#168

Music by Tokyo Music Walker - East View
INSTA - / kamijuins
E-mail - [e-mail]
PARTS info
1. Deck parts
16ply deck - trampaboards.c...
Wing kit - trampaboards.c...
5mm Carbon Fibre Riser Pad - trampaboards.c...
TRAMPA LOGO Truck Bolt Mounting Panel / Anti-Sink Plate - trampaboards.c...
PCB For motor sensor extension - trampaboards.c...
2. Truck
VERTIGO ATB Mountainboard TRUCK - trampaboards.c...
3. motors
Flipsky Battle hardened 63100 190KV 5500W motor - flipsky.net/co...
4. Gear Drive
NEWBEE 4GS gear drive kit - www.newbee.sto...
5. Wheel parts
155mm tire set - omniesk8.com/e...
130mm PU wheel - omniesk8.com/e...
Superstar hub - trampaboards.c...
Megastar hub - trampaboards.c...
6. ESC / Remote
Ubox V2 ESC - spintend.com/p...
Remote Uni1 V2 - spintend.com/c...
ETC (Amazon or AliExpress... Find it where you can buy it comfortably.)
M4 size Spacer nuts & bolts, 12 AWG silicon wire, Grip tape, rubber mat, silicon mat, interior film sheet, carbon plate, etc.

[@KAMiJUINs]

The first DIY E-board(2023) was completed. I built it focusing on track riding, Also, I made it under the assumption that I could participate in ESK8con. I hope I can participate next year. 올해 첫번째 DIY E-board가 완성되었니다. 트랙 라이딩에 초점을 맞춰 빌드했는데 만족스러운 결과물인것 같습니다. 만약 ESK8con에 참가할수있었다면 이라는 가정하에 만들어봤습니다. 내년에는 꼭 참가해볼수 있으면 좋겠습니다.

[@esk8omg]

Every time you build something, you just blow my mind with the ideas that you come up with great work like always 💪

[@KAMiJUINs]

So glad you think that way :)That's why I make content.~ Thank you so much as always too, bro!!!

[@Esk8antdawg]

Beautiful ❤

[@KAMiJUINs]

Thank you for watching ~ :)

[@jayanderson5823]

absolutely amazing build, I just love the style on this one and how you mixed the wheels and run the wires, this is my most favorite build so far and I cannot wait to see you ride it!

[@KAMiJUINs]

Thank you for saying that and watching :)

[@VaporTrailChannel]

Man…watching you work is mesmerizing! 💯 Love what you do ❤

[@KAMiJUINs]

Thank you for watching too~ :)

[@eBoard3R]

⚡🤙🏼 *My favourite parts are trucks and drive trains!* 🤙🏼⚡ Always interestin to see your choices of the deck deck, truck, wheels. 2023 really is lookin like the year Gear Drive could go more mainstream. I'm still always in awe when I watch you cut and trim these pieces and put them together into enclosures and covers, etc. Stunning how precise and clean your builds are. Another beautiful video bro!! 🤙🏼🤙🏼 Board looks amazin 🤩 especially with the white wheels/urethane.

[@KAMiJUINs]

I always appreciate your detailed comments. Because I feel like I'm being respected for making a board and editing the process into a video. Also, that's why I make content.~ Thank you again for a long time, Bro :)

[@Michaelajacksonfilms]

Thank you

[@KAMiJUINs]

Thank you for watching too :)

[@denismenacci6548]

Your videos, and boards, are pieces of art. Congratulations. Again.

[@KAMiJUINs]

Thank you for saying that and watching :)

[@MrJacobgrange]

awsome!!!

[@KAMiJUINs]

Thank you for watching :)

[@akalia_07]

This is insane. Nice work as always!

[@KAMiJUINs]

Thank you for watching :)

[@Racule]

DIY영상은 볼때마다 느끼는게 역시 난 보는거만 하는게 맞다 ㅋㅋ

[@KAMiJUINs]

그래도 하면할수록 조금씩 나아지고 있는것 같긴합니다 ㅎ 시청감사합니다~

[@ujung5683]

멋진 슈퍼보드 🛹👍 언제나 좋은 영상 감사합니다

[@irvindebruyne6088]

it's amazing and very helpfull Thanks a lot. it Gives me lots of ideas for my first build ! i'm going with the same motors and deck, but stil hesitating between newbee 4gs or omni drive. And i'm trying to go with a bottom enclosure but with the vesc top mount. Would love to see you participate in ESK8con with this monster !! i'll await the video

[@KAMiJUINs]

Thank you for watching :) hope you build well as you planned.~ And I don't think I'll be able to participate this year. I'll make sure I join you next year.

[@guitarwi3rdo]

Man's just made his own dad bods right there

[@worachart111]

Professional built!!

[@KAMiJUINs]

Thank you for saying that, bro~ :)

[@godfriedm9991]

Whenever watching your DIY videos, it is like watching a brain surgery in progress, every details are precisely performed.

