I finally install my front grill and bumper and get a little closer to getting this impala back on the road
Пікірлер: 71
@chriskidd49412 жыл бұрын
Looking good. I just wanted to say I appreciate your long detailed videos. They help a lot. This one video was sped up and I got lost for a second. You're the only detailed information on KZbin for the 66 impala and I appreciate all you do on this car. I can appreciate the fact that you run into problems and still work past them. It teaches us what to look out for. I say all that to say the length of the video doesn't matter as long as we get all the information we need out of it. Keep doing what you been doing! I'm sure everyone else appreciates it as much as I do. Thx
@cali530marcos32 жыл бұрын
Thanks, it means a lot to me
@stevefick39192 ай бұрын
I have a 66 Caprice that has been restored, but I would like to do a little work on the front end just to clean it up a bit. Your videos have been great! Really helping me with disassembly and reassembly. Thanks!
@cali530marcos32 ай бұрын
Glad I can help
@sergiohernandez12362 жыл бұрын
Gracias Carnal,your giving me motivation to finish my 66 by myself. Nobody wants to help when they look like rust bukets but want to ride in it when they are done.
@cali530marcos32 жыл бұрын
Yea that’s pretty much how it goes unless u have bbq and beer going
@luisgardea2629Ай бұрын
these videos are helping my impala install
@cali530marcos3Ай бұрын
@@luisgardea2629 glad I can help
@coffeebean59752 жыл бұрын
Good job on the front bumper assembly, I'm learning alot from watching your videos. I'm starting my 66 impala project.
@cali530marcos32 жыл бұрын
Your welcome, and good luck, it’s fun and stressful all in one, it’s just finding the time to work on it that’s the hard part
@royfernandez86672 жыл бұрын
Bro keep making these because I need to put mine together again mostly the trim !
@user-wc4uh4rl3z7 ай бұрын
I had a 1966 ss 327 wen i was 14 back in 1981 white with light blue interior northern calif 🇺🇲
@cali530marcos37 ай бұрын
Nice, mine is originally white exterior with turquoise interior, planning on going back to that, it’s taking me a little longer than I thought because I got friends that want me to work on their projects
@Brad66Impala2 жыл бұрын
Awesome video man. Cars looking great! My buddy pulled the whole front end off my 66 and I was really sweating how I was gonna put it all back together but this will help a ton when the time comes
@cali530marcos32 жыл бұрын
Yea, the guy who had the car before me took it all apart to do a frame off or something so I wasn’t sure I had all the parts, but I got to digging in the trunk and found a lot of them
@artnardone2 жыл бұрын
You're doing a great job building and P thank for making your videos.
@cali530marcos32 жыл бұрын
Thanks, I appreciate u watching
@DalyTheThird Жыл бұрын
Excellent job, man! I have an identical year Caprice that is running and driving. Although not a complete ground up build, I will be taking pieces and parts off of her to inspect, clean , shine , replace and/or respray primer. These videos help me to figure out what goes where and how to put it all back together. Piece by piece is all we can ask for (on a limited budget) and you have inspired me to keep going! 🤘🤘
@cali530marcos3 Жыл бұрын
Thanks, good look on ur build,
@cali530marcos3 Жыл бұрын
It’s not a professionally frame off, it’s just me trying to put my dream car back together, it was the cheapest one I could find, it was also rust free
@DalyTheThird Жыл бұрын
@@cali530marcos3 I appreciate you!!!
@thespraysociety3276 Жыл бұрын
Thanks for these videos, Im getting ready to put my 66 Impala back together
@cali530marcos3 Жыл бұрын
no problem, I'm learning as i go cuz these cars have a lot of little pices
@4cimvi3k Жыл бұрын
awesome video
@cali530marcos3 Жыл бұрын
Thanks
@user-wc4uh4rl3z7 ай бұрын
57 young 1966 🇺🇲northern calif
@user-wc4uh4rl3z7 ай бұрын
It looks good 🇺🇲
@JoshuaMartinez-js6eg2 жыл бұрын
Good information. Looks like valve covers are opposite pcv valve is always on left drivers side
@cali530marcos32 жыл бұрын
these center bolt valve covers have 2 pvc holes,
@chetmf9 ай бұрын
Sometimes you gotta walk away for a minute when you stress out.
