1938 Kustom Cadillac: Ian Roussel Fabricates The Back To The Back 🤓

1938 Kustom Cadillac: Ian Roussel Fabricates The Back To The Back 🤓
Ian joins the inside of the Cadillac to the outside of the Cadillac. He fabs the seats and takes some curve out of the curve in the decklid.
Ian Roussel comes up with all kinds of ideas in his Full Custom Garage.
We Have MERCH!
roussels-custo...
F YOU ENJOYED THIS CONTENT 👽👽
🛸SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
If you are interested in the window frames or other metal castings feel free to reach out to Rick @ 209-704-2610 Support Artists!
Here are a few videos from Victor's showroom of art/cars that he and Ian collaborated on.
• Exploring his Insane C...
• Full Custom Ian Rousse...
• Full Custom Ian Rousse...
• Ian Roussel SEMA Show ...
Music:
slip.stream/tr...
slip.stream/tr...
slip.stream/tr...
Follow Ian and Jamie on Instagram👽👽
@Full_Custom_Ian
@mrs_roussel_
Our Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an Amazon store for you to shop some of the basics we use at our desert ranch!
www.amazon.com...
👩🏻‍🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻‍🎨Intro and Outro Animation Done By The One and Only
@corvette.mike on Instagram
Build: Ian Roussel
Filmed, Edited and Produced by Jamie Roussel
cadillac full custom garage classiccars california car show custom garage full custom garage ian roussel full custom garage season 1 full custom garage season 2 full custom garage season 3 full custom garage season 4 full custom garage season 5 full custom garage season 6 full custom garage season 7 full custom garage season 8 full custom garage season 9

[@nickdegolier5820]

Ive been watching ian since the beginning on tv and now on utube with jamie, its even better! I get my full custom ian fix more often! Ian u have to be in my honest opinion one of the best car builder/ fabricator ive ever seen ! And jamie does a fantastic job also, love the show even more than the tv series, keep being you ian, ur the best 👌

[@fullcustomIan]

Great to hear!

[@kurtwerner4258]

This

[@dave-uf8ir]

🌶😎

[@1stzjtruck706]

Same here

[@ztag1p]

I’ve been wondering who films the tv show?

[@fredshed3615]

I can tell you guys that those old full custom episodes showing up are a benediction for this channel. Because when you've watched all those episodes you forgot about, you end up on your channel. I've discovered Ian 15 years ago and was happy to watch full custom garage again in 2024 and now overwelmed to stick with you two :)

[@fullcustomIan]

We appreciate that! While we have zero control over how they are distributed on network TV and here on KZbin…all roads lead to Ian and myself and fresh, fun, genuine content with an amazing community of people! Thanks for the comment! 😎😎

[@roywhitman7109]

The personality of this vehicle has changed dramatically! From Wednesday Addams' custom hearse to something from Roger Rabbit's movie in TOON TOWN!! Can't wait to see it finished!! Glad you had a nice vacation, Jamie!❤️

[@markchodroff250]

What can we say but amazing! Your the best !

[@jefftroublefield1539]

I’m so glad you worked on that center of the rear deck, the dip was bugging me. Now it’s really taking shape 🏁😎🏁

[@JeffKopis]

The other day, I referred to that as the buttcrack on the rear deck 🤣.

[@WaxedMerkin]

In the TV show i struggled to see what Victor wanted, After watching this youtube build i can see what he wants and how he thinks. Would love to sit down and have a beer with him

[@tomday7309]

I like the fact that you use railroad rail slices in the build as risers. High quality steel put to another good use!

[@The.Real.Timmii]

I like this channel more each time I watch it

[@r.a.monigold9789]

Jamie - your editing skills are putting real polish to the videos. From personal experience I know the energy, talent and patience required to turn raw footage into an entertaining video. It's a skill that few obtain, but you have it. Thank you for all the thought and effort you invest in each production. I realize Ian will always have the spotlight, but more and more it is you who make him shine. Lucky couple. Thanks to you both for sharing.

[@fullcustomIan]

I appreciate that! 🙏😎♥️

[@DarksideDGM]

I’m diggin the Napoleon Dynamite’esque music! And, your patience is uncanny while you fabricate…a good life lesson for those of us that live in a world of “I want it now”.

[@raynavarra]

Outstanding! The answer to your question, is this ? Is this too boring? The answer is a definite NO. it is very enjoyable to watch a master of metal at work. Problem solving on the fly is definitely your thing. It’s looking great so far. Looking forward to the next video where you finish off that inner cockpit area.

[@Mopar46]

Never boring, Ian. Watching and learning.

[@garysacry5969]

Listening to the soundtrack, the only word I can think of is “frivolous”! I’m enjoying the feeling very much! Thanks Jamie!!

