1967 Plymouth GTX By Revell

Come along as I begin to build this really cool Revell 1967 GTX kit!
Visit Hobby Nut Models
www.hobbynutmo...
Join the Model Car Videos Facebook Group!!
/ 488916899181391
******************************************************************************************************
Building items that I use available on Amazon.
amzn.to/2YIMcid Tamiya Masking Tape
amzn.to/2YiLtE6 Bare Metal Foil
amzn.to/3ny4htf Tamiya America, Inc Mark Fit, Solvent 40ml Bottle, TAM87102
amzn.to/2NxKH3X Decal Setting Solution-Micro Scale Micro Sol
amzn.to/3ig6Dfz TAMIYA America, Inc Extra-Thin Cement 40ml Quick-Setting,
amzn.to/3nIq9lY TAMIYA Panel Line Accent Color Black
amzn.to/3nuuvgk Bob Smith Industries BSI-157H Maxi Cure/Insta-Set Combo Pack
amzn.to/35xEFXd NEO BCN Siphon Feed Dual Action Airbrush
amzn.to/3nA9roA Clear Parts Cement-1oz
amzn.to/3cemEBI TESTORS Plastic Cement Liquid, 1 oz
amzn.to/3iPnK87 TESTORS Plastic Model Glue tube
amzn.to/3sTeiFv AMT 1:25 Scale 1968 Shelby Mustang GT-500 Model Kit
amzn.to/3sWqN31 AMT 1970 1/2 Chevy Camaro Z28 1:25 Scale Model Kit
amzn.to/36h2LWy AMT 1967 Chevy Chevelle Pro Street 1:25 Scale Model Kit
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
******************************************************************************************************

[@algray1195]

Following your builds one on one! Thanks!

[@RoadRunnergarage8570]

Nice detailing on what you have done so far!!

[@alancyr3100]

Always liked that pale yellow color. Keep up the good work.

[@modelcarvideos5829]

Thanks Alan!!👍🏻👍🏻

[@JethrosGarage-op4bo]

Nice work on the GTX, the color looks great!

[@modelcarvideos5829]

Thanks Jethro!!👍🏻👍🏻

[@michaelcorcoran8692]

For mixing to alter a color, start with the light color, & ad the darker color in small increments yo achieve the shade you desire. It takes a lot og white to "lighten" a color. It is much easier to achieve if you start with a white base color.

[@modelcarvideos5829]

Good to know! I'll try that!! Thanks

[@chuckhand8622]

You correct Sir, start with the white, and add the yellow!!!!

[@jimklette580]

great tip thank you

[@seanh2390]

I never would have thought of that. will give it a try. thanks!

[@Darckstar52]

You can brush on semi gloss clear then your flocking. Great looking kit.

[@ronstewart9792]

Boy it is looking great. Will be back for more. Ron

[@modelcarvideos5829]

Thanks Ron!!👍🏻👍🏻

[@jimklette580]

Paint looks great I like the chrome got to try it. Thanks for the air brush tip you gave me now it's just time to get used to it.

[@samuelvasquez8170]

Love the color. I have the kit and I think I will paint it like you did.

[@almoffat7504]

Nice colour it’s going to look seeeet when your done

[@modelcarvideos5829]

Thanks Al!!👍🏻👍🏻

[@davidparsleyscustomscaleemerge]

Paint looks great!!

[@jeffhaty5715]

Nice paint

[@modelcarvideos5829]

Thanks Jeff!!👍🏻👍🏻

[@alvinpowell6189]

I really like this kit. I also like the color you mixed up! Nice job.

[@modelcarvideos5829]

Thanks!!

[@crashandburngaming5103]

Nice build. For carpets I use dollar store embossing powder, Same method. Brush white glue where you want the carpet and let dry, brush off excess. Flocking is stupidly expensive. Another thing I learned is dipping the glass in futura. Comes out absolutely perfect and if there were scratches or blemishes in the mole they are gone. Nice job on the foil.

