@HeadlightRevolution many thanks!

[@HeadlightRevolution]

Any time!👍 Glad we could help!🙌🙌

[@martinmartinez8161]

Is the csp mini clockable? If so, what is the proper orientation for the 2015-2017 f150 low beam?

[@tmaxson6505]

Yes. Read my post above. There is a collar and set screw to adjust. The 2015-2017 position is to have the LED's at 3 and 9 oclock not 12 and 6.

[@HeadlightRevolution]

Reaching out to our CS team would be the fastest way to get some help, give us a call or email! 218-755-5200 [e-mail]

[@Chloe-lights]

I watched the video. Went to website and searched for bulb recommended. Search came back with nothing specific for my vehicle. I can’t find the bulbs to buy.

[@HeadlightRevolution]

What is your vehicle?

[@MOOSE_BMX]

How do you have the high beams and low beams on at the same time ? I turn on my high beams and my low beams shut off .

[@HeadlightRevolution]

Unfortunately, some vehicles have this functionality, and some do not. You could do some custom wiring if you really wanted to get that working though!👍

[@PyleZAP97]

If you have a Ford...there is a Bambi Mode, that can be turned on in the vehicle's computer...using Forscan.

[@asdaven1]

Will the GTR Gen 3s fit in the high beam or low beam here? How does the DD SL1s compare to the Perfect Fits in the low beams? The SL1s fit without any modifications to the dust cover as well.

[@HeadlightRevolution]

What year is yours?

[@asdaven1]

@@HeadlightRevolution 2017

[@Kevin-lm9ex]

Will this work on the f 250 2019 ?

[@gonzosalazar]

Do you have a link or part number to the GTR Carbide Canbus 2.0 LED turn signal bulb as mentioned in the video?

[@HeadlightRevolution]

gtrlighting.com/gtr-lighting-carbide-series-2-0-canbus-7440-7443-led-bulbs-ck-style/

[@TheTheDarkKnight04]

​@@HeadlightRevolution Does the 2018 F150 use the ck style and standard wiring?

[@nickhawes2523]

Link to the plug and play turn signal bulbs?

[@HeadlightRevolution]

Hey man, I have linked those for you right here: www.headlightrevolution.com/2015-2017-ford-f-150-armor-led-turn-signals-amber-1518F150.LED.FTURN_2?quantity=1

[@aquaman0167]

Did we do a before and after with the turn signals?

[@carlosschein9283]

yup. 5:47 - 5:55

[@HeadlightRevolution]

Yep!

[@mattdavies3023]

What's the 4th plug connector for (the black connector between low and high)

[@HeadlightRevolution]

That connector supplies power to the low and high beam harnesses inside the headlight. -Chris W

[@georgejonah9259]

Do you still sell these?

[@HeadlightRevolution]

Sure do, links are in the description!

[@johnmilligan8141]

The GTR website says that the bulb is not street legal.

[@HeadlightRevolution]

Any aftermarket LED or HID kits are not DOT compliant or street legal. If you'd like to read up more about this, here is a great article: betterautomotivelighting.com/2020/06/05/street-use/

[@maxanddad1]

Will these LEDs work for the Americantrucks.com G3 headlight?

[@HeadlightRevolution]

To tell you that for sure, we would need to either have images of the area where you install the bulb on that headlight, or the headlight itself so that we can test the fitment. The issue is that with a lot of the aftermarket housings out there, they do not give any room for the bulb under the dust cover, and with almost all LEDs on the market these days you will need to have room for a heatsink inside the headlight. HIDs will totally work for you though, as you drill holes in the dust covers and run the ballast on the outside of the headlight housing!

[@sukhjotsingh4569]

Could I use the 9005 low beam headlight bulb for a 2015 Toyota Rav4

[@RenzAzn274]

Sukhjot Singh yes you could

[@HeadlightRevolution]

Sure can!

[@NordicViking88]

STILL WAITING ON THE ALPHA REX HEADLIGHT VIDEO FOR THE 2018 F150 THAT YOU WERE WORKING ON DOING A REVIEW ON.

