One of the best trending water-cooling PCs ever is the Lian Li 011 dynamic series. Really great case.
@STechV3 жыл бұрын
Agreed.
@stetson9993 жыл бұрын
I’m starting a build with this case tomorrow night. Extremely helpful info - thanks!
@STechV3 жыл бұрын
Glad it was helpful!
@wolphin7322 жыл бұрын
The EK-Quantum Torque Drain Valve would work without needing the extender at all and is much shorter and doesn't need the pump to be moved.
@AMF12 жыл бұрын
Just purchased this case and distro plate, so video was very useful Thank you, Ady
@STechV2 жыл бұрын
Glad it was helpful!
@kandyrew3 жыл бұрын
great video. The problem with ek’s front distro plate is that it does not allow enough clearance for fans to be mounted in front of the side mount. If you want fans in that position you’ll need to install them in the back side of the chamber, which will work fine but imo doesn’t look as good
@STechV3 жыл бұрын
Absolutely correct. I completely forgot to mention that in the video. Thanks a lot for highlighting it. When you mount the fans in the backside, you won't be able to get the max out of the ARGB effects. But, no effect on the airflow.
@Zzafari73 жыл бұрын
holy shit i found your channel again after 2 years, i used to watch you back during season 2 of apex
@JackilusMaximus3 жыл бұрын
@@STechV So, I guess if you are running the front distro plate you can run three intake fans on the bottom, one intake on the back, and three exhaust on the top?
@synnair3 жыл бұрын
@@JackilusMaximus thats correct. But I would actually use the fan on the back for exhaust aswell...
@devadavey3 жыл бұрын
@@STechV Would the front mounted distro plate be big enough to hide some brown Noctua fans?
@dingjiahua65393 жыл бұрын
best vedio on how to build a custom water-cooled Lian li o11 xl thx
@STechV3 жыл бұрын
Thank you :) . Keep in touch with us.
@rbrown29252 жыл бұрын
Wonderful details to know. Thanks so much for posting.
@STechV Жыл бұрын
Glad you enjoyed it!
@Zzafari73 жыл бұрын
fantastic vid, especially for beginners like myself doing a very similar build
@STechV3 жыл бұрын
Thank you and glad I could help
@TransientCode3 жыл бұрын
Just the video I was looking for, thanks for taking the time to make this!
@STechV3 жыл бұрын
Thank you for watching. Keep in touch with STechV.
@IamAshL3 жыл бұрын
Fyi the motherboard extension is only required for the ROG Dominus and motherboard of that size. You don't need it for just an e-atx motherboard.
@STechV3 жыл бұрын
Thank you for highlighting it. I've just noticed that this panel is required only for EEB motherboards. I'll update this in the description. Thank you again.
@CalaisRider3 жыл бұрын
Excellent overview and key information. Well done, thanks for taking the time and posting.
@STechV3 жыл бұрын
Thanks for watching!
@kev1nroy2 жыл бұрын
Very helpful, thankyou.
@STechV2 жыл бұрын
You're welcome!
@cabincontrol3 жыл бұрын
I've build in the same case. Loving it. Just air cooled for now, but will design a custom loop later down the road. A couple of things to point out from your build. Some are just nit-picking. 1. I know you addressed this a little, but the air you have coming into the case from the bottom is still going to be heated by the radiator a bit and then being pumped into the case. Not the best start for air flow. I'd have installed the front distribution plate you talked about and had the second rad also pushing out but from the back. Then just have 3 fans on the bottom pulling cold air in. 2. You should also remove the dust filter from the top as it restricts the air being pushed through the top radiator and isn't needed as the air is being push out, not pulled in. 3. Great tip in removing one of the drive bays. I've done this too. For as much room as there is in the back, having more space for cables is always good. I have 10 rgb fans, so 20 cables, 2 controllers and one hub needed to go somewhere. 4. Regarding the front rgb strip. I have an Asus Strix mb and at first couldn't get it controlled through that. I have most of my fans controlled through Corsair icue. To get the front strip to work in icue, I had to get a customs cable adapter and program it as 3x10 rgb strips. Works like a charm. Great video.