[@GrandNational66]

Clear embossing is good as well you can paint under it for a larger ranger of interior colours.

[@modelcarvideos5829]

Thanks!!👍🏻👍🏻

[@GrandNational66]

That GTX is a good candidate for a vinyl roof.

[@kcshobbybench4763]

Always start with the white and then add the color you want. If you ever got paint at the hardware store. The base is white and then the color is added.

[@RestorationAustralia]

Great looking kit.

[@modelcarvideos5829]

Thanks!!👍🏻👍🏻

[@hotrod9199]

I love building model car's and trucks I do this as a hoobie and I enjoy doing as well

[@jimgallagher2979]

I did the Sox & Martin kit in gloss white w/black interior and w/o all the fancy decals. It turned out great and looks great. I was working for Chrysler when this car came out. It was my first real job.

[@captnemomodelingzone7850]

Great video it's good all you do your paint . Have a great week

[@modelcarvideos5829]

Thanks Neamon!!👍🏻👍🏻

[@THROTTLEPOWER]

Nice video, the GTX is gonna look great!

[@modelcarvideos5829]

Thanks!!👍🏻👍🏻

[@brandondrescher2182]

Looking good Matt. Got this same kit in my stash to do some day soon. Glad it looks like a good kit.

[@modelcarvideos5829]

Thanks Brandon!!👍🏻👍🏻

[@davidparker2259]

I built that kit years ago, and it is a good one. Mine’s silver with Cragar SS rims all the way around, a cross-ram intake, and 4 mufflers and exhaust pipes. It replicates one I saw in a magazine. Yours is coming along nicely. You should try embossing powder and paint for your carpets. It works really well.

[@bigcharliesmodelgarage296]

Looking pretty good so far.

[@modelcarvideos5829]

Thanks Big Charlie!!👍🏻👍🏻

[@Red-rl1xx]

I've got that same model. Just painted the body the other day. Painted it yellow, too. I'll get to building it at some point. I just got done with my Finish It Up In Feb. GB entry today. I was giving some thought to getting into that Rat Fink GB with my Mysterion.

[@michaelkeogh8454]

Nice build so far. I have attempted this kit. I don't remember why my build got stalled, but it is off to the side of my bench. It probably has something to do with my perfectionist problem. For carpeting, I use embossing powder and enamel paint in the same color as the powder as a brush-on glue.

[@modelcarvideos5829]

Thanks!!👍🏻👍🏻

[@dominiquevandevoorde8362]

superbe bravo beau travail

[@modelcarvideos5829]

Thanks Dominique!!👍🏻👍🏻

[@stephentabor8798]

Hey Matthew, I don't want to put the "whammy" on you bur it's nice to see that you seem to have had much better with your painting recently. Nice job.

[@modelcarvideos5829]

Thanks Stephen!!👍🏻👍🏻

[@mightylonesome9426]

I built two of these. The second one i sanded down most of the chrome trim, rocker panel, base of rear roof pillar, etc. It took a while but I think the car looks better without all the chrome. Anyway, looking forward to your part II, take care.

[@jimsmodelcargarage3196]

Looking real good Matthew, I built that kit a couple years ago. Was a nice kit. KUTGW buddy.

[@modelcarvideos5829]

Thanks Jim!!👍🏻👍🏻

[@njcivicwagon1]

Looking good. Love the color mix. Nice job. I’ll be tunning for updates

[@modelcarvideos5829]

Thanks!!👍🏻👍🏻

[@RJDCR]

nice RJ

[@modelcarvideos5829]

Thanks RJ!!👍🏻👍🏻

[@CaptSpeirsB744]

Body looks great. For carpeting try Embossing Powder. You missed the flash because you didn't prime first, it is very difficult to see flaws on white plastic vs gray primer. Try using the body color darkened as a panel line wash, looks more realistic. Can't wait to see this car finished, should look great.

