1962 1963 1964 Chevy Impala Texas Lok Up Install, Lowrider, NO extended A arm needed! Direct bolt on

[@LowriderRios1316]

Clean deuce…the angle on that spacer helps out a lot with the air dumped takes extra stress off the balljoint

[@yumalim]

These are called “high lock” pieces but they do nothing to lift your car higher. It’s only if you need more space for your uppers to move if you are bottoming out on the frame. They are called this because if you have 10 inches of lift or more your uppers(after shaving off frame bump stops), will hit the frame. So you get extended and or ball joint extenders. They do break but free up space for the lift.

[@yumalim]

Nice duece bro, makes me miss mine. I bagged mine too and went through all this stuff.

[@yumalim]

These will break when you hit a turn one day. I was researching these when I was doing mine. The only one I found that wouldn’t break was the big off road bolt they use. Be careful man.

[@caddi70]

I agree these aren't safe for hydraulics at all and only safe parked. these look very sketchy

[@yumalim]

Also you still have the bump stop on the frame under the uppers which stops the lift. Those cut off to give you more room.

[@El_Ceza]

Thanks for the input ill look into it. As far as the extenders they’ve work well for me and gave me the positive camber and higher lock up i was looking for. Ill actually look for grade 8 bolts to replace the ones on there to prevent shearing. Thanks again bro

[@yumalim]

@@El_Ceza ok cool. The uppers don’t give you any higher of a lock up. It’s all from the lowers to the frame cup. More in there gives you more lift. Uppers just hold the spindle in place.

[@El_Ceza]

I actually got more lift, the reason i know is that now my rear bumper scrapes which before it didnt

[@yumalim]

@@El_Ceza when you replace the bolts measure bottom of the bumper to the street then also when you take them off. That would be a good video to make.

[@El_Ceza]

The plan was to replace one by one instead of fully removing them lol Here is the thing, if the lowers are the ones that give you a higher lock up why are the upper A arms the ones that get extended and not lowers for higher lock up?

[@sisnce]

one thing ive seen alot of hoppers do is run a longer bolt then add two nuts on the ball joint..think thats what iam gonna do but might check out hoppos balljoint extenders caus i think they are like powerball where they move and take stress off but not sure..awesome ride love it !

[@Todaro55555]

Bro were did you get them ball joints Extension I need some exam for my car. Do you have a website are a number or something? Thanks, bro,

[@El_Ceza]

Info on description tell them i sent you

[@RonaldStephens-k2j]

Excellent

[@LowriderRios1316]

Only thing that really changes is the mounting point of the balljoint base…not a bad set up

[@SixDueceImpala]

I just purchased a set of the lock up’s for my 62’ impala. Now that you’ve had them for some time how do you like them? Do you drive in them a lot?

[@El_Ceza]

Never had issues with them Car rarely got driven though

[@eazymoneyTX]

❤❤❤❤❤ SICK SETUP 🏆

[@El_Ceza]

Thank you 🙏🏼

[@davidreyes8138]

It's all good Homie Nice Car for sure keep up the good Work.

[@caprize2001]

Hey I asked you the other day about bump stop what bags are you running in front are they a single bag or is it a double bag

[@El_Ceza]

Im running ss7 bags here is link amzn.to/40ydcze This video has all links to what im running on description kzbin.info/www/bejne/eYC3Znydm7GipNE

[@gamingforgoodgamingvideo2747]

Thank you

[@GRamos-wx1lz]

I used those on a g body, no good, spindle would dig into the bag, had to go with extended upper arms

[@El_Ceza]

Thanks for the input up to now i have not had any issues on the impala mock up

[@HectorPerez-yp2mi]

Do u have shocks in the front end thanks

[@El_Ceza]

I do not

[@rayflores8411]

Great video, This was the main reason I was debating airbags over hydraulics, did you notice a big difference in your car not laying as low in the front anymore? I am also looking to make a high lock up in the back with airbags, do you have any suggestions? Thanks

[@El_Ceza]