@STechV3 жыл бұрын
Thank you for watching and the comment too. Really appreciate. 1. I already purchases my G1 distro plate before knowing about the front distro plate. And, it's not that easy to setup side back radiator. It has very limited space and very low headroom for tubing. But, it's be nice. And, the bottom radiator doesn't generate much heat. So, I'm still OK with pulling air through it for now. Worst case, I can add the back case fan for extra fresh air. 2. That I can agree. I let it be there as my temps were still OK. 3. Yeah. I also have two fan hubs and two ARGB hubs. Both are stick to the back cable concealing ( and extra HDD ) panel. It's pretty good and organized, but I've to remove all the cables if I wanna remove that panel 4. Yeah. casing's RGB controller circuit has extra port for ARGB connection. If you can get the adapter sorted, you can easily use it. Cheers,
@file1man3 жыл бұрын
what, specifically, custom cable adapter did you use fpr the asus strix mobo did you use in the lian li 011 xl case to work its from rgb strip thru the corsair icue
@cabincontrol3 жыл бұрын
@@file1man don't know if I'm allowed to share links, so I'll just tell you. Search ebay for "Corsair RGB to Standard ARGB 3-pin 5V Adapter (MALE)", for lighting node Pro and commander Pro. Connect it from the cable coming off the control box inside the case, to (in my case) the commander Pro. In ique, set it up as 3 x 10 led strip. Then set the profile up to be something easily distinguishable and press the cycle profiles button on the from of the case until you see the profile you set up. Job done.
@STechV3 жыл бұрын
Thank you Ben for the help and support. Yeah. That would work with your iCue. But I'm using a simple "Cooler Master ARGB splitter (passive)" to connect all my ARGB devices with two ARGB headers I've in the motherboard ( Since I don't have iCue )
@Walhor3 жыл бұрын
Thanks for the ARGB hint. I had no idea how to control it until now
@STechV3 жыл бұрын
Glad I could help.
@WH7.2 жыл бұрын
how can i control it ? i have msi z490 gaming plus motherboard
@Walhor2 жыл бұрын
@@WH7. you put the 3 pin argb cable into your motherboard and then cycle until you get to the one you can select with software and then use msi rgb software to do so
@bennyboy686953 жыл бұрын
If you use the front distro plate can you still mount the GPU vertical and have a bottom rad ? I assume not
@STechV3 жыл бұрын
Yes you can. Thickness of rads may, the "pipe work" little more complicated. But still it's possible. There a plenty of builds I've seen with that same setup.
@WRSTxPumbaa3 жыл бұрын
Very nice video. The air bubble in the distro plate bugged the hell out of me every time I saw a build of the o11dxl.
@STechV3 жыл бұрын
Thank you and same here. Problem is, in first few weeks, no matter how many times you top up, micro bubbles will be collected on top of the reservoir and create a small bubble.
@DrWiley-fm3ik3 жыл бұрын
great video you answered questions I didnt know I had!
@STechV3 жыл бұрын
Glad I could help!
@HansImWald3 жыл бұрын
This was a very excellent video! Thank you very much!
@STechV3 жыл бұрын
Glad it was helpful!
@daveninjaneuro70893 жыл бұрын
Nice video, thanks!
@STechV3 жыл бұрын
Glad you liked it!
@fisherman38613 жыл бұрын
This was really helpful. I am looking to do a similar build. Thanks!
@STechV3 жыл бұрын
Glad it was helpful!
@jdwonders47723 жыл бұрын
I just bought this case and I’m trying to find the best motherboard to put in it. I want to go with a white or silver motherboard but it also needs to have the hookups at the front for USB type C ports
@STechV3 жыл бұрын
It's all depending on the brand you pick. This casing supports all types of motherboards. You can pick the motherboard with best features and aesthetics under your budget.
@travisa15433 жыл бұрын
This is good work, Thank you for sharing your analysis!
@STechV3 жыл бұрын
Thank you !
@coslove88663 жыл бұрын
Very useful! Thank you.
@STechV3 жыл бұрын
You're welcome!
@romanpirschel30533 жыл бұрын
Thanx, helpfull, especially with this back cover plate and filling up to the edge :-)
@STechV3 жыл бұрын
Thanks and glad it was helpful!
@dtog333 жыл бұрын
BUT, when it comes to appearance, there is NO denying prior to me talking about how well it's made, how it has the best airflow, It's pretty.
@STechV3 жыл бұрын
And so many options to design your build.
@haitiankid4lyf3 жыл бұрын
Great video extremely informative
@STechV3 жыл бұрын
Glad you think so!
@latrell3363 жыл бұрын
Thank you so much for this 10/10 video!!!
