1963 Galaxie Chassis Build Part 1

Рет қаралды 7,206

RAC GARAGE

Күн бұрын

Пікірлер: 47

@darylmelville3687 10 ай бұрын

I thought there was a new guy working with Jacob, but it was you Travis, sporting a new hair cut 😂

@johnkranz4004 10 ай бұрын

Model A Looks Travis ‘s Galaxy gonna be a good one Nice Haircut

@TheCrackerBox 10 ай бұрын

Thanks for another , Brother !

@PaulKrueger-is9lj 10 ай бұрын

Don't forget to pack the bearings. Looks like a really fun project. Can't wait to see more.

@andreworchard402 10 ай бұрын

Much better hair style now was getting jealous of how much you had LOL

@johnstep9163 10 ай бұрын

Beautiful work on the A, I'm sure the Galaxie will be just as nice. By the way nice hair cut.

@RACGARAGE 10 ай бұрын

I hope so!

@bobhalstead1879 10 ай бұрын

The 4 link works with a panhard bar but works much better with a watts link setup.

@RebeccaGriffin-b8n 9 ай бұрын

I know that you made this comment about a month ago, I agree with you, I always wonder why they aren't more widely used, after all, the diff stays in the middle of the vehicle regardless of the height of the vehicle.

@lindaalexander7105 10 ай бұрын

The model a sedan you just finished must be 3 times stronger than stock, almost like unibody, great job!

@RACGARAGE 10 ай бұрын

Thanks, it sure was rigid!

@johnkelly5487 10 ай бұрын

Good luck on the Galaxy

@erniehoffer1784 10 ай бұрын

Great videos. Move to Southern CA.

@bobhalstead1879 10 ай бұрын

Light a candle or 2 and put under starter.we did this on tractors.broken bendix spring

@raywallace1104 10 ай бұрын

My dad had a 41ford in the winter he would clean the ashes out of wood stove and put them under the oil pan to worm the oil

@RACGARAGE 10 ай бұрын

That’s neat, never heard that before

@nboldrini 10 ай бұрын

I like the way you have a short preview before the intro. I t may be time for a fresh intro though.

@timmiller260 10 ай бұрын

And seals

@michaelasher8084 10 ай бұрын

Your starter is working it the silinoid that engages the starter to the flywheel that isn't working quit banging on it till you fix the silenoid

@scotthumphries367 10 ай бұрын

Who makes the front a arm kit

@bobhalstead1879 10 ай бұрын

The calipers look like gm.if so are they large bore.speedway and other companys sell them and they fit anywhere a standard caliper fits and add 30% more stopping power .

@akumushikyo 10 ай бұрын

Repeated comments about not greasing bearings, but nothing about missing seals… or nothing being torqued. Just a rough mock-up, done this a few times now, stuff always going on and off, no point till final assembly.

@RACGARAGE 10 ай бұрын

THANK YOU!!

@joepacheco4038 10 ай бұрын

Never run dry bearings even for mock up. Don't have to pack fully, just like body tools finish is compromised from transferring irregularities.

@micseph6186 10 ай бұрын

Freezing cold and ears lowered ...

@dennissheridan1550 10 ай бұрын

Travis, you were heating the motor of the starter not the housing that houses the gear. The problem is that the grease on the starter shaft is frozen and you need to defrost it for the gear to be thrown out to the flywheel. I am assuming you are going to "C" notch the frame, that being the case I would suggest you go online to Bellos Kustoms and watch Mike Bello install four link on different cars.

@RACGARAGE 10 ай бұрын

Yeah I figured frozen grease was the culprit. I’ve done my fair share of 4 links also. Bellos does a good job

@Pedroisanickname 10 ай бұрын

I've heard of hitting it with a hammer or crowbar, but never blowtorch.😂

@patrickfahring6086 10 ай бұрын

How ya gonna stay warm with that haircut 😅😅😮

@micseph6186 10 ай бұрын

Shipping Day

@joewolf4483 10 ай бұрын

Where did you get those spindles from ?? ... I hate to say it but those are the scariest ones I've ever seen ... you've got a 4000 lb car applying G force on a hopefully noncompromised weld on both top and bottom ... I sure hope you realize that now you modified them you assume a lot of the liability if they for some reason fail ... I think I would try to gusset them if nothing else ... anytime you do chassis work for someone else you taking a chance ... just my thoughts ... don't want to see you have any problems later ...

@micseph6186 10 ай бұрын

Use the Save-a-door Dali.

@mikehomier8314 10 ай бұрын

Why didn’t you pack the bearings and put the seal in place?

@RACGARAGE 10 ай бұрын

I’m mocking it up, gonna blow it apart later. No point in getting greasy

@johnjason7204 10 ай бұрын

Is the 63 yours or customer work....saw 40 on FB

@RACGARAGE 10 ай бұрын

Yes sir customer job

@JamesBeukelman-f5j 10 ай бұрын

Real men have short hair! Comfort over mane.

@stephengent9974 10 ай бұрын

ya didn't grease the wheel bearings

@tuckertuckertuckercp 10 ай бұрын

Thinking the same thing

@Lanni_747 10 ай бұрын

It’s mock up. Settle down guys. You really think all the control arms bolted on are going to stay on a rusty/unpainted frame ? Come on. Use some common sense here.