16 BIKE HACKS YOU NEED TO KNOW!! 🤯

In today's video I show you 16 seriously helpful bike hacks that you need to know! I feature a mixture of different tips and tricks to make your life easier, yet being faster and more efficient at the same time!
Racing enduro, we need to be efficient in everything we do, so wasting time with your bike when you don't need to is a real waste! Hopefully these tips can help you in the future...and maybe even make you faster on a motorbike...ENJOY!!
let me know in the comments if you like the video!
FIND ME:
Instagram - / bradfreeman12
Facebook - m. bradfreemanrac...
Filmed & Edited by Cairn Bell Photo
Instagram - / cairnbellphoto
Facebook - m. cairnbellphoto...

[@roberto3262]

"A bit of spit" ?? Holy hell! I've seen Wet Willie's given with less spit than that! 🤔🤢

[@bradfreeman7916]

😂😂😂

[@shadowknightmoon130]

You are a spitting cobra!ahahah😂🤣

[@charliepincott4078]

There was a big hole in the back of my bike that was puffing air so I siliconed it up

[@masterjcp1274]

Ha that’s funny I really hope your joking

[@alexpearson6763]

Did u put a bit of spit if not it wasn’t done correctly...

[@charliepincott4078]

Master Jcp only joking 😂

[@TEKKYTWO]

Need a top end rebuild? Silicon and some spit should do the trick 😂😂😂

[@jaredblack3893]

These videos are honestly some of the best, please don't stop. Not many factory riders share these little tricks, thanks Brad.

[@bradfreeman7916]

Glad you liked it! Thanks man 🤟🏼🔥

[@lungocannone6]

Very nice! never stop learning tips! thank you

[@Glock23inyoface]

Saw this video and 2 weeks later my engine started knocking on a trail ride. I got off the bike, started spitting on it furiously, and it worked! Sold the bike a few days later as “almost new” thanks man!!

[@Andrefsr98]

Great vídeo bro!! Awesome bike 😍🔥

[@Corteum]

Awesome tips man 🔥 Appreciate it.

[@americandirtrider7662]

This is probably the best "bike hacks" type video I've seen so far 👌 I'm all about stashing tools and zipties in weird places on the bike.

[@wipperwil]

Thanks for these tips!

[@TheRcscalebuilder]

Love the videos, keep it up!

[@bradfreeman7916]

Thanks!!

[@martinzorro640]

Muy buenas sugerencia Brad Gracias por el video. Saludos desde Argentina 🇦🇷

[@DJsGarage]

For the grips, you can also use spray paint and they slide right in and are pretty solid after they dry

[@ch5zza651]

Nice try 😂😂

[@DJsGarage]

Playground Beefs I am being for real. Lmao. It works.

[@Mr.Stroke0331]

Hairspray 👌🏼

[@weldnasty8942]

No it really works. Just use clear spray paint so u never know its there. Spray it insinde the grip and slide it on. Once it dries its solid.

[@nickmuscolino8724]

cTatham 36 it works tho he wasn’t joking just has the clear one

[@perkodeni7367]

Thank you very much for te foam tip bc my seat does not fit perfecly at the back and watet keps geting in my air box

[@heathmun]

Another grip tip: try using hairspray... spray down the bar and the inside of the grip... it slips on easy and after the alcohol evaporates the remaining adhesives provide a great lock onto the bar.

[@enduroskillstraining]

Great videos bud, keep them coming 👍😎

[@bradfreeman7916]

Thanks man!!

[@pkracing8875]

Hi Brad! I just wanted to ask, how do you fix that foam under the seat and under the battery? Is it sticked with some glue?

[@Libher20]

Hey man great tips cheers from California Also what is your bike? I’m looking forward to getting a ktm 450 or 500 what do you recommend

[@oosteveo315]

Great tips!

[@giorgio676]

Goods tips thx Brad !

[@bradfreeman7916]

Glad you liked it!

[@take5th]

I filled my handlebars with silicon to compensate for the loss of bar-end weights, and it melts in the summer and gets under the left grip making it very difficult to stabilize. Regret putting it in there. Not sure if the vibration is less or if I just got used to it, either.

[@richnewman1913]

Spot on cheers mate 👍

[@bradfreeman7916]

Glad you liked it 🤟🏼

[@the_mad_ratter]

Tip 4 - to speed this up further, put your air gun in the hole you made at the end. It also saves you from twisting grips with patterns or designs on. Also with regards to tip 4, the vast majority of the panels and even some components on my AJP rat bike are held on or in place with lock wire :P Tip 2 - they're cable ties...mine are, wait for it, cable tied to the frame! Using 2 of the cable ties mean you can put the whole pack on the frame, or anywhere else, if you want, and as you use more, you just tighten the one holding them in place.