Thanks, there is not a big difference in regards to how low it sits. It is still really low, only thing i did notice is that my tires are really close to fender inner wells i clear them but if you run 14” wheels i feel like you would hit For higher rear lock up you could do triple bellow airbag but you would sit maybe 1 1/2” higher when aired out

[@rayflores8411]

@@El_Ceza I appreciate your reply. Do you feel the difference in how low the front lays now is about as high as the extenders are? I assume a few inches? Did your car ever lay frame to begin with? I am looking into triple bellows, do you know where they sell them at? I appreciate your advice

[@El_Ceza]

I cant feel the difference on how low it lays, my car has always laid on my mufflers due to them being 1/2” lower than my frame and after the extenders it feels the same but the positive camber messes with the eye. The guys over at USA Motorsports should be able to help you with the triple bellow rear bags as well. Not a problem, good luck with your build

[@rayflores8411]

@@El_Ceza Kool thanks brother I appreciate you taking the time to reply to me. I look forward to seeing you post more on your car!.

[@El_Ceza]

Yes sir not a problem Be on the look out i have some more stuff im doing to it and ill do a walk around showing my air suspension set up

[@chrstiano2497]

Do they make these for 97 Chevy s10?.. I have a s10 And thought if they made something like this id like to get one for my truck...

[@El_Ceza]

Im sure they do

[@chrstiano2497]

@@El_Ceza I'm going to have to check around man . Thanks for response

[@El_Ceza]

@@chrstiano2497 no problem

[@AzBigD]

great vid man! these do work for a lay and play setup either hydraulics or air but please do not use these on a hopper seen the bolts snap.

[@El_Ceza]

Thanks! Definitely not for hoppers lol

[@troymccoy2654]

This can work on hydraulics right I thinking abt buying to Texas lock up

[@El_Ceza]

It can but they don’t Recommend if you are doing 3 wheel or hopping

[@troymccoy2654]

@@El_Ceza Thxs u homie

[@El_Ceza]

👍🏻

[@LDMLIFE]

Nice ride 😎👌🏾

[@danielmaldonado-yg3ge]

Hey man sweet ride. Did you have to do anything to get the wheels to clear the skirts?

[@El_Ceza]

Thank you 🙏🏼 I did here is a video on them 1962 Chevrolet Impala Fender Skirt Install and Air Ride Pressure Gauge Upgrade kzbin.info/www/bejne/rIiUZpmLhsmnl6M

[@kgkg6649]

62 is dope :)

[@HOGSIDESJTV14BOSSHOGRECORDS]

Looks so good tho!💯🤘🏼

[@JuanSanchez-oi3wv]

Cool 😎

[@alfredopolojr6212]

What disc brakes you running on front

[@El_Ceza]

Camaro spindles and rotors

[@richardjimenez7394]

Cool looking ride.

[@anthonyking5391]

Bags come on nice ass Ride Hot Rod or Lowrider save bags for a Navigator or something

[@Vic-gh1vx]

Clean car! Did you have to cut the bump stop bracket? Just got my lock ups I didn’t see you do that on the video. Let me how they are working so far thanks.

[@El_Ceza]

Thanks bro! I did not have to cut the brackets, all is working well up to now with no issues

[@Vic-gh1vx]

@@El_Ceza nice! Thanks again keep up the good content! Imma do mine this weekend.

[@El_Ceza]

Not a problem, thanks for the support. Sweet! Let me know how it comes out

[@Vic-gh1vx]

@@El_Ceza for sure!👍🏼

[@JohnnyTorres-i3y]

love the the snappyness of your ride. what size of line are you using? car looks really good!!

[@El_Ceza]

1/2” along with valves Thank you 🙏🏼

[@rrmarbleandgranite5780]

@@El_CezaDo you still have these on your car? Still happy with them?

[@El_Ceza]

@rrmarbleandgranite5780 they are still on it I never had any issues with them

[@Hardbasspredator]

carnal can you provide me with measurements, i have the materials to build them in my garage, they are pricey from the vendor in san anto

[@El_Ceza]

Sold the car

[@JohnSVT]

Will these help with negative camber?

