(1878) Australian Lockton Padlock

[@umarabbouchi3964]

this was my lock i told my local locksmith to add spools and make it hard to pick, looks like im going to have a chat to him tomorrow!!!

[@mrkay1856]

Hey mate, I'm in Brisbane, there a new factory assa abloy keyway going around up here which have a 90° angle both left and right at the very top of the keyway. I've been looking at sending Bill one how do I get his address?

[@arthurcrime]

@@mrkay1856 have a look on the Lock lab website.

[@darrellhenderson5499]

Very interesting lock. Always enjoy watching your videos Bill. I'm learning from every one.

[@GutterClown]

All Associated Security is your local lockie? Damn. Unfortunately, a lot of Australian Locksmiths don't carry security pins (spool, mushrooms, etc) because it's not really the ethos here. We'll use functionally high-security key systems like BiLock, Galaxy, Protec2, or KABA. To increase security on an inline system via spool pins only adds ~10% added time to defeat, when our legislations and security industry requirements have brackets of security resistance in multiples of minutes, not fractional additions. e.g.; Standard locks are exactly that, standard. If the spec calls for high security, they get high security. Anything else is typically an inline restricted key profile. There isn't really a market for lipstick-on-a-pig increased security on inline systems. [ I, however, do carry and will install spool pins because sometimes it's worth that little bit of piece-of-mind ;) ]

[@RuberDuky1]

Found some. Still came back to finish the video.

[@jarrettrodriguez5341]

Always good to finish.

[@RWBHere]

It's a gryphon; a mythical creature. Nicely made lock, Bill, and an asset to anyone's collection. Thanks for the smooth picking and video. 🙂👍

[@Cronin149]

Great video. Thanks for the opportunity to win it.

[@Keeping_IT_Simple]

From their websites.... The Griffin is a mythical creature, part lion and part eagle, which has been known throughout history as a protector and guardian.

[@marvindebot3264]

Beat me to it, I said to myself "that's a Griffin" when he showed it.

[@shannondavis5536]

i laughed and said its a bloody griffin bill . my cats bolted for some reason

[@ro11erbeast]

Bill, I would love a Lockton from down under!

[@matn7743]

G’day Bill. Thanks for all your content over the years. We appreciate all your efforts in making these videos and sharing your knowledge with us all. Enjoy the retirement. God Bless.

[@taylorchapman7015]

Nice lock to add to the collection

[@tedhoward393]

Amazing fun with locks. Old Guy

[@Nathan-gh8tx]

Thanks for the video.

[@iggymac3473]

Great looking lock thanks for the show Bill great stuff

[@knightxl]

I'd certainly love to give it a shot

[@stanleybaggett9981]

Your videos are fun to watch

[@hgec]

I Love this lock 😍🔐 So beautiful

[@mike1381583]

Nice. That's a good lock

[@tcpratt1660]

"...if you don't...find some porn..." ...um, Bill, for people who can come to a climax just by hearing "...the tool that Bosnian Bill and I made...", THIS is porn!

[@jurjenbos228]

Here's some good stuff for lockpickers: LPL's "My 18-Inch Long Johnson (April Fools Video)"

[@ipick4fun27]

You referring to disc detainer pick from Sparrow? I bought one just bc I bought one. Lol. I don’t have a DD lock or even the skill to use it. It looks really beautiful so I bought one. Hahaha.

[@Gamer-vn1uk]

@@ipick4fun27 best way to start is to have the right tools

[@ipick4fun27]

@Gamer that’s why I bought it and skipped the sub-$10 DD picks. I’ll learn to use it some day. Until then, I’ll just keep it bc it has good workmanship.

[@twjohnson1203]

_Dramatic background music_ "Release the Turkdragle! Release the TURKDRAGLE! I SAID RELE---" _tiny voice whispering_ "Uh, excuse me Mr Sorcerer sir, I think it's a, it's a Griffin." "Oh, RELEASE...oh hell I've lost the mood. Let the damn thing out!"

[@stefanox8908]

*Peter Griffin comes in*

[@marvindebot3264]

LOL

[@peterkelley6344]

LOL ROF H

[@bradw0535]

Excellent picking Bill, love the looks of the lock. Reminds me a little of the old Pontiac Screamin' Chicken 😁

[@wfinkenhagen]

I would love a crack at that! Thank for all the time and effort you put in to your content!

