1971 Boston Whaler 13 Restoration - part 8 - fairing the inside

As an amazon influencer i receive commissions for all products sold through affiliate links.
this helps me continue to bring you quality content. 1971 Boston Whaler 13 restoration. this episode we finish patching the holes and fair the entire inside of the hull. we can see the light at the ens of the tunnel.
BUY sun cure laminating resin here: amzn.to/3vj3tlH
Buy PVA Here : amzn.to/47lKi85
Buy drain tubes here: 3 inch: amzn.to/3u0ogKo 6 inch: amzn.to/3Hodu3Q
Buy flare tool here: amzn.to/3HpPGfS

[@DaltonOB]

PVA worked like charm!! Spent 3 hours sanding down the fairing without the PVA, it was miserable (only on a 5 foot section). I've literally replicated your entire process for my first restoration on the 17 lol... Month later from my last comment, sanding fairing tomorrow.. Still gotta figure out how im going to flip the damn thing, im limited on space but should be ready to prime the top this weekend... Should have flipped it first, but doing it a** backwards..Just wanted to say thanks.

[@StoneBrokeAdventure]

im glad it worked out for u

[@curtistaylor2247]

Good job

[@StoneBrokeAdventure]

check out the entire build in my playlists

[@SuperJlonergan]

i said to use great stuff in previous vid...same reasoning...for that little amount why buy expensive two part foam

[@DaltonOB]

Any grit recommendations? From start, to fairing, to primer?

[@StoneBrokeAdventure]

60 to knock down heavy stuff (if needed) 80 grit before primer 220 grit before paint

[@besearchingforwisdom6267]

Did you use epoxy fairing compound on it? and are you going to gelcoat or paint?

[@StoneBrokeAdventure]

i used polyester fairing toped off with pva to fully cure. prime with epoxy barrier coat prime and painting with 2 part polyurethane. check out the entire play list

[@rafunks]

What is the fairing compound for?

[@StoneBrokeAdventure]

its like bondo. it fills in imperfections small dents dings cracks depressions. it is not structural just a finish layer to make things smooth. easy to sand also.

[@rafunks]

Thank you my friend looking forward on seeing the final result! @@StoneBrokeAdventure