@STechV3 жыл бұрын
You're very welcome!
@dirtvalle3 жыл бұрын
I think the Bottom radiator can be bigger if you just move up your mounting bracket up two more slots
@STechV3 жыл бұрын
We cannot move the vertical GPU bracket up without making it unstable. It fits to the exact same place, not anywhere else.
@dirtvalle3 жыл бұрын
So I bought a 60mm Radiator do you think it will work? I mean the gpu mount has holes in it (the bracket slots) and it only cover 1,5 fans
@STechV3 жыл бұрын
you meant to mount the vertical GPU mount to on the fans ? You can try, but it won't be stable. Best option is, you can go for the EKWB's vertical GPU mount. You can move it little more further up. Or you can mount your GPU horizontally.
@benta003 жыл бұрын
If you install distro plate on the front you won't have space for radiator and fans on the side because of the distro plate pump. So you can install only fans in the internal part of the side
@STechV3 жыл бұрын
Thank you for the correction. Just wondering, since internal side has 55mm, can't we install a EKWB SE 360 (slim triple) which has 28mm thickness with fans (25mm) all inside ?
@benta003 жыл бұрын
@@STechVI don't know. I only know the distro plate pump takes the place of the central side fan.
@benta003 жыл бұрын
@@STechV I decided not to buy the XL version because you can't do that. So I bought the normal version for a basic pc.
@STechV3 жыл бұрын
Oh. That's too bad. I also cannot guarantee how easy to fit the rad and fans ( in the internal chamber part ) with front distro plate. Technically it should be possible to do.
@benta003 жыл бұрын
@@STechV you can try. i don't have it so i cannot
@Syronlol3 жыл бұрын
hi i heared alot of ppl that said the distro plate is very loud with the DDC 3.2 Pump is that true?
@STechV3 жыл бұрын
I've answered it in the other video :)
@adventuresofuz Жыл бұрын
If you have e-atx MB you cant have 3 fans on the side? Or is that only if you get the attachment?
@ZoneProduction4482 жыл бұрын
Great tips. will the Vertical mount fit into the Lian Li Dynamic?
@STechV2 жыл бұрын
Yes it is. But careful on the gap it'll leave in the bottom. There won't be much space for a bottom radiator.
@ZoneProduction4482 жыл бұрын
@@STechV Thanks. Also, can the mount be vertically moved up to allow clearance for the radiator?
@STechV2 жыл бұрын
LianLi vertical mount is not possible to move up or down. If you want a vertical mount with better clearance, you can go for EKWB's vertical GPU holder.
@heeku_3 жыл бұрын
I think you are wrong about the E-ATX extra support item, it's not a must, prbably only for the specific rog dominus extreme, I have seen many z390 maximus xi extreme users without the support bracket. Consider checking it so people who watch this will understand it. Thanks for the nice video of course : )
@STechV3 жыл бұрын
You're correct. This was highlighted by another viewer as well. So, I've already mentioned it in the video description. That extension panel is just for EEB motherboards. Thank you for highlighting it.
@rajeshkannan_s3 жыл бұрын
Quick question - can you install the vertical mount in the top 5 slots instead of bottom 5 slots?
@STechV3 жыл бұрын
Unfortunately you cannot install this GPU vertical mount anywhere else that this place. But, if you go for a EKWB's vertical GPU holder, you'll get that freedom.
@johncena51623 жыл бұрын
One Question It Has Two USB 3.0 connector but most motherboarfs have one usb3.0 headers is there a way we can connect the second USB 3.0 connection to the motherboard by using some sort of adapters help will be appreciated
@STechV3 жыл бұрын
There are USB 3.0 Y splitter cables are available to purchase. But, I kept it disconnected as splitters shares the data channel and USB ports I had ( front and back ) were more than enough for me.
@Galactic-Bulge3 жыл бұрын
Need the same thing with lian li o11 dynamic (not xl)
@STechV3 жыл бұрын
It's also a great casing. But mind the dimensions when picking radiators.
@BadGamerLP3 жыл бұрын
Cool build, I actually want to copy it. But won't the overall heat in the case warm up the water to much for the CPU in the top radiator?
@AJ-bi6ns3 жыл бұрын
It’s a complete loop, both rads cool the loop. With the top fans pushing out it’s safe to say there’s good air turnover in the tank, minimal impact on heat of loop.
