1973 Ford F250 3208 CAT

[@Joekool300]

My hat goes off to whoever put this project together... Looks and sounds awesome 🙆!!!

[@Gilmore304]

Thank you sir, wish she was still around.

[@nyshortline]

Amazing how a 636 cubic inch diesel was shoehorned into that truck. Well-done!! I'd love to drive that truck!!

[@krsmfield9334]

nyshortline well we know the batteries were moved and I'd say the firewall and inner fenders were modified too

[@damny0utoobe]

My father used to modify old trucks like this. He had a 465 CI diesel in a 1 ton truck. Fond memories!

[@samuelmota1372]

Not a Ford guy but major props for putting the Cat in a pick up truck.

[@lindenjohnson1515]

I had a 3208N in an 81 LT 8000, great lil engine. I pulled many 80,000 lb loads w/her. amazing on fuel. Congrats, u will love this combo!

[@Noah12343]

When the audio turns into mush. You know it's mean

[@NotSoCrazyNinja]

WHAAT??

[@thewhitedemon0761]

That means it’s a bad mama jama

[@brianengineering9001]

It's bad ass, only one problem, the front bumper isn't big enough.

[@adrianmurphy8927]

It's not a bumper it's a prius collection shelf

[@rednecktim3275]

@@adrianmurphy8927 haha, true

[@tylerpripps4969]

@@adrianmurphy8927 As a Prius owner, I approve this message.

[@Steve.Vaught]

Looks stupid

[@McClellan71]

@@Steve.Vaught Stupid comment.

[@jmurphy1973]

Thank you for not playing Big Rig Trucker and running the pipes up through the bed.

[@derricksarazin6582]

Stacks

[@towtruckmafia]

@@derricksarazin6582 Yeah, stupid waste of bed space.

[@Billy-gh9ih]

Dwayne Mattson if i did stacks it would be through the side

[@screamingreaper6054]

Stacks only look good on a dually anyway.

[@Harley365]

I dont have to play it. I have stacks on my 7.3 but I am a trucker so I qualify for the category

[@charlesnash2748]

I put a 4-53 Detroit diesel and an 8 speed trans in an F-250 4x4 in 1982. Worked great.

[@strattuner]

bought a gmc topkick pulled the lid forward and low and behold it had a brand new 3208 sitting in it,it even had new exhaust manifolds on it,and it sounds new too

[@f-j-Services]

Can't beat that! Not too high, proper nice fat tires for it, great bumper, awesome exhaust! Great truck in general! Would be cool if a 3408 could fit... lol

[@TrumpAlwaysWins.]

I could probably find a way to stuff a 3408 in one

[@f-j-Services]

@@TrumpAlwaysWins. Maybe in the bed ha. Nah a DT466 fits and is way more capable than a 3208. Couple people out there have DT466 swapped their pickups, from OBS up to 6.4s.

[@TrumpAlwaysWins.]

@@f-j-Services I’m actually surprised that you responded to my comment! You commented over seven years ago

[@TrumpAlwaysWins.]

@@f-j-Services what is better? Cat 3408 or DT466?

[@f-j-Services]

@@TrumpAlwaysWins. A DT466, a 3408 is fantastic big engine, but a DT466 is very well known for reliability and capability of power. The P-pumped DT466s are the best, rotary pumped 400 series are still fantastic from 70s from the tractors and early trucks, but the P-pumped DT466, think of a 5.9 cummins and its reputation, a DT466 outdoes it in EVERY SINGLE WAY. People who swear by 5.9 don't know a DT466. The aftermarket is there, the capability is far greater than some measly weasly 5.9

[@iyot1020]

this truck can probably tow a planet

[@ryaneldredpa]

You sir have made my mind up for the next build I am planning. 78 or 79 f250 crew with the 3208 caterpillar marine version engine. Thanks for giving a good perspective and inside look.

[@pookieone631]

ryaneldredpa So did u build it..., upload a vid..!

[@roymartin4771]

when ford quit with the 7.3 this is what they shouldve done.

[@wolfgrizzer]

My ford 7.3 died at 318K 1 qt per 10 miles, maybe had 180hp.

[@dakotaswanson5488]

Well those 318,000 miles must have been pure abuse because my 7.3 powerstroke has 236k and has zero problems and over 250hp from the factory

[@Danimaljmartin]

Same here but mines pushing 400k

[@dannymed8186]

My 1995 7.3 has 325k miles on it and I never had any issues with it. Still going tough💪and doesnt seem like it would slow down anytime soon.

