Very well chosen topic and explanation. Because of you, we could cut our PCB cost by a third!
@pcbcupidАй бұрын
Glad it was helpful!
@selva81652 Жыл бұрын
Always with great contents 🎉 waiting for more depth videos like routing guidelines, placement and so on
@pcbcupid Жыл бұрын
Thank you, More to come!
@sudhanshuranjan4957 Жыл бұрын
I was waiting for this video from a long time. Could you just make a video in which you could tell us how we can combine two or more than two different pcb. So that i can order single pcb of two different project in same cost and just break them apart and use it in the different project.
@pcbcupid Жыл бұрын
We'll do that in the next video 🙌. But i don't think you can print 2 PCB in a panel at cost of 1. Panel charges will be different, and there might be additional cost as you keep adding more design to the same panel.
@sudhanshuranjan4957 Жыл бұрын
@@pcbcupid so is there any other ways by which i can add two circuit in same board and later we can cut on my own it if we provide enough spacing . As it will save time and money during prototyping the circuit.
@pcbcupid Жыл бұрын
@@sudhanshuranjan4957 if you can make your 2-3 design as a single PCB (without vscore or mouse bite). You can get it done cheaper, but you won't have proper finish and need to use crude way to break the PCB (Saw, CNC or some other means)
@chandrabhaskarsambaldevi Жыл бұрын
Thank you so much for this amazing content, can you also please make videos of Orcad/Allegro PCB designing.
@pcbcupid Жыл бұрын
Glad you like this content! We'll be soon working on either of this software soon altium / orcad or Easy EDA.
@chandrabhaskarsambaldevi Жыл бұрын
@@pcbcupid Eagerly waiting for your videos on Orcad.
@hitendravalheАй бұрын
Is F.Cu layer of Vcc and the B.Cu layer of GND makes the capacitance in the PCB? . . . If i created the F.Cu layer of Vcc fill and the B.Cu layer of GND fill, then the upper side is vcc and the lower side is gnd then there is probability of capacitance is induce, can you say is ok for mini projects and this is not recommendation for frequency and clock related projects? what if i can fill both the layers with vcc? what if i can fill both the layers with gnd?
@pcbcupidАй бұрын
In this case it's already recommended to fill both side with GND. I would never suggest to go with alternative fill on top and bottom if it's a 2 layer board.
@nihatcengizpamuk Жыл бұрын
Thanks for sharing! 😊
@pcbcupid Жыл бұрын
Glad it was helpful!!
@vortexico47888 ай бұрын
I don't get how you get from a leader dimension to the v-score remark so quickly. Did you install some plugin?
@pcbcupid8 ай бұрын
There are no additional plugins; I have just timelapsed the video for better pacing.
@muhammeddikal85515 ай бұрын
Thanks a lot.
@pcbcupid4 ай бұрын
Most welcome!
@srikarbharadwaj8396 Жыл бұрын
It was a good video, but I still didn't get the point why should we do it ourselves rather than leaving that job to the manufacturer.
@pcbcupid Жыл бұрын
Not all Manufacturers give custom options to make rails, mounting points or other features like fiducials. Which are very essential if the PCB are not assembled or tested by them.
@rjordans Жыл бұрын
Getting 5 panels with 6 small pcbs each is often cheaper than getting 30 pcbs. At least when you're working with small boards
@michaelcummings72468 ай бұрын
Another example where you might need to do it yourself is a small board like I'm making that has castellated holes right where all the automated tools want to add the mouse bites 🤬 but need to be routed out there instead with the bites to either side.