[@fullcustomIan]

Wonderful!

[@charleshewitt3026]

Ian I'd love to see your version of a Philippine jeepney, they build them here from scratch wearing a pair of shorts and barefoot or open toed slippers no welding mask some wear sunglasses, but you wouldn't believe the talent here, but I think you're the best sir! Watching from Cebu

[@65cj55]

They're amazing, very decorative .

[@TX-biker]

Welcome back Jamie!! you sound bouncy and joyful so it must have been a great trip

[@KayakCampingOffGrid]

Wow... Today's episode was cathartic! The curves and shapes of the rear deck lid suddenly took on a unified look! Fascinating how you bash metal into submission. More like slap and tickle the steel! 😅 Great lines emerging from the build now... ❤

[@fullcustomIan]

Glad you enjoyed it!

[@KayakCampingOffGrid]

@@fullcustomIan just so fun to watch and learn. You really are a great teacher as well as practitioner! 😊😊

[@markmartin5248]

Great Lady behind the camera. Shes got it all, and then some.

[@songsmithy07]

Jamie, you have outdone yourself with today's fabulous music selection.

[@grantberecry]

Looking good now, i like that you removed the center dip, and looking forward to seeing how you blend the metal where the door meets the curve.

[@elsdp-4560]

Thank you for sharing. Happy Friday and weekend to both of you.🛸👽👍

[@kensteffes6712]

This vehicle will be collectible and very valuable one day. There should be a show that displays these creations in a public setting.

[@MichaelMaxim-ft5sv]

Santa Maria car show this summer

[@MichaelMaxim-ft5sv]

Santa Maria car show this summer

[@soundsolutions]

I found it very interesting how you lifted that "dip" on the rear boot section. Nice to see the hammers being used proficiently.

[@thomascalise5640]

Thanks ! was watching the news and was about to give the tv a lead injection ! but stumbled on to a FULL CUSTOM GARAGE Marathon on Motor Trend . After a couple of episodes and a fatty all good ! Thanks for saving my TV Doc 🤣👍✌😎

[@fullcustomIan]

We are glad you are here and that your TV is still intact! 😂

[@martinlicht1969]

So good to see such masterful artistry. ❤

[@davidohler5611]

I feel for you wrestling that trunk portion Brutha - it sure has a mind of its own. Sure like the direction you’re headed though getting rid of the kinda back side cheek look. Always an experience watching you go through your process - Big thanks to you and Jamie for continuing to take us along for the ride.

[@chadmote3466]

That view outside your shop definitely doesn't suck! I used to live in Arizona and I sure miss the desert sometimes.

[@inmyopinion6836]

WOW! The shop! You DID miss her ! ! ! ! THAT, is exactly what I do, and I bet a lot of other guys. I find the best thing for a wonky heart, is mindless motion. Well done brother!

[@bruceharkness4497]

Thanks again, neat project for sure. I can’t imagine a more head turning convertible being built.

[@quijote2003]

Hey guys, I've been big fan of Ian since ever... really love his work and now I really enjoy watching this new , more personal, and family close show, I just have a question... I saw those beautiful cars you took to Sema 2023, where can we see the construction of those 2 beautiful pieces of art? I can't find it anywhere, it seems like you were working on them at the same time you were filming for the KZbin channel, but, we're hose constructions filmed? Where can we find the ? Thanks a lot in advance!

[@fullcustomIan]

Season 9 of Full Custom Garage

[@DILLIGAF...F.T.W.]

I think it's great ... Having you're wife camera for you... My wife and I did everything together.. 7 yrs... Since she passed.. still mourning.. but it's so nice to see a couple working together .. it builds Strength in your bond.

[@jchayes7325]

Add a feeling you were going to figure it out it looks fantastic keep up the good work have a good one and God bless to the both of you

[@timf6864]

I love watching the progress of all of the builds. I hope we get to see the final product after Victor completes it.

[@tattoowho]

I noticed Max had some episodes I hadn't seen. I was watching them until I discovered this channel. I've watched all the Zephyr playlist, now all the Cadillac ones. Plus a lot of others as well. Thank you for doing the channel. It's great.

[@fullcustomIan]

Thank you for catching up! Welcome to the Full Custom Community! More content this week!

[@butchboucher3593]

I love that you have 1962 Impala hubcaps on the wall!