@STechV3 жыл бұрын
If you have a good airflow inside the casing. It actually not an issue.
@revolutionaries0073 жыл бұрын
Hi I loved you video's . I am making a build with thi full tower from li -lian exact case ... I was wondering how much did that water cooling kit cost as I am trying a very similiar build with a 3080 ... I never did water cooling from scratch. (would buy them sealed) I been building PC's for 26 yrs now and I am ready to water cool the whole thing like you did... that was such a great video ... I just need to see how much that water cooling kit you installed will set me back financially. thank you for answering me. Cheers P.S.I didnt order the case yet, do you think this full Tower is a great case for water cooling as I have a strict budget. cheers again
@STechV3 жыл бұрын
Hi Danny, Thank you. For watercooling parts for this system has listed in this video ( description ) : kzbin.info/www/bejne/lWSTk6Cvg5hoj5Y For this setup, it was cost around USD1000-1250 for me. But, prices may vary depending on the shipping cost and the tax. with regards to the casing, it's good to choose a case that is watercooling friendly. So, it won't be much complicated and save some budget when routing pipes and placing radiators.
@andreasdinnebier48083 жыл бұрын
Hey there - cool Insider-Video! A question regarding the vertical gpu Adapter. By using this are the hdmi/Displayport-Connections without any Problems possible?
@STechV3 жыл бұрын
Thanks. Yes, all ports can access from outside without any issue. And it's neat and clean too. No open holes or anything.
@creativestarfox3 жыл бұрын
I wonder what your thoughts are on the new Lian Li Uni Fans.
@STechV3 жыл бұрын
I think they are pretty awesome and easier with fan/argb cable management. Air pressure also good so they'll work better with radiators too. But, as the disadvantage, it need their software to manage.
@samihamouri3 жыл бұрын
15:15 , how is warm water coming out of your gpu if its not waterblocked ?
@STechV3 жыл бұрын
My apologies. The question is not quite clear to me. You need to know the temperature of the water going to the top radiator if GPU is not watercooled ? If yes, It'll be +2 to +5 degrees than the room temperature.
@cuneytrozdemir3 жыл бұрын
if you are doing exhaust from the top, do you still need radiators?
@STechV3 жыл бұрын
Yes, It's always better to have a radiator on top. Specially, it looks nice with distro plate. Since my GPU is also watercooled, top radiator doesn't get that much of warmer airflow.
@gotcha23433 жыл бұрын
Great video! If you later integrate your graphics card into the system, do you have to empty the whole system beforehand?
@STechV3 жыл бұрын
Yes, exactly. But, since I'm going to use the same coolant variant, just draining the coolant and re-fill is sufficient.
@gotcha23433 жыл бұрын
@@STechV Thanks for the quick reply
@DainHunter3 жыл бұрын
Thank you for this video! Just to be clear: 1. Does the side distro plate fit if im using a e-atx mobo? 2. Under your bottom radiator there is a white frame, is it just for fan spacing? You got a sub from me :) take care!
@STechV3 жыл бұрын
Thank you ! 1. Yes. 2. Yeah. You can mount your fans or radiator on that bottom plate. Thank again. Take care !
@nikolaos33613 жыл бұрын
Great vid mate! I've just got a question, I've been looking for a temperature sensor (either G1/4 or one to plug into a distro). Any recommendations?
@STechV3 жыл бұрын
Thanks a lot. You can use any 10K, G1/4 temp sensor. I've used "Barrow G1/4" 10K Temperature Sensor Stop Fitting" to test the loop performance. They are good and works properly. But I don't recommend their flow meter with display as they are not accurate most of the time.
@nikolaos33613 жыл бұрын
@@STechV thanks so much for the response! Your build looks so great (and your tutorials are fantastic!). Thank you!
@willboy1013 жыл бұрын
Great video mate. I have this case and am using a Asus ROG strix Z490-A Motherboard inside which only has x1 19-pin USB 3.1 header.. I’m not sure how best to plug in the x2 USB 3 cables that come integrated in the case? Is there a Y splitter or do I need to install a PCIE USB 3 card hub?
@jasgill71213 жыл бұрын
If your motherboard didn't come with a usb 3.2 header then it won't work at all.
@STechV3 жыл бұрын
Thank you. I also have only one USB 3.1 header. So, I actually leave the bottom USB ports disconnected. It was OK with me as I never wanted that many of USB ports. You can use a splitter, but I don't recommend it as it'll share the same data bus.