[@lisimahus]

Brad, where can one get the 8 mm brake pad pin? And I see you use a bolt and nut configuration for the rear brake lever clevis as well.

[@bradfreeman7916]

You can find them easily on the internet 👍🏻

[@darrenbrock5286]

He likes a cable tie or two 🤣🤣 nice

[@theenduropest]

Good tips 👍

[@jimbrown9885]

Why did you remove the clock that came stock to strap a watch on the clutch?

[@lisimahus]

Great tips, much appreciated!

[@bradfreeman7916]

Thanks!

[@lisimahus]

@@bradfreeman7916 is your clutch master cylinder stock? I have the 300rr racing 2020 and the nut and washer that connect the clutch hose are visible. In your bike everything is under that rubber thingy.

[@bradfreeman7916]

Yes the clutch is completely standard...we just use the rubber to stop mud and water getting on to the hose connection 👍🏻

[@lisimahus]

@@bradfreeman7916 Thank you for taking the time answering my silly questions!

[@jamesjackson6292]

What brand seat cover is that? Black bird? I recently put a Chinese cover on and it was a bit short,and I screwed it up,no more Chinese parts for my Japanese bike

[@aurelienbonnet3558]

Wouah it’s very cool. You are the best. Cheers from France 🇫🇷 👌👌

[@bradfreeman7916]

Thanks man!!

[@Johnr37us]

Very informative

[@tettet6295]

Wow~ Thank you👍👍👍

[@bradfreeman7916]

👍🏻👍🏻

[@mattymccolgan9453]

2:30 damm my left fork leg cover always rubbing on the fork cause the brake line is attached to the cover and it pulls it in

[@mitchell9125]

For grips I use regular gas no pre mix and You put it in the grip dump it out and then put the grip on the bike

[@MXUnion]

Great vid!

[@bradfreeman7916]

Thanks!

[@rafischaotic7731]

just one question , who made you characther in the begining of the video?

[@codyjames8424]

Not to be pretentious but you inspired me to get my 2020 Beta 300RR RE. Do you normally run your throttle so far up (rotated back) like that? I struggle with a little bit of arm pump because of wrist mobility issues and I'm always trying to figure something out with the throttle. Any tips? Thank you!

[@bradfreeman7916]

Thanks dude! Yeah you can do a few things...rotate the throttle back a little like mine...try thinner/softer grips...loose fiting gloves...try also having the front brake a little more sharp (less travel on the lever) hope this helps!

[@BassoBuilds]

Brad’s first aid tips... Bit of a scuff, just use some spit. Nasty gash, silicon first then smooth over with some spit

[@bramnuttynck4013]

Nice video!!

[@bradfreeman7916]

Thanks! 💪🏻

[@enkidusool6109]

Der Schokoriegel Tipp! Beste.

[@bradfreeman7916]

Thanks! 🤟🏼

[@GeoffreyThomasGonzales]

these ate great

[@angelo83goku]

Ciao campione perché metti il silicone nella leva del cambio? E perché metti le fascette nei raggi?? 💪🔝

[@mitchf6755]

Whats the wire for

[@Jo4nra71]

Brad, what abut redirecting vent tubes from carb to air box??, I´m surprise works bikes don´t do that to prevent water into the carb....it´d be a great problem during a race, for ex Spanish round 2019 I always do that to every bike I own, surprise factory bikes without that trick

[@bradfreeman7916]

I have done that trick in the past! But haven't had a problem recently with the 2020 Beta...maybe for the future though 👍🏻

[@laga1814]

Thanksss

[@bradfreeman7916]

No problem 🤙🏼

[@diegodegracia9631]

Excelente 🇵🇦

[@GeoffreyThomasGonzales]

need amazon link for spit can’t find it

[@bradfreeman7916]

Keep looking bro

[@inakicallejas619]

Hola Brad,saludos desde Argentina... eres mi ídolo☝🏻✊🏻✊🏻. Puedes poner subtítulos en español??

[@bradfreeman7916]

¡Intentaré!

[@ginaroverhoeven5335]

Hoe have special fibre for around you exhaust that keeps the heat inside the exhaust and away from your tubes and also doesnt warm the kooling water inside the tubes

[@valmetremington5447]

Thanks man. From Canada.

[@PXEETVLACHAINEENDURO]

👌👌👌

[@Voltor63]

Great tips ! Cheers From France ✊🏻🔥

[@bradfreeman7916]

Thanks mate!