[@richfarfugnuven6308]

My 02 7.3L is relatively low miles. I have upped it to about 450hp. Transmission is holding for now, but when it goes 6 speed allison is next.

[@MFKR696]

I love me some CAT V8s. They're the best sounding V8s out there as far as I'm concerned. Hearing an un-piped 3408 roar to life with an air-start and then just go "wubwubwubwub" like a dragster from hell is the closest thing to a religious experience I've ever had. Those 32s sound pretty damn good too, though. Not as good as a 34, but then again, a 34 probably weighs more than that whole truck lol.

[@GaryLX870D]

Dream pickup.!! This is what my 76_ (with low pinion 44, divorce 205, and round head light's) needs asap. Nice ride. Respect for the old GroundHogs on 16.5

[@boataxe4605]

I once had a boat with twin 3208's, from the time it was brand new I had to add one and a half to two quarts of oil every 12 hours of running time.

[@jfubele]

All I can say is "WOW"! I put a 2007 Cummins 5.9 in a 2006 Ford F250. That's a great job and I know it had to much more difficult than mine.

[@patloughner999]

Absolutely, that has got to be one of the coolest things I've ever seen!!!!!!!!!! Excellent job Sir !!!! I love it!! I watched this video 20 times and each time I am more amazed. I just wonder how is it on fuel?????

[@turbodiesel4709]

Likely terrible. If like most any other medium duty diesel, it should get somewhere around 6 mpg or so. It also depends a lot on what gearing the truck's axles have as well. So, it may get up around 10 to 12 mpg, but that's being awful optimistic.

[@maxlown363]

I had an international flat bed with the 3116 that got 10

[@dr.stonestomper50montana33]

Damn nice build, got to love the older square body fords. Looks great, sounds great.

[@quagshred]

No ford was ever called a squarebody

[@9076723311]

it wouldn't be a KZbin video if someone didn't talk shit in the comment section. Nice build!

[@geraldhenrickson7472]

How true. Some folks cannot help themselves and feel compelled to say something negative. Maybe it was the way they were raised?

[@jamespalmer9556]

fitty6pickemup those batteries are for the motor dumb dumb not the wench

[@timgreen4137]

James Palmer It's called a WINCH. A wench is a servant girl.

[@michaelyoung2565]

Almost a full tank....I’ll take it

[@kathyzeilinga258]

Brian McNeil n

[@663rainmaker]

My cousin had a 68 F-250 2wd with a Perkins 6 cyl turbo diesel and a two speed Road Ranger.out of a dump truck...fit perfectly under the hood....lost of pulling power!

[@super8car]

at first I didnt like the front bumper. Now I believe that its the most practical bumper ive ever seen. nice work. i wanna see it drive!

[@turbodiesel4709]

Agreed 100%.

[@jeremybeckham1828]

super8car ii

[@oby-1607]

Great deer bumper

[@timgreen4137]

That front bumper is definitely purposeful engineering. I would love to squeeze a 3208 into my pickup.

[@Sinister_Reaper]

if i had the money id buy it in a heart beat

[@Wildstar40]

If I had the money I'd build one of my own.

[@bib4211]

​@@Wildstar40 having the time fo put it together is the most important! When building it you can acquire the needed parts bit by bit so can spread the costs over a longer period. But to keep working on it all that time takes durability!

[@anthonythompson4110]

I'm not a Ford fan, but a Cat is a bulletproof engine and this is a well put together truck. I'd drive the hell out of it!

[@toastingtony9104]

i love the amount of earrape when the damn thing started

[@harrisonvc9175]

I would kill for this truck 0.0 absolutely love it 😍 not only is the engine impressive but the body and interior are flawless!! You should make more of these and sell them, I bet you can turn a profit!

[@stevenbaes8228]

I m not a ford guy but that truck looks like it's ready to go and fight ISIS.! LOL.

[@theblindredneck747]

Isis would not know what hit them. LOL

[@theq4602]

They'd go "alluh akbar" and blow it up driving their Toyota hilux. Not even kidding. And I'm a ford guy.

[@CosgroveNotts]

Hi lux anyday for "when they come"!

[@MikeJones-yf2xx]

Steven Baes M60 extra

[@anthonybush3134]

If your not a ford guy then your not American

[@cw4973]

Hey there Mr cat approves, it is in fact a '73 with a '78 grill and headlights and you can tell it is from a few things but the chrome trim on the bottom of rocker panels is one thing and the another is the closed knuckle front axle, Notice the extremely long front driveline...another reason im sure the owner chose this model because of the divorce transfer case. I have owned many of these trucks and i have to say I like this variation with CAT motor.

