1970 F100 RESCUED from backyard now DAILY DRIVER. DJM install and shining her up!

Use PROMO CODE. PFS64 at checkout while visiting sweetpatina.com
Here we go with a fun little 2 day turn around on Taylors truck. We installed a 3/4 lowering kit from DJM and shined her up with some patina sauce from sweetpatina!
Shes looking good!
Subscribe!
instagram @puddinsfabshop

[@MortskeRepair]

With a molestache like that you definitely gotta keep the stabbin cabin on the back!!!

[@PuddinsFabShop]

😂😂😂

[@oldgeezer3269]

whatchadoing here Mortske you come to see if he wearing bibs or what ever ya call em in your country

[@PuddinsFabShop]

Bibs for life!

[@oldgeezer3269]

@@PuddinsFabShop Dungaree's in the UK I think they're posh Bibs

[@MortskeRepair]

@@PuddinsFabShop So many pockets for sammiches!

[@oldpolak5203]

Up in Canada where there is two feet of snow , we lift our trucks . You guys work good together , no cussing. I like the camper look .

[@PuddinsFabShop]

That’s the magic of editing! Lol

[@oldpolak5203]

@@PuddinsFabShop I figured that . I got special names for every part on my truck that gives me a problem.

[@anthonybarron3157]

Love watching Puddins Fab Shop he is great at what he does and he's funny as crap I'd rather watch this show more than anything

[@scottypetty9117]

Found some old content love these old f100s..

[@SchysCraftCo.]

Very beautiful. Love seeing older trucks still on the road. When cars and trucks did not look the same. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep making. God bless.

[@pugliesesspeedshop]

I dig the old school camper shell on the long bed!! Goes well with the timeless slot wheels...

[@PuddinsFabShop]

No argument here. 👍🏻👍🏻

[@RustyIronProjectsRIP]

Looking good, you can't beat those old ford pickups. I have several my favorite is the 3/4 ton 4x4 highboy 4 speed . 410 gears with the 300 in line six. A true work horse.

[@PuddinsFabShop]

That’s cool!

[@beardedscrapper538]

Looks good. I like the cap on the back. Makes the truck look better in my opinion.

[@alanwilliamson9350]

Cool ole truck! Kinda reminds of a ford version of farmtruck with the camper on it. I'd leave'er on!!

[@PuddinsFabShop]

Thanks! I see what ya mean!

[@Voongi]

Great video, What a cool truck its so clean. Its nice to see a F series truck being modded thanks for that. Vehicles seem to age very well out by you I'm jealous.

[@PuddinsFabShop]

Some do well and some not so much! Thanks for watching as always!

[@nitcat1]

Bumpside FTW! I have not seen a DJM installation on an older F100, great to see this.

[@PuddinsFabShop]

Sweet! Glad you enjoyed it! I like a bump!

[@c7d3p]

Nice Ford! I did the same drop beams on my 65 F100. Swapped in 73 f100 front disc brakes at the same time. Flipped my front leaf spring bracket in the rear for the drop. Had to shim it too.

[@PuddinsFabShop]

Heck ya! I like the 65s!

[@nujayfabrication8089]

Love the paw paw style truck lowered . love the camper shell .

[@PuddinsFabShop]

Me too!

[@butchaus8315]

great video. Brings back memories of my white 69 Ford 3/4 camper special.

[@davidgarcia834]

Lookin sweet, you gotta keep the creeper cabin in the back.

[@davida.p.9911]

Long live the classics! Looks real good! 😎 I vote for leaving the camper on.☑

[@PuddinsFabShop]

👊🏻 yes sir! It will stay!

[@rayphillips332]

You learned something when you did that job. But you did really good for a young feller.

[@PuddinsFabShop]

Thanks

[@Mach1bud]

Hey man, this ended up being a pretty great video. It's June 2022 and this is exactly the video I needed. About to put drop beams on my '78. Thanks for the multiple screens showing the kingpin reamer I'll need.

