1960's Table Saw Restoration (More dust collection and extras) (Wadkin Bursgreen AGS 10) Part Three.

[@curlylambeau1178]

And the Norm sound bite at the end! Outstanding…thx!

[@HewAndAwe]

Thank fuck I didnt use the "Walls-Woof! Sausages" sound bite 😂 Cheers Curly, hope youre well man!!!

[@niels5145]

hi there! let me start by saying thank you for your to the point, no Bullshit approach. I love watching you work without sponsors or other product placements. It is a joy like this. And i learn a lot from watching you problem solve. thanks again!

[@HewAndAwe]

Thank you Niels, thank you for the compliment! 🍻🍻🍻

Hello my friend, We are in the third part of the restoration of the legendary table saw. It will be more functional with this renovation. The suction power of this dust collection system is great. Perfect for the knife and miter setup you use. Nice extras. good job. congratulations. Thank you for sharing the details. See you later. I wish you have a nice weekend.

[@HewAndAwe]

Thank you buddy, hope you have a nice weekend!

[@VORONM]

My sincere congratulations, Bob! A beautiful tool. You did it!

[@HewAndAwe]

Thank you mate, appreciate the compliment! Nice of you to say! 🖖

[@tofmcwilliams887]

Yes!!! Way to finish strong

[@tofmcwilliams887]

Thanks for the modified insert demo. I'd seen the video you quoted as your inspiration, but was unsure. You laid that business to rest. Again-your irreverent sense of humor is such a breath of 'fresh' air. Nice to feel like I'm in the shop--Not in a classroom being monitored by the F'n PC (politically correct) pukes.

[@HewAndAwe]

Oh-boy, Ive been away, and loads of comments to go through the usual comments though - but yours mate, finally someone gets it! Really appreciate reading this mate, I was really thinking why do I bother with youtube! Cheers Tof, hope you have a wicked weekend!!!! 🍺🍺🍺

[@BischBaschBosch]

Nicely done chap. Well worth the effort that. Restored a couple bits of 60's kit now. Effin' and Jeffin' most the way through it hehe. Been look at old table saws recently. Slidy ones. We'll see..

[@HewAndAwe]

Cheers bud, I wouldn’t say no to a wadkin pillar drill for sure, was enjoyable and a great tool at the end of it.

[@andrewhills6535]

Nice job , rebuilt a few of these 🙋🏼‍♂️🏴󠁧󠁢󠁷󠁬󠁳󠁿👍🏻

[@HewAndAwe]

Curious what grease did you use on the rise and fall?

[@andrewhills6535]

@@HewAndAwe just spray with motorcycle chain grease

[@tonyworkswood]

Awesome job. You've done it better than proud. It's outstanding. Tony

[@HewAndAwe]

Thank you Tony, Ive answered this before, sorry if you get two replies - wish TY would get their shit together!!!

[@tonyworkswood]

@@HewAndAwe Hi Ben. What's TY lol?

[@SujMenon]

Great result with that dust extraction, Ben. I was ROTFLMAO with the bg music and running commentary, haha 😄

[@HewAndAwe]

Hahaha cheers buddy, hope you're well mate!!! 🖖

[@paultay23]

Nice one Ben...great job and a lovely saw with great dust collection.. What more could you want. Cheers Paul

[@HewAndAwe]

Thank you Paul. I really fucking love it!!!! What a difference its made, for a few quid more than a site saw...

[@micheltheflambonian]

WouW, Respekt, brother 👍🍻

[@HewAndAwe]

Cheers dude, thanks for the compliment! 🍻🍻🍻

[@gaetanlaufenbuchler5692]

Perfectionniste. 👏👏👏👏. Elle est vraiment belle ta machine. 👍

[@gottabighit1]

Freakin genius. Should have a million views soon enough.

[@HewAndAwe]

Hahah I should be so lucky lol Thanks for the complement!!!

[@spencerjuk]

Bloody marvellous

[@HewAndAwe]

Thank you Spencer mate!!! 🖖

[@curlylambeau1178]

Dude, finally! Thx as always!

[@yankapoodle]

Coolest saw I've ever seen. fantastic videos as well, thanks

[@HewAndAwe]

Thank you Yankapoodle, much appreciate the compliment mate! Hope you are well and good!!! 🍺🍺🍺

[@ChrisFranklyn]

Very suitable music for the sausage action at the end!

[@HewAndAwe]

Hey Chris, nice to hear from ya! Been missing your sense of humour, do you think you'll return to the tube?

[@ChrisFranklyn]

@@HewAndAwe I mate, that's lovely of you to say. Yeah, I'll be back. I've just been concentrating my efforts on getting my skills up and a couple of guitars good enough to sell. Which is terrifying but a lot easier and quicker if I'm not worrying about filming it. But once that's out the way I'll be back to my usual nonsense :)

[@Webjaybird]

Fantastic job! And it'll cut a hot dog without shutting off! 😂

[@HewAndAwe]

Cheers Jay! I'm glade that point wasn't missed 😂😂😂 Hope youre well mate!

[@tylerbirchfield3741]

Great job man!

[@HewAndAwe]

Thank you Raymond, nice of you to say man!!! 🍺🍺🍺

[@forbol]

LOL, That was awesome!