[@zaccat693]

Watching from Australia. I love your skills Ian, especially how you create multiple curves that work out great, very hard to do. Your TV show was on over here very spasmodic and later in the evening. You both have great characters and personalities. Ian

[@davehansonsr.4587]

This man is so smart man if i had just a small part of his knowhow l would be happy. It is the best car building show on KZbin

[@eziotaddeo1726]

Wow! So much laughter, welcome back Jaimee, Ian brilliant ep, this build is awesome, your blow by blow banter, gr8, very interesting, cheers

[@jamesrankin9833]

Glad you’re back Jamie! We didn’t even get, the chick on a stick, 😂 we got a clean garage instead, works for me! Loving how you tied that deck up!👌🏻 Good stuff!!

[@johnhart125]

Again I learned a new trick, youre videos are entertaining but also give me schooling on my projects, been playing with cars 60 yrs and uts refreshing to see you make my mistakes and then show me different ways to remedy them, along with a bit of humor! Need an apprentice? Lol

[@tommoraga8318]

I continuously learn tricks of the trade. Thanks 😊

[@bigunone]

AS an electrician all the time you were doing your bends I was laughing because I knew what was going to happen! 🤣 If you are ever in a commercial job site and see a short piece of conduit between two 90* you can bet the same thing happened

[@David-mz3or]

Absolutely perfect 🇺🇸👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻✅✅✅✅✅⭐️⭐️⭐️⭐️⭐️🇺🇸

[@JohannFolscher]

Absolutely love your background organ music!!

[@nbc902]

Perfect volume on the music track

[@farfromdonemotors6796]

Never seen anybody use that type of leverage technique. I'm always learning so much from watching you

[@howquick]

As an industrial electrician who has bent a LOT of conduit in the past 40 years in the trade...I'm surprised you couldn't hear me yelling at the screen all the way from Australia 🇦🇺 "YOURE BENDING THE WRONG SIDE OF THE LINE" 🤣🤣. Shit happens man. Love your work. 👍

[@dave-uf8ir]

Ausum guys yay victor visit excellent cheers 🥂 😊

[@GaryMarquardt-ir2mv]

I like watching his show because of all his creative ideas he's very very talented I would love to meet the man thank you Mr Russell

[@robertbenn-yj3ge]

I'm from Kankakee! Left in 1983. I live in Aurora now.

[@fullcustomIan]

Hello!

[@ericmcginnis9413]

One cool car and with all the custom work I cant wait to see it in all its glory once finished

[@fullcustomIan]

It is going to be a beauty!

[@taurota1554]

Thanks for sharing and taking us along

[@greggrusnak6094]

I just Like Ian, its simple to the point.. Thanks Jamie

[@fullcustomIan]

🙏😎

[@BrianRoddaDesigner]

Your camera is amazing how it picks up lots of image from the bright outdoors! That’s usually blown out with the old camera.

[@ralphy101112]

Another great visit. Great videography and music, Jamie. Working through an oops, Ian. For a minute there I thought you were going to go for the split seats, a la an early Vette. The trunk "cleavage" is almost gone, you'll get it. About a minute from the end you can see how the trunk/ fender "almost" flow together. Nicely done.

[@AngusCaleb]

wow that car is looking outlandishly smooth and low. you and victor make a great team. put enough power in it so you can get is sideways...this i will be looking forward to...

[@laurensmith1828]

Pretty cool trick using that bar welded to it for leverage, never seen anything like that! Thanks for sharing the secrets!

[@shotsrodder]

Little by little 👨🏻‍🎨 shop looks good 😎👍

[@gr5535]

The Mood Music is as Amusing as it is Amazing 👍🥳🏁

[@fullcustomIan]

Definitely a vibe 😎

[@alphaandroidw]

Amazing work guys. So inspiring. So positive.

[@55Education]

Brilliant work and just great to see you are a team

[@RPrice_OG]

OMG! A clean shop.

[@philipgoldenstein8247]

Hello from Bradley, IL. Long time fan. ❤

[@fullcustomIan]

Hi there!! ~ Jamie

[@larryschmidt3594]

As a retired electrician I was going just measure and use your bender to add the rise. Quick easy and a nice even bend with no kink.

[@crazywickedcustoms7272]

And love Jamie questions and filming , she make it fun❤

[@jimwhittemore1610]

Excellent inspirational work, better overkill than under. Background music adds a cool vibe to the video, once again thanks for the content.

[@AceMcgee-q9f]

Sir you have the skill of a Jedi master... Would love to see some. FULL CUSTOM stickers / t-shirt. Peace Love Ace out

[@fullcustomIan]

roussels-custom-fabrication.myshopify.com/ Use coupon code ThankYou! For 20% off your order today

[@HeureEux]

Congratz from France You’re a « F world » artist ! You inspire people

[@johnfitzhugh2871]

We sure love y’all here, but truth be told we miss you on TV aswell. We will watch y’all wherever y’all are.

[@SteveYankovich]

This car is going to be quite a creation, a work of art

[@johnconnick3796]

Thank you for the upload 👍

[@fullcustomIan]

You are welcome!