[@El_Ceza]

Yes they will

[@JohnSVT]

@@El_Ceza thanks I definitely need to look into these then , I went to get an alignment done , the toe was fix but camber wasn’t able to get aligned that well , still looks like it needs more positive camber

[@JohnSVT]

What’s the update on these high lockers bro , are they solid?

[@El_Ceza]

Solid havent had an issue bro Then again i dont drive the car as much to really be able to tell

[@leonelsandoval9686]

Where can I get some of thos bro.?

[@El_Ceza]

Usa Motorsports 1125 W. Hildebrand Ave. San Antonio, TX 78201 They’ll ship them to you, you can find their info on google maps Great customer service by the way

[@HOGSIDESJTV14BOSSHOGRECORDS]

Suprized there those rubber bushing not poly

[@El_Ceza]

I bought poly already just need to install, makes a big difference

[@HOGSIDESJTV14BOSSHOGRECORDS]

@@El_Ceza yes sir.thats pretty fast air ride

[@t.estrada7626]

Did you find these online or at a local shop?

[@El_Ceza]

Usa Motorsports 1125 W. Hildebrand Ave. San Antonio, TX 78201

[@t.estrada7626]

@@El_Ceza I currently have single bellows bags in front .. if I was to do the lock ups , would I need to switch to double bellows bags ?

[@El_Ceza]

You dont, that ill be fine

[@El_Ceza]

You will be adding 2.5” to your lock up

[@t.estrada7626]

@@El_Ceza ur lock up looks good ! Have a red 64 with bags .. guna upgrade to 1/2 lines and all .. USA motorsports sell everything u need ?

[@gamingforgoodgamingvideo2747]

Where can I get it you order online

[@El_Ceza]

Information is in description, give them a call to order is how i did it. Great customer service btw

[@Syxtus64]

Where did you get the high lock up kit?

[@El_Ceza]

Shop in San Antonio, Tx. Information is in the description

[@santiago8698]

I need these

[@LOWLABORUNION]

nice!!!

[@El_Ceza]

Thank you !

[@algonzalez482]

Link

[@Hardbasspredator]

i want to put them on my convertible 64

[@El_Ceza]

Gives it a different look for sure!

[@davidreyes1559]

Take your purse off Homie and hit that spindle not the nut . Come on Homie you can do it.

[@El_Ceza]

I was but didnt have it close by lol, you’re actually the first one that caught on to that haha 😂

[@B2sdad512]

nice deuce

[@El_Ceza]

Thanks bro

[@javierl4782]

ese compa ceza ponle hydraulics wey,,airbags son pa trokas,,

[@El_Ceza]

Un dia de estos los voy a sorprender!

[@got2getit204]

We you won’t be doing no hopping!

[@1hernandez78]

U need some sway bar bushings

[@El_Ceza]

I do, i had overtighten them havent replaced them yet Thanks

[@parrisjackson7102]

No disrespect to airbags, but this needs fluid...

[@El_Ceza]

Coming soon!

[@kangkong658]

Don't know homie look like balljoint gonna brake if you roll lowered. Clean duce tho

[@El_Ceza]

They are really solid havent had any issues, i cant roll lowered have to come up at least 1.5”due to my mufflers and tire being close to fender with the positive camber now. Appreciate it, ill be on the look out and ill post if anything goes wrong

[@yumalim]

@@El_Ceza they may be solid but the little bolts will break. Be careful man. I feel if you shave the bump stops off the frame, you don’t need these or the added danger.

[@El_Ceza]

Ill swap bolts to grade A to be on the safe side, thanks

[@viddy228]

Real hydraulics don't use air bags..

[@El_Ceza]

Agree 100%! When i come across the convertible i want, im going all out with a hydraulic set up 👌🏻 In the mean time ill cruise and enjoy this one comfortably

[@rogerromo2674]

Airbags are for mini trucks Hydraulics are for lowriders

[@DudeitsShred]

Shit opinions are for politicians. Car culture is for non haters.