[@ssprinklep9107]

I would like to throw my name in the hat for this lock! Great vid as always!

[@frankbiz]

Nice lock..., Bill re-pins...,now it's an awesome lock! Great work Bill. 👍🏻

[@Prophes0r]

"It is guttable. So if you want to see the gutting stick around. If not..." Thanks for making me choke on my coffee Bill...

[@NexumAeternum]

lol, had the same reaction!

[@novo1178]

Great video and I love that you are making this lock harder to pick! Awesome!

[@Toto_Muc]

I would love to pick this modified lock 😍

[@imnotgivingmynametoamachine683]

Thanks for all the videos Bill and enjoy your retirement!

[@madbstard1]

Love the finish on it....looks really nice

[@magwwua]

Thanks for all the videos over the years! Best of luck to you in the future!

[@John-lx8iu]

Looks like a fun little lock

[@nyfirefighter357k6]

The lock might as well go straight into my naughty bucket with that pinning!

[@NeoYAG]

Cool pinning!! Thanks Bill!

[@SolutionUrbaine]

Yes please, send this padlock to me please, pretty please ;) In any ways, thanks Bill for these amazing discoveries.

[@ApprenticeGM]

Happy retirement Bosnian Bill, thanks for sharing your wealth of knowledge on KZbin, and good luck with what's important in life (it ain't here).

[@brianumbrell4049]

Will give me years worth of fun.

[@bradfry5403]

The turkey ,dragon thing is a griffin. Great video Bill ,

[@Primefac]

I am more than happy to throw my name in the hat for an unofficial fourth prize draw of the week! I'm just starting to get the hang of spools and those variations look like fun!

[@jdowis2000]

Beautiful lock and nice upgrade. Well done Bill. Can't wait until I reach the next level in my picking.

[@s1smac360]

I'll just leave this random comment right here. Do what what you please with it. Thanks for the great content as always.

[@brianogram5194]

I would like a crack at those jingle pins, I haven't seen those before. Thanks Bill!

[@funkeyfastdrawmonkey1483]

Definitely been repinned and rekeyed. These padlocks are good bang for buck, even though they have no security drivers. But come pinned to 6 unlike most Lockwood's and ABUS's. I have found that the original drivers are just a tad too short and if it was all zero bitted, the drivers drop below the sheerline. They definitely deserve a worthy security upgrade IMHO

[@tanathos0414]

Oh yeah... Definitely would love to get my hands on that lock.

[@darkdraggon]

Looks like a skill builder, definitely above my current level. 👍

[@oasntet]

This would be a great training lock, too. Anybody who can't quite handle that mix of security pins (me, probably) could re-pin it with different combos (or remove some pins) to train on each type separately.

[@BCM1959]

You get your hands on some cool stuff, thanks for sharing.

[@tunafish3216]

That’s a great lock.

[@michaeljenkins4908]

Very cool lock, love the upgrades you made to it

[@אורימ-ס9ק]

For me it will go directly to the natty bucket . Great video as usual.

[@mrapplecastle]

super cool of you to trick it out before giving it away

[@sir_lagalot784]

I picked up one of these off ebay when I first got into picking. It wasn't that hard to pick but when I pulled it apart I dropped all of the insides (actuator, springs ball bearings etc) and have never been able to re-assemble it.

[@gozzendk]

Thanks for the video 🔒🔑👍

[@tomdickharry673]

Looks epic with that new pin set up i would love a crack at picking that beast

[@jwdataspot]

Very cool pick/gut. Thanks as always!

[@paracentric6188]

I've got a beach chair just for that Lockton. It will be very comfortable out here on the left coast.

[@PBMainiac]

What an amazing man, thank you for uploading so much interesting content. I have just learned of your channel from Lockpciking Lawyer and here's just one guy from South Carolina wishing you the best!

[@deweysellers1452]

Like everyone else I would love to own this lock now that Bill made it special.

[@luckytaquito]

I really like the jingle pin you threw in there.

[@gcmprints2060]

The spool with the little loose rings seems very diabolical!