[@johnconnick3796]

Never miss an episode, great content 👌

[@user-fr8ub4ln7s]

Love your work keep up the content the pair of you happy weekend.......uk....,.......

[@fullcustomIan]

Thank you! You too!

[@busterweehunk6044]

Got my T-shirt today! Great way to start the weekend!

[@fullcustomIan]

Awesome!!! Thanks for the support! Have a wonderful weekend!

[@nickbellinger1047]

i didn't think you would get it as good as that, good effort, lovin the music jamie

[@capt.spaulding5858]

You guys ROCK ! Love the sound tracks !

[@tomday7309]

Ian, I love your style. I do the same thing with my projects when I need to form stuff. I look around the shop and see what I can use for a bending/shaping form. No need for expensive equipment all the time.

[@steffancowan6295]

I loved the audio on this one. The music fit right in.

[@edcianfarra7890]

A mild curve. Keep up the great work, I really enjoy the show.

[@JonathanAdams-z8r]

DUDE! The shop looks great! 😀👍👍

[@ellertorresiii1081]

Thanks for the video guys. Keep them coming because we’re addicted to your vlogs. Hi Jamie! ❤👍👏🙏

[@eikodunn]

So much progress in one episode. 👍🏾👍🏾👍🏾👍🏾👍🏾

[@jenningsMarshall-cz5qx]

Studebaker K 30 pick up truck back fenders very similar to your Cadillac that you’re building. Love the show Jennings Marshall.

[@gardena-osonho7762]

Fala familia Este projeto esta transformando a cada dia, vai ficar muito lindo este projeto. Forte Abraço.

[@michaelgilchrist6182]

Nice trick with the tack-welded lever! Would using an engine hoist to pull prevent the lever/block from deforming the surface?

[@persioorsolon702]

I'm from Brazil and i love your job!!1

[@AntiqueAutoSmith]

Hello and Happy Friday Roussel's!! Excellent and inspiring as ever!!

[@65cj55]

Ian come walking in with that lumber on his shoulder like Arnold in Commando 😆💪

[@fullcustomIan]

😂😂😂😂 he did … he was happy he didn’t burn it

[@albertdehn8381]

Thanks for sharing

[@MalcolmNorthfield]

Fantastic work

[@PNWRed71RallyNova]

Happy Friday!! Looking out the garage door at the VW, it looks like a character from the Disney Cars movie! The background too! Back to the Caddy Hack! Yes!

[@DavidSmith-ve5kj]

Love your choice of music, definitely different.

[@BETTERTOMARROW]

Morris and Coal City ..

[@terryosz8458]

Another great video thanks for sharing stay safe out there

[@raghudas2781]

looking good

[@StanSzalkowski]

I really like this concept of real reality programming. It seems all the car building shows have fallen into the same formula. The customer wants a $50k build for $40k then he’s told it will take 3 months but tells the builder he needs it in 2 weeks. Then they start the build only to find it’s a disaster. But in the end they get it done while driving it to be delivered.😵‍💫

[@fullcustomIan]

Exactly… that formula is old. Genuine story tell of Kustoms is where it is at 😎😎

[@numbcuts5936]

Loving this build! I’m gonna want it!😂

[@tomtruesdale6901]

Great video. Car is starting to come together. Those shirts would be killer if you could print them with glow in the dark lime green ink.

[@markharris3785]

Always exciting to watch you building

[@SteveHorton-u3i]

Awesome work today! Interested to see how Victor enhances. I think I am feeling like some VW action. Keep it up we love you two❤

[@barrysprague8889]

Can I solve a problem and add some awesome design to the Caddie? The car needs SUICIDE doors hinged in the rear. The door would open far enough ahead of the rear fender so thats not a deal breaker. Not only would it be easier for access in and out, it would add another very cool design element to the car. PLUS-----you could swoop the front fender back and down merging the swoop into a very cool running board that extends back to the rear fender. Whats even MORE COOL is that the rear section of the swoop would be attached to the door itself. The swoop would have a split in it at the front edge line of the door thereby allowing the Suicide Door to open fully.So when you open the Suicide door the tail end of the swoop is on the door. Then when you close the door, it looks like the front fender is just one long cool swoop down. Please please pretty please?? Think about it, just saying.....

[@arthursilva6140]

Another great episode Ian.looks like the Cadillac is shaping up. 👍

[@glenbaker4024]

I don’t know if it’s a copyright infringement but a T-Shirt with “I Want To Believe It’s Going To Work” with an Alien logo between the first and last three words would be cool. Another idea would be a Square box (possibly a car shaped box) on one side and Ians’ portrait beside it (Ian Out of the box)👍🛸🇦🇺