1948 John Deere B Part 18 Restoration - Painting Round 1

[@Kalkaekie]

Outstanding video series for this JD B !! Really good job !!

[@Kalkaekie]

Enjoyed the video !!

[@albertomenchaca2385]

Good job man..

[@jd60palouse95]

I have a 1947 GM (early styled G) and the shift lever won't go into the 5-6 slot. All other gears work fine. I need to take the transmission cover off to see what the issue is. Your video will be helpful.

[@DanielFarmChannel]

Hopefully you checked out my latest video of taking apart my G transmission. If you have any questions don't hesitate to reach out.

[@harleywinters2977]

I have a question with the ignition

[@everetthord4918]

1.4 noozle for jd paint but what size noozle for primer

[@DanielFarmChannel]

I don't think I used a different nozzle. Sorry, but I can't remember for sure.

[@everetthord4918]

Ok, thank you

[@huntingandstuff9489]

The early bs has the tube from the governor to the intake too

[@harleywinters2977]

I have a question with ignition if I could get some help I have no spark

[@DanielFarmChannel]

Magneto or distributor? Just work your way back. If no spark, check spark plug, then check different wires, and finally the mag itself. Sometimes the wires get cut and ground out in the tubing around the engine block. If you have nothing from the mag, then take the cap off and clean the points. Sometimes the mag needs completely rebuilt. Hopefully that helps.