@crossfireplayerx3 жыл бұрын
Nice video. I am going to build a Lian Li o11 dynamic XL and already got the Distro Plate von Lian Li. Now choose the radiator and the rest. Where do i find the plate under the Distro Plate, to cover the hole? Thank you for your good videos, to help other people. Keep going
@STechV3 жыл бұрын
Thank you! It's one of the metal plates comes with the XL case ( which you removes to install the distro plate ). I'm just installing one of the back.
@crossfireplayerx3 жыл бұрын
@@STechV Ty for your fast answer. I have 2 x 360 Radiator 40 mm, the Distro Plate G1, 6 LL Corsair fans. How many fittings and what fittings do i need? What fluid should i use? I will take 16 mm tubes with 12 mm inside diameter. I really need help, planing all of that.. :( . If you could list these things, that would be awesome.
@STechV3 жыл бұрын
Sire. I can help. But these fitting are for a similar build like mine. You can have your own customization with difference set of fittings if you 'd like. Fittings you'll need (These are EKWB parts, if you want you can find same fittings in different brands) : EK-Quantum Torque 6-Pack HTC 16 : 3 packs EK-AF Angled 2×45° G1/4 : 2 units EK-AF Classic Angled 90° or EK-Quantum Torque Rotary 90° : 4 units EK-AF Extender 50mm M-F G1/4 : 2 units ( CPU block extenders. You can go for shorter extenders like EK-Quantum Torque Extender Static MF 28. It's not a must to have, if you can bend the tube directly to the CPU block. ) EK-Quantum Torque Extender Rotary MF 14 : 1 unit ( for drain port valve ) If you're going to use PETG tubes, don't forget to buy, EK-HD PETG Insert 12/16mm (10pcs) : 1 packs And you'll need a ball valve for the drain port, EK-AF Ball Valve (10mm) G1/4 : 1 unit Nice to have items : Filling Bottle (1000mL) : 1 unit EK-Leak Tester : 1 unit EK-CSQ Plug G1/4 with EK-Badge : 1 unit ( for extra safety of the ball valve ) EK-HDC Fitting 16mm O-Ring (6pcs) & Outer G1/4 Fitting O-Ring (6pcs) (extra O-Ring packs) Clear soft tubes + 2 x matching barbed fittings ( to drain the system )
@crossfireplayerx3 жыл бұрын
@@STechV oh wow. Thank you for that list. I look at the parts soon. The amount of fittings are 1/1 correct right?
@STechV3 жыл бұрын
No problem. Yes, these are what I was using in this build. And for coolant, you can use EKWB CryoFuel Solid Concentrates (1L would be sufficient)
@TorvenAU3 жыл бұрын
Hey @stechV I was looking at pc part picker just checking things and noticed that the motherboard you suggest cant support all the usbs at the front of the case "ian Li O11D XL-X ATX Full Tower Case has a front panel USB 3.2 Gen 1 Type A port, but the Asus ROG MAXIMUS XII HERO (WI-FI) ATX LGA1200 Motherboard does not have sufficient USB 3.2 Gen 1 headers. The case USB 3.2 Gen 1 Type A port will not be usable. what did you to fix this or did you leave say the bottom two unconnected ? thanks as im unsure what to do when all my stuff arrives thanks again :)
@STechV3 жыл бұрын
You're exactly correct. This motherboard has only one USB 3.2 G1 header. So, the bottom 2 USB ports aren't connected. Since the motherboard has 4 x USB 3.2 Gen 1 ports in the back, for me two front ports ware more than enough.
@TorvenAU3 жыл бұрын
@@STechV yea exactly 4 is not needed really ill do the same
@mshario15293 жыл бұрын
Hi is there a difference between EK-Classic DP Side PC-O11D G1 D-RGB + DDC 3.1 PWM and EK-Classic DP Side PC-O11D G1 D-RGB + DDC 3.2 PWM? If the difference is insignificant Shall I go with the Dp with 3.1 Pump because it available in my area or wait for the Dp with 3.2 Pump? Because it is not available even on EK web I need to wait until the 18 of Feb?
@STechV3 жыл бұрын
I think it's better to wait and for for 3.2 as it has higher performance. But, if you are going to use you DP with 1 radiator or without GPU, then 3.1 should be OK.