[@Framlife351]

Great info 👍

[@augustuscantu4935]

I noticed this too. The 73s have a much boxier grille. I own a 72 and when I saw this, I knew something was wrong

[@ricklong3218]

I noticed my favorite truck grille EVER! That's a 78 and 79 only Ford truck grille! 😁😁😁

[@tdmjason]

3208 engine is a damn good diesel . Usually the ones I see fire up in less than a crank

[@Kopjar1]

jet boater that’s also their weak point. The start before they get proper oil pressure and will burn out the two rearmost cylinders. I have lots of equipment with 3208s and have two keys for all of them. Get it cranking for a couple seconds then while cranking then the other key on and boom she’s going. Figured this out after rebuilding a couple of them. Never a problem since with any of them.

[@tdmjason]

@@Kopjar1 good to know Thanks

[@joshmyers4927]

i built one in a 250 in 1980 and ran it 9 years. there was a guy featured in pop mechanics or pop science that was drag racing his 3208 f250. i called him about the oil pan deep end, you just turn the pan around

[@LobbsTrucking]

A pickup with a caterpillar in it!!!! SIGN ME UP

[@RobertValinsky]

I love the sound of those CAT V8 diesel engines. Part of my cdl training for a class B cdl 24 years ago was done with a GMC top kick flat bed truck that had a CAT 3208 V8 diesel.

[@Travis85tville]

Not a big fan of the 3208 motor but it does look good under the hood. I’d drive it! Looks good

[@jnic2003]

Yeah needs a inline 6

[@oltrucksrule]

So cool! Somebody put some time into that build. Love the dash.

[@Robert8455]

Impressive. P/S, P/B, A/C, Cat Diesel, biggest, baddest bumper known to mankind and it's Kalifornia Compliant! Jokes aside, pretty bad ass build, someone put a lot of time into making it fit.

[@dieseldc409]

Man this truck is a dinosaur and I love it!!! Looks awesome especially the interior! Sounds so good too once OP backed from the truck! Sounds better than my 7.3 sighhhhhhhh

[@ValerieprimcessAmanda]

I love this truck, I wish I had one similar to it.

[@toyotasupra8531]

is a beast the king of V8 engine's amazing CAT 3208 beautiful pick up nice work mate

[@bigeleonard]

I don't think you'll find a bumper like this anywhere... a guy that can stuff a V-8 cat in a pickup truck built that bumper

[@lovejcdc]

Absolutely awesome! I would have loved to have been able to do that with my old 95 F250. But only if the 7.3 had been ruined.

[@ScaleCarModels]

Now this is a mans truck!

[@michaelbenoit248]

That poor front suspension with 1200lbs of engine.

[@jnic2003]

Not quite, it's missing a 3rd pedal

[@michaelbenoit248]

@@jnic2003, yess! A truck aint a truck without glow plugs, 3 peddals, & 8 lug wheels.

[@joeshmoe2497]

Awesome truck. Beautiful work. What rpms does she run at 55 mph? Also whats the rear gear ratio? Very nice build.

[@bigal1568]

This is Awesome, who ever built it did a very clean job.

[@Humidor-zl3oe]

Holy snappin, that is a nice truck mate. Well done on the good work.

[@dieseldc409]

Commenting as I watch the video lol. Engine looks awesome like it belonged in that bay! Amazing how you made all that room! Makes me want to do a dt466 transplant but nope mpg would suck in F350!

[@thomasnelson2463]

That took some serious talent, AWESOME truck! Does it have air brakes? I thought I saw a brake chamber under there, and you have an air pressure gauge on the dash. If I had seen the truck when you had it for sale, it would be in MY garage right now!

[@oso_nomada]

My strong running and healthy ‘87 F250 6.9L (IH idi w/ 233,000) is sooooooooo jealous right now. That truck is badass 🤘🏾

[@Briebabcock8052]

Honestly, air brakes and a cat 3208 in a 73 f250, I would have no complaints on driving the truck everyday. Let alone if it had a gutless 12v Cummins.

[@pwarren1010]

The 3208 is used in New Holland combines and probably lots of other applications. Still this is a neat mod job. My hats off to you. What's the air chamber do underneath? Engine must of came out of a truck with air brakes.

[@thecatfelix2988]

Nice job, 3208 CAT. looks like somebody spend some time on that. i know is going to run 7.5 mpg or maybe 8mpg because is a lite truck. The other how is he doing on brakes , stopping power? that is a heavy motor . he had to put some extra leaf springs in front to keep it level .

