1970 Plymouth AAR 'Cuda for sale with test drive, driving sounds, and walk through video

www.flemingsul...
1970 PLYMOUTH AAR 'CUDA
• 1 of only 2,724 built ( how many are left?)
• Professional Rotisserie Restoration (look under this car !) of this Genuine “A53” coded Trans Am 'Cuda
• Correct 340 special T/A block with 3X2bbl carbs “SIX PACK”
• Heavy Duty 727 Torqueflite Automatic transmission
• HD 8 ¾ rear w/ Sure Grip (Posi) @ 3.55 gears
• Mirror finish, correct coded hi impact “FJ5” code
Limelight Green paint w/ Black Trans Am stripe & AAR Callouts, professionally show waxed & detailed
• Correct Fiberglas T/A fresh air hood
• Front & Rear Spoilers
• New Black Bucket Seat Interior with Factory Console
• All new Door Panels, Carpet and Headliner
• Factory woodgrain interior trim
• Factory Dash with full array of gauges including 120MPH Speedo, Fuel, Temp and Alternator
• Original 'Cuda 3-spoke, woodgrain steering wheel
• Show ready Detailed engine compartment with correct hose clamps
• Show ready painted trunk with correct space saver spare tire, inflator and correct mat
• Optional Fast Ratio Power Steering
• Power Disc Brakes
• Factory 15” rally wheels with period correct Goodyear Polyglas tires
• Great sounding Side-exit dual exhaust system
• Loaded with Documentation including both fender tags, Original Chrysler Broadcast Sheet, etc, etc!
• It may be the only one in the world like this, Show or drive this Ultra-rare, Investment Grade, Collector Quality, '70 AAR 'Cuda
301.816.1000
www.flemingsult...

[@patsellars5658]

Beautiful! it doesn't get any better than that. thanks for showing us these amazing cars. Pat. UK.

[@aarmancuda3570]

yes it does..having a 4 speed instead of an auto would be perfect..

[@patsellars5658]

Yes your probably right but me being a retired truck driver, after 1.4 million miles driving manuals an auto would be nice lol!

[@goodfella573]

'Who pulls hood pins off a Prius?' lol He has a very good point!

[@kevinpatrick8788]

what a gorgeous aar cuda . my late uncle owned an aar cuda that he bought in 1973 . it was hemi orange with black vinyl roof and had the 727 auto trans . my fondest memory of my uncle was riding in the back of his aar when i was 10 years old and feeling those 3 holleys opening up.

[@PlanetX87]

Test drive?? What test drive? Genius.

[@gevowavemagnet]

These cars were way ahead of their time. Half a century has passed and this 'Cuda does not look the least bit dated.

[@animalyze7120]

I wish they still made cars like this, born in 71 I grew up at the tail end of the Muscle car era and saw these cars daily in various states of condition. What a great time.

[@ziggylothbrook8644]

A total dream car..... doesn't get any better than that

[@mrobertson188]

That's in the top 5 of all time greatest cars

[@stanhutchins6592]

A test drive of this magnificent motor vehicle would’ve been absolutely awesome

[@ziplockdreams4490]

thanks for still making these videos, been watchin you guys since 2010

[@antoineantoine6643]

Woaw! Butiful 'Cuda! I am acctually making an Revell 70 Cuda in this color!

[@lancenorton3747]

I would love to own this beautiful car

[@kurtcole9574]

A friend of mine had one of these back in the 80's, you can tell an original by looking for the tow bars in the front which they came stock from the factory with and the windshield wipers was a option

[@frostyking1319]

Seeing this is amazing and having one is evening better

[@stanhutchins6592]

Test drive would’ve been absolutely awesome

[@jasonrobertson216]

When talking about drum brakes... My old 67 fastback Cuda used to have a non original 318, but did have original 4 wheel drums - was annoying to drive thru a low water bridge and have to readjust the brakes the next day - they moved out when would get partially submerged. Lol

[@FlemingsUltimateGarage]

Thanks for the Info Jason

[@kellienicolebrooksschettin6598]

Yeah the hoods fit that way

[@guitarsword1]

Awesome .

