Thank you sir got me a brand new pedal for my install! My truck had a previous swapped pedal so they messed up the original mount so I just made new holes and weld the nuts to the outside fire wall
@DIYWithTheRichardsons Жыл бұрын
You are welcome glad everything worked out
@builtonabudget67673 жыл бұрын
Hello i'm Built on a Budget and i'm building my daughter a 85 c10 on my channel, just found your channel and man you have a wealth of knowledge. I love the way you take your time to go line upon line and precept upon precept. Ive have learned alot and your wisdom will help make me wiser, Thanks looking forward to more of your vids
@DIYWithTheRichardsons3 жыл бұрын
Thank you I really appreciate that I look forward to watching your progress on your channel!!! Thanks for watching💪🏾
@DJSKID8083 жыл бұрын
There it is awesome thanks you ..... Thanks for the shout out .... Salute
@DIYWithTheRichardsons3 жыл бұрын
All good thanks for watching💯💯
@gregorybrazzil44343 жыл бұрын
Good information Brother ordering mine when I get back home.Thanks for the knowledge my brother be blessed.
@DIYWithTheRichardsons3 жыл бұрын
Yes sir thanks for watching!!
@danielalfaro49333 жыл бұрын
Thanks for dropping your knowledge 👍🏽👍🏽👍🏽
@DIYWithTheRichardsons3 жыл бұрын
Anytime bro thanks for watching!!
@kw6863 жыл бұрын
Glad you posted this ...thanks
@DIYWithTheRichardsons3 жыл бұрын
No prob bro!! Thanks for watching
@kw6863 жыл бұрын
@@DIYWithTheRichardsons that was some info I wasn’t aware of I haven’t gone through the LS book yet. Not sure if that’s in there or not.
@DIYWithTheRichardsons3 жыл бұрын
@@kw686 no it's not just info I found out!!
@lewispett123 жыл бұрын
Thanks greg. Good info
@DIYWithTheRichardsons3 жыл бұрын
No prob bro thanks for watching, 💯💯
@DizzKidz2 жыл бұрын
I think PSI ($45) makes a harness for this if you don't want to source the pigtails and build a harness. Thanks for posting this.
@DIYWithTheRichardsons2 жыл бұрын
Thanks for that information!!!
@DizzKidz2 жыл бұрын
@@DIYWithTheRichardsons I'll hit you back and let you know how it works. Should be in next week. If anything, I can try to make a video. I have the exact same TAC and pedal assembly as you. Uncomfortable to drive with that offset dbw truck pedal. The older style dbw pedal almost looks perfect.
@DizzKidz2 жыл бұрын
@@DIYWithTheRichardsons For anyone needing to do this EXACT conversion, PSI p/n HAR-1022-C10 is the harness built in this video. If you don't have the pigtails, it's a quality part to consider picking up. Thanks again for making this video!!!!
@DIYWithTheRichardsons2 жыл бұрын
@@DizzKidz it is just about in the perfect spot!
@leonsanchez528 Жыл бұрын
Bro, the pins that need to be swapped. Are those on the connector for the pedal pins or on the tac module pins?
@DIYWithTheRichardsons Жыл бұрын
It will be on the pedal side
@drptp50172 жыл бұрын
Good video bro. Very detailed. Anybody should be able to follow these instructions. If i have problems with this pedal swap can i contact you?
@LeandroJSilva-fj5fv2 жыл бұрын
Good videos, lots of information Can you tell me if a pedal sensor, module and throttle body can work by themselves without the main ecu?
@DIYWithTheRichardsons2 жыл бұрын
No they can’t they need the ecu to wirk
@brianmiller909 Жыл бұрын
What’s the stem on the top of the c10 pedal,is it a speed sensor or throttle sensor?
@DIYWithTheRichardsons Жыл бұрын
I’m not sure which one you are talking about?
@joeade3087 Жыл бұрын
Thanks for the swap info and explaining the difference between the different types. I've watched several of your videos and found them very helpful. I have a suggestion I hope may be just as helpful. Please consider loosing the music. Based on your production quality I'll assume you're using your cell phone. The audio and video quality are less than ideal. The added music makes it difficult to hear you or concentrate on what you're saying. Imagine having something really important to say to a family member and all they can hear is music. Thanks for what you do! Best wishes!
@DIYWithTheRichardsons Жыл бұрын
Thanks for watching and the advice I’m looking into a new camera setup for when I start back videoing
@isaacnahuatt14962 жыл бұрын
99-02 was drive by cable for gen 3s
@DIYWithTheRichardsons2 жыл бұрын
Top of the line vehicles like Cadillac trucks GMC Denali was DBW first generation throttle body. they looked like a DBC throttle bodies with three different wire harness , IAC . TPS IAT 03 to 07 was all DBW second Gen only one electrical connections
@jesseg5738 ай бұрын
I have a 05 5.3 dbw im swapping into a 71 c10 i bought a brand new harness i need a pedal my harness has a pedal tac sensor would i still need a tac module when a but the pedal ?