[@Parents_of_Twins]

Awesome truck. Hate those rubber tees. Darn things always break and then you're left with a broken piece flopping about and trying to find another damn tee. Rest of the truck kicks ass.

[@Cheezeball99999]

IS THIS STILL AVAILABLE???

[@alejandradelpilarpizarroar5423]

Verdaderamente hermoso vehículo norteamericano, saludos cordiales desde la bella ciudad de La Serena en Chile 🇨🇱 ❤

[@demontwashington5388]

The 3208 NA's like this one are loud and not very powerful. Drove a bunch of 3208T's rated at 275HP in a number of flatbeds hauling lumber, and they did pretty well. The turbo added some length to the overall package, though, so it would make it an even tighter fit.

[@JaimeCastillero-c5p]

Existen unos Caterpillar 3208 marinos blancos con un turbo más grande que daaa hasta 435 HP

[@TiagoSC]

That’s a mean kitty pal, nice truck

[@DanTheFordFixer]

I've driven That thing before, used to have a 13 speed spicer and a bed top on it.

[@truckstractorswildlifeguns6648]

Danthefordfixer wish it still had the 13 spd .if it was mine, thats how id prefer it.

[@Thunderchicken69]

Damn, 13 speed in an F-250, that’s badass

[@johnwells7931]

that cat is a industrial engine it will run that truck 1 million miles no sweat of it's nuts !

[@ccryder1149]

Only problem we had with 3208 was that throttle response was so quick that an unloaded truck with a manual transmission would surge with every bump in the road. It was a real pain trying to hold your foot steady. With a decent load, the problem wasn't present. Some people referred to this engine as disposable because it didn't have cylinder sleeves and Cat didn't sell oversize pistons. Two engines ruined by field service personnel (too lazy to properly service air filter) were bored for dry sleeves and rebuilt. Great engine for medium heavy trucks.

[@robby844]

You are kidding right? Every 3208 I have run (brand new, reman, or 100,000 miles) had sluggish response. You can't get ''quick'' response unless it's a souped up marine version.

[@ccryder1149]

robby844 Nope, not kidding. 1977 F7000, with 3208 and RT610 equipped with a Prentice (?) boom and 16 foot flat bed. Even with that load it bucked the throttle until you put something heavy on it.

[@caseycouch1660]

Have a Oliver tractor with 1 in it from factory 126 hp. Put trk heads & small blower on 225hp. . Another 1 serious work done on it 750hp.

[@basketofdeplorables4253]

getting oversized pistons for 3208 never has been a problem, .020 and .040 over both readily available. the disposable engine thing is a myth. you can get parts for 3208 practically at 7-11.

[@johnparrish9215]

If you built this truck, Great Job. If you didn't build it then don't ever sell it since you will never get another one.

[@shane-fp7hq]

Would love to drag a Prius down the road in this.

[@Jean_1999]

Cat Swapped Ford and Detroit Diesel swapped Chevy is all you need in life. Both engines sound badass

[@maj.FrankMBurns]

Detroit diesel is a gm engine

[@fish123832]

You've got one bad pickup there, I like it.

[@Dieseldad6.7]

Starts beautifully. Deffinately a nice job done on this truck

[@reillystsb]

I think it's bad ass is it still for sale

[@jeremyl8989]

john reilly yes

[@donnythomas0078]

Really?? What are you asking?

[@somewhitedude01]

@@donnythomas0078 lol

[@somewhitedude01]

@@jeremyl8989 hahaha

[@caterpillarford3988]

@@donnythomas0078 thats not the owner its sold lol

[@benscott19841]

Now that's a truck son. I'd buy that in a heart beat.

[@Motor-City-Mike]

Don't tell the truck the Cat is too heavy, it hasn't noticed yet.

[@Motor-City-Mike]

James Morfison Wow, nice to hear from you.... I enjoy friendly people.

[@donaldrice2418]

Mike OG K tt

[@Lerryandterry]

MIKE MOTORCITY OG it's a Ford it can hold it

[@hilham89]

Really nice wish I would have seen this back in 2013 when you posted it.

[@bjsiau]

Not sure if that was the camera going out of focus or my eyes tearing up. Beautiful truck.

[@warrenhouser2740]

Damn a stocked utility bed and that would be the perfect truck. I would like that more than my 7.3l sd.