[@HewAndAwe]

Thank you Daniel mate, hope you're well and good man!!! 🍺🍺🍺

[@BasiliskFilm]

Great video and detail. Apologies if you have answered this before, if you are prepared to disclose, what sort of motor did you get for this? Brand/supplier/cost/spec? There are a lot of splendid 3 phase tools out there, and I doubt I would get 3 phase installed in my workshop, so I'm considering getting a 16A circuit installed, which I imagine is a minimum for running heavy duty machines like these.

[@HewAndAwe]

It’s more to do with the right size pulley and that it fits the bolt pattern then anything, power is up to you I went with a 3hp and am happy with that as I never put a 12” blade in and it’s hard to stall the motor. Yeah you will need a 16A supply sometimes it’ll work on a normal fuse but mostly not. I’ve been asked this loads and I can’t find the receipt. Think the motor was close to 200 quid, you’ve gotta get the the pulleys right and the shape of the v bands oh and length.

[@bufunga]

Genius

[@HewAndAwe]

Thank you Bufunga! Hope you're well and good!!! 🖖

[@jayt838]

Watching this with speaker up, Wife - "What the hell are you watching ! ? Better not be porn !! " LOL great videos

[@HewAndAwe]

I get that a lot 😂 …”it’s 70’s funk” 😇

[@johncooke4643]

Thanks for the video, how accurate would you say the saw is?

[@HewAndAwe]

Mine, 0.06mm that’s inside my tolerance 😁

[@johncooke4643]

@@HewAndAwe I'll take that as accurate with a capital A...super...thanks

[@HewAndAwe]

@@johncooke4643 it’s funny I hadn’t checked, well I had but not to that degree so when I saw (pun intended) your question I got the veneer callipers out set the saw to 50mm ripped away and that gave me a nice big smile 😊 I try to work between 0.25mm and 0.00mm tolerance.

[@johncooke4643]

@@HewAndAwe I'm buying a refurbished one, I'll check the accuracy when I get it. They are certainly solid machines...I like the grip at both ends of the fence.

[@HewAndAwe]

@@johncooke4643 I wondered if there was a market for refurbed wadkin, my bro fancies buying some and me do them to sell on, but I’m not sure. Funny you mention the fence, I’ve heard a lot of peeps complain about the AGS fence, mines bang on square even though the rails aren’t parallel, runs nice and smooth too, can push it with one finger. Do you mind me asking what model and what you’re paying for one? You know there’s a Facebook group for wadkin tools?

[@oldshield]

what was your soundtrack on this vid?

[@HewAndAwe]

Next time you see a rainbow run towards the end of it. If you make it in time you'll be met by a leprechaun guarding a pot of gold. Answer one of his riddles and he will give you enough gold to buy the soundtrack. That's the easy bit, next you have to find the soundtrack .. I've heard it's guarded by a dragon in a cave of enchanted talking monkeys across a field of unicorns and through a wood full or fairies and goblins. Good luck! ...In short its one sound track I cant talk about...

[@Monedge]

So my wife thought I was watching porn, no honey, just a woodworking video on KZbin. Thanks for getting me in trouble 😅

[@Sly_Wolf_1]

Although I'm suffering from TSE (table saw envy) seeing your table saw😍 has deleted my dependence on viagra. 😳

[@HewAndAwe]

LMFAO!!! I know what you mean, every edit I make and the saw is in there I’m like god I love that saw!!!

[@_Us.A]

🎸🎶😉😄👏👏👏👍

[@HewAndAwe]

🍺🍺🖖🤗🖖🍺🍺 Thsank you! 👐

[@covert0overt_810]

Porno music.. check.... English accent... check.. Amazing innuendos.... check.. Yep.. its a Hew and Awe video lol

[@HewAndAwe]

LMFAO!!!!!!!!!!! Oh-man that made me laugh!!! Thanks for that, I had my head in my hands thinking (yove over done it this time dickehead!) Hope you're well man!!!

[@karlpopewoodcraft]

Stunning. Ps I need this sound track in my life, sexy 😍

[@HewAndAwe]

Thanks mate! I kinda can't say,,, its funk, porn music I like that funky shit - one day YT will be on my back though mate... the price of making a vid that just works...

[@karlpopewoodcraft]

@@HewAndAwe Sod em there great videos mate.

[@idowuoyewole7720]

How can I make direct contact with you. I have a few machines to restore

[@HewAndAwe]

If you search for hewandawe on facebook and message me there, I dont fancy publicly giving out that kinda info in comment here bud.

[@77barree]

I came for the porn music best woodworking videos on the tube.

[@HewAndAwe]

Im getting well stuck with copyright issues these days... I wish I could find some none copyright 70's funk with that porn vibe and not get in trouble with youtube - so frustrating as a creator having my hands tied...

[@alexwolf9778]

I get that you were trying to be funny with the music but my wife came in the room and was like "What in the heck are you watching"...

[@HewAndAwe]

And you replied “Woodworking’. A type of masterbation that involves a great deal of concentration!” 😂

[@freespeech2261]

Love the porn film music

[@HewAndAwe]

Haha that’s 70’s funk 😇

[@crossgrainwoodproductsltd9230]

Beautiful restoration on that old beauty! I love old machines, old tools, anything older that was made better and stronger. I love your builds to, but could do without the music. I think you would have more subscribers without it. There's more of a demand for videos to be less music video, and more shop sounds. Just a thought...

[@HewAndAwe]

Sound design and music videos are two different things.

[@diarmaidok]

In your face saw stop

[@HewAndAwe]

Who'd of thought a 60+ year old saw have better dust extraction than a tinny sawstop :-D