@jesseg5738 ай бұрын
Buy*
@DIYWithTheRichardsons8 ай бұрын
Yes
@jesseg5738 ай бұрын
Can u send a link to both parts ? Electric dbw pedal and tac module please for ls swap
@timtirrill9472 жыл бұрын
was wondering if you got the wire harness for the pedal why did you have to cut it to plug it into the pedal ?
@DIYWithTheRichardsons2 жыл бұрын
In order to make that pedal work for a gen3 tach module I cut it to put the right connector end for that pedal and I switched the pin out for it to communicate the right signals but you can use the donor pedal and wire harness as is but it will take a lot of modifications to fit right on your floor board .
@scottschaos43768 ай бұрын
Okay man. Okay. I have questions and you may have answers. I have an 04 5.3, TAC, pedal, and harness all from the same truck. I have no throttle response. I’ve replaced the TAC module, the TPS, and the throttle body. Still no response. Do you have any suggestions
@DIYWithTheRichardsons8 ай бұрын
Have you swapped pedals?
@scottschaos43768 ай бұрын
@@DIYWithTheRichardsons I haven’t. I have the original pedal and have tested it. It appears that it has the correct voltages. On the APPS1 wire it responds to the pedal. The APPS2 wire responds to the pedal. (Into the TAC) I get no change on the TB motor 1 or motor 2 wires. The original TAC has a “C” denoted on it. The replacement TAC has a “K” denoted on it. Both TAC modules are the Gen3 module. I’m not sure what the letter designation is.
@DIYWithTheRichardsons8 ай бұрын
@scottschaos4376 is the vehicle running when you lose tach signal or you trying to move the throttle with vehicle off ?
@scottschaos43768 ай бұрын
@@DIYWithTheRichardsons I’ve tried it both ways. Vehicle running. And key on vehicle not running
@copastedy Жыл бұрын
Great instructions! However, I have an issue. I currently have no throttle response in Park. What could be causing this issue? I do have throttle response in reverse, drive, etc., just not while in park.
@DIYWithTheRichardsons Жыл бұрын
What gen engine you have?
@copastedy Жыл бұрын
@@DIYWithTheRichardsons My LS is an LQ9, pulled from a 2003 Cadillac Escalade.
@DIYWithTheRichardsons Жыл бұрын
Did you use the harness and tac module from the same vehicle?
@copastedy Жыл бұрын
@@DIYWithTheRichardsonsNo, I used a harness / tac module from a different vehicle, specifically a 2002 Chevy Truck. Could it be programing? I currently have the basic tune for start-up. Also, do you have a fuel line kit recommendation. I had a leak, using Evil's PTFE 6AN fuel line kit. Can't seem to redo the stretched PTFE fuel line, the adapter only screws half way down. This occurred on 3 fuel lines.
@DIYWithTheRichardsons Жыл бұрын
Ok I believe that’s your problem the 03 should have blue /green connectors for ecu and the 02 has blue / red connectors for ecu. You have to have the right tac module for your ecu . Watch my video again to see the difference in tac modules if you have a 03 ecu use the tac module with the metal back , if you are using an 02 ecu use the all black tac module that should fix your problem and as for the fuel lines I just use regular an -6 or -8 lines from evil unless you are running e85
@Jbone27374 ай бұрын
🦾🙏🏽
@chevybrat2 жыл бұрын
Nice presentation! I have searched for the pedal on Amazon for the 3500, but came up with nothing. Would you have a part number for it? Or what description did you type in, or keyword? Thanks
@DIYWithTheRichardsons2 жыл бұрын
1995 to 2000 c3500 gas pedal
@chevybrat2 жыл бұрын
@@DIYWithTheRichardsons thank you sir, I found them. Now I’ll look to see which tack module I have.
@PappyDan3 жыл бұрын
so bro did you drink a cold beer after figuring out this headache, great job.
@DIYWithTheRichardsons3 жыл бұрын
It took a while lol !! Thanks for watching!! 💪🏾💪🏾
@kennethmartinez774882 жыл бұрын
Lq4 6.0? If so what tac module did you use for that pedal?
@DIYWithTheRichardsons2 жыл бұрын
Depends on year 99 to 02 use the all black plastic 03 to 06 use black plastic with metal back
@kylesoderstrom7403 Жыл бұрын
Awesome video only question I have is I pulled a LQ9 out of my 2004 Cadillac and I'm going to swap it in my 1979 k5 blazer. I wanna use this pedal for my blazer since it will be a direct bolt on for my dbw intake but I'm not using my stock engine harness/stock ecu that I pulled out of the Cadillac. I bought a Holley terminator Maxx engine harness. I wonder if it will work with the pedal, tac module and harness for the tac module that I pulled out of the Cadillac.