[@kellienicolebrooksschettin6598]

Solid lift cam I forgot nice...I forgot....I have a friend who is one of the best car painters around....and one of his customers had a nice TA challenger redone.....and it was back for some touch up and I asked if I could just start the car not move it....it was freshly rebuilt 6pack 340....I pumped it once waited...second time oh my god I just woke up the dragon what a beautiful sound solid lifter....I slept good for the next week it was so soothing just to hear it I did not know it had a super hot motor from the factory wow it was nothing like a standard 4barrel 340 a 100 more hp is a lot 275hp is stock 340 magnum and a rev if 6 grand too.... Thanks very pretty

[@bultacowally]

NOT solid lifter from factory...just adjustable rocker arms.

[@kubla777]

I lived next to Telegraph Rd. In Detroit. I used to see these a lot. Too bad a lot of them sold in a Rust belt city. People didn’t know what they had back then.

[@tripjet999]

@4:15 - Uh.oh, disconnected hose!

[@paulr1305]

Very nice car Tony I do believe Plymouth named it 6 barrel and Dodge named it 6 pack

[@rookieg]

Beautiful

[@thomasvelazquez9789]

Phil Donahue ah ha ha ah ha ha yeah I watched his tv show!

[@Fmandan77]

I think you meant Mark Donohue, but AWESOME AAR! :)

[@bdogjr7779]

Awesome《☆》I just saw one on Lou Costables channel the other day. The hood bow was a bit more pronounced on it. I figure that the intake seal mating to the hood must be the culprit🤓☻🤠

[@BenDover-cu5fr]

I had one, it's the springs on the hood that make it bow. I took mine off and it flattened right out.

[@SolamenteVees]

I believe all 340s used hydraulic cams/lifters from the factory 8:29

[@dannygoodwin2652]

Yo hey tony what’s the price on this Beautiful car??

[@demetriusbennett7988]

My uncle had a cuda with a six pack

[@edwardchier3154]

Hey Tony ...the Intake manifold is aluminium yes? Per factory its painted orange alao... fyi!

[@kellienicolebrooksschettin6598]

Yeah when I had my 1970 SE challenger I wasn't looking back barracudas any more not even for a dream car that dodge had built that I was building my challenger up to road racing 5 speed small block road racers....I was offered a authentic AAR CUDA with a lot of delete stuff which by today would make it CV even more rare in short the wife was gonna drive it too so floor shift gone also the customer like d the hood it was the flat black they didn't like plus that open gorgeous AAR hood was open to rain not good for every day so a poorly paint ed four barrel hood was installed and that super expensive six pack hood when up in the attic at the dealership 1500 dollars and I passed on it I had 1970 SE Challenger so I wasn't going back to a barracuda no matter what but I didn't know what TAs an AAR s were back then....they were already what I was building on my own my way...I put 255 50 15 BFGs radials on the back an lowered the car I did not know about AAR s having 440 big block suspension already for less body roll....i bought a AAR cuda 727 an installed it myself removing the 3 speed manual boat anchor an I even put the slap stick floor in with a grand coupe shifter in my challenger.....oh my god was that transmission bad ass I could not imagine how mean the whole car would be..... My friend who had the delete car...I was told took non believers out to prove the car really was a AAR CUDA an when the occupants came back they were white and new underwear on.....hah hah....shall I hang around for the price or just start crying now

[@bultacowally]

No... AAR's nor T/A's did not have big block suspension. They had the .940 Dia. Small block torsion bars and special re-arched rear leaf springs specifically designed for the T/A and AAR. And believe it or not the 3 speed manual trans you referred to as a "boat anchor" was a very little known 340 go fast part recommended by Chrysler Corp. themselves back in the day...Suppose to have been the best trans for a 340.