[@jeffreymiers8793]

The box illustrations remind me of GM butternut yellow which to me, is a weird tan. LOL

[@Projects-In-Progress]

For your interior, try Embossing Powder with Spray Adhesive. Tape off the areas you don't want spray adhesive on or Embossing Powder on. Once sprayed then apply your Embossing Powder then use your finger and lightly press down on the Embossing Powder. Leave it set for about 10 minutes then turn over your interior pieces with the Embossing Powder on over a paper towel and easy tab the back sides removing the Powder.

[@chriscallen6897]

This is turning out great! I can’t wait to be able to airbrush my models.

[@troystahnke6441]

It is a great build! Did one myself but I used the revell dodge charger chassis underneath. Still came out great😊

[@ModelCarHobbyist]

I cant wait to build that kit

[@KBCC_Garage]

I’ve been wanting to pick this kit up for some time. Got too many started to grab this one yet. For now, I’ll watch your build. The yellow looks great! 😎👍🏾

[@modelcarvideos5829]

Thanks Clifton!!👍🏻👍🏻

[@ricks69z28]

Looks great so far. Rick 🤓✌️

[@modelcarvideos5829]

Thanks Rick!!👍🏻👍🏻

[@styrenebuilds6851]

This kit shares parts from the 67 Coronet kit

[@modelcarvideos5829]

Cool!

[@peterbarker6249]

Colour is a pretty good match to the box art . How about tinting (smoking) the windows slightly to add some contrast ? Look forward to the next part of the build .

[@jennifercole281]

The 2nd set of door panels look like they are for a convertible version of the GTX; perhaps some earlier incarnation of this kit was a 2-in-l...

[@doozersmodels3193]

Looking forward to seeing you finish it looks great so far.... I have the Foose version.... build on

[@modelcarvideos5829]

Thanks!!👍🏻👍🏻

[@keithwisell8528]

I watch the other model building website. He in my opinion tries to see how fast he can build them. He doesn't do a lot of prep before he paints them. I enjoy building them and make them look different than the pictures of on the box. I'm not in a hurry like the other website shows. Its supposed to be enjoyable.

[@michaelhintzmikesminiature1812]

Looks like you've got off to a Great start. The light yellow is growing on me. I'll be watching

[@guylotz9072]

start with the lighter color first... then add drops of the darker till it gets where you want it

[@memorylanemodelcars]

This is the Donor kit for my 1:1 66 Sport Fury (resin body)

[@JohnPol]

I use 2K clear and it only cost 45 bucks but I only bought a qaurt can clear coat about 100 cars with it

[@modelcarvideos5829]

I've got to get some!

[@garyparker2969]

I've Got That Kit in My Stash (Somewhere) LOL, Love The Color Sir, looking Forward to More Updates. Have a Blessed Week.

[@modelcarvideos5829]

Thanks Gary!!👍🏻👍🏻

[@garyparker2969]

You're Welcome.

[@dougherold2545]

well, I have been meaning to buy this model for a while but have just put if off until now and went over to the site and hobbynutmodels is sold out. bummer. I will keep checking. looks great. What did you clear it with?

[@modelcarvideos5829]

I didn't clear this one since the gloss is so good but usually I use Pledge floor polish.

[@victormartinez5256]

Hobby loby

[@moparnut6286]

I'm with you I build sub assemblies and paint as I go...is this GTX kit the same as the 90s version or did revell do any updating to it. If you use a sharpie to mark mold the lines makes them easier to see like guide coat is used in the 1 to 1 world on cars.

[@modelcarvideos5829]

Not sure if it's the same as the 90's kit.

[@adriankaill9413]

Us Brits would call that colour Primrose Yellow...nice 👌 and for you Americans who use Baby English...note the correct way of spelling colour...I thank you 😊

[@modelcarvideos5829]

Lol!! Thanks!

[@samuelvasquez8170]

How does the egg incubator work? Not to hot?

[@modelcarvideos5829]

No, can set the temperature. It works great