[@racer67]

Love them old camper style bed caps! I had a 67 ford ranger with a similar cap years ago. Awsome!

[@williamsnyder9103]

For future reference they make king pin kits with nylon bushings...no reaming required..as for the rear bushings I found that if you drill out the rubber the bushing case is much easier to remove

[@PuddinsFabShop]

Cool!

[@jasongrigsby2017]

I am loving all the Fords lately! I daily my 69 f350. Your buddy has good taste.

[@PuddinsFabShop]

I’ve been around more fords in the last month then in the last forever!

[@stevelangston2359]

Cool people always hang out with cool friends!

[@PuddinsFabShop]

Sure do!

[@rayphillips332]

I like the caper shell if you've got something to move and its raining it won't get wet.

[@PuddinsFabShop]

👍🏻👍🏻

[@johnburch6927]

Been looking at these axles and hangers. Looks pretty nice. Sure prefer this over other options.

[@Industrialseven2000]

Awesome 👍🏼. I had a slammed 59 f100 and a 63 f100.. I regret selling them. Now I’m building an 85 with DJM parts under it too!

[@PuddinsFabShop]

Heck ya! Sweet rigs 👊🏻👊🏻

[@ddgatewood71]

If I had friends like you around here life would be a lot cooler.

[@PuddinsFabShop]

Maybe lol I hardly see my friends! I’m too busy haha

[@davemclaughlin8646]

There is a Classic saying in Queensland Australia," There is always two people, with lots of friends,=1- Motor Mechanics &2- people with homes at the Beach!

[@ddgatewood71]

@@davemclaughlin8646 😂😂 It's true :) I'm the guy that fixes stuff. No beach house :(

[@davemclaughlin8646]

@@ddgatewood71,I unfortunately had a house right on the beach at Scarborough, Redcliffe,just north of Brisbane Queensland, with a mechanical workshop just down the road,for 12 yrs,so had a continuous line of visitors, desiring boating/ fishing adventures in my boat, naturally at my expense,or cars, trucks,boats, Tractors, Motorcycles,etc.needing repairs?

[@ddgatewood71]

@@davemclaughlin8646 That sounds about right. It's unfortunate that some people can't just be your friend for no other reason. I'm a computer tech so I'm constantly being asked to fix every phone, computer etc for free. Free because "I like it so it's not really work" lol crazy people

[@kevincorbin6273]

Puddin is finding his groove in this video, and now we have the celebrity known as Puddin, thanks for sharing your journey

[@Fatspurios]

Sweet truck. Be well and stay safe.

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@omentep]

Such a well maintained truck, I can only hope to find and afford one like this someday.

[@WWS2]

Them slot mags look great on that ol girl. Clean lowering. Beaut!

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@raywilson800]

Camper. Sweet Patina Sauce really brought it out. Great Video. Quiet different from the Puddins Video of present day.

[@richardd5477]

The coolest part about this channel is the fact that you’re from oklahoma too i’m only like an hour away, doesn’t seem like i’ve ever watched a youtube channel from oklahoma besides that kent rollins guy, anyway you’re badass dude. 580 gang.

[@PuddinsFabShop]

Thanks Richard! I’m not sure of any other KZbinrs from Oklahoma BUT I don’t have a lot of free time to search for others.

[@richardd5477]

@@PuddinsFabShop Kent Rollins or rollings whatever his name is is, but he’s a cooking channel he runs a cowboy kitchen!

[@PuddinsFabShop]

Oh that feller! He’s awesome!

[@garyjacques5982]

Yeah I dig that look man I had an old 69 F100 had a camper topper on it . There's running a 360 with a top load of four speed. Kind of wish I still had that old truck laying around. The last one I had I never bought it down from Ohio I had a another 69 F100 8-ft stepside all the original straight six three on the tree that's the one I wish I would have kept and bought down to Texas and worked on it.

[@PuddinsFabShop]

A couple of good ones there!

