1500 short bed ram cummins swap nv4500

[@getblowd407]

Ya man, glad to see you're back!

[@choppedinc.]

Appreciate the support.

[@chevelleranch7481]

Was wondering where you have been?! Glad to see your still at it and doing cool conversions.

[@choppedinc.]

Thank you. Life's been happening surgery moving across the country kids. Hard to find time but hopefully I can make it more regular again. Thanks for watching

[@johnhaynie5727]

glad to see ya back... this is going to be a sweet build

[@choppedinc.]

Thank you appreciate the support. It's definitely fun to drive. I am thinking it may replace the f350 shorty build I did.

[@johnhaynie5727]

@@choppedinc. yea it looks fun to drive ans something different in power... get rid of the shorty ford hahaha

[@choppedinc.]

I have been thinking about it for sure. Have put plenty of miles on the ford and it does get 20-24 mpg depending on driving conditions.

[@johnhaynie5727]

@@choppedinc. thats not bad mpg from the ford

[@choppedinc.]

It definitely helps when you take a big chunk of weight out of it.

[@bryangomez4856]

"I love the work you've done; I'd like to congratulate you. I have a 2005 Dodge Ram 1500 with a lift kit. Currently, I'm working on a project to swap the engine to a 12-valve Cummins 6BT 5.9. Would you advise me not to make modifications and consider installing a new front axle? Would you recommend modifying the brakes? Would you advise me to at least modify the front shocks?"" You're welcome for responding."

[@choppedinc.]

I did put 2500 springs in the front for the extra weight

[@gkerstetter831]

Been watching your build and definitely caught my attention on the details being shared. I have an 04 with a hemi and should be similar to the v6. I'm curious if u have a custom cable for the injection pump or did u use the oem throttle cable? And the big question is what about 4x4? I don't think you mentioned wether it would clear or need to be modified.

[@choppedinc.]

This was just a 2wd swap. Throttle cable I made custom. Got a go-kart one from Amazon bought 2 and have one as a spare under the seat

[@CPSteveMiller]

Love it. That's awesome

[@choppedinc.]

Thank you appreciate the support. It's definitely a fun truck.

[@CPSteveMiller]

@@choppedinc. I shared it on my community tab. Hopefully gets some views on this. I've been doing this to 3/4 and 1 tons but never a 1500 so to see it done(and done fairly well) it definitely deserves some recognition. Keep up with the videos. Would love to see more of this thing!

[@choppedinc.]

Appreciate that. Definitely some things I will be fixing but it was definitely a rush job 2 weeks to get it swap in and road trip it 1500 miles.

[@choppedinc.]

I watched your 12 valve to 3rd gen vids when I was doing some research. Yours was the best ones I could find and there was not really any for the 12 valve in a 1500 3rd gen swap.

[@CPSteveMiller]

@@choppedinc. I did mine originally in 2 days. Starting Friday night and was on the road to Mississippi Sunday night from pa 😂 Man that was BRUTAL

[@alexgomez951]

This is awesome. I want to do this to my 4th gen 1500

[@choppedinc.]

Definitely a fun swap.

[@hockey3172]

How’d you get all the factory gauges to work along with the original computer I plan to do this exact swap but get a little confused when it comes to stuff like that. Anything will help

[@choppedinc.]

I used all the factory sensors from the v6. The dash was lit up but the worked like normal

[@massiveclockandballs3071]

How’s the front suspension and frame ? I want to 12v swap my early 3rd gen 1500 and I don’t know how well the front end will hold up the heavier engine.

[@choppedinc.]

I left the front the same just put the one tone coils in it with spacers. The one tone coils are thicker then the 1500 but shorter in a second gen not sure about a third gen on tone.

[@kendrickdavis4975]

Wonder if a cab swap would have been easier

[@choppedinc.]

It's not a bad idea but you wouldn't get the better steering and weight loss from the 1500 chassis it drives very nice, better than any secondgen i have driven. You Would have had to cut the frame if you want a short bed and make new ac lines and brake lines and buy a 2500 diff and new front rotors so it wasn't a dually and a new bed. There is probably a list of extra things I would have to do. But each to there own. There is not a wrong way to do it as long as it's made safe. I have 2 other dually trucks and love a fun little run abouts that can get some good mpg.

[@jram16cummins88]

I wish I could send you a picture I got a 2005 ram 1500 with a V6 single cab short bed I wish I could talk to you and get details about what are you did

[@choppedinc.]

Are you wanting to do the swap aswell?

[@jram16cummins88]

I'm definitely interested in it the V6 is getting weak it uses oil

[@choppedinc.]

Ok my next video I will go in to details a bit more and if you have more questions I can answer them

[@josecarreon968]

What cruise control is that? I need one for my 12v also.

[@choppedinc.]

It's actually a electric pedal switch from a 2006 f250. Wired in to the vacuum solenoid for the cruise control. It works pretty good on flat ground. Or it can be used as I high idle in the cold months

[@iansampson2515]

How do you know how to do all that!? Awesome!

[@choppedinc.]

KZbin lol. Years of practice, only way to learn is jump in with some smaller projects and build your confidence.

[@iansampson2515]

@@choppedinc. Hell yeah man. Keep makin videos like that and I'll for sure stick around 👍

[@choppedinc.]

Appreciate the support.

[@rayzelito]

You want to do my truck? Im in texas also.

[@choppedinc.]

Appreciate it but I live in Montana right now

[@skyraiderjet]

Did you keep the ABS? If so how did you keep it functional?

[@choppedinc.]

Yes I kept the abs. The original computer is still there doing all the normal stuff for the truck I just tied in what I needed to so the cummins would run.

[@skyraiderjet]

@@choppedinc. And you use the V6 sensors right? You just adapted them for the Cummins engine? I’m doing a similar project but with an Allis Chalmers 433I so I had the same idea but I wasn’t sure it would work but looks like it will.

[@choppedinc.]

Yes I just used the sensors from the v6. Oil pressure temp and the rpm from the tonering and sensor. The tonering is in the motor so you have to pull it apart or buy a new one. It all ran through the original computer and worked on the dash, just had a check engine light on

[@allfamilyimportanddomestic8508]

How much did you have in the swap I'm interested in doing this

[@choppedinc.]

I bought a whole running parts for $2500 that got me most of the parts. Had to get 3rd gen radiator and ac lines and pump and condenser and 3rd gen intercooler, there was stuff that you maybe able to use from buy a full truck but was easier to buy 3rd gen stuff that fits with out modifications. I think it can be done for $4k or less if you can find a cheap parts truck. If you have to buy everything individually it could get pricey. Some people are asking a fair bit for just and engines.

[@YttuHenry-sl7hp]

How much you charge to swap one?

[@choppedinc.]

Are you wanting to do a nv4500 swap or just a automatic?

[@billymorrow43]

How’s that cruise control work??

[@choppedinc.]

It's wired in to the factory cruise control vacuum thing. There is 4 wires to it, just wired in to it using a ford pedal adjustment switch. There is a diagram on Google that shows you how it's done. It works ok mostly on flat ground but will also work as a high idle on them cold days.

[@billymorrow43]

@@choppedinc. that’s what I’d be interested in! High idle

[@choppedinc.]

DIY Cruise Control High Idle - Electrical - Mopar1973Man.Com LLC mopar1973man.com/cummins/articles.html/12-valve-2nd-generation/31_engine/electrical_34/diy-cruise-control-high-idle-r395/

[@choppedinc.]

This is some info I used

[@hectormartinez129]

You need a helper