[@lewiemcneely9143]

Nice rig. I like a 3208 but in a truck they need a lot of gears. If you could shoehorn a 13-under in it you'd really have something but in this case an Allison would work just fine.

[@oby-1607]

Holy, your're not pulling 80,000. Its a pickup truck. Prob only needs a couple of gears.

[@sweetwolfasmraudio6726]

@@oby-1607 to get it moving at a decent speed yoy need more gears,

[@easytopleez33]

Now that is one BAD FORD!!!! Great Job!!!!

[@alvindueck8227]

damn fine lookin truck. started quick and easy. Did your recording device nor pick up the sound properly? you put a few tons of man hours into it, be a shame to let it go. with all the mods and adds, seems fitting to somehow add jake-breaks.

[@greasysteve5671]

How did you set up the air assist brakes?

[@TheMuskokaman]

Holy shoe-horned cat engines Batman! How in hell did you ever squeeze that sonofabitch in there?

[@thestudenttechnician2826]

if im not mistaken that was an engine option

[@AndyFromm]

+Alexander Anderson no

[@thestudenttechnician2826]

I thought they did in the 80s but was an expensive option

[@AndyFromm]

Maybe in a f650/f750

[@AndyFromm]

***** f350 is a 1 ton, a f650/f750 is not a 1 ton.

[@NSNorfolk]

Wow, most excelent. Wish I had those mechanical talents. Great job!!!

[@recyclebills]

Always wanted a V8 Cat in a pick-up.

[@seanhamby3920]

That's an epic truck bro. Sounds amazing.

[@2009mechanic]

She'd be a real stump puller with all that torque!!!

[@jorgefonseca9225]

that"s a really truck and a monster engine never die

[@wildcoyote34]

this is a very nice truck and very well done too michael smith mentioned wanting to see one with a detroit 2 stroke well there are SHITLOADS of them around ,, more people use 2 stroke detroits than anything else ,, I've seen 2-71 4-53 6V-53 6V-71 8V-71 and 8V-92 conversions I personally have a 1977 chevrolet 4x4 truck that has been rebuilt from the ground up including a new frame ,,sadly i built it 8 years ago before i knew about you tube or i would have lots of pics and videos of it being built the frame /rear axle are from a 1978 chevy C-80 bus ,,front axle and transfer case ,, from a 1977 ford F-800 ,, and the engine a 1974 model 8V-71 with eaton 13 speed transmission and live PTO like a tractor I built mine to do farm work and plow snow ,, it doesn't set any higher than this F250 highboy though ,, you think the bumpers on this truck are funny ,, try seeing that truck with a class 3 3-point hitch on the back and hydraulic lift on the front ,,,I can mount a 10 foot snow plow on the back and a 9ft on the front to clear parking lots in serious fast order ,, I have also pulled a 6bottom 16 inch plow and have also operated a 7 foot roto tiller and 9 foot mower ,,I also have a 7 foot 2 stage snowblower i can mount front or back ,, all of these are powered by the truck too I really need to get pics of it to show people just to see them scratch their head and say WTF is that ,,, i can tell you ,, it's what you get when John deere mates with a pickup truck

[@Capjohnsonmike]

Ya my buddy put a 453 in his ford one ton. It was awesome. Lol could here him .5 a mile away! This is sick though. We have 3208s in one of our crew boats. Tough little engines

[@paulskopic5844]

Detroit 2 strokes are a machine that turns diesel fuel into noise.

[@DrMcelroy]

The frame and running gear is definitely older than '77 but the rest of the truck is newer. Cab, bed, doghouse and grille are '78. The F250 emblems moved from the fender to the cab for the 77, 78 and 79 models. Headlights and gas door are other giveaways.

[@cleamilner6894]

My only question is: Why would you sell it? You'd never get out of it what you've got in it. May as well just keep it. I can tell by the cobwebs that it's been sitting a while. Probably want too much money for it.

[@bubbarub1839]

Yes Sir, This is what i call Muscle, and whoever done the Build, he has Muscle Brains!!! Sweet!!!

[@stuckinthemud9226]

Just for the record, that's a 78. Nice build but with the work put in to it, I hate to ever sell it. You would never get back what you put in to it.

[@cuda953]

the grills interchange with that years of truck. even though it has a 78 grille on it it still could be a 73

[@stuckinthemud9226]

jon delap

[@robertsaucier4082]

narrow frame,low pinion front axle and divorced t-case tells me that is def. not a 78.helluva motor for a badass truck.

[@stuckinthemud9226]

Robert Saucier

[@robertsaucier4082]

stuckinthemud probably 73...i don't see any reason for the owner to fib about it.