[@lochnessfox3441]

You’re getting better buddy. No camper. Just a tonneau cover. Have a great one!

[@PuddinsFabShop]

👍🏻

[@deanhicks4983]

Great video! ...The camper is perfect🤘🏼

[@PuddinsFabShop]

👊🏻👊🏻👊🏻🔥🔥🔥

[@greg6895]

Nice patina....If it was my truck l would remove the camper shell. Thanks for the vids, l always enjoy watching them.👍👍

[@PuddinsFabShop]

It’s sweet patina! Thanks for watching the videos!

[@greg6895]

@@PuddinsFabShop Sweet!

[@LeftForDeadGarage]

I feel like those slot mags are a must on Ford pickups.

[@PuddinsFabShop]

👍🏻👍🏻👍🏻I agree

[@TheDieselStop]

Awesome truck. I have a 67 f100 that I keep saying one day I’ll get to it. Awesome video.

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@Wingnut_Stickman]

You guys sure make that look easy! I say leave the kill room/crime scene/camper cabin as it is. That's one of those "as soon as I took it off I realized how much I used it but then I lost some of the hardware and cracked something when I took it off and the darned box was being held square by the thing anyway and who guessed the original colour was red and now it's going down the road crookeder than pick one (a three-legged dog, a Lowes 12' 2x2, Ducati exhaust pipe, Mulholland Drive)" sort of deals. Thanks for sharing!

[@aircraftmech.312]

Without the camper shell! Looks great!

[@PuddinsFabShop]

👊🏻👊🏻👍🏻👍🏻👍🏻 I still like both!

[@jeffrey4547]

i picked up a ranger xlt with tool box on side high boy with dana 60/80 lockers about the same condition only no surface rust and full chrome trim and a 390 in it not stock engine for 250 bucks then i got a 70 motor home with a bunch of parts that they never put on a high boy like tach in dash tilt wheel power steering power breaks wiper delay cruise control rose etched interior trim got it free with a bad c-6 trans but with a running 428 so far everything will bolt right on

[@TheThirdWheel618]

I want to see it with the camper shell and a canoe bolted on top and a old acoustic guitar on one side and a banjo on the other...nice vid truck looks nice i did the 3" DJM kit up front on my 69 F250 8 lug and used AC delco 75-89 C20 coil spring up front bolted right in its about a 4.5 " drop up front although DJM did not sponsor my build lucky you ....

[@Jeff-1969]

My grandpa was called peepaw and my grandmother was Nanaw 😏👍 I was raised by my grandparents love them very dearly.

[@dolinick]

i love 67-72 f100 trucks but the 1967 is the best. i have a 1968 f500 and a 1979 GMC 3/4 ton and a 1983 f100 and a 2003 f250 7.3L diesel crew, long bed, 6 speed manual. all my trucks are manual. 4 speed, 4 speed, 3 speed and six speed respectively. ;)

[@farmerbrown3768]

Oh man……. I was really waiting to see the pin striping! Cool lookin ride anyway.

[@RODDER-hq2tr]

Great looking truck not a Ford guy but she’s pretty sharp love the aluminum slots 👍🏻

[@PuddinsFabShop]

Me too!!

[@ewartbuilt660]

That's a nice truck. I bet it rides much smoother removing a few leaves from the rear. I'd like to see it without the shell.

[@charliesmith6098]

Send that camper shell back to the McGee 45. Thanks for the video!

[@PuddinsFabShop]

I’m gonna let you tell Taylor that Charlie!

[@davidcooper3337]

Awesome content , keep the camper shell, makes it sleek and low.

[@PuddinsFabShop]

👍🏻

[@gp500fan]

That truck is a beauty! As a new subscriber to your channel, I'm really enjoying the content!!

[@PuddinsFabShop]

Awesome, thanks for subscribing Richard!

[@soloindustries1260]

Yall got some sweet rides out there.

