1962 1963 1964 Impala SS Air Suspension, Full Walk Around!!!

[@63mesiken]

Clean setup an 62 bro. I went with bags also. Almost no maintenance for the most part.

[@El_Ceza]

Thanks bro , oh yeah almost maintenance free

[@reyzapata9375]

Just taking out the Impala for gas is a little cruise and relaxing for the soul. 😎🎉🙏🏽😇👍.

[@El_Ceza]

Thats right!

[@juliosandoval8244]

Nice ride bro.i cant wait to lay the frame and install my supercharger in my 62

[@El_Ceza]

🙏🏼

[@hansslopez8239]

Did you have to cut the front so it didn’t rub on the bag or it the bracket for the bag long enough to clear the frame ?

[@El_Ceza]

No cutting all fit perfectly

[@hansslopez8239]

@ thank you thinking about getting one for 75 Monte ,it’s had juice but I like the simplicity of air and the low maintenance.

[@El_Ceza]

@hansslopez8239 👌🏻👌🏻👌🏻

[@osejosteveo]

What gauge wire you used to power up 2 relay for compressor and how did you route it.

[@El_Ceza]

4 gauge and i came in from the firewall ran it under carpet to the back

[@osejosteveo]

Thanks for replying back

[@El_Ceza]

No problem

[@caprize2001]

I meant to say what size bump stop did you put did your wheels hit the fender when you were laid out

[@El_Ceza]

Oem

[@itchywenises]

Bro. Please please put jacksstands under any airlifted ride before crawling underneath. Nylon lines are prone to burst unexpectedly since they're standard operating range is 280psi or 320 degrees. I've burst a fewyaelf with the car just sitting at gas stations locked up.

[@El_Ceza]

Thanks for the feedback i noticed that when i was editing video

[@ectorico666]

I have a 61 impala I also live in Texas . Having trouble with heating up .. whats the part number on that radiator ..

[@El_Ceza]

amzn.to/3Qdr7Yx

[@josearanda9325]

Did you have two blue wires on your controller I have the same controller I have one baby blue and one dark blue

[@El_Ceza]

Yes i did Since i went with reverse orientation i did Light blue- all fill Blue- right front fill

[@caprize2001]

Hey what size pump stopped did you have to put so it wouldn't hit on the wheels from the fender

[@El_Ceza]

Im not running any It sits perfectly when layed out

[@robertgonzales7173]

Nice set up

[@El_Ceza]

Thank you 🙏🏼

[@georgenettlesjr1466]

Super cleanvsetup!!!! Luv It!!

[@El_Ceza]

🙏🏼

[@bpa3697]

👍😎👍 nice work, I'm looking to do that Wishbone set up in a 59 Bel Air, can you list where I could get one...thanks 👌

[@El_Ceza]

Here is the link where i purchased my wishbone the offer big variety of quality suspension products www.bcfab.com/58-64-Impala_c_645.html

[@bpa3697]

@@El_Ceza 🙋‍♂️ got the link👌 They have some cool products, thanks for the help, ill reach out to you with some questions when it time to bag it...👍

[@El_Ceza]

@@bpa3697 no problem! Sure thing

[@adamfonzarelli8318]

Why did you add balljoint spacers? For lift? How does it ride with no front shocks?

[@El_Ceza]

Yes for lift A bit bouncy depending how much pressure you have in the bags I do need to add some shocks it would make it alot smoother

[@adamfonzarelli8318]

Im about to do the exact same setup on.my 61 right now. I love how you rewired the avs switchbox in reverse like that

[@El_Ceza]

@@adamfonzarelli8318 nice, Insta shouldn’t be so bad Yeah I didn’t like how the wire would’ve curved on top that’s why I reversed it for cleaner tuck Good luck with the install

[@rubencortez8184]

Where did you get the extensions for the a arms.

[@El_Ceza]

I got them off ebay

[@juliosandoval8244]

Why didnt u install the angle fittings so it rubb by the headers

[@El_Ceza]

Wanted less restriction on the air flow for harder hit

[@juliosandoval8244]

@@El_Ceza oh ok my buddy does full air ride at his shop he does angle fittings makes it look clean

[@El_Ceza]

@juliosandoval8244 if you just want a clean look those fittings are the way to go

[@75yanez]

Ware did you buy the air tank?

[@El_Ceza]

amzn.to/3sTWbDU

[@adamfonzarelli8318]

So the Y bone eliminates the panhard bar?

[@El_Ceza]

Correct it eliminates side shift on differential when going up and down on your rear suspension

[@ruggedrickrude1946]

The pride is that YOU know how to do it !!! How much is a setup for air ride ¿ Corvette under that car cover ¿ Well done !!!

[@JohnSVT]

You don’t have rear bump stops?