[@HeadlightRevolution]

Still in the works! We'll have it out asap.

[@RealityShifter1]

@@HeadlightRevolution Did this ever get done? I ordered a pair and wondering if I have different bulb options with that headlight. F150 2016.

[@bradschut9104]

Will the headlights need to be adjusted at all going from stock to these if my beam pattern was good before? I know they are much brighter does that change anything?

[@jeremys8360]

Brad Schut not too much. Just park your car close to a wall, mark the original beam, install, measure and aim as needed

[@bradschut9104]

Jeremy S getting a lot of people flashing at me......

[@jeremys8360]

Brad Schut what kind of vehicle?

[@bradschut9104]

Jeremy S 2016 f150

[@jeremys8360]

Brad Schut on flat, level ground, measure the height of the beam right in front of the car. Back the car 25 feet away and see how much lower it is. It should be 4” low on the left and 2” low on the right at 25 feet

[@takeitallin6882]

Chris would these also work on the 2016 f350 dually? Thx

[@HeadlightRevolution]

They will not, the F350s take different bulbs. Here is everything we have for that truck though! headlightrevolution.com/vehicles/ford-super-duty/ford-super-duty-2008-2016/

[@takeitallin6882]

@@HeadlightRevolution thank you for that quick reply!

[@HeadlightRevolution]

Not a problem!

[@KidNaknek]

thank you!

[@HeadlightRevolution]

You're welcome! Glad you found the video helpful.

[@davidl.2853]

Hey HR, do you know if the '18+ F150's low beam have changed/fixed the issue of limited space for a LED bulb aside from the Mini CSP bulb?

[@HeadlightRevolution]

For the 18+'s, you can go with the S-V.4's. They fit and perform very well! headlightrevolution.com/2018-ford-f-150-sv-4-led-low-beam/

[@smashings7523]

Yeah where is the link for the turn signals?

[@HeadlightRevolution]

They are on this page: headlightrevolution.com/vehicles/ford-f-150/ford-f-150-2015-2017/exterior-lighting-upgrades/

[@phatnguyen24]

I have the XLT truck 2020 I need that set please

[@HeadlightRevolution]

Hey there, thank you for commenting! You can find all of those headlight kits, and all the other kits that we carry for your vehicle right here: headlightrevolution.com/vehicles/ford-f-150/ford-f-150-2018/

[@Sagittarius-88]

Were the headlight housings re-designed for 2018 and up? I was told on another video by one of your reps that the sv-4 will fit my 2020 F150 without issues. Was there in fact a change in headlight housing design for 2018 and up?

[@HeadlightRevolution]

Yes, The F-150 body style changed entirely in 2018. The 15-17 were the same, 2018 was totally different. Here is what you need to watch: kzbin.info/www/bejne/iGKUi5afqbiLl80

[@Sagittarius-88]

@@HeadlightRevolution Appreciate the info. Definitely looking to upgrade from stock, and the sv4 was first on my list providing the fitment was correct. I'll check these out on your website.

[@mauricioesquivel4009]

The s v 4 fit on gmc sierra 2014?

[@HeadlightRevolution]

Yep! Just make sure you get the H11 for your Low Beam and 9005 for your High Beam.

[@mauricioesquivel4009]

@@HeadlightRevolution two different beams?

[@bendeco]

It would have been great to have shown how to do this with the light in the truck because I'm pretty sure that it's not that easy.

[@HeadlightRevolution]

We do have install vids on our channel. Thanks for the feedback though.

[@AnotherJake79]

Will those LED bulbs work well in the Anzo housings on my 2017 F150?

[@HeadlightRevolution]

The S-v.4 bulbs do not fit in the Anzo headlights, and we have not confirmed if the CSP Minis fit or not. The best LED bulb that we have found so far for the Anzo headlights are the Morimoto 2Stroke 2.0. headlightrevolution.com/led-headlight-bulbs/morimoto-2stroke-2-0-led-headlight-bulbs/

[@davesicarddts]

No canbus will result in passenger light not working???

