1970 Datsun 521 With Fitech Fuel Injection

[@danbasta3677]

I fell in love with the looks, the style and the design of the 521 series Datsun truck. Wish they were still being made today.

[@danbasta3677]

Wish I could have gotten a little 521 series truck like this when I was living in Murfreesboro Tennessee. I could have really used it. These little trucks were the very best little trucks you could ever have had, I always loved Datsun/Nissan trucks from back at that time, they ran so well and ran that great.

[@davidnguyen7281]

I just purchased my 2nd Datsun 521 truck after I so,d my Datsun 620 and this video gave me some inspiration for future build . I like my 1970 Datsun 521 for I would never have to smog it & swap any engine I want later

[@letsgowoodwork2272]

Nice truck. You have to appreciate the simplicity in the old trucks.

[@donnieprinnell4857]

Luv this truck. Had a 70. Wish I never sold it. Great li truck. So cool. God bless.

[@danbasta3677]

To bad these small trucks still can't be built today.

[@frankboyer1490]

Looks great. Love how clean the interior is too.

[@christophersmith7714]

What a gorgeous truck! You have done everything right and it looks like a fun truck to drive. Very impressed. Cheers from UK

[@anthonysinclair5721]

Thanks for the tour! What a great truck! 👍😎

[@whitesnake1439]

Cool ride, had the same truck 35 years ago. Two issues i always hated was the headlight fuse would heat up and blow out. And steering column too lenghty putting wheel in your chest. Slammed mine too. Got a vw caddy pickup now

[@ThePSpack]

Adding the relay to pull power directly from the battery and not through the switch has made the biggest difference.

[@autovice]

Great video! Very informative and your pick up has some impressive gitty up! Thanks for posting it on the FB group page. It gives me motivation to keep working on mine!

[@lucafalck7726]

Nice one ! I build the same car ... lot of work 😉 regards from Poland !

[@josemejia7797]

Q motor le metiste biejon

[@lilyeetmeister6422]

Gorgeous bro, just bought my own beat up lil 521 and been working it nonstop. Seeing this beauty gave me so much inspo for what to do with mine. Again beautiful truck my man

[@danbasta3677]

Keep it stock. Paint the underside of it with black rust olem paint and sand her all down on the body, prime it and get a nice color to paint your little girl. Once done, invest in a paint on bed liner coating to protect the bed from rusting out. These 521 series Datsun trucks are beautiful looking and they run forever as long as you take good care of them and matain them properly.

[@Hknutson1]

Kick ass truck. Just bought a 521. I hope to do a lot of this to it. Great video. Thanks for taking the time.

[@danbasta3677]

There rare. Hardly any on the road these days.

[@dandorris8531]

Nice build, just FYI on your Fitech menu go to DFCO LOW and DFCO HIGH to help with deceleration fuel cut out. This setting will help with the off throttle deceleration popping. The low # which causes high vacuum will cut fuel. High # which causes low vacuum will add fuel. So basically off and then back on throttle.

[@olivercastillo7216]

Dope truck! I thought you were in LA until you said Barrio Logan. I just picked up a 72 1600 today that I found browsing for a truck on Craigslist.

[@los213k]

Dope truck!

[@Cfchild1]

I noticed you're getting some backfire on deceleration, when you downshifted to exit the freeways. Might that not indicate a vacuum leak or lean out on deceleration issue? Very cool truck and nice custom build!

[@arxg1934]

Wow this thing is wicked man, great work

[@lilvato88able]

Looks super fun to drive great video thanks for taking us with you on your burrito run was hoping to hear it driving 🌯keep on trucking 👍

[@johnchambers12]

Nice sound from a great truck, thanks for sharing it !

[@Buddyscreation410]

I just picked up a 1970 datsun 521 last night same color. Needs some work. Going to be a fun project

[@danbasta3677]

If ONLY I could have gotten one of these little 521 series trucks when I was living in Murfreesboro Tennessee. Really would have loved to get one.

[@dexburwell]

Cool ! Found myself replaying the driving (burrito run) scene 14:50 to 20:16 several times 😀

[@longrodlseries]

Pretty Rad! Love the on ramp pulls.

[@pidgeiam4979]

Hey Pete for a future vid could you or mind showing the rest of us how you did those hood lift struts. Just noticed this. I’ve put them on both my Nissan trucks and it’s a great upgrade. Thanks. -Pidge

[@markreynolds3850]

👍cool truck.

[@anthonysinclair5721]

You just can't have fun like that in a new truck! 😎👍 Nice!

[@OscarSegundo]

Miss my 720, I definitely want to snag a 70's truck!

[@bluehandsvideo]

Geez....I can't believe I didn't finish this video when I first started it.....who knows when. lol I had a red line up until just before the shout out about my parts. Thanks!!! It's been a long time since I've done those Z'd LCA's. lol This makes me want to start a "customer rides" page on my site. :) -Mike

[@zacariasblanco9738]

Nicely done

[@erodrod36]

Awesome truck. Working on rebuilding a 71' 521 myself. I see you're local. When is the next meet would love to check her out and bounce some ideas.

