18+ Mustang GT | VMP Fuel Rail Kit

[@dond7908]

You rock Jesse!!

[@jimboslice847]

Can I use ID 1050x with your non pd rails? I believe I have the short injectors and stock manifold

[@brentrichards1200]

This is a year old video, so I probably won't get a response, but does the fuel rail kit come with the spacers, or are those separate?

[@VMPPerformanceTV]

Hey Brent! The kit comes with everything needed to install on a factory height set of injectors.

[@cheyenneobregon184]

Would this go well with a fore innovations stage 2 return style fuel system? Don’t know much about fueling but know that’s the fuel kit to get!

[@VMPPerformanceTV]

These rails would work well with any AN fed or stock style feed system.

[@jleal5765]

Question I run stock mani and injector on E85 . Want to go with this system but 47 lb injector. Would I need to retune the car?

[@VMPPerformanceTV]

If you change injectors, you'll need a tune update.

[@maytetorressotelo9670]

0:51 I have a 2016 GT with a 2018 GT intake manifold, will this kit work on my car ? Or would you recommend another kit, I’m a NA build

[@VMPPerformanceTV]

You'll need the following kit: www.vmpperformance.com/VMP-Billet-Fuel-Rail-Kit-for-11-17-5.0L-Coyote-with-tall-injectors_2 That '18+ kit is designed to work with the Gen 3 cars that have direct injection. Your '16 has the inlet located in a different spot.

[@gabecadorette8714]

What is the size of the ports on ends of the rails? are they -8 ORB or a -10??????

[@VMPPerformanceTV]

-8 AN

[@WhiteKnightMoto]

I have a 2017 mustang gt with a GT350 mani, I've tried some other fuel rails but they didn't fit so any suggestions?

[@VMPPerformanceTV]

Hi Joshua, we offer a fuel rail set for the '11-'17 Mustangs running stock or a similar intake such as the '18+, GT350 etc etc. The link is: www.vmpperformance.com/VMP-Billet-Fuel-Rail-Kit-for-11-17-5.0L-Coyote-with-short-injectors_2 To run this intake with stock injectors or anything other than than a "short" injector, you'll need this spacer and hardware kit as well: www.vmpperformance.com/Fuel-rail-bolt-and-spacer-kit-for-11-16-Coyote-with-tall-injectors-60mm

[@medicspc]

These fuel rails don't fit on my 2021 because it hits the coolant connector on the passenger side in front of the fuel rail. Any idea why?

[@VMPPerformanceTV]

Shoot us some photos over to [e-mail] so our support team can give you assistance in sorting this out.

[@medicspc]

​@@VMPPerformanceTV I did and Alex(?) Pretty much let me know you guys don't have a fix for it. I've been told to bend my coolant pipe but that's ridiculous for a product you advertise as fitting properly. I have ordered from your competitor, fore innovations, a low profile 180° fitting that should solve the problem. You guys should really consider a low profile option for all 2018+ cars.

[@KeltonScott]

​@medicspc I know this is late but do you have a link for that fitting I'm having the same issue on my 2020

[@johnnyjayy14]

Wait I Think I Saw This Video Already, Idk Why It’s Out Again Lol

[@reloaded1880]

does VMP supply fuel rail kits for the new edge? 00-04

[@chrism.728]

No, but Lethal Performance does