1958 -1964 IMPALA BRAKE LINES / DIY / CUSTOM BRAKE LINE / LOWRIDER / CLASSIC CAR / SAE BRAKE LINE

Welcome back! In this video we hand bend some brake lines for the rolling chassis for the 1960 impala! I use generic, basic tubing bought on eBay, along with a 16 inch rear hose also from CPP sold on ebay. This process was pretty basic and should work for most 58-64 impala frames, along with other years and models. Thanks for watching!!
#impala #chevrolet #classiccars #restomod #lowrider #bodywork #2kprimer
Follow me on Instagram: @lonestar_lows
Follow me on KZbin: / lonestarlows
Email for business inquiries: [e-mail]

[@rickg-funk3144]

Good work

[@jayroller7054]

Looking great! ✌😎

[@Classicupholstery409]

Can u post link for the brake line by the roll n the clamps thanks

[@lonestarlows]

I sent you a msg on IG big dog

[@robsoultrain1061]

💪🏾💪🏾💯🔥

[@edgrabski1390]

It was 34 here yesterday morning.................... They do make a softer brake line which helps if you need a bigger size. The lines came out very nice. You do need the oil pump gasket, your pressure would not be very good. It's to bad most of the work on the frame gets cover up. Small crew for this job. Been busy the past 2 weeks, update you later.

[@lonestarlows]

Yes it's a shame the entire frame gets covered up

[@JamesSmith-oe1ot]

Good call on gasket MR. L. LS if I remember right had an o ring with a clamp. Similar situation this morning just getting ready to drop my 6L80 pan to get at my TCM to get it flashed. Fun. I'm gonna use flared brake line unions down near frame and make separate lines up to proportioning valve.

[@lonestarlows]

😎

[@armandonava6575]

Are you going sell the 60 rag, I can see it’s going to be a beautiful car.

[@lonestarlows]

Thank you. I dont plan on it, unless it's someone comes with mucho dinero

[@thekingmtmt3873]

Hey do you know where i can get repop side moldings for a 4 door 63 impala? Ive been googling and coming up with nothing. Any advise would be greatly appreciated.

[@lonestarlows]

I'm not sure those are made?

[@thekingmtmt3873]

@@lonestarlows it's a place called Restoration World in Ohio who had it but but they are on backorder now. I was seeing what else was out there

[@gemcitywelding7234]

Heard about them OG arm’s coming! Do you mind sharing a link to the clamps

[@lonestarlows]

www.ebay.com/itm/115620594580?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2D7v5LLPSQi&sssrc=4429486&ssuid=5P5exboQSoi&var=&widget_ver=artemis&media=COPY Yessir. I'll do a video. Of why I'm replacing uppers.

[@juliosandoval8244]

Dam thats a clean roller love 60s impala

[@straightpipeproductions3726]

Them Roadstars….yummy…

[@lonestarlows]

🥰😒🥰🥰🥰

[@49BigPoppa]

Call fuel pressure regulator is going to be at the fuel rail on the engine so you’ll have a supply line up and then you’ll have a return line back to the tank

[@lonestarlows]

Thanks

[@fleetwood9142]

Great 👍 super clean..

[@simoncabron4915]

Clean work. You should replay the Ranger game for better results. lol

[@lonestarlows]

Oh its on tomorrow night buddy....on. like donkey Kong

[@Anthony-to7cp]

​@@lonestarlowsPuerto Rico?

[@lonestarlows]

@Anthony-to7cp no

[@allan-mw7op]

Awesome work ! very clean...

[@lonestarlows]

Thanks

[@Harlo86]

What's the name of those knock offs? 👍🏾

[@lonestarlows]

Roadstar, by roadster wire wheels. Long out of business. Probably 25yrs

[@Harlo86]

@@lonestarlows thanks I remember those as a kid. Those spinners are bad ass. Does Dayton have a similar style with the grooves?

[@lonestarlows]

@Harlo86 they used to. They don't anymore. There's still some nos sets floating around but not many. They call them fluted

[@Harlo86]

@@lonestarlows thanks

[@phildoleebowitz5335]

Why do you keep saying that you don’t think the oil pickup tube needed that gasket? Do you know something the engineers didn’t? Do you really want to get all the way to running the motor and have issues all over a 5$ gasket?

[@lonestarlows]

I could send you the picture I took of the pickup tube and oil pan that I took if you'd like. When you see the picture you will wonder is there a need of a gasket...

[@lonestarlows]

And yes sometimes I do feel I know more than gm engineers lol

[@phildoleebowitz5335]

@@lonestarlows no I don’t need a pic, did a 5.3 and now doing a full tear down ls1 for my impala. Some things on can look to be unessential on these motors but when it comes to the time and money spent to build them cheapin out on your oil system isn’t the place to do it. Granted, the pick up tube designs could be better as far as the mounting is concerned. I back mine up with a bracket from ict to mount two bolts into holding it down so at least if pressure issues do arise you could easily make a confident assumption its not your pick up tube. As you have seen nobody wants to rip the motor back out to check out the gasket or o ring. No hate, love your channel and your builds are stellar

[@lonestarlows]

@phildoleebowitz5335 thanks man. Yeah. I really dreaded pulling the engine again over a 5 dollar gasket, but I can sleep better now. There's no way to pull this drive train out without damaging something once the car is together. Would have to tear the whole front clip down