[@shanewright6958]

It turned out good for a Ford 👍👍🇨🇱 Another great video 👍👍🇨🇱

[@PuddinsFabShop]

Thanks Shane!!

[@adamfredrickson8681]

Seeing old video makes me wanna give up the p.b.r. beers as well

[@walterarmijo5668]

lmfao king pins! and the reamer! i took it to a place that does semi truck king pins :o but i totally get fighting with them!

[@PuddinsFabShop]

Yep I should of looked into it. Makes sense after getting into the situation but a lesson learned for sure!

[@glenhynes3593]

Amazing put steelies on it and that’s it keep the topper 100%

[@mechanicmike1236]

cool ol’ Ford!! I’d like to see it without the topper, Taylor might like it without it on there, but in the end it’s his truck. Take care and no legs under the car without jack stands, lol!!

[@PuddinsFabShop]

There’s jackstands!

[@Brazzbalzk]

Honestly I love this truck

[@TheBigJuicy]

Cruise it with it off. I'd like see more projects like these and continue with the classic Fords.

[@phoebejustice9797]

What a cool truck

[@PuddinsFabShop]

It is

[@michaelgargone4480]

Great job guys learned a lot thanks 👍

[@PuddinsFabShop]

Thanks for watching!

[@Radmutter911]

Keep them videos commin' Puddin'! You're growing like a wildwood weed! Seriously though, wishing you great success in the new year, and thanks for the entertainment!

[@PuddinsFabShop]

Thanks Jon! More adventures to come!

[@rayphillips332]

This was very interesting never had to do this but if I did you really helped me out so know I know how to do it very good job

[@PuddinsFabShop]

👊🏻

[@johnp1966]

nice truck! i'm building my 71 f100 as a daily right now.

[@PuddinsFabShop]

Heck ya!

[@jamesmaness6308]

I've just recently found you here on YT, so I've been playing catch up watching some of these older videos too. I like how your personality has evolved, but your work ethic has remainedthe same. Seems like you're having a lot more fun nowadays. Blessings to you and yours

[@Jay-lc1nh]

A walkthrough is as good as the next. When a guy hasn't done the work like me an explanation works to. The rest is just turning wrench. 👍

[@theodoredugranrut8201]

Nice truck, Good point on king pin honing Central California Watching

[@PuddinsFabShop]

Thanks for watching!!

[@CoastalAutoReactionCAR]

Sweet old bump side!

[@PuddinsFabShop]

Thanks Coastal! It’s a neat daily

[@CoastalAutoReactionCAR]

@@PuddinsFabShop I love old Daily Driven Long Box Trucks!

[@PuddinsFabShop]

I can tell!

[@tallboy2234]

Good Looking Truck! 👌😁

[@PuddinsFabShop]

👊🏻 thanks!

[@terrylewis1239]

Not a Ford guy, but it's look'n good. Don't mind the cap, after all it's his truck.

[@PuddinsFabShop]

I’m liking it!

[@tallboy2234]

Like the Cap!👌😁

[@davidwood1923]

Thanks for Sharing... Brother

[@ramirogonzalez7635]

Great job looks awesome!

[@christophergreen2328]

Nice looking ole ford.

[@ddblairco]

that DJM stuff looks great

[@JerryAtricMr]

New Video! Yes! Keep us posted on when we can purchase merch. Help my Okie neighbor out for all he does for us... thank you!

[@PuddinsFabShop]

Will do! Thanks for watching and I’m just having a hard time choosing a supplier because I want good quality stuff!

[@BarnSharks]

good job on these videos! Wish I could pump them out .

[@PuddinsFabShop]

Thanks!! I wish I could get more out myself!

[@panheadric]

enjoy your videos & like that body style of ford ,my pops had a green 69 f100 but you should never pinch the brake lines with vise grips it can break the inner liner & cords , causing it to leak or not function correctly .

[@PuddinsFabShop]

Thanks 👍🏻

[@rantsfromtheroad2055]

once again Ford = views. Good video, especially since I own a 1968 F100 that needs a lowering kit. DJM has the most reasonable price I've seen for a lowering kit.