[@jean-lucblanc4605]

I'm from France too mate !

[@fs4h]

That mustache is mean bro! 👨🏻‍🦰

[@bradfreeman7916]

Thanks mate 😂

[@rztrzt]

Looks like something the missus left behind...

[@TheDirtbikeRider]

nice video bro

[@eyo-abasibassey983]

Please stop spitting on your bike 💔

[@charlie_2268]

just saying hi in Australia

[@shadow-_-2922]

“Noice” after every hack 😂😂

[@PrinceIsa]

Bro! Give him a break! LMMFAO!!! 😂😂😂🤣🤣🤣

[@ZanSedej]

noice ;)

[@gazmgow622]

I’m currently 20% bike, 30% silicone and 50% cable ties. Works well

[@bradfreeman7916]

Sure does

[@allen4779]

wtf is energy gel???

[@will._bishop1378]

why not wear the watch instead of on the bars

[@troyyardy9440]

If your engine blows up silicone and a bit of spit if you bend your bars silicone and a bit of spit

[@bradfreeman7916]

Original dude

[@troyyardy9440]

@@bradfreeman7916 just a joke mate sorry if your offended keep up the good vids mate

[@dallinwright221]

Up next! How to fix a broken leg wit zip ties, silicone and a bit of spit

[@bradfreeman7916]

Great idea

[@slimchancejw]

Buy a bike made in Italy and all it needs added is some silicone and wire-ties

[@xxs1lentk1ller30]

Bro used 4cents of silicone on 1cent shifter

[@iontakels1622]

noice

[@SMOKYY_DA_BEAR92]

If you put glue on your head then put your helmet on you put a little spit on it to make it look nice that's a really great hack for your helmet and also if you spray paint your goggles black it helps with the Sun make sure you put a thick layer then put some saliva to make it look nice

[@bradfreeman7916]

Hilarious

[@SMOKYY_DA_BEAR92]

@@bradfreeman7916 thank u bro

[@bradfreeman7916]

Was expecting another banger reply from you

[@SMOKYY_DA_BEAR92]

@@bradfreeman7916 sorry bro it's 2:00 a.m. in the morning I'm playing some call of duty in the garage taking a break with the bubbler lol

[@SMOKYY_DA_BEAR92]

If you know what I mean😳

[@encryptor6710]

You forgot to add spit to the cable ties for good measure.

[@Coopdegras]

Best part of that video was the gold bar strapped to the bars.. genius, bad boy biscuits them.

[@bradfreeman7916]

💪🏻😂

[@threecans9137]

BETA POWER !!!

[@bradfreeman7916]

💪🏻💪🏻💪🏻

[@micheleasson7012]

chegey

[@CrashoutDk]

Did he really just spit on his finger

[@bradfreeman7916]

Sure did

[@CrashoutDk]

@@bradfreeman7916 woah

[@CrashoutDk]

@@bradfreeman7916 you replied

[@janeblogs324]

Dafaq is that intro so loud for?

[@bradfreeman7916]

Turn it down then

[@fabianming6491]

@@bradfreeman7916 turd

[@bradfreeman7916]

@@fabianming6491 you’re a turd

[@jayash6108]

80s footballer look

[@bradfreeman7916]

That's the look I was going for 🤙🏼

[@nathanwesener5585]

Bruh the spit like wtf

[@ehsanna7418]

That was the most disturbing spit I ever saw !!!

[@aliasvonte]

Should have left the spit part out 🤮🤮

[@kakudmi]

"I want the spit!" - Charlie Harper

[@bradfreeman7916]

😂😂

[@masonlynch6268]

I got 28 seconds in and had to turn it off .

[@bradfreeman7916]

Sorry it wasn’t up to your standard

[@thatuser101]

just get a KTM. Solves all your issues 😉

[@leyxardon3429]

5:10 wtf man

[@bradfreeman7916]

Banter

[@RanchDelivery]

MAKE YOUR BIKE LOOK LIKE SHIT *TUTORIAL* NOT CLICKBAIT!!!

[@tengo2k7]

Just spit it for good meusure

[@bradfreeman7916]

You got it

[@metaphorik3784]

Bruh.. the whole spit thing is super cringey

[@xwhels]

What is it with you and spit it was unnecessary

[@bradfreeman7916]

Sorry if I offended you

[@Eastsidegeorgiaboy]

Can barely understand you through all of that mumbling.

[@scoremxcom]

I appreciate the Beta/Hitler youth look.

[@danstevens2204]

Ffs