[@kellienicolebrooksschettin6598]

The only thing I found was everyone looks about how the 6 pack carbs were hard to keep tuned all it was that after market linkage was the trick for racers like me but with 410 horsepower u ain't worrying about that....and it has 4:10 posi unit rear end...u ain't got to worry about performance issues with this car....the funny thing is this the model for the formula of today's challenger s in 2009 forwards this has a small block the 340 was called the little hemi 300 hp x heads 410hp in this bad boy....

[@bultacowally]

PLEASE STOP!!!! You keep digging your stupid hole deeper and deeper. 325 HP remember??? POSI is GM term...MOPAR is limited slip...

[@BenDover-cu5fr]

They had more than the 290 as advertised but no where close to 410.

[@randylear8264]

The 3 Holly 2 barrel carbs use the rods to return the secondary carbs. They are vacuum secondary. So no real tuning except to take the solder out of the idle needles to smooth the idle out.

[@kc-6837]

Mopar!

[@kennethc.bishop7090]

It would have been much harder to race Phil's brother, Mark, seeing as how he didn't have a talk show to keep him from practice time on the track.

[@tonypizzutto4163]

How much for the 1970 Cuda

[@Itsd2323]

How did kevin hart survive that crash .........

[@KevinLopez-yl3vp]

Hemi or Magnum?????

[@steveferguson6809]

Don't lift the hood like that you will crack the fibreglass Grab it from the corner of the hood scoop

[@vipermuscle440]

That car should have 14s in the front 15s in the rear. Not 15s all the way around

[@kellienicolebrooksschettin6598]

Yeah the build numbers on TAs AAR CUDAS was mandatory 8000 each cudas and 8000 challenger s split half automatic s and half 4 speed cars that was what I heard but may be they actually built less but yes SUBLIME....SORRY a Limelight green car there was probably only a few that would make this factory colored one more rare.....I dont know of the TAs AAR s cudas did dodge not build the numbers I was told...either way this is a bad boy original people dont realize how much authentic race upgrade s are worth from a performance stand point race motors just do everything better when it comes to driving....nice thing was dodge had looks and paint that was ahead of its time.....

[@bultacowally]

OMG you are STILL AT IT!!!!!! MANDATORY build number was 500. Total AAR's...2724 were built. T/A Challenger not as sure somewhere around 2400. Certainly wasn't a 50/50 split on the auto/manual trans thing either. You are like 0 for 10 here...give it up!!! Hey Forest you stupid or somethin'???

[@kellienicolebrooksschettin6598]

Yeah the 6 pack 340 is 410 hp

[@bultacowally]

Where the hell you getting your AAR info??? Freaking facebook ??????????? Rated 290 from the factory but were actually around 325.

[@BenDover-cu5fr]

No it isn't. you could get a 4:10 rear gear.

[@kellienicolebrooksschettin6598]

One of the reason I like the AAR over my beloved TA is I like the cudas stripes better over my beloved challenger s......I'm not sure when dodge raced TRANS AM I believe the race team only ran cudas challenger's were only 137 pounds heavier and a couple of inches longer wheel base may be two inches over the cudas .....thanks I think my eyes are hurt from the sun just kidding

[@bultacowally]

What year are the T/A Challengers and the AAR 'cudas??? 1970 right??? So that would make it the year that Dodge and Plymouth raced factory Trans Am. Next you will tell us all Richard Petty drove the MOPAR Trans Am cars...and once again you would be WRONG. Not doing to good with your MOPAR Trans Am knowledge...

[@kellienicolebrooksschettin6598]

You know key buzzer was nothing like today's annoying bongs....plus its turn its self off.....one thing I miss was my challenger's courtesy lights soft light green glowing door key holes key on the Column lit up once u were in just enuf so u could find ignition key hole....and then after 30 seconds or so they faded off perfect not like today's disrespectful car builders.....Chrysler was into making cool an tinted glass for AC equipment cars.....

[@bultacowally]

PLEASE be done.......

[@jackflackatari]

Automatic ??? Epic Fail

[@gshock3092]

Phil Donahue? Wtf