[@PuddinsFabShop]

This video is down on views sir since the growing of the channel. I’m ready to see how my video I’ll post two weeks from now does. Hint. It’s not a ford.

[@JVaughn344]

Looks good.. awesome job... 👍👍

[@PuddinsFabShop]

Thanks! 👊🏻👊🏻

[@frankm8533]

Looks good I like the cap to

[@PuddinsFabShop]

👍🏻👍🏻👍🏻 I’m still 50/50!

[@dopeynightlifetv6859]

She l looks pretty good even without the camper shell on it 💪

[@PuddinsFabShop]

👊🏻👊🏻👊🏻👊🏻 I agree!

[@FoxBodyDale]

Hellyea puddin and dont take that shell off its perfect

[@PuddinsFabShop]

👍🏻👍🏻👍🏻

[@smokewagon2625]

Right there is my dream truck done right.

[@roblukowicz5050]

Not a ford guy but she lookssss good keep em coming puddin great vids 💪💪💪

[@PuddinsFabShop]

Will do!

[@davemclaughlin8646]

G'DAY PUDDIN, nothing beats having a dry mattress & SWAG,to climb into,after a hard day hunting,ROO shooting,PIG hunting, Fishing or Mud Crabbing,plus doing bedroom acrobatics out on the ground,is OKAY, when you're young and foolish,but as one ages,you find that if your standard is desiring the classier gals,they choose to go with the fellows with dry,clean 8" foam mattress and SWAG, rather than thrown into F100 hood( Bonnett)? So I'm with you PUDDIN, keep your tools safe & dry, and a warm and comfortable bed 24/7, as always, Kindest Regards, Dave McLaughlin Queensland Australia

[@tirejockey806]

Looks good, like the camper on there! But would like to see it without for a comparison.

[@bradleysmith3963]

I love that truck, and I’m not a Ford truck guy

[@sudd2685]

Great video thank you

[@PuddinsFabShop]

Thank you!

[@josephprentice8354]

Hey puddin he still have the stock suspension in your yard 😉

[@Strawdog]

Thanks Puddin got DJM saved to my computer

[@PuddinsFabShop]

Good deal! 👍🏻

[@zeitlerusmc]

Not a fan of ford’s but those are the second best wheels he could of put on it looks good! Best would of been steelies with caps.

[@allanzehnder5068]

Hey there pudding I came across something yesterday. That I thought was cool now I already knew General Motors made refrigerators but I didn’t know I H made window air conditioning. If you are interested in seeing it send me a link and I’ll send pictures

[@XCHANGEDAVE]

Great job looks better

[@chasbarnes3425]

Ima Chevy guy I gotta 85 shortbed shit box but I do like them years of Ford trucks .. my opinion is like to see it turned into a shortbed w/o the topper

[@PuddinsFabShop]

I really like that idea myself. It’d look mean. Also 1” lower in the front

[@paintgunexpress1949]

HERE WE GO...WHOOOOOOO 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥💥👊😎

[@PuddinsFabShop]

🔥🔥👊🏻👊🏻👊🏻👊🏻👊🏻

[@punkinsgarageandpaint8299]

I love the camper top..leave it

[@PuddinsFabShop]

👍🏻👍🏻👍🏻

[@jesseduke694]

Nice truck. Without camper

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@codybaker502]

ive probably watched this video 100 times

[@kwikslvr73]

great project....NO shell!

[@PuddinsFabShop]

👍🏻👍🏻

[@WrongwayMotorsports]

You need to try out Flood Penetrol! I’d be interested in hearing your opinion

[@pekoe1111]

Saw you applied Patina Sauce to the stainless trim, but Sweet Patina says to avoid the trim. What do you think?

[@PuddinsFabShop]

I avoided on my stuff. My buddy who owns this truck slicked it up with it. No complaints yet. I’d do what the manufacturer says.