[@KAMiJUINs]

Thank you for saying that :) So it takes more time to express the process in a video than to make a board.~

[@godfriedm9991]

@@KAMiJUINs That's why it makes your videos unique from others👍👏

[@denBlessed]

nice, clean and very satisfying build)

[@KAMiJUINs]

Thank you for watching :)

[@xacomparepopping]

bellisimo 💖 ver tus videos me da vida 😁

[@KAMiJUINs]

Gracias por ver~ :)

[@krishnansrinivasan830]

Glad to see your face in the monitor reflection :) Hope you are comfortable with the leg room for the back leg. :) Nice build :)

[@KAMiJUINs]

Thank you for find me in the video~ lol :) And the space on the back foot is not uncomfortable for me at all because it was designed with the calculation already done.~

[@domo4evsky541]

good verry good. but second mini trampa is the best in my opinion. i am already start to build 4wd version after watch your video. P.S. you realy need 3d printer

[@KAMiJUINs]

Thanks~ and I hope you build well as you planned :)

[@justineneo6971]

라이딩 동영상 기대하겠습니다 잘 봤습니다 ㅎㅎ

[@KAMiJUINs]

네~ 시청 감사합니다 :)

[@turbotrainer1]

your amazing ! love all your vids! wanted to get my own diy but went with a prebuilt that has good bones in hopes i can modify into my own diy creation. ive asked around but havnt found any help confirming the parts i need . id love a focbox or storm paired with puck remote to get the most out of my current battery and motor until i upgrade. just seems like it would b so easy to upgrade the vesc remote and maybe bigger motors.

[@KAMiJUINs]

Thank you for watching :) hope you build well as you planned.~

[@Outerspace_cgn]

Love youre Content.

[@KAMiJUINs]

Thank you~ for a long time :)

[@antonypartali]

Hi my friend!! Why you don't make a 20s skateboard...? I think it will be a speed monster! And one more... I read at motors, voltage working from 12-16s... Why?🤔 Why a 63100 motor won't work with more voltage..? Or there are motors with bigger voltage range...? Thank you!! 🙏 You are awesome!!!🤙

[@_Zer0202]

Good work bro 😊👍

[@KAMiJUINs]

Thank you, Bro :)~

[@PeopleDoingStuff]

So how did the urethane hold up? I bought several sets and really enjoyed them at the go-cart track but the moment I ran them on the street they started cracking and loosing chunks. Again, on the track they stuck really well and I loved them.

[@KAMiJUINs]

Mine is still working fine.~ Maybe it's because the grip on the go-cart track is stronger

[@Cinister88]

Is there some kind of advantage over regular paint when you wrap your deck in coloured heat shrink instead?

[@KAMiJUINs]

The reason why I chose wrapping is that it's an easier way. Paintwork requires more technology and workspace than we think. Of course, the paintwork will be high in quality of work. However, I think wrapping is more advantageous for repairing or changing the color.

[@randyvalencia1631]

Great work as always bro! Do you sell your crafts?

[@KAMiJUINs]

Well... According to the Korean customs law, individuals cannot ship goods equipped with large batteries overseas.

[@michaelnoardo3315]

how much costed the fulkl build ? i would bet around 2k $ or more

[@TheDarkstar826]

I'm confuse... My setup is 97mm PU Wheels and I get 28mph with my 170kv motors. You should get more speed than me.

[@KAMiJUINs]

Since it focused more on torque than maximum speed, it set a high gear ratio of 5:1. So even with 130mm diameter wheel and 190KV motor, the maximum speed is slower than yours.

[@TheDarkstar826]

@@KAMiJUINs ok! Now I know what you did. Thanks for the information.

[@zhaothomas456]

I have watched a lot of your videos and like them very much. I want to buy a mountain skateboard recently, do you have any recommendations?

[@KAMiJUINs]

If you mainly ride mountain off-road rides, I recommend Trampaboard or Acedeck NYX z1 among the ones I have ridden. trampaboards.com/electric-mountainboards--c-452.html www.acedeckboards.com/products/nyx-z1?spm=..index.header_1.1&spm_prev=..product_abfc8de4-7d5c-4617-b44a-9105370840e1.header_1.1

[@zhaothomas456]

I'm thinking of choosing one from Acedeck NYX z1 or ecomobl TELUM BA, is there any comparison between these two?

[@greensocket3583]

Is that that a DIY battery pack or a pre made one?, and how are the cells arranged in the pack ?

[@KAMiJUINs]

I took out the battery pack from the other board and used it.

[@gaby8399]

Hi Kami, sorry for being out of contest but the remote of my polestar broke, the assistance doesn't respond and on their site they don't sell the remote, do you know which remote is compatible with the polestar esc? I noticed that the ace deck remote has the same interface, are they compatible?

[@KAMiJUINs]

Hi~ Well, I'm not sure, but I think that's the most likely way.

[@dannyrabbit2381]

What do you do with all these boards you build?

[@KAMiJUINs]

I ride it when I want to ride it and watch it when I want to. In short, the purpose of the collection for self-satisfaction is the biggest.

[@XajuanSmithI]

is that a windows vista pc or windows 7?

[@KAMiJUINs]

It's Vista. I'm a Mac user, but I can't throw away the antique because of some work. XD

[@NilsnVan]

This board has no right to look this good. im jealous of your creativity. Now i need to build something like this haha

[@KAMiJUINs]

Thank you for saying that and watching my video~ :)

[@keeweemo7609]

where is the battery from (purchased)?