[@ThePSpack]

facebook.com/groups/SanDiegoDatsunEnthusiasts/?ref=share. This is the local group that has regular meets every month. The next one is in December.

[@jacksonedward7245]

Excellent video. Thank you

[@spookylibrary]

Awesome truck!!!!!!!

[@muhammadumer8341]

Nice ride

[@davidpcanlas]

Hey man, I gotta come check out the truck next time I'm down there. I'll bring the 620 or the 510

[@ThePSpack]

Come on down!

[@pidgeiam4979]

That is dirty!!! Love that man. I gotta 69’ 521 myself with the slow poke J13, and when I say slow poke it sure is. Your truck gets and up and goes, that’s pretty impressive. Love the stance as well the whole 521 just looks good. Do you have a build page over on Ratsun by chance I could check out? And your running 14” wheels with Mikes kit?.........AWSOME looking 521!!!👍🏼👍🏼👍🏼👍🏼 -Pidge, Ontario Canada.

[@ThePSpack]

Thanks! I’m on ratsun, but I just creeped there. Mostly just used it for information. I have a lot more stuff on the 521 Facebook group.

[@pidgeiam4979]

@@ThePSpack thanks Pete for gettin back. Love it. -Pidge

[@patkelley2190]

Nice but please need more information on all part numbers if possible please.nice job clean . thank you for sharing this video.

[@rudy_ad]

gosh this is perfect, congrats

[@gabacha000]

Amigo que chingona camioneta

[@octaviogutierrez6324]

What transmission brotha ? Beautiful truck i have a 69 myself 👍🏼

[@etch93551]

I want this truck!

[@JeffFadness]

That thing is PROPER!!

[@davidgarcia-zn8qc]

Can you explain how you did the triple gauges and what you did. That is exactly what I wanna do to my truck.

[@danbasta3677]

I wondered about that as those gauges on this truck isn't the original gauges that these trucks had from the dealership.

[@christhomas2282]

Hi my name is Chris I’m in the bay area. Just wondering if you still have your truck very nice looking looking right thinking about purchasing.

[@dye80project]

Perfect..

[@collinlennon1181]

I am in the process of converting my 79 kingcab to efi and want to go this route, the only thing I can't find confidently is the adapter plate, do you have a part number or link for that?

[@ThePSpack]

It was a random part that I found online. I just searched Webber Holley 3200 adapter.

[@snors6689]

Thanks for sharing all your hard work! Can you tell me what you did for exhaust, was it straight piping or did you put in a muffler?

[@ThePSpack]

It has 2” exhaust with a magnaflow.

[@mikepermin517]

what was the mod to the distributor, I have a Pertronix conversion done to my l16, would it work for the fitech kit, or what did you use?

[@iancole3070]

What FItech did you use to fit a Datsun motor? I have a ‘67 520 and trying to convert to a Weber or efi…. Thanks

[@ThePSpack]

Fitech pn 39001

[@ThePSpack]

Fitech p.n. 39001

[@iancole3070]

@@ThePSpack Thanks! What 521 group are ya in on Facebook? You have an IG or anything?

[@ThePSpack]

@@iancole3070 I’m in the 520/521 owners registry on Facebook.

[@MCT15BKK]

I love This car 😍

[@danbasta3677]

It is a beautiful truck, that's for sure. Wish they were still being made today gasoline is on it's way up to 6 dollars a gallon, again. These little 521 series Datsun/Nissan trucks were really great on gasoline savings.

[@randumbjose5101]

A few months ago when I first saw I thought it was a 521 that I bought but it’s very similar. *not anymore

[@danbasta3677]

It is a 521 series Datsun truck.

[@Chewygsxr]

I had a brand new one in 1970, it was my first car, it was Maroon in color, I put 14”/8” wheels on the back with F-70 14” Good Year tires on it, i put 50,000 miles on it in the first year, I could beat 914 Porsches all day with it. I had to trade it in as my 2nd kid was on the way, so I got a 510 Wagon, put 171,000 miles on it, those 1600 Single overhead cam motors were bulletproof.

[@danbasta3677]

Should have kept the truck, and gotten the wagon for the wife to use. When your in your own home there, you could still use the truck to make home improvements and haul things around with it.

[@Chewygsxr]

@@danbasta3677 I did, I got a new 1974 model and gave the wife the wagon, unfortunately after two years a drunk driver hit me head on and totaled it, I'm lucky to be alive.

[@gordonstearns6776]

What kind of gas mileage do you get per gal of gas

[@danbasta3677]

Excellent I would say. Those little 521 series Datsun/Nissan trucks were excellent little trucks to run and own and were great on gasoline savings. Wish they could only come back into production again.

[@minamiminami-j6x]

素晴らしい、いいですね

[@Buddyscreation410]

What disc brake conversion you got?