[@aequitasveritas5908]

JUST WATCHED FIRST TIME.SHE IS A DAMN GOOD LOOKING TRUCK. CAT PURS BOY. DAMN IT. I DRIVE 02 7.3 BUT I WOULD GIVE IT UP FOR THAT.

[@kingjames8283]

Back in the day, the CAT 3208 n/a was a common engine in the F-body and L-body Ford trucks. I never liked them even after they installed turbochargers which boosted hp ratings to 250 hp. They were slow to go when loaded and just never had any power. They were so noisy that I got headaches every time I drove one. The two most common trucks that had this engine were the F-750 non-turbo 5+2 Spicer, and the L-8000 turbo-charged 8-LL Roadranger. The F-750 school buses came with either a 5-sp wide ratio Spicer, or the 3-sp Allison Auto as I recall.

[@hiramabiff9545]

James Barrow what about the 6.9 idi?

[@kingjames8283]

Never drove Ford Trucks with the International Harvester engines. I have zero experience with the 6.9L diesels.

[@caseycouch1660]

I have to 2255 Olivers they both came from the factory with 3208 cats in them used for pulling now one is about 1200 the other is about 1500 horsepower no problem with durability

[@BITTYBOY121]

Very nice pickup truck - I loved watching this video of this great old American truck - Well done - Your truck is truly Awesome!

[@thepyrodude]

Read the comments yup bad ass truck and every one's bitch about exactly what year the truck is well your all kinda right sorta looks to me many different years were used doesn't have a married t - case so I'm going to say the chassis used is 73 to 76ish also the cab has all the ac unit under the hood a 77 to 78 it's all under the dash but there were mid year design changes the grill is definitely from a 77 pre square head lights those came in 78 the 77 2nd generation broncos used this same front clip so who ever built this truck used 73 Thru at least 77 parts to build it I've owned many of these in all years still have my 78 xlt ranger f250 400m 4 speed 2 speed t case

[@kennethhedden1846]

Nice,love the gauges and the purdy much original look.Sweet!!

[@ratroddiesels1981]

i will take her , good having an auto trans you have enough of gauges to keep busy !

[@davidmartin5179]

I built lots of 3208 long blocks and complete engines working at a CAT engine Reman shop years ago

[@michaelrichter8973]

Nice build these 3208 s are ok and you can turn them into little monsters take my advice don't let it idle for periods over ten minutes that's thier weakness ,don't spray enough oil on pistons to keep them cool if you must leave it idle put a throttle control on it run it up to 1200 rpms it will last a long time I've been a heavy euipment mechanic for longer than I care to admit I've deal,t with these engines in drill rigs rollers and back hoes after Learning to turn up idle speed our troubles went away the front half of the rock drills would set at idle wihle the rear ,drill engine was busy powering the drill we had new engines lock up at as little as 350 hours but after installing throttle locks and training the drill operators to set at around1200 to 1500 rpms these engines did a fine job admittedly their kind of small for a drill truck that proubaly wieghs 40 tons but they only move very little jobsite to jobsite is the highest milage when drilling they only move maybe twenty feet or so for every hole drilled for blasting !I've seen them installed in tandon log trucks. Very underpowered for this app.

[@greg657]

nice job on the truck.

[@anthonybonnelle786]

I'm not a Ford guy but I'd daily drive that and be proud

[@samhedrick4278]

Awesome truck, CAT over Cummins any day, idk what people say

[@boataxe4605]

Sam Hedrick Well, most Cat's but the 3208 was a piece of shit that burned oil even when new.

[@tdmjason]

Meh idk about that Cummins is a damn good engine also probably in more equipment that cat engines now.

[@natashaspiner42]

Yes Cummins is in more equipment now...but only because CAT stopped making truck engines. Only off road use, marine and generator applications now. Thank the government for that with their DEF regulations being forced on the manufacturers before it could really be perfected. CAT just said no thanks..we'll just stick with what makes us real money.

[@calspaugh8078]

Anyone that would pick Cummins over cat should stay the fuck away from me anyway...your crazy and I don't wanna talk to ya...

[@rednecktim3275]

No, Cummins is the best engine that was ever built, especially the 12valves

[@ceniciento367jvl7]

Excellent job Ford + CAT perfect combination

[@tannerwimer]

Probably a pretty dam good puller

[@dirtfarmer7472]

This was 10 years ago and still is a very nice video, 1 question the 3208 could it be resleeved ??? I don’t remember