@mshario15293 жыл бұрын
Thanks am gonna use it for the cpu for the moment
@gonzolak833 жыл бұрын
Hi. Great videos. Thank you for that, help me to visualize how to plan my custom loop. One thing I must point out tho. You can't use EK-extender rotary mm14 like you suggested to use on drain because you won't be able to close back cover case (few mm missing) - I learned the hard way hehe. You got it right with 6mm extender that's why you are able to close back cover:P
@STechV3 жыл бұрын
Thank you. Are you using EK's ball valve ? I think it has sufficient (very tight that you cannot install extra stop fitting ) space to fit a rotary extender. I did some measurement before the video and saw some builds with it. Apologies If I'm wrong here, but I'll double check again and confirm.
@OnklSpidy3 жыл бұрын
@@STechV yes would be nice to know that 👍🏽
@tomfoolery30373 жыл бұрын
Do you recommend any other front distro plates than the EKWB one? The EKWB has a design flaw that the pump is to far to the left, leaving not enough space for fans on the bottom back of the case. I saw a couple on ebay but I am just not sure.
@STechV3 жыл бұрын
For Lian Li O11D XL version, there are only limited front distro plate options to go. Among them, EKWB is the only distro plate I can recommend. If you really want to mount fans on side, you can install them from behind of the side fan panel. But it won't look nice as installing them on front.
@tomfoolery30373 жыл бұрын
@@STechV First thanks for the videos you make. Im looking to use this case for my first water cooling build. What about if we flip the distro plate 180 degrees for the pump is on the top right side? Do you think that would even work?
@STechV3 жыл бұрын
@Sinister [GD] I think the size doesn't match with the Lian Li O11D XL. So, I don't recommend to go with it.
@STechV3 жыл бұрын
@@tomfoolery3037 You're welcome. And yes, you can flip the distro plate 180 degree and it'll work. BUT, I don't recommend to do that, as it'll be harder to fill the reservoir without letting air goes inside the loop and even during the long run, it has higher chance of entering more air bubbles to the loop.
@surft3 жыл бұрын
Any solution to cooling the hard drive caddy's at the back?
@STechV3 жыл бұрын
These is not proper solution, but you can remove one HDD bay unit and install a Noctua 80mm fan(s) in the back. Fans size is not 100% sure, but Noctua has 120, 92, 80 , 60 and 40 mm fans. So definitely one of them would fit.
@surft3 жыл бұрын
@@STechV That is kind of dissapointing since I hear that it can get quite hot especially since it's an enclosed space. Hopefully they fix that in the next iteration
@STechV3 жыл бұрын
That's true. It'd be better if there a ventilation method available for back side chamber. And I've a SATA HDD installed there. Will let you know the temps.
@stalker15673 жыл бұрын
Hey bud will the be water back plate you have work with the corsair hydro x system? Sorry I'm a newbie for water cooling. Have the same case on order.
@STechV3 жыл бұрын
I'm sorry. I didn't get the question. Could you please elaborate little more ?
@stalker15673 жыл бұрын
@@STechV sorry maybe a typo or two. My question is about the water block on the back of the case. I wanted to know what fittings you need to have to fit it. Ie what tube and valve fittings. I want to use the corsair hydro x 14mm hard piping with all the corsair water stuff however thier range is a bit boring and doesn't have alot. So I wanted to ask if this water block you have used could fit a corsair hydro x water build. I've done a water build before so am unsure on how the sizing works with the piping/tubing fittings. Hope thats abut more clear.
@blackspectre60093 жыл бұрын
Can you add English subtitles, please?
@STechV3 жыл бұрын
Hi, my apologies for the inconvenient caused. I'm working on adding the subtitles. I'll publish it as soon as I finish typing it.
@AJ-bi6ns3 жыл бұрын
Did you have to buy plug for the distro plate?
@STechV3 жыл бұрын
I'm sorry, what plus you've mentioned here ?
@AJ-bi6ns3 жыл бұрын
@@STechV Sorry typo - Plugs
@STechV3 жыл бұрын
Yes, it comes with all required plugs.
@TorvenAU3 жыл бұрын
Awesome video I'm trying to do a similar build it just looks so good but I have one question in the first video you used a slim coolstream radiator in the bottom and a pe 360 in the top, my question is do you now recommend a pe 360 coolstream triple in the bottom and a xe360 coolstream triple in the top or should I use both pe 360s ? Thank you sorry if this is confusing !