[@charleshenson4183]

Highly unlikely. That's a ram truck issue

[@matt538]

How come the company supernova led sells sv4 low beams for f150 but you guys do not

[@HeadlightRevolution]

We actually filmed a comparison video between what they sell and what we sell because people ask about the difference so often. It’s on our channel, You should check it out!

[@matt538]

Headlight Revolution can you send me a link

[@HeadlightRevolution]

kzbin.info/www/bejne/qYrMfKOhj9-EhJY

[@matt538]

Headlight Revolution thanks too bad you guys don’t make the sv4 for 2016 f150

[@edgarlobato2748]

What about fog lights??

[@HeadlightRevolution]

The CSP Mini in 9005 works very well! The Morimoto XB LED housings are sweet too. I have them in my F150. -Chris W

[@therealb888]

What distance are you taking the lux measurements at?

[@HeadlightRevolution]

25ft

[@sammendoza5453]

awesome,im learning alot from you guys,thnks,God bless,

[@HeadlightRevolution]

Thanks for watching Sam!

[@natecannon76]

It wont let me purchase unless i slect offroad?

[@HeadlightRevolution]

This is due to there not being any LED or HID kits that are DOT approved. If you use your truck strictly for offroad use, you can select that and it will allow you to purchase them.

[@natecannon76]

@@HeadlightRevolution i city drive

[@HeadlightRevolution]

In that case, to remain compliant, going with a good set of halogen bulbs will be your best option!

[@pauuuuul87]

Difference between GTR Lightning CSP Mini and Supernova Perfect Fit?? They seem to be the same led, same design, shape, led diodes... even your description page is the same, but with different branding: headlightrevolution.com/headlight-revolution-led-headlights-9006-bulbs/ headlightrevolution.com/gtr-lighting-csp-mini-led-headlights-9005-9145-bulbs/ LE: The PerfectFit even has a lower price and lifetime warranty

[@vincevirina425]

what about for 2018?

[@HeadlightRevolution]

set up slightly differently!

[@forgottencoastliving7923]

Anyone have the link to the turn signal bulb

[@HeadlightRevolution]

Which one specifically are you referring to?

[@jmillionaire88888]

He was looking for the GTR 2.0 carbide series canbus that he talks about in the video it’s not linked and he didn’t say the bulb type (number) in the video and it’s not on the web site under the F150 category

[@artwells778]

Newb to the channel and found this video as im looking for upgraded bulbs. My question is if these are not "Street legal for headlight use" are their any reported issues with the man giving a crap about us using them? I could not care less about being "street legal", just curious.

[@HeadlightRevolution]

To be honest, the man typically doesn't care.

[@martinmartinez8161]

Will this work with drl?

[@HeadlightRevolution]

It sure will!

[@stevecicc6370]

Great video! thanks. Have you tested JDM ASTAR 1:1 Design H11 for the '15-17 F150? ? They have a very similar profile

[@jeremys8360]

Steve CICC those have a fan too I think

[@Davidblaine18]

What about 2018

[@HeadlightRevolution]

Here you go www.headlightrevolution.com/american_trucks/ford_f150/f150_18_20

[@Davidblaine18]

@@HeadlightRevolution what

[@79random]

Nothing about changing the headlight bulb (or assembly for that matter)in a newer F150 is easy! Though it may be with a hoist and removing the wheel. Nothing with ever beat the east of my 2003 Chevy was.

[@HeadlightRevolution]

Yeah it's one of the more inconvenient ones.

[@matt538]

I ordered the csp mini low beams and the v.4 high beams just like the video but my csp mini came with a wire harness and oversized rubber dust covers do I need these for install?

[@HeadlightRevolution]

Hey Matt, use that wire harness with the CSP Mini bulb between your factory wiring and the bulb itself. It allows for a proper fit between the connectors. You may need the larger dust cover, Many of our customers don’t need it but we include it to be safe.

[@huguincito47]

@@HeadlightRevolution My low beams mini led came with an extra wires. Do I have to use this electrical extra harness?? Thanks