@DIYWithTheRichardsons Жыл бұрын
I’ve been looking in swapping to Holley and I was going to look into there pedal pin out so when I find out some information I will make a video on the process
@ftwloco2 жыл бұрын
So I tried this but it didn’t work for me but I’m running a different throttle body a 4bolt 90mm any help???
@DIYWithTheRichardsons2 жыл бұрын
Sounds like you have a gen4 engine this only works for gen 3 ECUs give me more info
@ftwloco2 жыл бұрын
@@DIYWithTheRichardsons the donor vehicle is a 04 Escalade blue green ecu decided to go with a tbss intanke with 4 bolt 90mm so had to get the xlink adapter for the throttle body to function I still have the stock pedal(big and bulky) and it works fine with that but won’t work with the pin out like shown in the video where I can use the diesel pedal
@DIYWithTheRichardsons2 жыл бұрын
@@ftwloco did you swap the pin out like I showed on the video
@gekae24 Жыл бұрын
How did you solve the sensitivity issue with this pedal?
@DIYWithTheRichardsons Жыл бұрын
I didn’t have any sensitivity issues described your issues
@gekae24 Жыл бұрын
@@DIYWithTheRichardsons very touchy pedal, slight wind and it goes. Driving hit a bump and my foot moves the pedal just a bit and revs go up
@DIYWithTheRichardsons Жыл бұрын
@@gekae24 has the engine been modified like heads , cam or is it stock because a modified engine will be more responsive
@gekae24 Жыл бұрын
@@DIYWithTheRichardsons btr stage 2 cam, read on few forums that this a common problem with this setup lm7 5.3 c10
@DIYWithTheRichardsons Жыл бұрын
You might have to take it to a tuner because you can change the sensitivity in hp tuners
@DJSKID8083 жыл бұрын
Question I swap is complete great fuel pressure but when i crank it uo it starts for a couple seconds then shuts off any info on why i was thinkint the anti theft system needs disabled of pcm needs vatted or tuned
@DIYWithTheRichardsons3 жыл бұрын
Sounds like VATS not deleted in tune
@DJSKID8083 жыл бұрын
@@DIYWithTheRichardsons Thanks again im getting vats deleted as we speak ....
@kw6862 жыл бұрын
What HP Tuner module do you have?
@DIYWithTheRichardsons2 жыл бұрын
Mpvi 2
@kw6862 жыл бұрын
@@DIYWithTheRichardsons I have been looking at that and I assume that’s along with 2 credits?
@DIYWithTheRichardsons2 жыл бұрын
@@kw686 yeah depends on where you buy it but they have a new one out now
@adammancilla47742 жыл бұрын
Hey man but my throttle body drive don’t fits on my harness what can I do
@DIYWithTheRichardsons2 жыл бұрын
Ok what throttle body you have?
@adammancilla47742 жыл бұрын
I have both one by cable and one by wire
@DIYWithTheRichardsons2 жыл бұрын
What year harness you have
@adammancilla47742 жыл бұрын
I got 1988 to 1995 Chevy 1500
@adammancilla47742 жыл бұрын
14YW69C
@DJSKID8083 жыл бұрын
Where can i purchase Hp Tunes D.I.Y Richardsons
@DIYWithTheRichardsons3 жыл бұрын
You can go to go tuners.com to buy the software but be careful and make sure to learn how to tune if you are going to get it because it's a lot you can do with it and just one push of the wrong button can destroy your engine
@DJSKID8083 жыл бұрын
@@DIYWithTheRichardsons Thanks i will take caution using it if i get it
@nightcrawler5683 жыл бұрын
I swapped a ls1 5.3 2005. do you know the DBW PN. I want to swap to a lokar but need the part number, or can you tell me where its located. love the way you explain.
@DIYWithTheRichardsons3 жыл бұрын
You can Google the year and make of the engine you have and find the pin out and you need the pin out for the lokar pedal to make it work
@eliashrodriguez66512 жыл бұрын
Can I use my 2011 camaro ss pedal for my c10?
@DIYWithTheRichardsons2 жыл бұрын
Sure if you want to modify it to fit also you would need a gen4 ecu for that pedal
@612youngg Жыл бұрын
Intro is horrible so much distortion
@DIYWithTheRichardsons Жыл бұрын
I been stop using an intro further more God has you one thing that’s a free will as soon as you saw that horrible intro you should have turned it off and not commented on my channel now you have a wonderful day!!