[@El_Ceza]

I do not i need to install some poly stops

[@sixtreypete]

do you have links or places to shop for the champion radiator and 2 fans with shroud kit?

[@El_Ceza]

I sure do here is link www.jegs.com/i/Champion-Cooling-Systems/166/CC281K/10002/-1

[@sixtreypete]

@@El_Ceza awesome dude thanks so much!!!!!

[@El_Ceza]

@@sixtreypete no problem

[@rrmarbleandgranite5780]

Nice job dude

[@El_Ceza]

Thank you !

[@rrmarbleandgranite5780]

@@El_CezaQuestion do you have stock wiring harness?

[@El_Ceza]

Previous owner changed it out

[@streetclasscc5189]

quick question for you i just installed air ride in my car when i drain the tank everytime my car is all the way up it drops down when im draining my tank is that normal??

[@El_Ceza]

Not normal sounds like you either did not set up your solenoids on the correct position on your 4 way blocks or a solenoid is stuck open or leaking by

[@streetclasscc5189]

@@El_Ceza i thought it was normal that the valves need back pressure to stay closed its a 2 piece manifold type valves (block) one for front one for the back i just installed them brand new when i had the paddle switch i could drain my tank and my car would stay locked up

[@El_Ceza]

@@streetclasscc5189 not normal for car to air out when you drain your tank Once you activate valves to air up bag air stays in line so there is no way for air to return to tank When you dump air should go to atmosphere I can only help you out so much without seeing your set up and how it is wired

[@carloszapien8174]

You’re running 1/2” lines correct?

[@El_Ceza]

Yes, correct

[@carloszapien8174]

@@El_Ceza how do you like them? How’s the rise and drop on the vehicle? Is it quick? I’m not sure whether to run 1/4” or 1/2” lines on my 64 Impala frame off. Just want to get some insight.

[@El_Ceza]

@@carloszapien8174 i love the 1/2” lines it hits hard and dumps fast you dont have to sit there and wait like you would with 1/4” lines

[@edilara1979]

Clean set up

[@Mz.Hazel01]

Nice🔥❤️thanks for sharing, where did u get you 9 Gallon tank?

[@El_Ceza]

Thank you 🙏🏼 Im sorry its a 8 gallon 9 port tank here is the link amzn.to/3ZzGVqB

[@Cheez1979]

Clean bro.

[@El_Ceza]

Thank you brother!

[@rayflores8411]

Looking good thanks for sharing.

[@El_Ceza]

Sure thing, started an ig bro El_ceza uploaded some pictures of the car

[@rayflores8411]

@@El_Ceza cool I'll ad you

[@rayflores8411]

Right on

[@robgonzalez6255]

I just bought a 62 but it needs a front bumper and brackets, anyone point me in the right direction to buy them??

[@El_Ceza]

There are many website with impala parts which you can request a catalog from or buy online

[@rayflores8411]

Are u running ss7's to the back? Or do u have ss8's?

[@El_Ceza]

Ss7 all around

[@rayflores8411]

@@El_Ceza right on

[@PeachCoastLowrider]

@@El_Ceza I'm looking at the ss7 too .I have air lift now . my 63 is a lil bouncy . I'm also looking at a 9 gallon tank . how long does it take to fill up with just the 2 comp?

[@El_Ceza]

@@PeachCoastLowrider it takes about 15 mins from empty but im running 200 psi, i left my stock rear shocks on and its not bouncy only up front a bit due to no shocks yet

[@PeachCoastLowrider]

@@El_Ceza I need your exhaust guy lol I had mine custom done and it still.hangs

[@victornatividad]

You have a 9 gallon tank?

[@El_Ceza]

Yes

[@victornatividad]

@@El_Ceza did you piece it together or did you buy a kit ?

[@victornatividad]

@@El_Ceza all I see is 8 gal

[@El_Ceza]

I put the kit together myself

[@El_Ceza]

Must be an 8 gallon bro Its been a while since i purchased it

[@israelvirgen5742]

Nice!!

[@MrLSalazar714]

👍🏽

[@darkNovaskar]

Telling someone not to hit your airbags just doesn't have the same ring to it 🤔

[@djwizardpatino8240]

Quien instalo las bolsas

[@El_Ceza]

Yo hice la instalación del sistema

[@djwizardpatino8240]

@@El_Ceza que bien me gustaria ponerle bolsas a mi 63 donde compraste las partes

[@El_Ceza]

Se siente bien suave, compre las partes en diferentes websites no es un Kit que venden mas si los hay

[@rayflores8411]

What's your IG?

[@El_Ceza]

I do not have one Ray, sorry

[@rayflores8411]

@@El_Ceza ah ok cool

[@josha7548]

Nice set up

[@El_Ceza]

Thank you 🙏🏼