@cali530marcos39 ай бұрын
Yea, if u don’t renches start flying and things start getting damaged
@abelvarela1231 Жыл бұрын
Good job like the videos
@coffeebean5975 Жыл бұрын
Marcos, The grill looks great, what did you do to clean it up?
@fabiansaavedra69174 ай бұрын
Dope
@cali530marcos34 ай бұрын
Thanks
@jlpsuroeste2 жыл бұрын
I use steel wool for the bumper and grill and the moulding, fine wool only.
@cali530marcos32 жыл бұрын
Imma try some fine wool and paint thinner
@jlpsuroeste2 жыл бұрын
I’m working on mine too, your videos are helping out gracias carnal.
@cali530marcos32 жыл бұрын
@@jlpsuroeste no problem, I’m learning as I go too
@medicineman1202 Жыл бұрын
Thank for sharing the knowledge. How do the after market parts fit? I'm debating if I should restore my OGs or just purchase repop grill assembly.
@cali530marcos3 Жыл бұрын
All the parts I installed are OG so they have scratches and blemishes, but they will do for now
@kevinbenitez4346 Жыл бұрын
I bought new lower bumper but I was looking to remove restore the rest, what was all the bolts & screws you’ve used in this video. It’d be really helpful in my build thank man!!
@cali530marcos3 Жыл бұрын
For the grill I think I used 1/4 size bolts and nuts, for the lower valance I can’t remember, I just tried out bolts that I had in my tub of bolts to get a size comparison and went to a hardware store and got them all
@impalaman454611 ай бұрын
😎💯👍👍
@adriano3578 Жыл бұрын
What are the bigger bolt sizes that you used for the bumper and the little tray under the headlights
@cali530marcos3 Жыл бұрын
For the bottom grill that goes on the valence I think the were 1/4 and for the bumpers I think they were 5/8
@dnbramirez Жыл бұрын
Any more work on the 66? Mine will be home next week after years a paint shop
@cali530marcos3 Жыл бұрын
I’ve been doing little things off camera like rebuilt the rear brakes, installed new shocks up front and sway bar end links, I should’ve recorded it but oh well, imma take it in to get the exhaust done in 2 weeks so I’ll record it and post it up
@dnbramirez Жыл бұрын
Hey carnal What kind of head light did you install and where you guy them. Did the just fit in or did you modify ?
@cali530marcos3 Жыл бұрын
@@dnbramirez I got them on eBay, they fit perfectly with no modifications
@dnbramirez Жыл бұрын
@@cali530marcos3 Can you send link and let me know description? Trying to get all my stuff to start putting back together.
@cali530marcos3 Жыл бұрын
@@dnbramirez www.ebay.com/itm/263497214539
@Lowridersdoggs6 ай бұрын
Is the grill supposed to go on with rivets?
@cali530marcos36 ай бұрын
It came with rivets from factory but I put it on with 1/4 inch locking nuts and bolts
@carmoon18 Жыл бұрын
What size bolts and nuts i need to install the grill and accessories?
@cali530marcos3 Жыл бұрын
For the grill I went to ace and got 10/32 bolt with 2 washers a locking washer and bolt, u need like 10 bolts
@chuchedog Жыл бұрын
Parking Lence lights
@cali530marcos3 Жыл бұрын
I have the parking lights assembly but the lenses were broken on them so I didn’t install them
@abelvarela1231 Жыл бұрын
What kind of black paint are you using
@cali530marcos3 Жыл бұрын
Semi gloss from duplicolor
@cali530marcos3 Жыл бұрын
www.ebay.com/itm/224611147425
@nate12362 жыл бұрын
Any update on that eyebrow trim?
@cali530marcos32 жыл бұрын
Haven’t had time to work on the car yet, but imma get back on it hopefully this weekend
@Freejohnsilkyputty23 күн бұрын
Hit that mute button. You don’t need stupid music man