[@stevef.m.2188]

Thanks Bill

[@joellavinder5387]

I wouldn't mind giving that one a try. Great content, as always!

[@mikeburston9427]

From Locktons web site their product range looks like they buy Assa / Lockwood cleanskin products and then put their brand on them. This is held up by the gutting as all the internals look like 1990's lockwood parts

[@thegreyfuzz]

Bill creating challenge locks now! That slidey spooly pin looks awesome!

[@ConkreteMan]

That’s slick! Definitely improved with the Alien Tech.

[@m-selector]

Wish you all the best and hope we see an update from you further down the line! -

[@lewisunderwood3281]

Awesome tech you put in there. I wouldn't mind giving it a go.

[@lauren295]

Looks like a fun challenge lock, Bill!

[@EngineerMikeF]

Cool repinning

[@almclean4835]

I’m grinning from ear to ear. I’ve no idea why, must be because you beat a lock that you thought would beat you. I’m easily amused🏴󠁧󠁢󠁳󠁣󠁴󠁿😁

[@JohnParkes00]

That's a cool upgrade on the pins

[@jameshall1300]

I would absolutely love to have a chance to pick that lock. Looks like a lot of fun to work through.

[@Penjulum]

I'm pretty sure the logo is an archaic rendition of a griffon. Good job, Bill. :)

[@christopherfox6123]

video 1878...amazing stuff ,keep up the gd work

[@quinnhaubner9151]

Thanks for another great video Bill!

[@richardedwards3098]

wicked lock bill! id love the challenge! and of course id have to pass it along with my own twist!

[@PsYM]

Nice.

[@ChristianAakjærOlesen]

Just started picking locks a few months ago, and I would love to give it a try!

[@xoncention3265]

That’s an Abus padlock rebranded. 83/50 model

[@JasonFrankenstein]

That's for sure some alien tech! I'd love to try it out!

[@lightningsystems]

Another great video and a really nice lock. Wouldn't mind taking an attempt at it. Looks like it would be quite the challenge the way you configured it!

[@weldtec1986]

Thanks for the content. I’d love to take a shot at this lock. Thank you for the opportunity sir

[@rogerbarrett2237]

That's some wicked alien tech, Bill

[@robinhbg]

The creature on the lock is a griffin. A griffin is also the coat of arms of Skåne county in Sweden where I live. 👍

[@JohnnyDee62]

Oh, MAN, that would definitely be a fun challenge lock! Would love to have a crack at it, please. I'll pass it along after. Thank you! 👍🙏😁

[@jamkpa]

That was quick and eaSY TO OPEN.

[@joshuahall433]

Thanks for the content bill

[@tonyfletcher2541]

Awesome to watch you pick. I can relate to your style very well. Keep it up Bill!

[@kkirkphoto9371]

I'd love to take a crack at it. Love your videos.

[@sandsxgg]

I love that line, and a pretty lock

[@dl200010]

That looks like fun! I'd love to take a crack at it.

[@corrik]

Nice improvements, Bill!

[@goadken]

Holy smokes! That's a cool lock!

[@clintcoats7779]

Nice upgrade 🤣🤣

[@wactech]

Looks good, Bill!

[@jeromebarnett7565]

Great video. Looks like a scary lock that you have made.

[@Keidict]

Great video as always Bill, thanks for the content. Would love a chance to pick that lock as my first challenge lock. Never picked anything put together by the community. Those jingle pins must have an interesting feeling.

[@BenButler1]

Good stuff Bill!

[@drvirus12]

That looks like a great lock to pick after the upgrade

[@markb3633]

Thanks for sharing

[@babb-ch6ce]

Great video Bill! Would definitely like to take a crack at that lock! 🔒

[@danielhildebrand6892]

I have the perfect use for this baby. Love to add it to my slowly growing collection

[@kevinlannon5354]

I would love that lock!! Count me in.

[@johnmorgan1629]

The emblem on the lock, is a mix of the beasts a lion and the king of the birds an eagle, it is the Griffin. It has been used a lot as symbol on churches throughout the ages, as a gargoyle carving, it is also used by the ex-GM brand in Europe Vauxhall (GB) as their hood badge.