[@israarroyo9854]

Where did you get the blinds from?

[@ThePSpack]

I picked them up form a local guy who had them made for his truck.

[@eliceovelazquez2004]

Love it

[@trevolutionary3]

Do you have a link for where you bought that coolant outlet with the extra ports? It looks very similar to a 240Z one, but I'm not sure. I have a 77' 620 KingCab and I'd like to go the same route with converting my L20 to EFI. Nice 521, thanks!

[@ThePSpack]

I don’t. I found it on eBay.

[@rockypergin2216]

So cool 😎

[@edgaralfredoaltamiranohern1223]

How to adjust the engine cid value I have a Datsun 521 and I used the same system as you but it won't let me put the correct value 108 is an L18 engine

[@edgaralfredoaltamiranohern1223]

It tells me that the minimum value is 160 and the maximum is 800 and my engine is 108

[@ivanrodriguez3110]

Do i need a different bracket for the maxima alternator , im trying to do what u did since i had to redone all the wire system

[@ThePSpack]

I used the lower bracket from the 521.

[@ivanrodriguez3110]

@@ThePSpack right on thanks

[@garrett6758]

quick question about the blinds in the back window. Are those the units they've got on ebay? My little trucks great in the winter months but I can already tell the desert sun here in NM is gonna be hell through that back window on my neck/ back!

[@ThePSpack]

They’re a custom made set that I got from a guy here in San Diego. They’re great for keeping the sun off.

[@garrett6758]

@@ThePSpack you think he'd be willing to make another set? They look great!!!!

[@ThePSpack]

Unfortunately I don’t have any contact information for the guy.

[@garrett6758]

@@ThePSpack could you, at your convince, hook me up with a few pics of them, how they attach, etc. I may be able to fab up a set. And are you on ratsun at all?

[@ThePSpack]

I’m not on the forum much. I’m in the Facebook group a lot more.

[@jeffreymoffitt4070]

Got a link to the disc break adapter?

[@ThePSpack]

He has since stopped making the adapters. I’d look on Ratsun, or the 521 Facebook group. Someone else is probably making them, or better yet a ball joint conversion.

[@MaikeruX88]

How tall are you? I am 6.2 and I feel like you're siting a little close to the steering wheel for comfortable ride on longer trips. How are the legs after a longer ride?

[@ThePSpack]

I’m 6’2 also. I think I’ve gotten used to the driving position over the years. After really long trips I’m hurting. From San Diego to LA is no problem though.

[@danbasta3677]

The cab space back then was much more longer I truly believe. I to am over 6 ft and currently have a 02 Dodge Dakota regular cab 4 wheel drive truck and I struggle getting into the truck because these manufactures shortened the cab space up so they can make more money selling an extended cab truck or a 4 door station wagon truck which I don't need. A regular cab truck is all I ever wanted and need, nothing more since I don't have a wife or children. Besides, you can haul more with a regular cab truck than you can with those ugly looking 4 door station wagon trucks with wagon wheels and thin tires on them.

[@miggy9260]

@@ThePSpackWould you ever part with her?

[@andrewfallin9132]

Where is that intake?

[@ThePSpack]

www.piercemanifolds.com/CANNON_MANIFOLD_99002_825_p/99002.825.htm

[@carinoe1]

dang didnt realize u were in sd haha

[@johnndlovu3789]

Bring back old cars please

[@danbasta3677]

And these 521 series Datsun/Nissan trucks to. Liked the 620 to. What more would ya need than these little cars and trucks that are fuel efficient and save money on gasoline now that gasoline is going all the way back up over 6 dollars a gallon once again.

[@gusparra4037]

I need one

[@danbasta3677]

Wish Datsun/Nissan would manufacture these little 521 series truck again. This time, have 4 wheel drive package on every one of them when you buy one.

[@danbasta3677]

This is a 521 series. They went from 1965 to 1972 and a half. Then in 1972 and a half, the 620 series was the next designed Datsun truck on the market.

[@olivercastillo7216]

It's actually a 521 (which is a face lifted 520) the original 520 was built from 1965 to 1968 and then the 521 was built until 1972.

[@danbasta3677]

@@olivercastillo7216 I still call them and classify them all a 521 series truck. 420, 520, 521 series, 620, 720, D 21 hardbody series then currently, Frontier Nissan trucks.

[@danbasta3677]

Wish Datsun/Nissan would start manufacturing these 521 series trucks once again with their fuel efficient 4 cylinder engines in them. Gasoline is going back up to over 6 dollars a gallon, again. We need these small cars and trucks once again back on the roads, and fuel efficient vehicles again, not these 4 door station wagon trucks with wagon wheels and thin tires on them, which are gas guzzlers and are hard to manover around and drive. These smaller trcks and cars with 4 cylinder engines are all ya need.

[@terryharcrow7593]

I want a 1964 320 datsun truck simple as is ! Thankyou..