@STechV3 жыл бұрын
Thank you. And apologies for the confusion. I do recommends PE360 (triple) for both top and bottom (If you're planning to have Lian Li vertical GPU kit). Else, you can have XE360 (triple) on bottom with push-pull fans.
@TorvenAU3 жыл бұрын
@@STechV yes I've purchased the waterblock for my 3080 and was going to purchase pe slim for the bottom but now I'll change it to the pe360 thank you for the advice, great vid I've subbed to you as well!:)
@STechV3 жыл бұрын
Great. Good luck for your build. Thank you for subscribing.
@file1man3 жыл бұрын
@@TorvenAU so did the pe360 rad, not the pe 360 slim work in the botton of your 011 lian li case? im thinking of using that case.
@TorvenAU3 жыл бұрын
@@file1man hey mate havent been able to do my build just yet i have pretty much everything except for my 5900x cpu so havent attempted anything yet other than cleaning my radiators but i do have both the pe360 rads with me and hopefully they fit haha
@devadavey3 жыл бұрын
Is there enough clearance to do push/pull on top with 25mm(fan)+38mm(PE rad)+15mm(slim fan)? Would adding a 25mm(fan)+60mm(XE rad)+25mm(fan) on the bottom be good or overkill for a 3090+5950x (light to medium OC)? Thanks! Subbed
@STechV3 жыл бұрын
Yes you can. But it'll be too close to CPU power connectors. But,with good static pressure fans (e.g. EK Vardar), you can opt out from the push-pull setup. 3090+5950x will generate around 600W heat with medium OC. So, 2 x PE360 (500W) are more than sufficient for you setup. XE360 itself can provide up to 668W cooling power which is a overkill for your setup.
@codhruv8393 жыл бұрын
which radiator is on the bottom? pe or se
@STechV3 жыл бұрын
At the end SE360 (classic) is on the bottom.
@STechV3 жыл бұрын
It was too tight for the classic PE with the vertical GPU holder. But, it's be perfectly fit for the new PE (triple) radiator for sure.
@Countery3 жыл бұрын
Hey for the front panel connector what does Gnd mean
@STechV3 жыл бұрын
Hi, GND means "ground" connection.
@Countery3 жыл бұрын
Where do I put that connector to
@STechV3 жыл бұрын
Front panel shouldn't have a single wire with GND on it. GND pin is available on HD audio (10 pin plug ) connector and ARGB (3 pin plug) connector. I might have mistaken about the question you're asking. So, I'll be pleased if you can share me and image(link), so I can help you better.
@Countery3 жыл бұрын
In my lian li case the front panel connector are gnd hdd positive and negative and pled positive and negative
@synnair3 жыл бұрын
can I use alphacool fittings with ek components and the lian li g1 reservoir/pump?
@STechV3 жыл бұрын
Yeah. you can any fitting which is G1/4 thread size and matches the tube's OD (outer diameter).
@synnair3 жыл бұрын
@@STechV okay thank you so much 😊 Btw I want to do a very similar build like you necause I like it so much:)
@rekt4guud1343 жыл бұрын
First tip, dont get the XL.. so much dead empty space.
@STechV3 жыл бұрын
There are pros and cons in XL of course.
@atimo49593 жыл бұрын
Just a tip as you said you are waiting for a 3000 series GPU that have PCIe 4.0, just check your riser cable is suitable for PCIe 4.0, as i have seen some youtube videos off problems with vertical GPU 4.0 riser cables working and not working, just something that can be easily overlooked. kzbin.info/www/bejne/gajJcnlrjc-LmK8
@STechV3 жыл бұрын
There are PCIe 4.0 riser cables available in the market now. But, It's not mandatory as my motherboard still supports only PCIe 3. So, it doesn't matter even my riser cable supports only PCIe 3.
@alfredg.m3 жыл бұрын
WTF IS HE SAYING?!? I can't understand what india people say
@STechV3 жыл бұрын
Apologies for the bad voice quality. I'm not an Indian btw. I'm in a middle of creating the subtitles for this video for more clarity.
@troublezks3 жыл бұрын
Removing the pump from the distro plate will void the pump seal warranty.
@STechV3 жыл бұрын
I think it's same as for waterblocks. Breaking the seal will void the leak-free guarantee. "The warranty is not rendered void on dis-assembly of the water block, but the customer loses the EK leak-free guarantee which comes with a factory tested water block"